1C: Enterprise Accounting, revision 3.0 - the first version of the configuration, which provides the ability to customize the interface. On the one hand, this feature compensates for the cardinal differences in the appearance of the new version from the previous one - 1C 8.2. On the other hand, it gives users flexible options for customizing the workspace, focusing only on existing needs, their own convenience and individual taste.

It is worth noting that during the existence of the 3.0 edition, which works accordingly on the 1C: Enterprise 8.3 platform, the interface has undergone several changes. In particular, the number of available interface options has been increased, including:

• Standard (as in previous versions of 1C: Accounting 8)
• Taxi

Standard

When version 3.0 was released, its interface was identical in structure to version 8.2, but different in design: the names of the sub-items of the upper horizontal menu were expanded, and icons were added.

A visual comparison of revisions 3.0 and 2.0 shows that the interface structure has remained unchanged.

Clicking on a menu item brought up a drop-down list, and in the new version, the sub-items are displayed as tabs.

Since this type of interface was the first, it remains the most popular. You can change its structure by going to "Administration-Program Settings" - item "Interface".

allows you to access a submenu without closing the active window. *

* Horizontal menus:

• Section panel, located directly below the main menu;
• A bar of actions or commands available in the selected section.

The vertical navigation bar displays the structure of the section's content.

Using the sub-menu items, you can customize the content of the panels and their display at the request of the user.

(next item) allows you to add and remove sections, as well as items of the main horizontal menu, up to its complete removal.

allows you to open additional windows under the main menu - standard reports, information, contacting technical support (horses essentially duplicate the vertical panel).

allows you to add / remove submenu items, which previously could only be done with the participation of programmers.

Taxi

In the Taxi interface, the sections panel is initially on the left.

Implementation of customization of panels in this interface is carried out by dragging and grouping panels at the request of the user in a special editor window.

The panel editor window allows you to group by drag and drop, add and remove panels such as the section panel, open panel, toolbar *, function panel of the current section, favorites panel, history panel.

* The panels at the top of the editor window are currently active.

Section sub-items are configured (vertical sections panel) after their activation (the sub-item settings button is in the upper right corner).

The action bar customization window allows you to add and delete sections, up to complete deletion.

A nuance of the interface: selected sub-items are marked with asterisks

* External improvements are often added here

Similar to the interface of revision 7.7

The menu structure is very similar to the standard version.

The 7.7 customization option is located on the top right panel (down arrow), which allows you to add and remove buttons. It is active on all interfaces.

This article will be useful for users of "1C: Enterprise 8.3", regardless of which of the configurations you are working in. It can be "1C: Enterprise Accounting 8" or "1C: Salary and Personnel Management 8", but there are a number of general issues that are often encountered at the initial stage of work. Many users of previous versions are confused about finding the irreplaceable All Functions command (analogous to the Operations menu ...) and trying to benefit from the managed interface. Therefore, we will consider the important points that should not be overlooked when we start working in the program of the new version 3.0.

First of all, we set up the display of the "All functions" command in the main menu, which is represented by such an icon in the upper left corner. To do this, set the appropriate checkbox in the parameters located in the "Service" section.

Now it will not be difficult to find any object, we will need a document, reference book or register, just call the "Main menu" and select "All functions".

As for the interface, we, as users, are given the opportunity to customize it "for ourselves". This opportunity should not be missed, therefore, in the same main menu, we turn to the "View" section.

We see several types of settings in the menu. To begin with, we determine the location of the panels, select the "Panel Settings" item.

This is how the standard arrangement of panels looks like, we can return to it after our experiments at any time by clicking the button of the same name. The panel editor allows you to select a panel with the left mouse button and drag it to the area we need, that is, where we would like to see it. Suppose it would be more convenient to work with the section panel located at the top, and not on the side, then move it to the upper area and click the "Apply" button to see how the program's appearance has changed. If the setting is successful, click "OK" to save.

