Why the laptop is slow: the main reasons, programs that slow it down, and ways to solve the problem. The laptop is running very slowly, what should I do? The laptop takes a long time to load when turned on.

What to do if the laptop takes a long time to turn on?- possible problems with the laptop if it starts to turn on for a long time and runs slowly, as well as ways to solve them.

Why does my laptop take so long to turn on?

Many users note that several months after purchasing or reinstalling the system, the laptop began to take a long time to turn on. There may be several reasons for this. Some of them can be easily eliminated by the user himself, while others require the intervention of a specialist. Let's consider the main factors that could negatively affect the speed of your equipment.

So, if the laptop takes a very long time to turn on, then the options are as follows:

The laptop is infected with viruses. Viruses are the most common cause of not only slow loading, but also slow operation of equipment in general.
There are a large number of programs on startup. Pay attention to the lower right corner of your screen. All running programs and applications that start automatically when you turn on the laptop are displayed there. To remove unnecessary programs, just press Win+R, then enter the command “msconfig” (without quotes), open the Startup tab and uncheck unnecessary programs.
There are too many software bugs on the laptop. During work, a lot of unnecessary files may be stored in memory, which are a consequence of the operation of certain programs. Program “bits” also accumulate if you do not completely remove them.
Cooling problems. Another answer to the question “why does it take a long time for the laptop to turn on?” - this is a problem with the cooler. This problem refers to hardware problems and occurs if your laptop is many years old.
Problems with laptop hard drive. The hard drive can suffer both from external influences (impacts on the laptop, dropping the laptop, etc.), and, for example, from the fact that the laptop is turned off incorrectly (by long pressing the power button, instead of turning off the computer correctly by shutting down).

Laptop takes a long time to turn on: how to solve the problem

Check your laptop with an antivirus program. This will reveal the presence and location of viruses. After checking, the program will automatically offer you options for further actions.
If the laptop takes a long time to turn on, then you need to remove unnecessary programs from startup. Here you can go in two ways: using the system configuration or using special utilities such as CCleaner. Using the utility, this is somewhat easier to do: click on the “Startup Manager” tab and uncheck unnecessary boxes.
Removing programs from a laptop is also much easier using similar utilities, since they automatically delete not only the files of the selected program, but also all its “remnants” in the registry. If your laptop takes too long to turn on, you can also defragment the hard drive.
As for cleaning the cooler, there will be no clear instructions, since its location may differ depending on the laptop model. If you have never encountered such a problem before, it is best to contact a specialist.
Changing a hard drive is usually quite simple - you just need to determine its location and unscrew a few screws, and then replace the hard drive itself. However, very often the laptop's hard drive can be "hidden" under the laptop's keyboard or located under the motherboard, as in many Dell models (in this case, you have to disassemble the laptop to its very core).

We hope this article helped a little the average user who needed to find out why his laptop took a long time to turn on.

And remember: armed with knowledge about the malfunction of your laptop, not a single service center will be able to mislead you and charge you an additional fee for services that are not required. Be carefull!

The problem with the computer taking a long time to turn on is quite common and has different symptoms. This can be either a freeze at the stage of displaying the logo of the motherboard manufacturer, or various delays already at the start of the system itself - a black screen, a long process on the loading screen, and other similar troubles. In this article, we will understand the reasons for this PC behavior and consider ways to eliminate them.

All reasons for long delays when starting a computer can be divided into those caused by software errors or conflicts and those that arise due to incorrect operation of physical devices. In most cases, it is the software that is to blame - drivers, startup applications, updates, and BIOS firmware. Less often, problems arise due to faulty or incompatible devices - disks, including external ones, flash drives and peripherals.

Reason 1: BIOS

“Brakes” at this stage indicate that the motherboard BIOS takes a long time to poll and initialize the devices connected to the computer, mainly hard drives. This happens due to lack of device support in the code or incorrect settings.

Example 1:

You installed a new disk into the system, after which the PC began to boot much longer, moreover, at the POST stage or after the motherboard logo appeared. This may indicate that the BIOS is unable to detect device settings. The download will still occur, but after the time required for polling has elapsed.

In this case, there is only one way out - update the BIOS firmware.

Example 2:

You bought a used motherboard. In this case, a problem may arise related to the BIOS settings. If the previous user changed the settings for his system, for example, configured combining disks into a RAID array, then there will be long delays at startup for the same reason - a long poll and attempts to search for missing devices.

The solution is to restore the BIOS settings to the “factory” state.

