14. 07.2017

Blog of Dmitry Vassiyarov.

How to start windows in safe mode - instructions

Hello dear readers.

Now we will look together at the topic of how to run Windows in safe mode of different editions.

When and why can this be useful?

If your computer has been attacked by viruses, it takes a long time to turn on, does not work correctly after installing new programs and drivers, or you have other problems, you should boot into safe mode and try to fix them. For example, remove the program that caused the troubles, search for and eliminate virus software, etc.

Starting safe mode for
Windows 95, 98, 2000, XP, Vista and 7

What do you need to do to get a screen with all the above options?

• Start restarting your computer;
• When it beeps, but the Windows icon has not yet appeared, press the F8 key. Did not have time? Wait until the download is complete as usual and repeat this step again.
• A black screen with white text will appear in front of you. If you do not need to fine-tune the system, choose the very first option - Safe Mode.

• Next, you will receive a notification that you are working in this mode and what it means. Click “Yes” to continue.

If, after pressing the F8 key, the “Boot Device” window appears instead of the Safe Boot screen, specify the hard drive, press Enter and then follow the instructions described above, starting from the second step.

Basic mode and other options

Alternative names: diagnostic or fault protection mode, which reflects its purpose. When you select it, only the most necessary operating system components are launched: input/output devices, video adapter, etc. This applies to the basic option, which is most often used. But when you get ready to turn it on, other, more advanced modes will appear in front of you.

I propose to look at what they are so that you can make the right choice in your case:

• With loading of network drivers. Give it preference if you need to go online after starting your computer.
• With command line support. This option is used mainly by IT professionals. If you are not one, it is better to boot the system in the first safe mode.

Also, when you start the basic version, you will see a few more options a little lower on the screen:

• Enable boot logging. A file ntbtlog.tx will be created with a list of all drivers, up to the last one, after which problems with the computer began.
• Enable VGA mode. Low display resolution (640x480) is used. This option is required when the resolution is being adjusted again.
• Loading the last known known configuration. Without explanation it is clear what this means.
• Directory service recovery. Applies to domain controllers.
• Debug mode. The Windows debug kernel is enabled.
• Disable automatic reboot. This will prevent the system from rebooting on its own after a failure.
• Disable mandatory driver signature verification. You give permission to launch firewood with an incorrect signature, which is often malicious.

Enabling Safe Mode on Windows 8, 8.1 and 10

In new versions of the OS, the algorithm of actions looks like this:

• Click on the computer shutdown icon;
• You will have two options: Shutdown and Reboot. You need a second one. But before selecting it, hold down the Shift key.

• When you restart this way, a menu will open with several options. Follow this path: Diagnostics - Advanced options - Boot options.
• Click the "Reboot" button. When this action starts, another menu will appear.
• Click the F4 key to select Safe Power On.
• Will you need internet? Then press F5 instead of F4.

Other options for 10

You can use this method:

• Click the Start button and select All Settings.
• Go to the “Update and Security” tab, then Recovery and “Special boot options”.
• Click on the “Reboot Now” button on the right.

If you are unable to fully turn on your computer, but the password login screen starts, click on the power button icon and, while holding the Shift key, select “Restart”.

Method for all versions of Windows

Microsoft developers have introduced a special utility into all generations of their operating systems that allows you to change various settings in safe mode. In early versions of operating systems it is called this way:

• Go to the Start menu and run the Run command (Win+R);
• In the line that appears, write msconfig and click “OK”;

A new window will open in which you need to go to the BOOT.INI tab on the top panel;

• In the bottom box, check the "Safe Mode (or SAFEBOOT)" box
• Next to it, by default, the item “MINIMAL” is checked, but if you need the Internet, change it to “NETWORK”.

Return to normal mode

To turn on the computer in normal mode after troubleshooting, go back to this application and select the “Normal startup” option in the first main tab.

By the way, in the same way you can return the computer to normal mode if it starts only in safe mode. But first, it is recommended to fix the problem that is causing this to happen.

This may be indicated by yellow icons with exclamation points next to the name of a particular device in Device Manager. This means that drivers for it do not work correctly or are missing. Or if you know what exactly could have caused the problem, go to the “Add or Remove Programs” section in the Control Panel and get rid of malicious programs.

That's all.

All the best friends, come again!

Hello, today we will talk about " safe mode"Windows and how to start it. First, let's figure out why and why we need safe mode in Windows.

Safe Mode may be needed to troubleshoot Windows problems, virus removal, to reset Windows password, For Windows system recovery, fixing blue screen errors, etc.

How to start safe mode on a computer or laptop? There are several ways to do this, which are very different from each other - it depends on the problem that needs to be fixed through safe mode.

if you you need to reset your password or restore your system, then you need to launch safe mode exactly when you turn on the laptop, since you cannot fully launch Windows in order to launch safe mode from it.

To do this, after pressing the power button on your PC or laptop, immediately press repeatedly F8 key until the safe mode launch menu appears.

If you need the Internet to solve your problem, then you should select " Safe mode with loading network drivers", then you can connect to the Internet in safe mode.

Unfortunately, this method does not work on Windows 10; to launch safe mode on this version, see the instructions below!

Turn on the computer, wait for the desktop to load, open the command line using the "Win" + "R" keys(The "Win" button is between "Ctrl" and "Alt"). Next, in the window that appears, enter the command " msconfig" and press the button " OK".

Next, in the new window, go to the "" tab, select the required Windows if there are several of them installed and check the box below " Safe mode", in the subparagraphs select " Minimum" (standard) or " Net" (for the ability to connect to the Internet). Click " OK" And reboot your computer or laptop.

Now your computer will always boot in safe mode with the specified parameters, so after eliminating the errors, do not forget to return to the Windows startup settings and uncheck safe mode for full use of Windows!

This method of booting Windows in safe mode is suitable for the following versions Windows: xp, 7, 8, 10.

If your computer cannot load the desktop for some reason, then only the first method listed above will suit you!

If your Windows 10 can boot to the desktop, then you can use the method described above. But sometimes it happens that Windows 10 does not want to boot and safe mode is via the key F8 impossible to run for version 10. There is only one way out - this.

Before turning on the computer, insert a bootable USB flash drive with Windows 10, and configure it so that it does not work from the hard drive.

When Windows 10 boots from the flash drive, press " Shift" + "F10"a command line should open in which we enter" bcdedit /set (default) safeboot minimal" and press "Enter". Next, restart the computer, Windows 10 should boot into safe mode!

To prevent Windows 10 from constantly starting in safe mode, start Windows again from the USB flash drive and enter the following in the command line " bcdedit /deletevalue (default) safeboot", restart your computer!

Video. How to open safe mode in Windows xp, 7, 8, 10?

That's all, now you know how to easily and quickly start your PC in safe mode when you turn on the computer or from Windows itself! Good luck and success!

If you experience a significant computer problem, you may need to log in through Safe Mode. If launched correctly, this function will make it possible to boot the PC with a set of basic drivers - mouse, monitor, keyboard, video adapter, disks. Also included are standard services that help the system software function. Using this method, as a rule, it is possible to eliminate most failures associated with computer work. Find out how to carry out this procedure correctly.

What is Windows Safe Mode

Safe Mode is diagnostic in nature and helps identify problems with device drivers. If problems occur when starting your PC normally, you should try turning it on with a basic set of services. If the device operates normally with these parameters, the essence of the failure should be sought in the recently appeared additional elements. This Windows download allows you to remove software that interferes with the adequate functioning of your laptop or desktop PC.

If the computer immediately turns on in safe mode, then there is a problem that is preventing the operating system from starting. Typically, this is affected by the programs you have installed recently. To fix the problem, you can use the “System Restore” function, which you will find in the “Start” tab, “Control Panel”.

How to boot Windows 7 in safe mode: instructions

There are two methods for launching in safe mode; they differ fundamentally from one another. In the first option, the procedure occurs at boot, and the installed Windows Seven does not start, so you can easily make changes to the operation of the devices. In the second case, the inclusion of a basic set of services occurs from the OS environment, which imposes some restrictions and will not make it possible to fully carry out repair procedures. However, both of these methods can solve some problems that arise during operation. Read more about them further.

Entering Windows 7 safe mode when starting the OS

If you encounter problems with the functioning of your PC, you need to know how to enter Windows 7 safe mode. If the device is turned on, click the “Restart” button in the “Start” tab. You need to switch to the special mode when the computer is turned off. Before the icon appears indicating that Windows is starting, you must click the F8 key several times. Try not to miss the moment, otherwise the OS will start and you will have to reboot the device again. A window with the following connection parameters should appear on the screen:

• Safe mode. With it, you can launch using a set of standard driver programs. Only those services that are needed to start and operate the computer are enabled.
• With loading of network drivers. You will need to select this method if you want to use the Internet or connect via a local network.
• With command line support. The normal desktop interface will not launch. Selecting this option causes a command prompt to appear instead.

In addition to the tabs described above, you will see other options. For example, turning on boot logging creates a special file that records all the drivers that are in Autorun. This helps to detect a broken program. Launching VGA will help you set your monitor's ideal resolution. Selecting the Last Known Good Configuration will allow you to restore Windows with the settings that were in place when booting properly. The remaining options (directory service restore, defer) are intended for IT specialists.

Use the arrow keys to select the tab that best suits the task at hand. Once the selection is made, press the Enter button on your keyboard. Then you can log into Windows and figure out the causes of the problems. Using this method, you will be able to restore the system by rolling back to the moment when the device worked normally, remove virus programs, broken drivers and much more.

Possible problems when turning on:

• A window opens indicating that Windows is turning on. This can happen if you press F8 too slowly or not enough times. Repeat the procedure by restarting your computer.
• Buttons F1 to F12 are disabled. If this happens, you need to know which key turns them on. Hold down the Fn button, and then press F8, and the device will boot.

How to get into safe mode from the OS environment

In some cases, system logon may be accomplished using a minimal number of services from the operating system environment. This method can help in solving many problems, although it is less popular. If Windows malfunctions are too serious, enabling it from the OS may not bring the desired results. How to get into the mode you need (safe) using the operating system:

• Find the Win key on your keyboard (it may have a Windows icon that appears when you turn it on). Hold it together with the R button.
• The command line will appear. Enter the following letters there without the quotes "k". Press the "OK" key.
• This way you can open the settings window. Among the tabs, open the section called "downloads".
• Select your operating system. As a rule, most computers have one OS - in your case, Windows 7, loaded by default.

• Below you will see a section called “Boot Options”. Select “Safe Mode”, check the box next to the “Minimal” value.
• Click "Apply", then "OK".
• Next, a small window will appear where you will see two tabs “Reboot” and “Exit without reboot”. If you want to restart your computer now, select the first option. In the second case, the next time you turn on the PC, the device will launch a basic set of programs.

What to do if safe mode does not start on your laptop

On some laptop models, a problem occurs that prevents the device from turning on with a minimum set of services. Then, after several presses of F8, the window in which you can select such a function does not appear, and the operating system begins to start. This may be due to the default key combination, which involves simultaneously pressing the Fn + F8 button. If this option does not work, the problem may be due to a broken keyboard.

When the operating system boots normally, you can enable the minimum set of services necessary for operation using the command line:

1. To do this, press “Win ​​+ R”, enter the combination of letters “msconfig” without quotes. Click OK.
2. Next, you can go to the tab where you need to select “Download” and mark the desired OS.
3. In the Boot Options section below, find Safe Mode and select Minimal. Finally, click “Apply”, “Ok”.
4. Select “Reboot” or “Exit without reboot” if you need to start with a minimal set of programs later.

Video: how to enable safe mode on windows 7

If you have never entered safe mode using the operating system, then the first time you may not understand how to do this according to the instructions. Watch the step-by-step video below from an experienced PC user to help you solve this issue and resolve your issue. The presenter of the video tells you in a few minutes how to enable the basic software set without effort. The method is simple, even those people who have never encountered such a problem can cope with it. Watch the step-by-step video instructions:

Many of the things we associated Windows with slowly disappear over the years as technology advances and we form new habits to accommodate. For example, I remember the days when you just had to press F8 repeatedly to boot into Safe Mode.

It was such a little secret - something like a life hack that you could teach a friend at the right time over the phone. Those days are long gone, however, even if entering Safe Mode has become more confusing, it is also a hallmark of progress in the Windows boot sequence.

Windows 10 Safe Mode

In Safe Mode, Windows automatically excludes some programs and drivers that are not necessary for Windows to load and function properly. And he takes only what is necessary in minimal quantities. This way, the download process will be fast and safe.

In Windows 10, booting your computer into Safe Mode is slightly different than in previous versions of Windows. Starting with versions 8 and 8.1, Microsoft changed the way everyone used to get into safe mode.

If previously we simply used the F8 keys or the Shift + F8 combination to enter Safe Mode, then in Windows 10 these old methods rarely work. But this does not mean that you do not have another way to enter Safe Mode in Windows 10. In this post, I will show you 4 ways to boot your Windows 10 computer into Safe Mode. Let's take a look.

#1 F8 or F8 + Shift

In this case, the oldest method is not the best. Pressing F8 or F8 + Shift repeatedly during boot can bring back memories of your first Windows 95 or XP. But the truth is that these key combinations will rarely work in Windows 10.

Since Windows 8, Microsoft has been able to significantly reduce boot times and therefore a large percentage of modern computers are too fast to register these keystrokes. Even if the method is still technically supported by the operating system, the system simply cannot react fast enough.

Of course, you should try this easiest method first. If everything went well, you will be directed to the Advanced Boot Options Menu, where you can select and launch Safe Mode.

Note: You must press the key quickly enough until the boot logo appears. The boot logo will look like a picture, which may be different for each user, depending on the equipment manufacturer.

#2 Special download options

The Custom Boot Options menu was introduced in Windows 8.1 and it provides a wide range of options for users who have problems with their computer. It also gave access to additional boot options, which is what we needed. Below are several ways to access the menu with special boot options:

• One of the easiest ways to boot into a menu with special boot options is a combination of Shift and the reboot button. To do this, press the button Shift and press reset button. This can be done in Start Menu, V login menu And other places, where there is a reboot button.
• Another way is to connect recovery disk. Immediately after connecting the drive, start the system. You will be asked to select a keyboard layout, after which you will be taken to a menu with specific boot options. Creating a recovery disk is very easy. Simply type "recovery drive" into the search field, plug in the flash drive, and follow the onscreen instructions.
• Finally, you can boot into a menu with special boot options, via Settings > Update & Security > Recovery. There, click the "Restart now" button under the Special boot options chapter and your computer will restart.

All three of these methods will take you to the same menu. There select Diagnostics > Advanced Options > Boot Options. Then click the reboot button, after which various download options will appear on the screen. Press F4, F5 or F6 to load one of the available Safe Mode options.

#3 System configuration

The System Configuration menu provides the fastest method, at least when you're already in Windows. Open the search field, enter msconfig.exe and press Enter. Then, in the tab, check the “Safe Mode” box. If you want to enter Safe Mode with advanced options, select the option Another shell, not minimal. Click OK and you will be prompted to reboot the system immediately.

If you need to do something before rebooting, then simply select the “Exit without rebooting” option and you can restart your PC after.

#4 Startup abort

The last method is a little harsh, but necessary in some cases. For example, if you cannot boot into the desktop, then of all the options that I described above, only one is guaranteed to work on Windows 10 - the recovery disk. Pressing F8 or F8 + Shift simply won't work on most modern computers, and unless you have a recovery disk, there seems to be no way to get into Safe Mode.

If this is your situation, then I want to reassure you that you can still get into safe mode. Do you remember when your computer repeatedly crashed and then displayed a message notifying you that Windows did not shut down properly or startup was aborted (like the screenshot below)?

You can do the same with your computer. Simply start your computer and abort the startup before or when the Windows logo appears. Do this three times and then allow your PC to start normally. Instead of booting to the desktop, your PC will ask you how to start the system, and Safe Mode will be among the available options.

Perhaps every user has at least once encountered quite serious malfunctions in the operating system. We are talking about those cases when even simply turning on the computer became a big problem, or when viruses caused great damage that even after starting the computer, it was simply impossible to use it. It is in such situations that you should use the so-called safe mode. In this article, we will figure out how to start a computer in safe mode and what it is, in general. Let's get started. Go!

When you enable safe mode, the PC loads exclusively the services required for the operation of the operating system, which minimizes the likelihood of various failures and errors during startup.

If you have a computer running Windows 7, you can enable safe mode as follows:

• First, restart your PC.
• Then, during the boot process, press the F8 key on your keyboard. Please note that in certain BIOS versions, after pressing F8, a boot disk selection window may appear. If this is your case, specify the system drive and, as soon as the boot continues, immediately press F8.

• After this, the system menu should open with a list of different ways to boot Windows. If you are not going to use the command line, select “SafeMode”. You can also boot with network drivers (Safe Modewith Networking) or with command line support (SadeModewithCommandPrompt). When you go to SafeMode, you will see a list of all downloaded files on the screen.

If any error appears during this, you will be able to see which file is the problem. Now let's look at how to enable SafeMode on your computer. Everything is a little simpler here. Use the Win+R key combination to open the Run window and enter msconfig. In the “System Configuration” window that opens, go to the “Boot” tab. In the “Boot Options” section, check the “Safe Mode” checkbox. Then click "OK" and restart your PC. After restarting, the system will start in SafeMode.

There is another way. Open the Start menu and go to Settings. Select Update & Security. Next, go to the “Recovery” tab. Scroll down to the "Special Boot Options" section and click on the "Restart Now" button. A menu will appear in front of you where you can select the desired mode.

There you can also launch other modes that may be useful if problems arise with the system. For example, disabling mandatory driver signature verification, disabling early antivirus startup, or disabling automatic restart after a failure. Selection is made using function keys or numbers.

You can also activate SafeMode using a bootable USB flash drive or recovery disk. First, boot from your existing drive, and then use the Shift+F10 key combination to open the command line. Run the command: bcdedit /set (default) safebootminimal, or enter “network” instead of “minimal” if you need network driver support. There is another way to open the Command Prompt. While in the window with the “Install” button, click on the “System Restore” item, which is located in the lower left corner.

Exiting their safe mode occurs in the same way as entering it. Just select “Windows boot normally” if you did this through the BIOS, or simply uncheck the box if you enabled SafeMode through the system configuration window. Now you know how to start your computer in safe mode.

As you can see, this is not at all as difficult as it might seem at first glance. Write in the comments whether this article helped you and ask any questions you have about the topic discussed.