In the lower part, on a gray background, inactive panels are presented, in fact, we can refer to such types of information through the toolbar. For example, to the history of actions and the list of favorites using the "Stories" and "Favorites" tools, respectively.

But if necessary, you can fix such a panel in a place convenient for you, for example, in this way.

Speaking specifically about the section panel, it can also be configured by opening the corresponding setting.

We can create a list of sections ourselves that suits our needs. We also choose how this list will be presented with or without a picture; if with a picture, then where to place it relative to the text. For example, a setting without a picture allows you to see all sections when the menu is located at the top.

The initial page is also individually configurable; from the available forms, add the required ones to the left or to the right column using the buttons.

After such simple manipulations, the interface is significantly transformed, and for the better, because you customize it specifically for your needs. A comfortable workplace plays an important role in the life of an accountant.

This is the second part of an article about setting up the Taxi interface that appeared in the 1C: Enterprise 8.3 application. In I talked about how to add new panels to the interface and change their arrangement according to your preferences. In the second part I will teach you how to manage application sections and their content, as well as change the parameters of the initial page of the interface.

In the screenshot below, the interface looks like we made it look in the last lesson. For me, such a working view is not very convenient. I prefer to have the section panel on the left as it is by default. And it's not just a matter of habit. It's just that when all the sections are compactly collected on one side, you can cover them all at a glance, which cannot be said about the stretched menu at the top of the interface.

But since the sidebar is taking up too much space in the screenshots, I'll leave the sections where we moved them. Although I recommend that you leave this menu where the developers themselves put it.

Hereinafter, screenshots created using "1C: Salary and Human Resource Management 3.0" are used, but, as I said in the previous article, these settings are relevant for all new configurations, since the "Taxi" interface is used in them too.

So, the next function that I want to tell you about is customizing the section panels. It allows you to remove individual sections from the interface.

Here the question may arise as to why someone might need to delete entire sections of operations from the program. In fact, everything is very simple. Let's say you have a small company in which only one employee deals with personnel and salaries. Of course, in this case, nothing can be deleted, since from time to time he will use all the available tools.

But suppose you have an HR specialist on staff, and a payroll accountant. The personnel officer does not need a payroll calculation, and the accountant does not need personnel operations. Therefore, each of these specialists can be left with only those sections that they really need, so that unnecessary elements do not distract your employees from their work.

Of course, some objects, within the framework of their powers, are used by both personnel officers and accountants. For example, sick leave or leave. But, as a rule, access to such objects is duplicated in the corresponding sections.

To delete or add a previously deleted section, you need to select the "Section Panel Settings" function in the "View" settings subsection.

In the window that opens, it is easy to remove any elements from the interface and return them back. This can be done in several ways.

First, you can use the "Add", "Add All", "Remove" and "Remove All" buttons. If you do not use the button that deletes or adds all possible objects, then the action will affect only the selected objects.

In order to select several consecutive menu items, you need to select the upper one with the mouse, and then, holding Shift, click on the lower object of the selected group.

In order to select several objects in any order, you need to mark them with the mouse while holding down the Ctrl key.

Secondly, you can add or remove objects by simply dragging the mouse.

But the third way is closer to me. Following it, you just need to double-click on the desired object. If it is located among the available objects, it will immediately become selected, otherwise it will be transferred from the selected to the available ones.

At the top right, you see two blue arrows. They are needed in order to change the order of the items in the menu.

Now, using the knowledge gained, let's remove the "Salary", "Payments" and "Taxes and Contributions" items from the section panel, and raise the "Administration" section to the top of the list of selected sections.

Now let's accept the changes and see how our menu looks.

Everything turned out as we had planned. To quickly return everything back, you need to go to the section panel settings again, click the "More" button, select the "Set default settings" option and accept the changes.

It is no coincidence that I spent so much time describing these actions, since they are widely used in all 1C: Enterprise 8.3 configurations and we will need them in the following examples.

