APN Yota is an access point that works like everything else using APN technology, however, when using it there are a number of features associated with bypassing the restrictions of the Yota network.

It’s worth noting right away that the APN access point in (Android) is usually configured automatically, so a new subscriber to a mobile operator does not need to perform any additional actions. At the same time, for some reason, automatic configuration may not occur.

Setting it up in iOS

In most cases, after inserting into the slot and rebooting the device, the new SIM card is quickly automatically registered on the network, as indicated by the mobile operator icon on the display. APN settings have their own characteristics.

In the case of gadgets running iOS, you must first enable data transfer on the mobile network, and then wait for the connection to be established. Then you need to open a web browser and go to any site, from where you will be redirected to the profile registration page. You must register your profile and only then start configuring the access point.

Setting up the APN of the Yota access point in iOS gadgets is done as follows:

• • Go to the “Settings” section.
  • Select the following items: “Cellular Communications” > “Cellular Data”.

• • Then, with your own hands, in the free column “APN access point” we indicate the data of the telecom operator - internet.yota.

• All other free fields should be left untouched - you do not need to enter anything in them.
  Finally, we need to tick two functions – supl and default.
• After all the manipulations, the gadget should be rebooted.
• Configuring the APN access point for the Iota Internet is completed. After rebooting the device, you can select a tariff plan and start using the service.

Setting it up in Android

The setup principle here is largely similar:

• • Go to the “Settings” menu.
  • Select the items “Wireless networks” > “More” > “Mobile network”.
  • We see the “Access Point (APN)” field and make exactly the same entry as in the case of iOS.

• • The remaining fields should be left blank.
  • Reboot the device.
  • This completes the settings for the Eta access point on Android.

How to distribute Wi-Fi from your phone?

Today, owners of smartphones and tablets that run Android OS cannot share the Internet. Distributing Wi-Fi Yota from a phone is prohibited at the software level. The company states that for distribution you need to use .

Of course, distributing Wi-Fi via Yota is possible if special applications are installed and root rights are obtained. But for inexperienced users these manipulations are too complex.

Yota is a telecom operator that is radically different from others. This is manifested not only in advertising or design: the user can make almost all settings in the application, without leaving home. Favorable tariffs and unlimited Internet will appeal to young people. And communication without roaming throughout the vast territory of Russia will be convenient for people whose work requires frequent business trips. However, problems may arise at first. For example, in the Yota Internet APN settings. This article will help you deal with them.

Yota - the mobile operator of the future

Yota really does provide unlimited Internet at a fairly affordable price. The quality of the network connection differs from other operators only in speed. The named operator makes the Internet available in different places of the Russian Federation. So, you can now enjoy it while staying outside the city.

Another nice feature of Yota is the lack of roaming. If the user has moved to another city, prices for communication services remain the same. Unfortunately, this feature is only available for thirty days in a new region. Next, the operator offers to change the tariff.

All operations with your SIM card can be easily carried out in the application. The option of tariff and other manipulations is available there.

However, not everything is so rosy. Yota has disadvantages that stop many people from buying their SIM card:

1. Limited coverage area.
2. Working with the application. For many users it does not function and is “buggy”, and in general not everyone is ready to spend time studying it.
3. The phone will not be able to distribute the Internet. In addition, problems arise in Yota - APN settings. Sometimes you have to configure the SIM card yourself.

How to install a SIM card?

You just need to activate the card. You need to download the Yota application (for iPhone in the AppStore, for Android in PlayMarket), and then insert the SIM card directly into the smartphone. You should also add an access point (APN) - internet.Yota. There is no need to change other settings. After all these manipulations, check the box next to the “Data roaming” line and then restart your mobile device. All is ready.

If the application on your phone does not work or for some other reason you cannot use it, you can type the following commands:

• *567# - activation;
• *106*N# - connection to a package of minutes and the Internet (N - amount of selected time).

Automatic Network Setup

As soon as the SIM card is activated, you will receive a message with data for installing the Internet. Modern mobile phones quickly recognize these coordinates. In the event that a message has been deleted or sent to the spam folder, it is possible to get automatic Network settings again. To do this, you can contact a consultant through the application, by phone or using the operator’s website.

