Cheat codes in the game Skyrim 5 (The Elder Scrolls V: Skyrim) allow you to customize the game at your discretion.
How to enter codes:
- Press the "~" (tilde) key to open the console window.
- Enter the required code (all codes are listed below).
- Press the “Enter” key to run the code.
- Press the "Esc" key to close the console window.
Rules for entering codes:
- The commands are case insensitive (that is, the letters "A" and "a" are identical).
- Some codes contain square bracket symbols - . This means that instead of these brackets you need to enter any suitable value. The bracket characters themselves do not need to be entered. For example: instead of Player.SetAV [#], enter Player.SetAV HeavyArmor 100.
All cheat codes for Skyrim 5
Codes for character improvement
Skyrim 5 codes - Hero's superpowers
T.G.M. | Enable character immortality, infinite weapon charges, infinite carry weight |
TCL | Enable the ability to walk through walls |
Player.SetAV Invisibility 1 | Turn on invisibility. Neither enemies nor allies will notice you. (To disable invisibility, enter 0 instead of 1) |
Player.SetAV SpeedMult [#] | Set running speed as a percentage. (default: 100%) |
SetGS fJumpHeightMin [#] | Set jumping height (default: 100%) |
Player.SetAV AttackDamageMult [#] | Increase weapon damage by # times |
Player.SetAV LeftWeaponSpeedMult [#] | Increase the attack speed of your off-hand weapon by # times |
Player.SetAV WeaponSpeedMult [#] | Increase the attack speed of off-hand weapons and two-handed weapons by # times (all two-handed weapons count as off-hand weapons) |
P.S.B. | Get all spells, abilities, shouts of power (Attention! leads to game instability, not recommended for use) |
Skyrim 5 codes - Main characteristics of the hero
ShowRaceMenu | Change the character's race. Allows you to go back to the character customization menu (Attention! After entering this code, the character's skills may be reset) |
Player.AdvLevel | Raise character level |
Player.SetLevel [#] | Set the required character level |
Player.SetAV Health [#] | Set max. number of lives in # units |
Player.SetAV Magicka [#] | Set max. amount of magic in # units |
Player.SetAV Stamina [#] | Set max. amount of reserve strength in # units. If you set the value to a high value, the character will not get tired while running |
Player.ModAV CarryWeight [#] | Increase character's maximum carrying capacity by # units |
Player.SetScale [#] | Increase your character's height, where #: 1 - 100%, 1.1 - 110%, 0.9 - 90%, etc. |
Codes in the game Skyrim - Character Skills
Increased Experience in Skills:
AdvSkill Onehanded 999999 | develop the “one-handed weapon” skill to 999999 experience |
AdvSkill Twohanded 999999 | Two-handed weapon |
AdvSkill Marksman 999999 | shooting |
AdvSkill Block 999999 | block |
AdvSkill Smithing 999999 | blacksmith craft |
AdvSkill HeavyArmor 999999 | heavy armor |
AdvSkill LightArmor 999999 | light armor |
AdvSkill Pickpocket 999999 | pickpocketing |
AdvSkill Lockpicking 999999 | breaking |
AdvSkill Sneak 999999 | secrecy |
AdvSkill Alchemy 999999 | alchemy |
AdvSkill Speechcraft 999999 | eloquence |
AdvSkill Alteration 999999 | change |
AdvSkill Conjuration 999999 | witchcraft |
AdvSkill Destruction 999999 | destruction |
AdvSkill Illusion 999999 | illusion |
AdvSkill Restoration 999999 | recovery |
AdvSkill Enchanting 999999 | enchantment |
Setting the skill level:
Player.SetAV Onehanded 100 | raise "one-handed weapon" to level 100 |
Player.SetAV Twohanded 100 | Two-handed weapon |
Player.SetAV Marksman 100 | shooting |
Player.SetAV Block 100 | block |
Player.SetAV Smithing 100 | blacksmith craft |
Player.SetAV HeavyArmor 100 | heavy armor |
Player.SetAV LightArmor 100 | light armor |
Player.SetAV Pickpocket 100 | pickpocketing |
Player.SetAV Lockpicking 100 | breaking |
Player.SetAV Sneak 100 | secrecy |
Player.SetAV Alchemy 100 | alchemy |
Player.SetAV Speechcraft 100 | eloquence |
Player.SetAV Alteration 100 | change |
Player.SetAV Conjuration 100 | witchcraft |
Player.SetAV Destruction 100 | destruction |
Player.SetAV Illusion 100 | illusion |
Player.SetAV Restoration 100 | recovery |
Player.SetAV Enchanting 100 | enchantment |
Codes in the game Skyrim - Character Perks
Using these cheat codes for Skyrim, you can quickly upgrade all your skills and get all the perks. To do this we will need the following cheats:
To pump up all the perks, do the following:
- Using the AdvSkill [X] cheat, we raise any skill to level 100:
- Example: AdvSkill Destruction 999999.
- We use the code Player.SetAV [N] 0 - set the skill level to 0.
- Example: Player.SetAV Destruction 100.
- After this, you can again add new experience to this skill. We repeat points 1 and 2 to earn more ability points. From time to time we lower the character's level to the previous value.
- We spend the points we earn, which are several times more than usual, to purchase all the available perks in Skyrim.
All perks and spells can be added manually if you know their exact name.
Player.AddPerk [name] | Add ability |
Player.RemovePerk [name] | Remove ability. Ability Points will not be refunded |
Player.AddSpell [name] | Add a magical ability to the player character |
Player.RemoveSpell [name] | Remove ability |
Skyrim codes - Increase damage from weapons, spells
These codes increase the effectiveness of skills by the required percentage (base value * N%). For combat skills, this means an increase in damage from all attacks and spells of this type.
Example: Player.SetAV DestructionPowerMod 100
This code will increase the damage from destruction spells by 100%, that is, twice.
