How to enter safe mode. How to start a laptop in safe mode: tips and tricks How to enable safe mode on acer aspire

In today's article, we'll look at how to enter Windows 10 safe mode if the laptop/computer is working properly or the operating system does not start for some reason. The fact is that the usual way of calling a window with choosing an option to launch the operating system has become irrelevant. It has been replaced by several methods that allow you to turn on your PC in safe mode.

Windows 10 Safe Mode, called Safe Mode, is a diagnostic boot mode of the operating system designed to find and solve many problems in the operating system in order to return it to a working state. This mode is used in cases where the computer refuses to start in normal mode, from the last known good configuration, or it is impossible to perform any action due to the use of target files and drivers of Windows 10 itself.

When the PC boots into Safe Mode, only the components necessary for starting and operating the operating system, such as drivers, system services, Explorer, and the OS kernel, are placed in RAM. Application software and drivers for peripheral devices that are not needed for computer operation are not loaded.

Safe mode is useful for removing viruses, fixing errors with drivers that have arisen due to their imperfection or incomplete compatibility, eliminating the cause of blue screens and freezes, uninstalling programs, restoring the system, activating an administrator account, etc.

Using the operating system configuration menu

The option to boot the computer into safe mode, familiar from the 7, is to use the system configuration utility.

1. Launch the command interpreter, represented by a dialog box called “Run”, which is launched using “Win + R”.

2. Enter the “msconfig” system command, which launches the utility for configuring the launch of Windows 10.

By the way, the command can be launched through the Windows 10 search bar.

3. In the window that appears, activate the second “Boot” tab and select the operating system that should be launched in diagnostic mode.

4. Check the box below the form with the list of OSes for the “Safe Mode” option.

“Minimal” - classic safe mode with a minimum of system components and Windows Explorer;
“Other shell” is the new name for the configuration, which was called “Command Line Support”;
“Network” - with the launch of network drivers in order to use the network connection.

6. Click “Apply” to confirm your intentions and click “OK” to close the window.

7. Using the “Start” menu or another convenient option for shutting down the computer, reboot it.

8. After we launch the system configuration window, and on the “Boot” tab, uncheck the previously checked box in order to return the computer startup to normal mode.

Special launch options

Another method that allows you to start Windows 10 in safe mode if it starts. As in the previous version, all actions consist of performing simple operations.

1. Open the “Settings” window using the search bar, the “Win + R” combination, or the “Start” button.

2. Click on the title of the “Update, Security” section, where we go to the “Recovery” subsection.

3. Find the item “Special options...” and click on the “Restart now” button.

4. After the equipment self-test, a screen of additional computer startup options will appear, where we select the “Diagnostics” option.

5. Then click on “Additional options”, “Boot options” and click “Restart”.

6. In the startup options menu, select the desired computer startup mode using the F4 - F6 keys.

In order to launch “Special options” in the case when the “ten” does not load, but the lock screen is displayed, while holding down the “Shift” button, select the “Restart” option after clicking on the button to turn off the computer.

Using the boot device to invoke safe mode

Don't know how to enable safe mode on Windows 10 when it won't start at all? Read the current section to the end.

The only thing you need to run Ten in diagnostic mode is bootable media with operating system installation files. An OS recovery disk is also suitable, but it is available to a limited number of users.

1. Launch from a bootable USB flash drive using the Boot Menu of your BIOS.

2. Press the “Shift+F10” keys to launch the command line or click on “System Restore” in the window with the “Install” button, where we call “Diagnostics”, go to additional parameters, call the command line.

3. Using the command line, run the command: “bcdedit /set (default) safeboot minimal” to launch the classic debugging mode, and then replacing “minimal” with “network”, we boot into diagnostic mode with the launch of network drivers.

4. Close the command line window and reboot.

5. After solving the problems, reboot the OS, launch the command line as before, and enter and execute: “bcdedit /deletevalue (default) safeboot” to turn off safe mode.

Last method

This method will display a window where you can select one of the advanced Safe Mode options. Moreover, it is applicable to any operating system installed on a PC.

Call the command line by booting from the installation flash drive.
Enter a long command: “bcdedit /set (globalsettings) advancedoptions true”.
After a notification appears about its successful completion, reboot, closing the command line.

After the computer restarts, a window will appear with a list of advanced OS boot options.