The next thing I want to tell you about is customizing the start page. Now it hangs an invitation to configure the system from scratch or transfer data from other configurations, but in the future, when the program is configured, other data will be displayed there. For example, if we talk about the configuration "1C: Salary and HR 3.0", then it can be the staffing table and the history of accruals made.

To manage the settings of the start page, you need to go to "View", "Setting up the start page".

As you can see, everything is the same here as in the settings of the section panel. The only difference is that the start page also provides for the activation of the second column, which can be activated by adding some of the available forms there. But you should only do this if you have a large enough display. Otherwise, the second column will only get in the way, eating away the work space.

You can experiment with customizing your Home screen yourself. You can return everything to the default settings in the same way as we did after setting up the section panel.

The workspace of each section is divided into a navigation bar and an action bar. Visually, they do not differ from each other, so for clarity, I marked the navigation bar in the next screenshot with a red stroke.

Through the navigation bar, the user gains access to lists of reports, documents, and so on. And with the help of the action bar, he can immediately create a document, a report and the same "and so on."

For clarity, let's look again at the previous screenshot illustrating the Salary section. As you can see, in the navigation panel, which I have circled with a red frame, there is a section "Sick lists". If you click on it, a list of all sick leaves will open, which we have so far empty. Here you can create a new sick leave by clicking the "Create" button.

But in the same section "Salary", in the action menu, there is also an item "Sick list" located under the eloquent heading "Create". By selecting it, you will create exactly the same sick leave as in the previous example, but for this you do not have to go to their general list and click an additional button.

The content of the navigation bars and actions can also be controlled. Therefore, if you are sure that some function should be in a certain section, but it is not there, it may simply not have been added to the list. You can do this yourself using the "Customize Navigation" and "Customize Actions" features. This is done in the same way as setting up partitions and the start screen.

Check out how this section began to look after I enabled all the functions available for it.

It's just some kind of porridge, isn't it? All actions do not fit on the screen, even if you expand it, and to see them all, you have to use the scroll bar. Therefore, it is advisable to activate only those functions in the action menu that are really needed quite often. The same documents that you need much less often, it is better to create by navigating to them through the navigation bar, and not include them in the action bar.

Here it will be useful to remind you that access to any 1C: Enterprise 8.3 object in the Taxi interface can be obtained through the All functions option, which I wrote about in the first part of the article.

In the upper right corner of the "Taxi" interface, there is a panel with buttons that duplicate some of the application's functions. You yourself can choose which buttons will be displayed in this panel. To do this, you need to use the "Add or remove buttons" function and mark with the checkboxes those that you need most often, as shown in the screenshot below.

This concludes the article on setting up the "Taxi" interface. Next time I will tell you how to get started in the 1C: Salary and Enterprise Management 3.0 configuration.

In this article I will tell you how to customize the interface of the Taxi program for comfortable work, so that all the necessary buttons and the most necessary reports are always at hand.

1) Let's start with the most common question from my favorite clients, related to the lack of the "Operations" menu. Many accountants used it to search for reports, processings, documents that were sometimes very difficult to find in other sections of the program.

As such, there is no Operations menu in Accounting 3.0. Its counterpart is called "All functions" and by default the display of this section in the program is not set. To turn it on, you need to enter the menu, which opens using the orange button with a triangle in the upper left corner of the program. In the list that appears, select the "Service" section and open the "Parameters" section.

In the window that opens, set the checkbox "Display the command" All functions "and fix the result by clicking the" Apply "button.

Now in the same Main menu (orange button with a triangle) we see the section "All functions"

In which everything that we are so used to seeing in Accounting 2.0 in the section "Operations":

2) Now let's consider the possibilities of the program in terms of customizing the TAXI interface. For example, now my program looks like this:

Those. sections above. Open windows in tabs at the bottom. Let's see how to change the arrangement of all elements of the working window of the program. Open the main menu again and find the "Panel Settings" section.