Player.SetAV OneHandedPowerMod [#] | increase damage from one-handed weapons by # percent |
Player.SetAV TwoHandedPowerMod [#] | Two-handed weapon |
Player.SetAV MarksmanPowerMod [#] | shooting |
Player.SetAV BlockPowerMod [#] | block |
Player.SetAV SmithingPowerMod [#] | blacksmith craft |
Player.SetAV HeavyArmorPowerMod [#] | heavy armor |
Player.SetAV LightArmorPowerMod [#] | light armor |
Player.SetAV PickPocketPowerMod [#] | pickpocketing |
Player.SetAV LockpickingPowerMod [#] | breaking |
Player.SetAV SneakPowerMod [#] | secrecy |
Player.SetAV AlchemyPowerMod [#] | alchemy |
Player.SetAV SpeechcraftPowerMod [#] | eloquence |
Player.SetAV AlterationPowerMod [#] | change |
Player.SetAV ConjurationPowerMod [#] | witchcraft |
Player.SetAV DestructionPowerMod [#] | destruction |
Player.SetAV IllusionPowerMod [#] | illusion |
Player.SetAV RestorationPowerMod [#] | recovery |
Player.SetAV EnchantingPowerMod [#] | enchantment |
Codes from Skyrim - Screams of Dragons
Each line of the table contains three codes. You can only enter one of the three.
Player.TeachWord [shout code] | Learn the word of power |
Player.TeachWord 46B89 Player.TeachWord 46B8A Player.TeachWord 46B8B |
Call of the Dragon |
Player.TeachWord 13E22 Player.TeachWord 13E23 Player.TeachWord 13E24 |
Ruthless force |
Player.TeachWord 602A3 Player.TeachWord 602A4 Player.TeachWord 602A5 |
Ice form |
Player.TeachWord 6029A Player.TeachWord 6029B Player.TeachWord 6029C |
Storm Call |
Player.TeachWord 20E17 Player.TeachWord 20E18 Player.TeachWord 20E19 |
Fire Breath |
Player.TeachWord 48ACA Player.TeachWord 48ACB Player.TeachWord 48ACC |
Time dilation |
Player.TeachWord 2F7BB Player.TeachWord 2F7BC Player.TeachWord 2F7BD |
Swift Dash |
Player.TeachWord 60291 Player.TeachWord 60292 Player.TeachWord 60293 |
Friendship with animals |
Player.TeachWord 3291D Player.TeachWord 3291E Player.TeachWord 3291F |
Elemental Fury |
Player.TeachWord 32917 Player.TeachWord 32918 Player.TeachWord 32919 |
Ethereality |
Player.TeachWord 5D16C Player.TeachWord 5D16D Player.TeachWord 5D16E |
Frost Breath |
Player.TeachWord 602A0 Player.TeachWord 602A1 Player.TeachWord 602A2 |
Voice cast |
Player.TeachWord 5FB95 Player.TeachWord 5FB96 Player.TeachWord 5FB97 |
Disarmament |
Player.TeachWord 3CD31 Player.TeachWord 3DC32 Player.TeachWord 3CD33 |
Clear sky |
Player.TeachWord 51960 Player.TeachWord 51961 Player.TeachWord 51962 |
Call of Valor |
Player.TeachWord 44251 Player.TeachWord 44252 Player.TeachWord 44253 |
Dragon Slayer |
Player.TeachWord 60297 Player.TeachWord 60298 Player.TeachWord 60299 |
Death Sentence |
Player.TeachWord 60294 Player.TeachWord 60295 Player.TeachWord 60296 |
Whisper of aura |
Player.TeachWord 6029D Player.TeachWord 6029E Player.TeachWord 6029F |
World of kin |
Player.TeachWord 3291A Player.TeachWord 3291B Player.TeachWord 3291C |
Fright |
Screams from the Skyrim: Dawnguard DLC
Player.TeachWord 02008A65 Player.TeachWord 02008A64 Player.TeachWord 02008A63 |
Life Drain |
Player.TeachWord 020030D4 Player.TeachWord 020030D6 Player.TeachWord 020030D7 |
Summoning Durnevir |
Player.TeachWord 02007CB7 Player.TeachWord 02007CB8 Player.TeachWord 02007CB9 |
Soul Rip |
Player.TeachWord 0201A162 Player.TeachWord 0201A163 Player.TeachWord 0201A164 |
Call from the Cairn of Souls |
Skyrim: Dragonborn DLC Shouts
Open Dragon Shouts must be activated with Dragon Souls before use. In the game, Souls are given only for killing dragons. Using codes you can add the necessary Souls to your inventory:
To activate dragon screams, press: “Tab” – “Magic” – “Screams”, select a scream, press “R” – “Ok”. After this, the selected shout can be used.