Next, to deactivate this method of turning on the computer, you need to run: bcdedit /deletevalue (globalsettings) advancedoptions. The command is entered into the command line, called with administrator privileges.

We return the menu called by the “F8” key

If you want to know how to enter Windows 10 safe mode using the classic method - the “F8” key, read the lines below.

Returning the call to the window with a list of methods for starting a computer is done by editing the “tens” launch configuration file.

1. Launch the command row with the privileges of an administrator account.

2. Execute “bcdedit /deletevalue (current) bootmenupolicy”.

3. After the text “Operation Complete” appears, restart the computer.

4. After self-testing the hardware shell, press “F8” until we see the familiar window with an expanded list of options for launching “dozens”.

To cancel calling the extended list of PC startup options, use the command “bcdedit /set (current) bootmenupolicy standard”.

Choose the appropriate option and fix errors in the functioning of Windows 10 without having to reinstall it.

There are two ways to enter safe mode on classic Acer laptops and on Aspire series devices. The first method concerns the case when the laptop works with errors, but still boots. The second is intended for the situation when the system does not start at all, errors and other troubles appear. Let's consider both methods in relation to the Windows 10 operating system.

Method one

If you can boot your Acer laptop, then turn it on. Wait until the download completes, and then enter the word “MSCONFIG” in the search bar for all programs.

Open the found utility. The “System Configuration” window will appear on the monitor, in which you need to go to the “Download” tab.

At the bottom of the window, you need to check the box next to the “Safe Mode” line, save all changes, and then restart the laptop. If you think that your inept actions can cause harm to the device, seek help for professional setup and repair of laptops; our specialists are ready to help you in any situation.

After these manipulations, the device will automatically boot into safe mode, as you wanted. Once the need for this has been exhausted, you will have to open MSCONFIG again and return the System Configuration window to its original form.

Method two

If the device does not boot, then you need to find a boot disk with Windows 10. Make all the settings as before installing the OS. Language settings do not need to be changed.

In the next window, you need to click on the “System Restore” line, as shown in the photo.

From the Select Action menu, select Diagnostics. Then, in the window that opens, click on the “Advanced options” button, and then select “Command Line”.

A black window will open. In the specially designated space you need to enter the command “bcdedit /setadvancedoptions true” and press “Enter”. After that, close the window and click “Continue”.

The device should reboot. Boot the laptop in normal mode (not from a disk), and a menu for selecting boot methods will appear on the monitor.

Select the mode you need and get to work. To disable this feature, you need to boot from disk again and enter the value “bcdedit /deletevalueadvancedoptions” into the command line.

Safe mode in Windows 10 is necessary for debugging and troubleshooting the operating system and software: problems with drivers, removing viruses, troubleshooting errors, etc. In Safe Mode, only standard programs and drivers necessary are loaded with the system for the system to operate in safe mode.

In Windows 7, to enter safe mode, at the very beginning of the system boot, you need to press the “F8” key. This method does not work on Windows 10. According to Microsoft representatives, starting with the Windows 8 operating system, to speed up computer boot time, the use of the “F8” key was disabled, because this key did not have time to work.

How to enter Safe Mode in Windows 10? You can start Safe Mode in Windows 10 using other methods. In this article, I will talk about the four easiest ways to enter Safe Mode in Windows 10 (there are other more complex ways).

Three methods for booting Windows 10 in safe mode can be used in a working operating system, and the fourth method will help if the Windows operating system does not boot at all on the computer.

How to Boot into Safe Mode in Windows 10

The first method: enter safe mode using the system tool, which works on the operating systems Windows 7, Windows 8, Windows 8.1, Windows 10.

Press the key combination “Win” + “R” on your keyboard. In the Run window, type: "msconfig" (without quotes), and then click on the "OK" button.

In the System Configuration window, open the Boot tab. At the bottom of the window, activate the “Safe Mode” item. By default, the minimum load is selected. Therefore, if you need network connections in Safe Mode, check the “Network” checkbox to load network drivers.

After this, the Windows 10 operating system will start in safe mode. Before finishing working in safe mode, enter “Computer Configuration” using the method described above to disable safe mode.

How to enable Safe Mode in Windows 10

The second method is suitable for users of the operating systems Windows 10, Windows 8.1, Windows 8. A new “Safe Mode” item (or something like that, at your discretion) will be added to the boot menu that opens before starting Windows 10.