If the phone cannot determine these parameters on its own, then you need to install the Internet manually. To do this, you just need to understand Yota. Setting up APN is quite easy.

What to do before setting it up manually?

Before you start creating an APN yourself, you should review some settings on your phone. Perhaps this small check will help save a lot of time and nerves. To begin with, it’s worth recalling that all MMS and Internet parameters come as an SMS to your phone and are installed automatically. So what to do in the APN Yota settings? You need to be sure that this did not happen, and only then start working with the connection.

Owners of iP hone 5 need to know: the model does not support operation with Russian mobile operator companies. In this case, it is better not to purchase Yota at all. The Apple smartphone of this release is not intended for Russian providers.

If the phone supports domestic operators, and its owner can’t wait to configure it manually, it’s worth checking the coverage map. The region is part of the network zone, which means Yota will function normally. You also need to disable WI-FI on your mobile device and enable Yota data transfer. APN settings should only be made with the connection enabled. Without this, you cannot start work.

Setting up APN on a mobile device

Creating a hotspot is slightly different depending on your phone's operating system. On Android, just follow these simple commands to set up the Internet:

• You need to go to the “Settings” section, click on “more”.
• Setting up APN Yota on Android is very simple - you select the “mobile networks” item on the page that just opens, and then click on “Access points” and configure the Internet there. You just need to enter APN: internet.Yota and come up with a name for it.

If you have connection problems on your Apple device, don't despair - it's quite easy to install. This is done as follows:

• First you need to go to the "Settings" section.
• Next, find “cellular communications” and click there.
• The “cellular data” section will appear on the screen. In it, enter APN internet.Yota, and leave all other fields empty.

If the lucky owner of a Windows Phone also has problems with the Internet, they can be easily fixed. This is done by analogy with Android. You need to go to the “settings” section, select “access point” and add it - internet.Yota. After rebooting, you can enjoy unlimited Internet on your phone.

How to install a modem

Many people prefer home Internet to mobile Internet. What should users of this operator do in this case? In order for APN 4g lte to occur, you need to follow the following procedure:

1. In the “username” item you must enter Yota1.
2. In APN - internet.Yota.

Similar to setting up a mobile connection. Yota home Internet has many advantages. You can easily switch from one tariff to another or immediately pay for the annual provision of services.

Many inexperienced users may have problems with seemingly basic things. How to activate a SIM card or set up the Internet in Yota? APN settings, as you might guess, are unknown to the average user. Many are accustomed to such services from employees of cellular communication stores and do not understand what to do. In this case, there are two options: go to the salon or try to set everything up yourself. For those who preferred the latter, this article will be useful.

APN (Access Point Name) is the conventional name of a GPRS/3G access point of a mobile operator, through which the user connects to a data service (WAP, Internet, MMS). The stable operation and pricing of the service depends on the correct APN settings.

Errors when setting up APN are one of the most common failures of GPS trackers. In this case, the data is not transmitted, the object does not appear on the map, and a perfectly working tracker seems to “not work.” It is usually convenient to configure APN on a GPS tracker using SMS commands.

Russian Federation

Beeline / Beeline Russia (GPRS/EDGE)

Regular SIM card "BeeLine"

A regular SIM card can be purchased at communication stores. The balance of a regular SIM card is monitored by the user himself.

APN: internet.beeline.ru
Username: beeline
Password: beeline

SIM card "BeeLine Business"

This SIM card is purchased through partners of the BeeLine operator, usually complete with equipment.
The BeeLine Business SIM card is supplied by GlobalSat as part of a set of GlobalSat TR-203 LOCK SIM GPS trackers and other trackers purchased along with the connection. The balance of such a SIM card is replenished automatically when paying for GPShome.ru monitoring services.
To send SMS commands to SIM cards included in the GlobalSat tracker kit, it is planned to launch a special gateway in the GPShome.ru monitoring system.

The "BeeLine Business" SIM card in Chita works only with the "National Roaming" service enabled; in Ulan-Ude it does not work.