TES 5: Skyrim codes - Cure diseases
Player.AddSpell 00092C48 | Lycanthropy- a spell to transform into a werewolf. Appears in the "Talents" section. To activate use the "Z" key. This talent cannot be removed. The transformation back into a human will occur automatically, after a certain period of time. |
Player.AddSpell 000B8780 | Vampirism– the disease “Sanguinare Vampiris” appears. 3 days after infection, you have a 10% chance of becoming a vampire. If, 3 days after using this code, “Vulnerability to Fire” appears in the “Magic” - “Active Effects” section, you are a vampire. If nothing works, use the command Player.RemoveSpell 000B8780, and then again Player.AddSpell 000B8780 |
Player.RemoveSpell 000B8780 | Cure from vampirism - the disease “Sanguinare Vampiris”. Acts only at the first stage of transformation (after the bite). After a complete transformation into a vampire, this code does not work! |
SetStage 000EAFD5 10 ResetQuest 000EAFD5 |
Cure from vampirism. Can cure any stage of the disease. The cure occurs by completing the quest, so to apply the code a second time, you must first reset the quest with the command “ResetQuest 000EAFD5”, then type “SetStage 000EAFD5 10” again. (Save before resetting quests) |
Codes for receiving items
TES V: Skyrim codes - Standard inventory management commands
Skyrim 5 codes - Codes for gold
The Elder Scrolls V codes - Armor sets (sets)
Daedric Armor Set
Player.AddItem 0001396B 1 | armor |
Player.AddItem 0001396A 1 | boots |
Player.AddItem 000D7A8C 1 | fire suppression boots +50% fire resistance |
Player.AddItem 000D7A8B 1 | boots of silence +Silent movement |
Player.AddItem 000D7A8A 1 | mammoth boots +50 units lifting capacity |
Player.AddItem 0001396D 1 | helmet |
Player.AddItem 0001396C 1 | gloves |
Player.AddItem 0001396E 1 | shield |
Player.AddItem 000D7AF9 1 | grounding board +70% resistance to electricity |
Player.AddItem 000D7AF6 1 | heat shield +70% cold resistance |
Player.AddItem 0010DFA3 1 | shield of denial +22% magic resistance |
Dragon Shell Armor Set
Dragonscale Armor Set
Unique armor with bonuses
Player.AddItem 0007C932 1 | "Archmage's Robe" (armor) +100% to magicka recovery speed; all spells cost 15% less magicka |
Player.AddItem 000F9904 1 | "Scholar's Diadem" (helmet) All spells cost less magicka |
Player.AddItem 000FC5BF 1 | "Tarch of Bloodthirst" (shield) A shield hit deals 3 damage. damage over 5 sec. |
Player.AddItem 000E41D8 1 | "Shield of Ysgramor" +20% magic resistance; +20 units health |
Player.AddItem 000295F3 1 | "Ingol's Helm" +30% cold resistance |
Player.AddItem 0002AC61 1 | "Skin of the Savior" (light armor) +50% poison resistance and +15% magic |
Player.AddItem 00052794 1 | "Ebony Chainmail" (heavy armor) +You move more quietly and enemies who get too close take 5 poison damage per second |
Player.AddItem 00045F96 1 | "Spell Breaker" (shield) +After blocking, absorbs up to 50 units. spell damage |
Masks (helmets) with bonuses
Player.AddItem 00061CB9 1 | "Krosis" +20% to hacking, archery and alchemy skills |
Player.AddItem 00061C8B 1 | "Morokey" +100% magicka recovery speed |
Player.AddItem 00061CA5 1 | "Nakrin" +spells from the school of destruction and restoration spend 20% less mana; +50 mana |
Player.AddItem 00061CC9 1 | "Vokun" +spells from the school of illusion, alteration and witchcraft cost 20% less mana |
Player.AddItem 00061CC2 1 | "Otar" +resistance to fire, electricity and cold increases |
Player.AddItem 00061CC0 1 | "Ragot" +70 stamina |
Player.AddItem 00061CAB 1 | "Volsung" +20% discount on all products; breathing underwater; +70 load capacity |
Player.AddItem 00061CC1 1 | "Hevnorak" +immunity to diseases and poisons |
Player.AddItem 00061CCA 1 | "Wooden mask" |
Player.AddItem 00061CD6 1 | "Konarik" +At low health, gives a chance to heal the wearer and damage nearby enemies |
Player.AddItem 000D2846 1 | "Mask of Clavicus Vile" (heavy helmet) +10 to eloquence. Magicka recovery speed +5%. Favorable prices +20% |
The Elder Scrolls 5 codes - Weapon sets
Maces, poleaxes, axes
Player.AddItem 000139B4 1 | Ax |
Player.AddItem 0001DDFB 1 | Inferno ax +30 units fire damage; sets the target on fire |
Player.AddItem 0001DFCB 1 | Thunderstorm ax +30 units electrical damage; takes away 15 units. of magic |
Player.AddItem 000139B8 1 | Mace |
Player.AddItem 000139B3 1 | Battle ax |
Player.AddItem 000139BA 1 | War Hammer |
Player.AddItem 0001C4E6 1 | "Axe of Sorrow" +Takes 20 units. the enemy's reserves of strength |
Player.AddItem 000233E3 1 | "Mace of Molag Bala" (mace) + Takes away 25 units. reserve of strength and magic. Fills a soul gem if an enemy dies within 3 seconds |
Player.AddItem 0002ACD2 1 | Volendrung (two-handed hammer) Takes 50 units. reserve of strength |
Player.AddItem 00035369 1 | "Staff of Magnus" +Absorbs 20 units. magic per second, if the enemy has no magic - absorbs health |
Player.AddItem 0010076D 1 | "Staff of Hevnorak" +Within 30 sec. deals 50 damage. damage per second from lightning. Apply to surface |
Player.AddItem 000AB704 1 | "Haldir's Staff" +Calms weak enemies for 60 sec. or captures their souls if they die |
Player.AddItem 000E5F43 1 | "The Staff of Yurik Goldurson" deals 25 damage. damage and takes away 50 units. of magic |
Player.AddItem 0006A093 1 | "Tandil's Staff" +Creatures and people up to level 12 do not fight for 60 seconds |
Player.AddItem 0002AC6F 1 | "Wabbajack" + Random effect every time you use it |
Player.AddItem 0001CB36 1 | "Rose of Sanguine" + Summons Dremora for 60 sec |
Player.AddItem 00035066 1 | "Skull of Corruption" +20 units damage Dreams collected from sleeping people increase damage to 50 units |
Unique weapons with bonuses
Player.AddItem 000F1AC1 1 | "Dragon Scourge" +40 units damage to dragons and +10 units. Electric damage against all |
Player.AddItem 000F5D2D 1 | "Pale Blade" +25 units cold damage; subtract 50 stamina from the target; weaker creatures and people take flight for 30 seconds |
Player.AddItem 000956B5 1 | "Wuthrad" +Especially deadly against elves |
Player.AddItem 000B3DFA 1 | "Chalk's Eye" +Fiery explosion deals 40 damage. damage in a radius of 4.5 m and sets targets on fire |
Player.AddItem 000A4DCE 1 | "Bloody Thorn" +Fills the soul stone if the enemy dies within 3 seconds |
Player.AddItem 00053379 1 | "Fierce" +15 units cold damage; takes away 15 units. the enemy's reserves of strength |
Player.AddItem 000F8317 1 | "Cooler" +30 units cold damage; Chance to paralyze target for 2 seconds |
Player.AddItem 00094A2B 1 | "Phantom Blade" +3 units extra damage, ignoring armor |
Player.AddItem 000AB703 1 | "Curse of the Red Eagle" +Sets undead level 13 and below on fire and causes them to flee for 30 sec |
Player.AddItem 0009FD50 1 | "Red Eagle's Fury" +5 units fire damage and sets the target on fire |
Player.AddItem 000B994E 1 | "Valdar's Lucky Dagger" +25% critical strike chance |
Cheats for the game Skyrim - Accessories
Skyrim cheats - Consumables: Ingredients, Soul Stones, Potions, Arrows
Soul stones
Cheats from the game Skyrim 5 — Treasure Chests
The game itself provides special cheat chests that contain all items of a certain type. For example, one chest contains all types of staves, and another chest contains all types of arrows.