Right-click on the Start menu. In the menu that opens, click on “Command Prompt (Administrator).” In the command line interpreter, enter the command:

Bcdedit /copy (current) /d "Safe Mode"

This text must be entered with spaces, where they exist, and quotation marks from the English keyboard layout. After entering the first quotes, switch to the Russian keyboard layout, enter the text: “Safe Mode” (or something similar), then switch to the English layout, enter the second quotes.

After that, simultaneously press the “Win” + “R” keys on the keyboard. In the “Run” window, enter: “msconfig”, click on the “OK” button

In the “System Configuration” window, in the “Boot” tab, you will see that a new “Safe Mode” entry has appeared among the list of operating systems. Here you can select the minimum boot in safe mode, or boot from the network. In the “Timeout” field you can change the display time of the boot menu. By default, the menu will be displayed for 30 seconds, you can select a different time period, for example 10-15 seconds.

Before starting the operating system, the “Select operating system” window will open. This window offers a choice of two options: “Windows 10” and “Safe Mode”. Using the arrow keys on your keyboard, highlight "Safe Mode" and then press the "Enter" button.

If you do not select anything in this window, then after a certain period of time, Windows 10 (Windows 8.1, Windows 8) will be launched.

This window will open before each startup of the operating system.

To remove the system selection menu, enter “System Configuration”, highlight “Safe Mode”, and then click on the “Delete” button. After rebooting, Windows 10 will be immediately loaded.

Boot Windows 10 in Safe Mode

The third method is to boot into safe mode using a special boot option. Press and hold the “Shift” key on your keyboard, go to the “Start” menu, click on the “Shutdown” button, and then in the context menu that opens, click on “Restart”.

This will open the Select Action window in Windows Recovery Environment (Windows RE). Click on "Troubleshooting".

In the Advanced Options window, select Boot Options.

In the "Boot Options" window, click on the "Restart" button.

In the next window you will need to select one of the following safe mode options:

Enable Safe Mode (F4).
Enable safe mode with loading network drivers (F5).
Enable safe mode with command line support (F6).

To select boot options, use the number keys, or the function keys “F4”, “F5”, “F6”.

After selecting the appropriate mode, the Windows 10 operating system will start in safe mode.

Entering Windows 10 Safe Mode if the system does not boot

The previous methods work when the operating system is working: Windows 10 boots first, and then enters Safe Mode. If the operating system does not boot at all, then you can enable safe mode in Windows 10 using a bootable USB flash drive or an installation DVD with an image of the operating system.

Boot your computer from a bootable USB flash drive or DVD. After this, “Windows Installation” will begin (don’t worry, we won’t install the system).

Next, the “Select Action” window will open (see image No. 6 for the previous method above, the images are identical for both methods). Next, in the “Diagnostics” window (image No. 7), click on “Advanced parameters”. In the “Advanced Options” window (image #8), select “Command Prompt”.

In the next window you will be asked to enter a password for your account. If your computer allows you to log in without entering a password, do not enter anything. Next, click on the “Continue” button.

A command line interpreter window will open. Enter the following command at the command prompt:

Bcdedit /set (globalsettings) advancedoptions true

After entering the command, press the “Enter” key. Close the command prompt window when the operation is complete.

In the Select Action window, click Continue.

After the computer restarts, you will see the “Boot Options” window (see image No. 10 above, for the previous method). Here, using the keyboard keys, you need to select the appropriate item to boot the system in safe mode: “Enable safe mode”, “Enable safe mode with loading network drivers”, “Enable safe mode with command line support”.

Every time you start Windows again, you will see the Boot Options window. To boot the system normally, you need to press the “Enter” key.

In order to remove the “System Settings” window every time you boot Windows, you need to boot again from a bootable USB flash drive or DVD, and then select “System Restore” in the “Windows Installation” window. Another option: Press and hold the Shift key, go to the Start menu, click on the Shutdown button and then Restart.

Bcdedit /deletevalue (globalsettings)advancedoptions

Close Command Prompt, and then turn off your computer. Now, after starting Windows, you will no longer see the Startup Options window.

Conclusions of the article

You can enter Windows 10 safe mode using the system tool. After adding an additional item to the boot menu, you can choose to boot into safe mode when Windows 10 starts. Using special boot methods in the Windows RE recovery environment, you can launch various options for Windows 10 safe mode. Using a bootable USB flash drive or installation DVD, you can boot Windows 10 in safe mode when the system does not boot.