APN: m2m.beeline.ru
Username: beeline
Password: beeline

MTS / MTS Russia (GPRS/EDGE)

Regular SIM card "MTS"

APN: internet.mts.ru
Username: mts
Password: mts

SIM card "MTS m2m" (Telematics)

This SIM card is used in navigation, monitoring and other systems. "MTS m2m" SIM cards are usually included with equipment purchased along with a connection to the network. The balance of the MTS m2m SIM card is replenished automatically when paying for GPShome.ru services.

APN: m2m.msk
Username: mts
Password: mts

MegaFon / MegaFon Russia (GPRS/EDGE)

Standard Internet connection settings in the MegaFon network. Tariffs from the "Light" series have different settings and are not recommended for use in GPS trackers.

APN: internet
Username: gdata
Password: gdata

Tele2 / Tele2 Russia (GPRS/EDGE)

These APN settings are relevant only for the Russian Tele2 network

APN: internet.tele2.ru

SMARTS / SMARTS Russia (GPRS/EDGE)

The operator works in the Volga region

APN: internet.smarts.ru
Username: not required (leave blank)
Password: not required (leave blank)
You can check whether the "Access to GPRS" service is activated using the USSD command by dialing *109#-call.

BaikalWestCom (GPRS/EDGE)

The operator operates in the Irkutsk region and the Republic of Buryatia (Ulan-Ude)

APN: inet.bwc.ru
Username: bwc
Password: bwc
DNS1: 081.018.113.002
DNS2: 081.018.112.050

Motive - Ekaterinburg Cellular Communications (GPRS/EDGE)

The operator works in Yekaterinburg and the Sverdlovsk region

APN: inet.ycc.ru
Username: motiv
Password: not required (leave blank)

Tatincom ON / Tatincom ON (GPRS/EDGE)

The operator works in Tatarstan

APN: internet.tatincom.ru
Username: tatincom
Password: tatincom

Ukraine

Kyivstar / Kyivstar Ukraine (GPRS/EDGE/3G)

Standard settings

APN GPRS/EDGE: www.kyivstar.net
APN 3G: 3g.kyivstar.net
Username: not required (leave blank)
Password: not required (leave blank)

Prepaid tariff settings

APN GPRS/EDGE: www.ab.kyivstar.net
Username: igrps
Password: internet

DJuice Ukraine (GPRS/EDGE)

APN: www.djuice.com.ua
Username: not required (leave blank)
Password: not required (leave blank)

UMC (MTS UA) Ukraine (GPRS/EDGE)

These APN settings are relevant only for the Ukrainian MTS UA (UMC) network

Standard GPRS/EDGE settings

APN: www.umc.ua (www.mts.com.ua)
Username: not required (leave blank)
Password: not required (leave blank)

HYPER.NET service settings

APN: hyper.net
Username: not required (leave blank)
Password: not required (leave blank)

Beeline / Beeline Ukraine (GPRS/EDGE)

These APN settings are relevant only for the Ukrainian Beeline UA network

APN: internet
Username: not required (leave blank)
Password: not required (leave blank)

Life Ukraine (GPRS/EDGE)

APN: internet
Username: not required (leave blank)
Password: not required (leave blank)

Utel Ukraine (3G)

APN: 3g.utel.ua
Username: not required (leave blank)
Password: not required (leave blank)

Kazakhstan

Beeline Kazakhstan / Beeline Kazakhstan (GPRS/EDGE)

These settings are relevant only for the BeeLine network in Kazakhstan

APN GPRS/EDGE: internet.beeline.kz
Username: not required (leave blank)
Password: not required (leave blank)

Kcell (GPRS/EDGE)

APN GPRS/EDGE: internet
Username: not required (leave blank)
Password: not required (leave blank)

Latvia

Tele2 Latvija (GPRS/EDGE)

These settings are relevant only for subscribers of the Tele2 network in Latvia.

APN GPRS/EDGE: internet.tele2.lv
Username: not required (leave blank)
Password: not required (leave blank)
When automatically setting up an Internet connection in the Tele2 Latvia network, you must check that the Proxy and Port fields are not filled in. If the operator has automatically entered some values ​​into them, you need to delete them, otherwise the Internet will not work.