Notes:
After opening cheat chests, the game may freeze a lot. In this case, you just need to wait no more than 1 minute.
If, after opening such a chest, you do not look at the objects, but immediately take all the contents (the “R” key), then the game can freeze.
Player.PlaceAtMe | Create a new chest right in front of the hero |
Player.PlaceAtMe 000C2CDF | Enchanted Weapon Pack |
Player.PlaceAtMe 000C2CD7 | A set of enchanted armor, jewelry, clothing for a mage and a robber |
Player.PlaceAtMe 000C2CE0 | Set of standard weapons |
Player.PlaceAtMe 000C2CD6 | Standard armor set |
Player.PlaceAtMe 000C2CDE | Set of staves |
Player.PlaceAtMe 000C2CD8 | A set of armor and jewelry, clothes for a mage and a robber |
Player.PlaceAtMe 0010D9FF | Skill Book Set |
Player.PlaceAtMe 000C2CD9 | Spell Book Set |
Player.PlaceAtMe 000C2D3B | Set of regular books |
Player.PlaceAtMe 000C2CD4 | Set of arrows |
Player.PlaceAtMe 000C2CDA | Set of ingredients |
Player.PlaceAtMe 000C2CDB | A set of keys |
Player.PlaceAtMe 000C2CE1 | Set of scrolls with spells |
Player.PlaceAtMe 000C2CE2 | Set of potions, elixirs and tinctures |
Skyrim cheat codes - Enchanting (improving) weapons and armor
Enchanting is a skill with which you can independently add magical properties to ordinary objects.
Rules for creating enchanted items:
- You can only improve the base item, without other enchantments;
- each item can have no more than 2 enchantments;
- the quality of enchantment depends on the Enchanting skill;
- level up your Enchantment skill to level 100 – Player.SetAV Enchanting 100.
- open all enchantment perks (a way to upgrade perks).
There is a cheat code for adding a ready-made enchanted item to your inventory. To do this, you need to know the code of the base item and the enchantment code:
After enchanting, the item will have a very small charge (170-350). To increase the charge of a weapon, you need to pick it up and enter the following code:
Skyrim cheat codes - Legendary weapons and armor
Legendary weapons and armor are standard items, but with significantly improved stats. These items are created by professional blacksmiths (skill level 91 to 100). The percentage of item improvement directly depends on the level of the Blacksmithing skill. The higher the skill, the better the characteristics of the created legendary item.
What is needed to upgrade weapons and armor to legendary quality:
- blacksmithing level 91+;
- Workbench;
- regular armor or weapons;
- ingredients for improvement (different for all things).
All these things in Skyrim can be obtained in the usual way, but it will take a lot of time. With the help of cheat codes this process can be significantly speeded up. Enter the following codes:
- Player.SetAV Smithing 100– pump up “Blacksmithing” to level 100;
- Player.PlaceAtMe 000D932F– create a workbench right in front of you;
- Player.AddItem [quantity]– add a blank item to your inventory (item codes can be found here).
- In the game, we approach the workbench, look at what ingredients are needed to improve the selected item;
- Player.AddItem [quantity]– add the necessary ingredients to your inventory (item codes can be found here);
- We approach the workbench and upgrade the item to legendary quality.
TES V: Skyrim codes - How to find out item ID
You can add absolutely any item to your inventory, the main thing is to know its game code. If you already have a unique item and you want to create several more copies of this item, you can determine the item code:
Method 1
- Enter the code in the console: Player.ShowInventory
Note. This method always works, but if you have too many items in your inventory, you may have difficulty finding the item you need. In this case, use the second method.
Method 2
- Place the item whose ID you need to find out in an empty box (barrel, chest, bag or something else).
- We come as close to the box as possible (it is advisable to sit down).
- Open the console, click on the box in which our item lies, enter the command INV.
- We look for the required item by name and look at the item ID.
Having found out the item code, we use it in the standard cheat for adding an item:
Codes for placing objects
Skyrim cheats and codes - Defining an object code
These commands only work when a specific object is selected in the console. To select an object in the console, you just need to click on it with the mouse. After selecting an object, a message with the object code (object ID) will appear in the console.
To scroll through text in the console, if there is a lot of it, use the “Page Up” and “Page Down” keys.
If you want to apply several commands to the same selected character or object, then you do not need to select it with the mouse each time; it is enough to select it only once (the selection is saved).
There are many invisible objects in the game (sound sources, light sources, quest zones), they can be mistakenly selected instead of the required item, so it is advisable to be as close to the object as possible to make it easier to hit it. Various game special effects (fog, snow, blizzard) also complicate the process of selecting an object.
Objects located outside of screen visibility can only be selected in the console by their game ID code. This is done using the PRID [item code] command.
Skyrim console commands - Placing objects
For the following commands to work, you must first select the object - open the console and click on the object. After this, the inscription (object ID) should appear in the middle of the console screen.
(All objects you create have an ID starting with FF000...)
Notes:
To apply several commands to the same object, you do not need to select it again each time; the selection is saved.
Sometimes, after using the Setpos and GetAngle commands, an object moves only visually, physically it remains in the same place (the texture moves, not the object itself). To fully move an object, you need to select it and enter two more commands: Disable And Enable. You can also enter the command Setscale 1 to update the physical model of an item.
To align an incorrectly placed object, enter:
SetAngle x 0, SetAngle y 0, SetAngle z [any number].
Object management
Cheats from Skyrim - Objects for the house
Many Skyrim players have their own home or favorite place where they spend a lot of time. But not every place has the necessary workplaces: alchemy tables, forges, workbenches.
These cheat codes allow you to install workstations anywhere:
Furniture for home
When created, all items appear in front of you in the direction you are looking. To set the item level, before introducing the cheat, center your gaze so that the character is looking straight ahead, and not down or up.
Player.PlaceAtMe 00089A85 1 | dummy |
Player.PlaceAtMe CC16A 1 Player.PlaceAtMe CC163 1 |
single door |
Player.PlaceAtMe CC164 1 | double door |
Player.PlaceAtMe B2456 1 | dragon head |
Player.PlaceAtMe 3FA65 1 | moose antlers |
Player.PlaceAtMe DD9E0 1 Player.PlaceAtMe DD9E1 1 Player.PlaceAtMe CF264 1 |
moose head |
Player.PlaceAtMe D9285 1 | crab |
Player.PlaceAtMe D9276 1 | goat head |
Player.PlaceAtMe 3858F 1 | fish |
Player.PlaceAtMe D928F 1 Player.PlaceAtMe D928D 1 |
big cat head |
Player.PlaceAtMe D9289 1 Player.PlaceAtMe D9288 1 |
wolf head |
Player.PlaceAtMe D9287 1 Player.PlaceAtMe D927D 1 |
beast head |
Player.PlaceAtMe D8282 1 Player.PlaceAtMe D9281 1 Player.PlaceAtMe D927F 1 |
bear head |
Player.PlaceAtMe 93D39 1 Player.PlaceAtMe 93D3B 1 Player.PlaceAtMe 93D3D 1 Player.PlaceAtMe 93D3F 1 Player.PlaceAtMe 93D41 1 Player.PlaceAtMe 93D43 1 Player.PlaceAtMe 93D45 1 Player.PlaceAtMe 93D47 1 Player.PlaceAtMe B7E3E 1 Player.PlaceAtMe B7E40 1 Player.PlaceAtMe BF9CF 1 Player.PlaceAtMe BF9D1 1 Player.PlaceAtMe BF9D3 1 Player.PlaceAtMe BF9D5 1 |
carpets (square) |
Player.PlaceAtMe 95498 1 Player.PlaceAtMe 954A3 1 Player.PlaceAtMe 954A4 1 Player.PlaceAtMe 954A5 1 |
carpets (round) |
Player.PlaceAtMe 5C015 1 Player.PlaceAtMe 5C016 1 Player.PlaceAtMe 5C017 1 |
animal skins |
Player.PlaceAtMe 7EA42 1 | wall burning candles |
Player.PlaceAtMe 1F24A 1 | table candle |
Player.PlaceAtMe 5AD5B 1 | ceiling lamp |
Player.PlaceAtMe 77761 1 | light source for illuminating dark rooms (invisible, cannot be selected/moved/deleted after installation) |
Player.PlaceAtMe FFF46 1 Player.PlaceAtMe FFF48 1 |
blue light source |
Codes for mannequin:
Fast travel codes
Help [part of title] 0 | To find out the exact names of the locations, enter the command. (The location name should not contain spaces, and if there are, enter only the first word). In the list that appears, using the “PageUp” and “PageDown” console scroll keys, we find the following lines: CELL: location_name (location id). Find out the full name or id of the location. |
COC [location_name] | Teleport to a specified location |
COC Qasmoke | Teleportation to test location. Here you will find all the game items and tools for making any items. |
Player.MoveTo [object code] | Teleport to the specified object (character) |
Player.GetPos x Player.GetPos y Player.GetPos z |
Find out your current location in coordinates. (You need to enter 3 commands one by one and write down the coordinates shown. After that, you can teleport to this point using the following code) |
Player.SetPos x [#] Player.SetPos y [#] Player.SetPos z [#] | Move your character to the specified coordinates. (Do not close the console until you use the command 3 times for each of the coordinates. Moving occurs only after closing the console). |
TMM [#] | Enable/disable markers on the world map - remove everything. - show all. — show everything, but without the ability to quickly move |
Codes for friendly characters (NPCs)
Skyrim codes - Stop a fight with an NPC
- We stand so that all the characters who attacked us are immediately visible on the screen.
- Turn on the console, select each NPC in turn, enter the codes for them:
- Player.SetCrimeGold 0– turn off the reward for our head;
- StopCombat– disable the character’s aggressive behavior.
- Only after we turn off the reward for our head from all enemies can we close the console. (If at least one NPC is not assigned a code, he will start attacking us again, and after him, all other NPCs will again become aggressive. The remaining hostile characters are clearly visible on the minimap, they are highlighted with red dots, you must apply the code to everyone) .
These commands do not work on our constant enemies (monsters and some story characters), who are always attacking us.
Skyrim cheat codes - NPC customization
Setting physical properties of NPCs:
GetPos [axis] | Returns position along the (x,y,z) axis |
SetPos [axis] [#] | Returns rotation along the (x,y,z) axis |
SetAngle [axis] [#] | Rotates an object along the (x,y,z) axis |
MoveTo Player | Move a non-player character to the player character. Using Player.PlaceAtMe will create a clone of the NPC |
Disable | “Turn off” an object. It will remain in the game, but will not display or function. For complete removal see markfordelete |
Enable | "Enable" object |
Kill | Kill the selected target |
Resurrect 1 | Revives the selected target |
ResetAI | Restore default dialogues - erase the memory of the selected NPC. This command should only be used if you killed someone, resurrected them, and after that they refuse to talk to you |
SetEssential [#] | Makes an NPC mortal (0) or immortal (1) |
MarkForDelete | Delete the selected object or character. Important: using this code you can delete not only some chest, but also invisible objects that can be selected by clicking on them and which are necessary for the normal functioning of the game. Be careful when using this command. Objects created by console commands are deleted immediately, and those initially present in the game are deleted after saving and loading the game. There is no reverse command. To remove objects from the game, it is recommended to use this command rather than disable, since the latter only hides the item and does not delete it, as a result of which saves become bloated with unused objects. |
Customize NPC personality, characteristics, skills:
SetRace | Changes the character's race. There are also the meanings of ElderRace and ElderRaceVampire - these races are something like the elders (for example, Esbern is an Elder, but he is also a Nord. Greybeards are also included here). Also, if you add Vampire at the end, then the object will become a vampire (example: OrcRaceVampire). Race names: ArgonianRace— Argonian, BretonRace— Breton, DarkElfRace- Dark Elf, ElderRace- Forest Elf, HighElfRace- High Elf ImperialRace— Imperial, KhajiitRace— Khajiit, NordRace— Nord, OrcRace— Orc, RedguardRace- Redguard. |
SetLevel ,,, | Sets the level of the non-player character. Enter SetLevel 1000,0,1,81 so that the character develops along with the player character from level 1 to 81. 1) [% ? 10] Percentage of level to the main character (1000 = 100.0%). 2) How much higher or lower than the level. 3) [entry level] The most initial level of a non-player character. 4) [level cap] The maximum level of a non-player character to which he can develop |
GetAV [characteristics] | Gets the current value of each variable |
ModAV [characteristics] [#] | Adds the specified amount to a value |
ForceAV [characteristics] [#] | Sets the value to # quantity |
SetAV [characteristics] [#] | Sets the specified quantity to the specified value. Unlike modav, it does not add to the value, but sets it |
HasPerk | Checks whether the character has this ability |
Customizing NPC equipment:
INV | Display the entire inventory of an object/NPC |
SBM | Displays the trading menu with a character or creature even if he is not a merchant |
OpenActorContainer 1 | open the selected creature's inventory. You can exchange items |
DuplicateAllitems Player | copy all items from the inventory of a specified NPC or object to your inventory |
AddItem [#] | Adds an item to an NPC's inventory. Note: It is useful to add gold to traders |
Equipment [#] | Equips a particular item to the selected character |
RemoveAllItems | Removes all items from an object |
ResetInventory | Dress the selected character in his original equipment |
Setting up movements, NPC relationships:
SetRelationshipRank [#] | Changes the relationship between two NPCs. [#] Possible values #: -4 - bitter opponents, -3 - enemies, -2 - enemies, -1 - rivals, 0 - acquaintances, 1 - friends, 2 - confidants, 3 - allies, 4 - lovers. All other values are set to 0 (familiar) Note: This code will also work on the player if you enter: player.SetRelationshipRank [#] |
TDetect | Disable NPC's vision. Theft without consequences. Doesn't work on pickpockets |
TCAI | Enable/disable aggressive actions on the part of characters and creatures. After casting, everyone stops fighting |
TAI | Enable/disable the intelligence of characters and creatures. All the way to movement |
Player.SetCrimeGold [#] | Sets a bounty on the head of a player character in a specific faction. |
Player.SetCrimeGold 0 | Cancel the bounty on your head |
StopCombat | Stop combat with the selected friendly character |
Skyrim V codes - NPC controls
With these cheats you can gain control over any monster or character. Do everything strictly in the specified sequence:
- Switch to third-person view (key “F”).
- We approach the desired character or monster whom we want to inhabit.
- Open the console, select the monster by clicking the mouse, enter the codes:
- Player.TC– Control the main character
- TC– Control a non-player character or creature
- Close the console.
Notes:
After gaining control of an NPC, you will only be able to move with it and will not be able to attack.
If you press attack, your main character will attack, and not the one you control. How to force NPCs to attack is unknown.
To return to normal play and gain control of your main character, enter in the console:
Cheats in the game Skyrim - NPC companions
In Skyrim, almost any character can be made your partner, so that he can follow us and help in battles. To do this we do the following:
- We approach the required character, open the console, click on the character. Let's start entering codes:
- SetRelationshipRank Player 3– transfer the character to a group of possible allies.
- AddFac 0005C84D 1– add the necessary dialogue.
- Close the console and continue the game. We talk to the character, select the dialogue that appears: “Follow me. I need your help".
SetRelationshipRank Player 3 | Transfer a character to a group of possible allies |
AddFac 0005C84D 1 | Add NPC dialogue to add him to your partners |
Set PlayerFollowerCount to 0 | Adds dialogue for taking on new partners. After entering this command, the old partners will continue to follow the player, but you can take another partner. As soon as you take someone else as your partner, the old partner stops following you. If no one is following you, no companions, then this command is useless. The maximum number of partners is 1. There is no point in entering something else instead of 0 - it will not give any effect. |
Set PlayerFollowerCount to [#] | Set the number of partners. By setting “0”, you can refuse all companions at once |
Codes for completing quests
Skyrim has a lot of side quests that can take months to complete. Quests are a chain of several tasks (quest stages). Using codes, you can quickly complete both individual stages of quests and entire quests.
View codes from Skyrim - Search for quest
How to move to the quest goal:
- Open the console and enter ShowQuestTargets— we get the quest ID code. (Quest IDs, after introducing ShowQuestTargets, are located in exactly the same sequence as in the “Quest Log”).
- In the resulting list, look for Current quest:, remember this ID. (To scroll the text in the console, press the “PageUp” and “PageDown” keys).
- Now we enter MoveToQt to teleport to the quest goal.
What are the codes in Skyrim? Passing the quest
StartQuest | Start quest |
CompleteQuest | Complete the quest (This command is not recommended, as you will not be able to get the next quest if it is a quest chain. Use only if you want to complete the quest without being able to go further). |
ResetQuest | Reset all stages of the quest, after which it can be completed again. (For this quest to be deleted from the Quest Log, you must save and load the game). |
CompleteAllObjectives | Mark all quest tasks as completed |
SetObjectiveCompleted [stage] [state] | Set all quest stage objectives to either completed (1) or failed (0) |
SetObjectiveDisplayed [stage] [state] | Set the state of the quest stage tasks (0 - disabled, 1 - enabled) |
SAQ | Start all quests in the game (may crash the game!) |
CAQS | Complete all quests in the game (may crash the game!) |
Complete the quest step using the code:
- We save the game and do not overwrite this save until we complete the quest.
- Open your list of tasks (key “J”). Select the quest we want to complete and press “Enter.”
- Open the console and enter ShowQuestTargets— we get the quest ID code.
- Enter GetStage. The stage of this quest will appear in the console as follows: GetStage >> [number].00. We remember the number of the current stage of the quest.
- Enter SQS— we get a list of all stages of the specified quest in the following form Stage [stage]: 1 (or 0). 1 means that the stage has been completed, 0 means the stage has not yet been completed. In the resulting list we look for our remembered stage of the quest. Remember the number of the next stage.