Experienced PC and Internet user

How to enter safe mode in Windows 8!?

Safe boot mode of the operating system is an option to load the minimum required number of functions and software.

When you log in using Safe Mode, labels appear in the corners of the screen.

This is used to diagnose system problems. The absence of a problem when running in safe mode allows you to exclude essential services from the suspected causes.

Also, a large number of problems can be resolved only from .

There are several options available to initiate system startup in this format. This can be done using either a simple keyboard shortcut or a bootable optical/flash drive.

Method #1: Keyboard shortcut during boot

This option is known to most confident users of earlier versions of the OS who know how to enter safe mode windows 8 while loading.

It consists of several quick presses of “F8” before the system boots.

In some cases you will need to use “Shift + F8”. As a result, a screen should appear with a list of download options.

Using the arrow buttons, select “Safe Mode” and confirm your selection with the “Enter” key.

In the latest version of the operating system, this option may not be compatible on all PCs.

If you cannot use the combination of buttons mentioned above, then you should take the following actions:

After these manipulations, loading can be done using hot keys.

The described method will help answer the question of how to enter Windows 8 safe mode on an HP laptop.

Method #2: OS Configuration Tool

To call the utility to configure operating system settings, you will need to press “Win + R”. This action will open a execution line in which you will need to enter “msconfig”.

After pressing “Enter” or “OK” the settings window will appear directly. In it you need to open the “Download” tab.

At the bottom of the window, in the “Boot Options” field, you must select the “Secure Boot” and “Minimum” items.

After agreeing to all the above settings, you will be prompted to reboot.

It can be confirmed, or it can be postponed. This will allow the computer to apply the settings after the first OS restart.

Note! The system will always boot in Safe Mode until the user deselects the boot options. After fixing problems, it is important not to forget to return the settings to normal.

Method No. 3: Diagnostic tools

If you need to activate the buffer format of a running OS, then it is better to use the following method. To do this, you will need the “Options” button on the sidebar.

Then you will need to select “Shutdown” and, while holding down the “Shift” button, click on the “Restart” item.

These steps will launch the diagnostic screen. On the “Select Action” screen, click on “Diagnostics”.

In the Diagnostics window, you will need to open Advanced Settings.

On this screen, you need to select the “Download Options” option.

Here you will see a list of conditions under which the OS will boot. After familiarizing yourself with the parameters, you need to click the “Restart” button.

In the next step, the diagnostic program will present several boot options. The selection is made using the “F1-F9” keys.

The list requires a fourth item, that is, you will need to press F4.

After these manipulations, the computer will boot into safe mode and you can perform the necessary actions.

Some users think: “how to enter Windows 8 safe mode through BIOS?”

So this is impossible to do, because the BIOS is not connected to the OS.

Method #4: Bootable optical or removable disk

This is the most effective way to enter Windows 8.1 safe mode if the system does not start. You don't need to boot your system to use it.

You will need to prepare the appropriate media with installation files.

Then you will need to connect a removable disk (insert the optical drive) and boot from it.

In the window for setting the time and date, you will need to click “Next”. Then, when the installation window loads, you need to click on “System Restore”.

This will bring up the diagnostic screen. It was already used in one of the previous methods, but this one is somewhat different from the previous one.

In the “Select an action” section, click on the “Diagnostics” item.

Then, on the “Diagnostics” screen, select “Advanced Settings”.

On the next screen you need to select an item that will launch the command line.

A window will appear where you need to enter the following: bcdedit / set globalsettings and confirm the command using the “Enter” button on the keyboard.

After troubleshooting, you will need to write the following line in the command editor: “bcdedit /deletevalue (globalsettings) advancedoptions”.

This will cancel the transition to the diagnostic screen during boot.

Then the command line can be closed. Then select “Continue”.

Rebooting the system will lead the user to the already familiar diagnostic screen with a selection of options using the “F1-F9” keys. After pressing “F4” the system will boot into safe mode.

One of the methods described above will certainly help for both PCs and laptops.

Therefore, the question of how to enter Windows 8 safe mode on an Asus laptop or how to enter Windows 8 safe mode on a Lenovo laptop does not make sense, because the OS does not differ from the brand of hardware.