Then everything is simple. With the left mouse button, grab the section whose position we want to change and drag it to where we want to see this panel. For example, like this: I will move the "Open panel" to the top, and drag the "Section panel" to the left side of the window.

We press the button "Apply" or "Ok" and voila, this is how our program began to look:

Perhaps it will be more convenient for someone to work this way.

3) One more advice on setting up the program. As a rule, each accountant has some sections or reports that he uses on a daily basis. Well, for example, SALT or SALT according to the account. And it would be very convenient if they are always there, always at hand. This can be achieved in a very simple way by placing the required reports in the "Favorites" section. Find the balance sheet in the "Reports" section. Hovering over it to point the mouse, we see next to a gray asterisk.

By clicking on it, we mark the selected report as "Favorites"

Section "Favorites"using the panel editor already known to us, we will place, for example, at the bottom of the working window of the program.

4) And one more "secret" for setting up the program interface. In various sections of the program there are documents that some people never use. Well, just by virtue of the specifics of the organization's activities. For example, in the "Purchases" section, documents related to EGAIS.

We do not need these documents and we can remove them from the desktop. To do this, in the edited section in the upper right corner, click on the gear and in the menu that appears, select the item "Navigation settings"

In the window that appears, we see two columns. On the left are commands that can be added to our desktop. And on the right, those commands that are on our desktop. We find the EGAIS section on the right column and click on the "Delete" button

Accordingly, the documents that are in the right column can be added to the desktop by clicking the "Add" button

5) And finally, for those who do not want to get used to the Taxi interface. You can change the interface to the one that was in the first versions of Accounting 3.0.

In the section "Administration" we find the item "Interface"

Here the developers offered us the choice to change the program interface to the same as in previous versions 8.3 and similar to Accounting 7.7. Having chosen the appearance of the program that interests us, it will have to be restarted.

This is how the program will look like with the previous interface.

For interest, let's see what the interface is, similar to Accounting 7.7.

I don’t know, I don’t know. I'll probably return to my usual "Taxi".

Well, that's all that I wanted to tell you today. I hope some information will be useful to you while working with the program.

Subsystem in 1C 8.3- a metadata tree object that is responsible for building the configuration command interface.

Below in the article we will talk about subsystems starting from version 8.2.

The fact is that in version 8.1 (as well as for a regular application 8.2) there were also subsystems, but they served completely different purposes, more for the developer than for the user. Subsystems in 8.1 usually separated different functionality. Also, the subsystems helped when combining different 1C configurations - it was possible to specify which system to transfer.

1C subsystems and an interface for the programmer

In versions 8.3 and 8.2, subsystems are the primary tool for building a command user interface. Metadata objects "Subsystems" have a hierarchical structure, in order to configure the "submenu" in the interface, you need to add a subordinate subsystem:

Properties and settings

Consider the settings and properties of subsystems in the configurator:

Get 267 1C video tutorials for free:

Include in command interface- if you forgot to set this flag, subsystem will not be displayed in the interface.

The button opens the interface settings panel, where you can configure interfaces depending on the role of the current user:

Picture- the picture assigned to the subsystem is displayed in enterprise mode. You can choose a standard picture, or you can add your own, having previously created it as a configuration object Picture:

In the tab Functional options the list of functional options in which this subsystem is used is indicated.

Tab Composition defines a set of metadata objects participating in a given subsystem.

In the tab Other you can describe the help to the subsystem and specify the setting Include in help content- whether to include this help topic in general configuration help information.

If no report or processing is displayed in the managed interface

This problem very often arises among novice developers - like a report or processing was added to the subsystem, but it is not visible.

The first reason for this might be that the object does not have a managed form defined.

The second reason is that the "Use standard commands" checkbox is checked on the Commands tab of the object. This is due to the fact that to open the processing, both your own procedure can be described, and the standard one can be used: