How to enter the BIOS of a Samsung laptop?

Master's answer:

Even for the same laptop manufacturer, the BIOS entry commands are completely different. This happens because they have different models of motherboards installed.

When you turn on your laptop, press Pause to view the text on the screen. It is worth paying attention to the inscription Press F2 to enter setur. Of course, instead of F2 there can be almost any key or even a combination of keys. The most widely used ones are F1, F2, F8,Esc, F10, F11, F12, etc. You can also use the selection method. To exit pause mode, press Enter.

Find out all the information you can about your motherboard model online. And you can find out the markings by opening the computer properties by right-clicking on the “Start” menu item. Open the “Hardware” tab in the window that opens. Then open the device manager and find your motherboard in the list of configurations. Write down its name and make a request for it in the browser, and do not forget to add to enter setur/Bios in the search bar.

Some older models have information about the system board of this computer on a sticker on which the laptop model is written; also check the back of the computer for such information. Also check the battery compartment by first removing the battery.

To navigate through menu items in the BIOS program, use the arrow keys. To change any parameter value, the minus and plus buttons are usually used, but this depends on the motherboard model.

When making any changes to the BIOS settings, be very careful, because this program is responsible for the entire operation of the laptop. If, after the changes were made, problems began with the operation of the laptop, then you can restore the initial value using the command written at the bottom of the BIOS system window.

Another useful tip for you: do not change the BIOS settings if you have no idea what the consequences will be.

Good time!

Today I’ll tell you how to boot from a flash drive or drive on a Samsung N100 netbook.

To do this, insert the flash drive, turn on the netbook and press the F2 key.

Thus, we find ourselves in the BIOS. Here we see brief information about the netbook.

Now select the line – Fast BIOS Mode, press Enter and in the small window highlight the word – Disabled and press Enter.

After that, go to the Exit tab. Here we need to save the changes and exit.

Therefore, select the line – Save Changes and Reset and press the Enter key twice.

Now press the F2 key again (go to BIOS).

Select the Boot tab. Here we go to – Boot Device Priority.

Here we see that the first is the hard drive, the second is the flash drive.

To boot from a flash drive, you need to put it in first place. Simply, press the F6 key and the flash drive rises up.

To exit here, you need to press Esc.

Now, again, go to the Exit tab, save and exit.

check.

We turn on the netbook, and if you see the MultiBoot USB picture, then everything is done correctly. The download starts from the flash drive.

All operations performed in the BIOS system are quite serious, so if you have insufficient experience in this system, it is better not to experiment, as this can have very dire consequences. You should contact Samsung laptop specialists. However, if you are determined to achieve a specific goal, we will tell you how to enter the basic input/output system (this is what BIOS is literally called) on a Samsung laptop.

Why enter the BIOS menu?

As you know, BIOS is the basic system of any computer equipment. Logging into this system is due to the need to configure the components of the system unit, as well as download or reinstall the OS and other settings of vital parameters in the operation of the computer.

How to enter BIOS on a Samsung laptop? Different laptop models have different BIOS entries

Attention: the line of Samsung laptops is represented by a very large assortment of models, each of which may have different commands to enter the BIOS. This is because they have different motherboard models.

So, if you are the owner of a Samsung laptop, when you turn on your gadget, press the Pause key. After this, some text will appear on the device monitor; we need to focus on the inscription “Press F2 to enter setup”.

It is worth paying attention to the fact that in place of F2 you may have another key or a combination of them, the most common of which are F1, F2, F8, Esc, F10, F11, F12. It is possible to combine these keys with Fn. Note that here you can experiment by selection.

Exiting pause mode is done by pressing the Enter button.

What do you need to know to log in correctly?

Next, you will need to find information about the motherboard of your laptop using the Internet. This is not at all difficult to do: to have information about the motherboard markings, go to the Start menu and right-click on Properties.

A window will appear in front of you in which you will need to select the “Equipment” item. After this action, open the device manager, and among other configuration lists, find the motherboard of your device.

When you find all the necessary information, you can safely open the BIOS system on your laptop.

To move from one section to another, you can use the arrows.

This is how you will enter the Bios on your laptop, however, when making any settings, you should be extremely careful, because it is this system that is responsible for the activity and functionality of everything contained in the device.

Many new laptop owners often wonder how to enter the BIOS on a laptop computer. In this case, the procedure differs significantly from that used for conventional system units. There, for this purpose, when you boot the computer, you just need to press the Del key.

On laptops, various options can be used.

They will depend not only on the manufacturer, but also on the specific model. Therefore, if you need to adjust the BIOS settings, you will have to work hard. The situation is further complicated by the fact that entire key combinations can be used to enter BIOS mode. The most complex combinations of buttons are used in laptop computers manufactured by Samsung.

You can't always find an extended keyboard on them. The set of function keys in such laptops ends with the F10 button, and to enter the BIOS you need to press F12. In this case, you can use the Fn key, which is designed to change the keyboard layout. Advanced users should be aware of this, but for beginners this issue may cause certain problems.

There is one more subtlety that should be taken into account when working with the BIOS. Before making any changes to the basic settings, it is best to write them down on paper first. If you set incorrect parameters, your computer may stop booting altogether, for example, if the list of devices to boot is empty. Using your records, you can easily return the system to its original state and restore the functionality of the device.

What is BIOS?

Before entering the BIOS system on a laptop, you need to understand why it is needed at all. Literally, the abbreviation BIOS can be translated as “basic input/output system.” If we talk about the physical implementation, the BIOS is a chip with volatile memory installed on the computer motherboard.

To keep this chip running, a battery is required. This chip stores information that is necessary to test and boot the computer. If the laptop is working normally, then there is no point in changing the BIOS settings. However, if a malfunction occurs or the operating system is reinstalled, you simply cannot do without the BIOS. The main section of the BIOS is the Boot Sources or Boot Priority menu. This menu sets the priority of devices from which booting can be carried out. Therefore, when reinstalling the OS, you cannot do without entering this section.

Main BIOS sections

Until recently, the BIOS menu structure consisted of a huge number of items. It will be quite difficult for an inexperienced user to understand the meaning of each item. In addition, many manufacturers prefer to change these items at their discretion. Today the situation has changed radically. The process of working with the BIOS has been standardized, which has made it possible to significantly simplify the process of working with basic settings. Even a novice user can now easily cope with this task. In most cases today, BIOS items include the following sections:

1. MAIN – current time and date, list of connected media and their characteristics;
2. ADVANCED – advanced system settings (SATA, CPU, PCI). It is better to undertake the correction of this section with certain knowledge and computer skills.
3. POWER – allows you to determine the current temperature and voltage.
4. BOOT – this section establishes the procedure for using boot sources used when reinstalling the operating system.
5. SECURITY – contains passwords for accessing the BIOS and other PC resources. If you have set a password in this section, it is better not to forget it. There is no need to enter the basic settings every day, so you can easily forget the password. If you need to work with the BIOS, you simply will not be able to log into the system due to the lack of a password. To reset a password on a laptop, you need to perform fairly complex technological operations.
6. EXIT – this section specifies options for exiting basic settings. This section also implements the ability to return all values ​​to their original state.

The most important BIOS section among those listed is the ADVANCED section; it is recommended to be used only by well-trained PC users. If you set incorrect parameters in this section, your computer may completely lose its functionality. It is also not recommended to change anything in the BOOT section without basic training. Be sure to take this into account when working with the BIOS. The SECURITY section is also a rather problematic item. If you set a password in this section, then it is better not to rely on your memory, but to write it down somewhere. The remaining BIOS sections should not cause any particular difficulties. Even an inexperienced user who has just begun to get acquainted with computer technology can work with them.

BIOS features for laptops from different manufacturers

Sometimes the method of entering the BIOS depends on the device manufacturer. Today the main manufacturers of such products are:

- Award BIOS: was the main supplier of these products until recently, but lost its leading position and was absorbed by another developer company - Phoenix BIOS.
- AMI BIOS: is the main supplier of BIOS chips today.
- Phoenix BIOS.

The products of the manufacturers listed above can often be found on desktop computers. It is important for laptop manufacturers to optimize the process of managing a laptop computer. Therefore, each manufacturer prefers to develop its own unique procedure for accessing the BIOS. There are even cases where the procedure for entering the BIOS differs for different laptop models of the same manufacturer. As a rule, all information that may be of interest to the user appears in the first window during the boot process of the personal computer.

You need to find the phrase “Press... to Setup”. Most often, instead of three points, F10, F2 or Del is found. Also, function keys or various combinations can be used for these purposes. Information of interest to the user may also be hidden behind the manufacturer's logo. This option is also installed in the BIOS. To remove it, you need to press Esc. It is important to take into account one feature: you can enter the BIOS only during boot startup and testing. You will not be able to enter the BIOS while the OS is running.

Entering BIOS on an HP laptop

Let's try to figure out how to enter the BIOS on an HP laptop. This company until recently occupied a leading position in the laptop computer segment. Today, in terms of the number of products sold, it has been replaced by Lenovo. But the quality of HP products remains high. How to enter the BIOS on an HP laptop? To do this, you need to use the F10 function key. Most devices from this manufacturer use this function button to enter the BIOS.

Thus, to access the BIOS on HP laptops, you just need to press F10 when booting starts. If you need to change the boot order priority, press the F9 button at the same time. As a result, a menu should open with a list of available devices. In this menu, you need to select the device you are interested in and press “Enter”. To quickly return to the main menu on HP devices, you must use the Esc button.

Entering BIOS on a Lenovo laptop

Now let's figure out how to enter the BIOS if you are using a Lenovo laptop. This manufacturer, unfortunately, does not pay much attention to standardization, so it is quite difficult to give an unambiguous answer to the question of how to enter the BIOS. Different models may use the F1, F2 and Del keys for this purpose. You can obtain information for each specific model by studying the instruction manual. As a last resort, you can try using the selection method at the laptop testing stage.

Each key requires a separate boot, otherwise it will be difficult to find the answer to the question of which key you need to press when booting your Lenovo laptop to get into the BIOS. You can try to quickly press each key and access the BIOS, but in this case it will be difficult to determine which key worked. Remember that you should perform such actions only when rebooting or starting your personal computer. It is impossible to get into the BIOS during operation.

Entering BIOS on a Samsung laptop

The hardest part will be for users using Samsung products. To enter the BIOS on a laptop from this manufacturer, you can use three key options - F12, F4 and F2. There shouldn't be any problems with the last two - they are all on the standard keyboard. But the first option may cause some difficulties. Not every laptop has a full keyboard. To optimize the appearance of the device, the manufacturer often uses a truncated version of the keyboard.

In this case, the device may only have function keys F1 through F10. The last two keys of the standard keyboard - F11 and F12 can be combined with F9 and F10, respectively. As a result, access to the BIOS becomes significantly more difficult. Thus, to enter the BIOS on a Samsung laptop, you need to press not just one button, but a whole combination. In the message that is displayed when the download starts, we will talk about only one key - F12.

Experienced users should realize that to switch the input mode, you need to press the Fn function key. That is, to enter the BIOS, you must first press the Fn button, and then, without releasing it, press F12. The Fn key is usually located in the bottom row of the keyboard, not far from the Win key. The main purpose of this key is to switch the keyboard layout. When it is released, the keyboard has one input option (the symbols are shown in the upper right corner of the keys), and when it is pressed, the second input option works (the symbols are shown in the center or right corner).

To make working with the Fn key easier, the manufacturer usually uses the same colors in the design of the function button and the layout it activates (this can be red or blue). Now we can draw some conclusions. To enter the BIOS on different models of Samsung laptops, when you turn it on and an information message appears on the screen, you need to press exactly the key or combination that is indicated in the device’s instruction manual.

Entering the BIOS on a Sony laptop

Entering BIOS mode on a Sony laptop is not that easy. Everything will depend on the age of the device. On older models, the F2 key is usually used, on new ones - F3. Try using these buttons to enter the BIOS. If during the system testing stage you press the desired key, you will be able to enter the settings. If you don't know which key to use to enter the BIOS, try reading the operating documentation or looking at the messages that appear when you boot your PC (note the phrase “Press...to Setup”).

The key you are interested in will be indicated between the first and third word. On some devices, the company logo appears at this stage. To remove it, simply press Esc. If you manage to press the right button, you will be able to enter the BIOS. Otherwise, you will have to reboot the system again and press the button to enter the BIOS when the manufacturer's logo appears.

Entering BIOS on an Acer laptop

Let's figure out how to enter the BIOS on laptops manufactured by Acer. By default, the basic settings of devices from this manufacturer have an option that displays the company logo on the screen. This makes things a little more difficult. To remove the screensaver, press the Esc button. After this, you need to have time to notice the conditions for entering the BIOS. As a rule, on older models the Ctrl+Alt+Esc key combination is used for this purpose, and on newer devices the F2 key is used. You may not have time to press the desired combination the first time. In this case, simply restart your device and try again. After this, you will have access to the BIOS without any problems.

Studying the documentation

Another way to find a way to enter the BIOS is to study the operating documentation. Typically, a laptop comes with a disk that contains, in addition to all the necessary drivers, an instruction manual. This document should describe in detail the mechanism for entering basic settings, indicating all the necessary keys and their combinations. You can write this information down somewhere; it will most likely be useful to you in the future.

Looking on the Internet

This method is universal. Using it, you can easily find out how to enter the BIOS on a laptop, netbook or desktop computer. If you were unable to find out how to enter the BIOS using all the methods outlined above, and the set of documentation was lost, you can try going to the official website of the device manufacturer and downloading the instruction manual in electronic form from there. To study the manual, you will likely need a PDF program such as Adobe Reader.

You can also download it on the Internet from the official website of the developer company. After this, the program must be installed on your computer. Now you can easily open the user manual and find the section you are interested in. After completing all the necessary operations in the BIOS, you need to restart the computer.

Conclusion

In this review, attention was paid mainly to working with BIOS on laptops from different manufacturers. Using simple recommendations, even an inexperienced PC user can cope with this task. The main problem in solving this problem is related to the lack of unification. Each manufacturer imposes its own procedure on the user for entering the BIOS.

I am glad to welcome you, my dear readers. In my series of articles about ways to enter the BIOS, I left the most seasoned manufacturers of modern technology for dessert. And today I will talk about how to enter the BIOS on a Samsung laptop.

Despite the big name and leadership in the markets of other devices, Samsung laptops are no longer among the top three in terms of sales in Russia. But they consistently make it into the Top 5. This means that among you, friends, there will be many users who will be especially interested in this article.

Let me remind you that the basic system settings are hardwired into one of the chips on the motherboard, and work with them is carried out using a simple program called. In it you can set the date and time, work with passwords, change the order of work with boot devices, disable the touchpad, adjust the frequency of the processor and RAM chips, and set power parameters.

Of course, the most common use of BIOS is booting from a flash drive to install Windows. In the same way, you can restore the system while saving important data.

Let's go to BIOS

As you can see, knowing how to enter the BIOS, you can solve many complex problems. So let's get down to business quickly, but first make sure that your laptop won't accidentally turn off while working with system settings. This is highly undesirable as it can practically destroy your device ;).

But let's not talk about gloom, just recharge the battery or connect the power supply (to be on the safe side, use both energy sources).

Now turn on or reboot your desktop computer and immediately start pressing the “magic” “F2” key a couple of times per second. In most cases, you will see the BIOS in front of you.

Each BIOS has its own approach

But this option may not work. The fact is that although Samsung has not conquered the entire laptop market, it has presented a large number of different models (NP, R, RC and others), which, in addition to the electronic filling, also differ in the way they enter the BIOS.

• For example, for the RV 513 line, in addition to F2, it is worth trying Delete;
• The ATIV Book series, which is small in number, also has its own exception to the general rule. ATIV Book 4 450R5E-X07 owners should remember the “F8” button.
• In the most common NP 300 series, the main key is F2. But in the NP 300V5AH model you should press F10;
• In the more advanced model NP900X3E, you need to press two “Fn+F12” keys at once.

As you can see, there can be a variety of ways. And this is largely due to the hardware of your laptop.

Therefore, in addition to F2, you should always have in stock such “BIOS” keys as F8, F12, Delete, or the popular key combinations “Fn+F2”, “Ctrl+F2” or “Fn+F8”. But it’s better to still pay attention to the inscriptions that appear on the monitor during the loading process. Especially these ones: “Press (key) to run setup.”

This is what you and I are looking for.

Actually, this is all you need to know to load BIOS smoothly on a Samsung laptop. I think you can easily master these simple skills. And you will be able to handle your PC at a professional level.

With that, I wish everyone good luck and say: “See you soon on my blog!”