LMT Latvija (GPRS/EDGE)

These settings are relevant only for LMT network subscribers in Latvia.

APN GPRS/EDGE: internet.lmt.lv
Username: not required (leave blank)
Password: not required (leave blank)

Lithuania

Pildyk / Tele2 Lietuva (GPRS/EDGE)

These settings are relevant only for subscribers of the Pildyk and Tele2 networks in Lithuania.

APN GPRS/EDGE: internet.tele2.lt
Username: not required (leave blank)
Password: not required (leave blank)
When automatically setting up an Internet connection in the Pildyk / Tele2 Lithuania networks, you must check that the Proxy and Port fields are not filled in. If the operator has automatically entered some values ​​into them, you need to delete them, otherwise the Internet will not work.

Belarus

Velcom (GPRS/EDGE)

Tariff plan WEB BASIC

APN GPRS/EDGE: web1.velcome.by
Username: web1
Password: web1

Tariff plan WEB 25

Username: web2
Password: web2

Tariff plan WEB 250

APN GPRS/EDGE: web3.velcome.by
Username: web3
Password: web3

Tariff plans WEB 500, WEB 750, WEB 1500, WEB 3000

APN GPRS/EDGE: vmi.velcome.by
Username: vmi
Password: vmi

Tariff plan WEB PLUS

APN GPRS/EDGE: plus.velcome.by
Username: plus
Password: plus

Tariff plan WEB 25

APN GPRS/EDGE: web2.velcome.by
Username: web2
Password: web2

Azerbaijan

Azercell (GPRS/EDGE)

APN GPRS/EDGE: gprs
Username: user
Password: user

Spain

Vodafone Spain (GPRS/EDGE)

These settings are only relevant for subscribers of the Spanish Vodafone network

APN GPRS/EDGE: ac.vodafone.es
Username: vodafone
Password: vodafone

Moldova

Moldcell (GPRS/EDGE)

APN GPRS/EDGE: internet
Username: not required (leave blank)
Password: not required (leave blank)

Orange Moldova (GPRS/EDGE)

These settings are relevant only for subscribers of the Moldovan Orange network

APN GPRS/EDGE: wap.orange.md
Username: not required (leave blank)
Password: not required (leave blank)

Romania

Vodafone Romania (GPRS/EDGE)

The settings are relevant only for subscribers of the Romanian Vodafone network

APN GPRS/EDGE: internet.connex.ro
Username: internet.connex.ro
Password: connex
If it doesn’t work, add DNS settings (the IP address is determined automatically):
DNS1: 193.230.161.3
DNS2: 193.230.161.4

Türkiye

Turkcell (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: internet
Username: empty (or) gprs
Password: empty (or) gprs

Vodafone Turkey (GSM, GPRS, EDGE, UMTS, HSDPA)

The settings are relevant only for subscribers of the Turkish network Vodafone Telekomunikasyon A.S.

APN GPRS/EDGE: internet
Username: vodafone
Password: vodafone

Avea (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: internet
Username: empty (or) wap
Password: empty (or) wap

TTNET mobil (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: internet
Username: empty
Password: empty

Kartalcell (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: kapsamaktad±r.BlackBerry.net
Username: empty
Password: empty

Muhabbet Kart (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: internet
Username: empty
Password: empty

TrabzonCell (GSM, GPRS, EDGE, UMTS, HSDPA)

APN GPRS/EDGE: internet
Username: empty
Password: empty

Czech

Vodafone Czechia (GPRS/EDGE)

The settings are relevant only for subscribers of the Czech Vodafone network

Prepaid (GPRS/EDGE)

Prepaid tariffs of the Czech Vodafone network
APN GPRS/EDGE: ointernet
Username: not required (leave blank)
Password: not required (leave blank)

Postpaid (GPRS/EDGE)

Postpaid (contract) tariffs of the Czech Vodafone network
APN GPRS/EDGE: internet
Username: not required (leave blank)
Password: not required (leave blank)

If you purchased a YOTA device, you need to make a few simple settings so that the device functions correctly and does not let you down in its work. First of all, the SIM card is activated, but this happens automatically when you turn on the network. We will look at how to correctly make Yota settings for APN on various devices in this material.

It is enough to insert a SIM card into your smartphone or tablet for it to work, and you will see on the screen how data is transferred over the 2G/3G/4G network. It's better to wait a little and then get to work. You need custom yota apn settings so that your smartphone or other mobile communicator functions correctly and you do not experience any problems or interruptions in communication.

The name of the cellular network and the Yota signature will already be displayed on the device screen, meaning that the SIM card has been successfully activated in your phone. There are times when you need to specify an APN access point, which requires a few simple commands.

Video instructions for setting up Yota Internet on iPhone

Setting up apn Yota on Apple iPhone

If you use an Apple smartphone on which the iOS operating system is installed, then to configure Yota apn on the smartphone, select Cellular communications, in it – Cellular data and APN “internet.yota”. There is no need to fill in any other fields; let them remain empty.

Setting up apn Yota for Android

For Android devices, set up the “More” menu section, where you select the mobile network, APN access point that you create or change an existing one - enter the Name “YOTA” and APN “internet.yota”. We don't need any other fields.

Video instructions for setting up apn Yota on Android

Setting up APN for Windows phone

For devices with the Windows Phone operating system, in the settings, select an access point and add internet.yota. After this, the saved parameters are activated.

YOTA's services are provided throughout our country, where Megafon's landline communications and telephony base stations operate. You can read about tariffs for cellular communications and mobile Internet in those published on our website.

YOTA mobile Internet provides good data transfer speeds, but you should not lose sight of external influencing factors that can cause the network to deteriorate. The average data transfer rate over the YOTA Internet varies between 5-20 Mbit/s.

Yota subscribers often wonder what the APN access point settings should look like. It is necessary to understand that the APN parameter is the name of the point that is used by the device to connect to the operator’s GPRS/3G networks, and only if this parameter is specified correctly, Internet access from the device will be available.

In addition, correct entry of the access point data guarantees the correct operation of MMS messages on the gadget and WAP resources. And another important aspect that this configuration affects is the charging of services, since if the APN is entered incorrectly, Internet traffic and other services may be billed incorrectly.

All the factors described above clearly explain how correctly set Internet APN settings on Yota can affect the operation of gadgets, so below we propose to consider information on how to correctly configure a particular gadget.

Correct APN Yota settings on Android

If you are a user of a smartphone or tablet computer that is controlled by the Android operating system, you can set up an access point on your device very quickly. The configuration procedure itself consists of selecting and entering several parameters, as well as their further saving in the system.

In order to enter all the necessary data in the appropriate fields, first, users of Android devices need to go to the appropriate section of their phone, namely, they need to follow the items “Settings”, “Mobile network”, “Access points”, where you need to click on corresponding key to create a new APN point. This button may have different names, depending on the gadget used (“Add point,” “Create point,” “New point”).

• Add the value " internet.yota» into an empty field called “APN”;
• In the “Name” section, enter the company name in upper case (“ YOTA»);
• The APN type parameter must be default, suppl.

In the menu for creating a new access point, there will also be additional fields that you do not need to pay attention to - they must be left blank. You do not need to use quotation marks when entering new parameters. To record the changes made, click on the “Save” button.

After making changes, reboot your Android device.

APN Yota settings on iPhone and iPad

As you know, today the Yota operator is the company that is perhaps the most actively used by subscribers who want to use high-speed 3G/4G Internet from tablet computers. That is why the company’s clients often install SIM cards in their Apple iPads. And if suddenly the APN settings are not installed into the system automatically, you can configure the Apple device manually with about the same ease as for Android devices.

You can create an access point in the iOS operating system, which runs both iPad and iPhone, in the settings menu by going to the sections “More”, “Mobile network” “APN points”

As for the parameters that need to be specified in the section for creating an access point on an iPad or iPhone, in the case of Apple equipment there are fewer of them than when setting up Android devices - users only need write “internet.yota” for the APN access point. All other fields present in the section are left empty, and the changed settings are saved. Please note that you do not need to use quotation marks when entering parameters.

Video instructions for setting up Yota Internet on iPhone