- Enter SetStage [stage]— set the stage of the quest. As a stage, enter the number of the next stage.
- Enter MoveToQt— teleportation to the target of the selected task.
We begin to go through the next stage of the quest on our own.
Complete the entire quest using the code:
If you complete a quest using the CompleteQuest command, it will simply be marked as completed and you will no longer be able to continue it. However, you will not receive any reward for completing the quest this way.
To receive all the rewards for the quest, you must complete all its component stages one by one. To do this, execute commands 6), 7) from the previous paragraph until all stages of the quest are completed. This is how you can complete any quest 100%.
Other codes
RPG Skyrim codes - Graphics and animation settings
TFC | Enable/disable free camera |
TM | Enable\disable interface |
TG | Enable/disable grass |
FOV [#] | Change first person camera view (default: 60-90) |
Set TimeScale to [#] | Set the speed of the game time (20 - default, 1 - real day, 0 - stop the time of day) |
Set KillMoveRandom to [#] | Set the probability of finishing animation (50 - default, 100 - maximum, 0 - off) |
Set DecapitationChance to [#] | Set the probability of decapitation (40 - default, 100 - maximum, 0 - off) |
S.W. | Changes the weather |
FW | Changes the weather to another random one |
Skyrim codes - Game settings
Solving problems with entering codes
Skyrim codes - Remove squares when entering cheat codes
It often happens that when entering codes into the Skyrim console, not letters and numbers are displayed on the screen, but empty squares. This happens because letters of the Russian alphabet are entered, but they are not supported in the game console. There are several methods to solve this problem.
Method 1. Switch the font in the game
Press the “Scroll Lock” key to switch the alphabet right in the game. (Doesn't always work!).
Method 2. Changing the font
- Go to the game folder and find the file: Skyrim\Data\Interface\fontconfig.txt.
- In the properties of this file, uncheck the “Read Only” checkbox.
- Open the file and replace the following line:
map "$ConsoleFont" = "Arial" Normal
on
map "$ConsoleFont" = "FuturaTCYLigCon" Normal
Method 3. Set the English language in the console
If for some reason you are unable to remove the squares in the console, then enter the cheat codes as they are. In this case, you will not see what you enter, but the codes will work. But before this, it is imperative to change the language in the console to English:
- Go to C:\Users\[username]\Documents\My Games\Skyrim
- Open the Skyrim.ini file.
- In the text of the Skyrim.ini file after the lines:
add (not replace) the following line:
sConsole=ENGLISH
Method 4 - Set the English language in the Steam client
During the game, press the key combination "Shift" + "Tab". Right-click on your nickname in Steam, click change language, select “EN”.
If none of the methods work, and you do not own the original version of the game, then you should think about finding another image with the game or purchasing the original version.
Method 5. Set English as the default language in the OS
If you cannot change the input language using sConsole=ENGLISH, then you need to set the default English language in the computer operating system.
Windows XP:
- "Start" menu, line "Run..."
- Enter the text: control international
- Go to the “Languages” tab, “More details...”
- Next, find “Default input language”, select “English (USA)”, “Ok”.
Windows 7:
- Go to “Start”, line “Control Panel”
- In the panel, select “Language and Regional Standards”, “Languages and Keyboards” tab
- Select "Change keyboard..."
- Find “Default input language” and select “English (USA)”, “Ok”.
Windows 8:
- In the lower right corner of the desktop screen, click on the inscription “RUS”.
- In the “Language Settings” menu, select “English. Keyboard layout: US."
- Move the selected line to the very top - press the “Up” button.
After this, the codes in Skyrim should be displayed normally.
Among the variety of resources in The Elder Scrolls 5: Skyrim you will find a wide variety of plants. Your hero will need them when crafting potions and food, so be careful when collecting resources of this type. Let's figure out where to find the poison bell in Skyrim and what it is needed for.
Item Description
The poisonous bell was described in a plant guide, which was created specifically for this computer game. It says that the location of the plant has several versions. The first is that the bluebell grows where people die bad deaths. Another version says that the plant first appears and then lures poor people to their deaths. There is no evidence for either theory. The plant is used to refine poisons and create potions to enhance alchemical skills.
Where to find?
The poison bell in Skyrim can be found in several locations. The largest concentrations of the plant are located in the swamps near Hjaalmarch. You can look for corresponding bushes around Fort Snowhawk, Movart's Lair, Ustengrev, Miko's Hut.
The second place is where you can get there through one of the main quests. Also pay attention to the catacombs of Forelhost.
You can also get a poison bell in Skyrim using the cheat. The code must be entered in the console, which opens with the "~" key. Then enter the command player.additem 000516C8 X, where X is the number of plant units.
What is it needed for?
This ingredient is used by players both for consumption raw and for processing in the alchemical laboratory. If you eat the bell raw, you will become vulnerable to poison, slowed down, and suffer health damage, so it is not recommended to eat it that way. And in the case of alchemy, you can enhance the effects of potions.
You will also need a poison bell for two quests. First, the alchemist Ingun Black-Briar will ask you to bring 20 pieces of the plant. Secondly, in the quest “The Only Cure” you will need a potion from the bell for the Daedric Prince Peryite.
The world of Skyrim is huge, complex and treacherous! Codes for the game will help the player in a difficult situation. The article discusses the main codes in detail.
Bethesda Softworks has pleased its fans with another masterpiece - the game The Elder Scrolls 5: Skyrim. A living and dynamically changing world with its own laws completely absorbs attention. The plot is captivating from the first minutes, you will abandon all other games and plunge headlong into the world of dragons, terrible monsters, sorcerers, magicians, fairies, heroes, insidious villains and magic.
It is always difficult to complete a new game, so as not to waste time and nerves and enjoy the plot, you can use special codes to complete it.
World of Skyrim
What are the codes for the game Skyrim for? You are a hero, you are destined to snatch the country from the clutches of huge dragons that terrorize the population. The player will have to uncover political conspiracies, win the love of the local population and earn the love of a local beauty. To do this, you have a huge amount of weapons, armor, secret magical knowledge and items at your disposal.