What is safe mode in Windows 10 and how to get into it if the operating system does not boot? If you have problems booting Windows 10 (or 8.x), you can't use the usual "lifeline" that Windows 7 provides - using the F8 key during computer startup to access additional boot options. In particular, in this way in the seventh version you can get into safe mode and try to solve the problem using standard means. For example, if the solution to the problem may be to remove the driver or change the system settings. The Shift+F8 keys, which in theory can be used when loading Windows 10 to get into the system recovery environment (and this is an analogue of the Seven boot options), are not so easy to use in practice. You will need to practice several times to catch that very moment of reduced system loading when the Shift+F8 keys can work.

Why is it needed?

Safe Computer Mode is a specific Windows state designed to resolve various problems.

In this case, only the most necessary devices and components to maintain the functionality of the OS are used. Safe mode means that you can work with administrator rights; it also allows you to delete files that the system or third-party software would not allow you to delete under normal conditions.

OS Safe Mode is an environment used to remove incorrectly installed drivers and cancel unsuccessfully applied system settings. For example, if you set a screen resolution that is not supported by the monitor, it will not always be possible to change it to one supported by the latter within a fully functioning system. So, there may simply be no image on the screen, and if there is no other monitor at hand that can display the image with the applied resolution, there is no other way to solve the problem than using safe mode. Instead of a video driver, the monitor uses the VGA standard, which is supported by all video cards designed for Windows devices.

Safe mode is one of the solutions to the problem of viruses penetrating the OS and blocking the operation of anti-virus programs. If the part of the system registry responsible for loading safe mode is not damaged by malware, you can try to run an anti-virus scanner, delete the startup file and/or virus process in the task manager, and also apply other actions to resuscitate the system.

Running system configuration section

Using the configuration section of a running system, you can get into the safe mode of Windows 10 by making some settings and rebooting. Right-click on the “Start” button and select the “Run” function.

In the field for entering commands we write:

Msconfig

After pressing Enter we will see the system configuration window. We are interested in the “Download” tab, here we check the “Safe Mode” checkbox.

By default, the system configuration provides a minimum type of safe mode, when startup programs do not start, there is no sound, the network is disabled, only basic drivers for the video device, hard drive, keyboard mouse and other devices necessary to maintain the minimum performance of the operating system work.

You can install other types of Safe Mode in Windows 10. By selecting “Other shell”, safe mode will be without the usual graphical interface, but only with the command line. This may be relevant if explorer.exe, a system service that ensures the operation of the OS Explorer, fails.

The item “Restore Active Directory” provides for loading safe mode with a graphical interface and a minimum number of active services, including the Active Directory directory service. If you need to access network resources, then in this case you need to select the “Network” item. It provides, accordingly, for the operation of the network card driver.

Having made your choice, click “Apply” at the bottom of the window and then “OK”.

After rebooting, Windows will start in safe mode.

The process for setting up Windows 10 to boot normally is reverse. In the system configuration section, the “Safe Mode” checkbox must be unchecked.

Shift key and reboot button for a running system

Another way to get into safe mode if Windows is in a working state is to use a single press of the Shift key and the restart button. Open the Start menu, click on the shutdown button and, while holding down the Shift key on the keyboard, select the option to restart the computer.

This will take us to the Windows 10 recovery environment. Here we first need the diagnostics section, then the additional settings section.

All sorts of boot options will appear before us - by pressing the F4, F5 or F6 keys, you can get into the safe mode of the corresponding type.

Safe mode for a non-bootable system

If Windows does not start at all or, for example, a resolution that the monitor does not support is mistakenly applied, displaying a message about this on a dull black screen background, you can boot into safe mode and try to find a solution to the problem, as in the previous case, using the system recovery environment .

As mentioned above, pressing Shift+F8 while Windows is loading may not always work, so a more reliable way to get into the recovery environment would be to boot from the installation disk or from one previously created by standard system tools.

When booting from the latter, we find ourselves in the recovery environment immediately after selecting the language. If the computer is booted from the installation disk, click “Next” in the welcome window.

The next steps are “Diagnostics” and “Advanced options”.

In the command line window we write:

bcdedit /set (globalsettings) advancedoptions true

and press Enter.

The operation was successful, close the command line and in the action selection menu click Continue using Windows 10.

After which we will see a list of download options.

If in safe mode you can eliminate the reason that prevents booting, and you can avoid reinstalling the system, in the future the computer will always boot with a menu of boot options. It is very easy to fix this using the same command line, which we now open by selecting from the contents of the context menu on the “Start” button.