At the beginning of his journey, the main character is weak and helpless, he has a small arsenal of weapons, and his magical skills are almost zero. He has nothing to oppose to a strong and insidious opponent. Gradually, by completing quests and spending a huge amount of time, the player gains experience, masters the necessary knowledge and powerful weapons. How many lives will it take for the main character? And I really want to see what’s beyond the horizon, find countless treasures in caves, and defeat an insidious enemy. To do this, you can use codes for the game Skyrim.
Do you need armor, weapons, potions, books, lost quest items? Codes for the game Skyrim will allow the player to get absolutely everything! To use them, you need to open a console window. It opens when you press the "~" key. Next, enter ˽ ˽ (enter without parentheses), press the "ENTER" key. Done - the desired item is in your inventory.
Potions in Skyrim
The purpose of potions is different - to poison a weapon, heal a partner, give the hero invisibility, restore strength, and much more. To create potions you need:
laboratory;
knowledge of recipes;
Ingredients.
In the heat of battle, all this is inaccessible, because codes for potions in Skyrim will come to the rescue at the most opportune moment.
In Skyrim, the code for an invisibility potion is entered like this: player.additem 0003eb40 1. As a result, the player will receive 1 bottle of invisibility potion in the inventory for 30 seconds. But in order to “pump up” the skill, the alchemist will have to create some potions. Here, ingredient codes will come to the rescue.
For example, vampire ashes are a rare and valuable ingredient used in many recipes. It costs 250 gold and is required to complete the quest “Expulsion from the Mages Guild.” The code for vampire ashes in Skyrim will look like this player.additem 0003AD76 2. As a result, you will get 2 vampire ashes.
Spell codes
Why do you need Skyrim 5 codes for all spells? Magic is the main ability in the game. The bow and sword may not always be effective weapons. Sometimes it’s easier to strike the enemy with lightning, and some quests require stealth, but only magic will help you become invisible. If you want to know everything at once, the code for all the spells in Skyrim will help. To do this, you need to enter the command - psb in the console, after which the player will receive all the spells and cries of dragons , as well as talents.
Books in the game are needed to learn spells and level up the hero. They are difficult to find, and they appear as the hero’s level increases. They are expensive to buy from merchants, so you can use codes for spell books in Skyrim. To do this, you need to enter, for example, player.additem000a2729 1 - and you will get the Tome of Spells: “Scaring Elder Undead”
Let's look separately at how to enter codes from addons
TheElderScrollsV: Dragonborn is an add-on that adds the island of Solstheim, where Netchi live. They look like huge jellyfish with tentacles and float in the air. When attacking, they inflict 25-70 damage. damage From one to two skins can be removed from one corpse. Netch's skin is needed to create bone and chitin armor.
The code for the Netch skin in Skyrim –XX01CD7C, XX– means that the object belongs to the addon. XX can be 02, 03, 04, depending on what the addon is worth. It’s easy to determine - you need to click on the item that belongs to the add-on and look at the first two numbers, for example “02”, then all Skyrim 5 codes for Solstheim ingredients will start with “02”.
Many modern gamers want to experience all the gaming features without stress. This also applies to fans of The Elder Scrolls line. For example, in the fifth part of this game the character encounters various objects. When installing add-ons, the list of things only increases. They can develop a variety of skills and professions. Materials and resources will be useful for this. For example, alchemy is in great demand. With its help, Dovahkiin will brew useful potions that will help in travel. Today we will talk about codes in Skyrim for ingredients. How to use them? Is it possible to do this?
Description of ingredients
First, a few words about what the ingredients are in Skyrim. They are found throughout the world of The Elder Scrolls V. The main purpose of their use is to obtain beneficial effects. Dovahkiin can brew potions with new or already known parameters.
Each ingredient in Skyrim has four properties. You can learn about them with a well-leveled Alchemy skill after eating them or mixing them with other ingredients. Therefore, future alchemists are recommended to upgrade their skills. Then the character will be able to learn the topics faster.
Important: Some ingredients can be used in blacksmithing or cooking.
Extraction methods
Some players prefer to play fairly. They will not need Skyrim codes for ingredients. But it is useful to know where to find alchemical and culinary substances.
In The Elder Scrolls V, characters can find various kinds of ingredients anywhere in the game - on the streets, in houses, in caves, dungeons, and so on. The easiest way to find elements of plant origin.
Some ingredients for alchemists and cooks fall from the bodies of animals. To do this, Dovahkiin will have to fight them.
You can easily do without codes in Skyrim for ingredients. The bulk of alchemical items are scattered around the world and hidden in alchemists' shops. Some ingredients for potions and food can be purchased from various types of merchants.
How to use cheats
In some cases, cheat codes for ingredients in Skyrim greatly simplify the game and completing tasks. The player will have to perform certain actions to complete the task. No add-ons or utilities are required.
The player must complete the following steps to activate codes in Skyrim for ingredients:
- Switch keyboard layout to English. For Skyrim, you need to make changes to the language settings of the operating system.
- Launch the game and load a save.
- Open the game console. To do this, click on the "~" key.
- Specify the code for issuing items in the game - player.additem.
- Separated by a space, indicate the item ID, and then, separated by a space, the number of items issued.
- Confirm the request by pressing "Enter" on the keyboard.
After this, certain items will appear in the inventory in the specified quantities. It is advisable not to overdo it - the character's bag will quickly overflow.
Identifiers in the game
Even a novice gamer can use Skyrim codes for alchemical ingredients.
In the screenshot below, the player will see the IDs of items from the Dawnguard add-on.
That's not all. Skyrim is full of different materials for alchemical recipes and various potions. After installing the Hearthlife and Dragonborn add-ons, you can use the following things:
- salmon caviar - XX003545;
- Hawk Egg - XX00F1CC.
But that's not all. What if there are no add-ons in the game? The player can then use standard alchemical ingredients.
Here is a list of the main items in the game for alchemy.
But the alchemical items don’t end there either. There are a lot of them. And you can mix them in different ways. Below is a screen with several basic ingredients for alchemists and a table with ID.
It is problematic to list a complete list of alchemical items. There are a lot of them. We have already studied the bulk of them. All that remains is to explore Skyrim and look for new ingredients for potions.