Reason 2: Drivers

The next “big” boot stage is launching device drivers. If they are out of date, significant delays may occur. This is especially true for software for important components, such as the chipset. The solution to the problem is to update all drivers on your computer. It is most convenient to use a special program such as DriverPack Solution, but you can also use system tools.

One of the factors influencing the speed of system startup is programs configured to autoload when the OS starts. Their number and features affect the time required to move from the lock screen to the desktop. Such programs include drivers of virtual devices - disks, adapters and others installed by emulator programs, for example, Daemon Tools Lite.

To speed up system startup, at this stage you need to check which applications and services are included in startup, and remove or disable unnecessary ones. There are other aspects that are worth paying attention to.

As for virtual disks and drives, you need to leave only those that you often use or turn them on only when necessary.

When we talk about lazy loading, we mean a setting in which programs that are mandatory, from the user’s point of view, to start automatically start a little later than the system itself. By default, Windows launches all applications at once whose shortcuts are located in the Startup folder or whose keys are registered in a special registry section. This creates increased resource consumption and long wait times.

There is one trick that will allow you to first fully deploy the system, and only then launch the necessary software. Will help us realize our plans "Task Scheduler", built into Windows.

Before setting up lazy loading for any program, you must first remove it from startup (see articles on loading acceleration at the links above).
We launch the scheduler by entering the command in the line "Run" (Win+R).

It can also be found in the section "Administration" "Control Panels".
In order to always have quick access to the tasks that we will now create, it is better to place them in a separate folder. To do this, click on the section "Task Scheduler Library" and select the item on the right "Create a folder".

We give a name, for example, "AutoStart" and press OK.
Click to go to a new folder and create a simple task.
We give the task a name and, if desired, come up with a description. Click "Further".
In the next window, switch to the parameter "When you log on to Windows".
Leave the default value here.
Click "Review" and find the executable file of the desired program. After opening, click "Further".
In the last window, check the parameters and click "Ready".
Double-click on the task in the list.
In the properties window that opens, go to the tab "Triggers" and, in turn, double-click to open the editor.
Place a checkbox next to the item "Save for" and select the interval in the drop-down list. The choice is small, but there is a way to change the value to your own by directly editing the task file, which we will talk about later.
14. Buttons OK close all windows.

In order to be able to edit a task file, you must first export it from the scheduler.

Select a task in the list and press the button "Export".
The file name does not need to be changed, you just need to select a location on the disk and click "Save".
Open the resulting document in the Notepad++ editor (not an ordinary notepad, this is important) and find the line in the code
PT15M

Where 15M– this is the delay interval we have chosen in minutes. Now you can set any integer value.
Another important aspect is that, by default, programs launched in this way are assigned low priority for accessing processor resources. In the context of this document, the parameter can take a value from 0 before 10 , Where 0 – real-time priority, that is, the highest, and 10 - the lowest. "Scheduler" writes the value 7 . Line of code:
7

If the program being launched is not very demanding on system resources, for example, various information utilities, panels and consoles for managing the parameters of other applications, translators and other software running in the background, then you can leave the default value. If this is a browser or other powerful program that actively works with disk space, requiring significant space in RAM and a lot of processor time, then it is necessary to increase its priority from 6 before 4 . It is not worth higher, as malfunctions in the operation of the operating system may occur.
Save the document using a keyboard shortcut CTRL+S and close the editor.
Removing a task from "Planner".
Now click on the item "Import task", find our file and click "Open".
A properties window will automatically open where you can check whether the interval we specified is preserved. You can do this on the same tab. "Triggers"(see above).

Reason 4: Updates

Very often, due to natural laziness or lack of time, we ignore offers from programs and the OS to reboot after updating versions or implementing any actions. When the system is restarted, files, registry keys and settings are rewritten. If there are many such operations in the queue, that is, we have refused to reboot many times, then the next time you turn on the computer, Windows may “think” for a long time. In some cases even for a few minutes. If you lose patience and force a restart of the system, this process will begin again.

There is only one solution: patiently wait for the desktop to load. To check, you need to reboot again and, if the situation repeats, you should move on to searching for and eliminating other causes.

Reason 5: "Iron"

Lack of computer hardware resources can also negatively affect its startup time. First of all, this is the amount of RAM into which the necessary data is loaded during loading. If there is little space, then there is active interaction with the hard drive. The latter, as the slowest PC node, slows down the system start even more.

The solution is to install additional memory modules.

Have you started to notice that your laptop is running very slowly? Many users encounter a similar problem, which is often annoying and infuriating. Don't waste your time, return your device to its former performance with the help of our tips. Read below why the laptop is slow, takes a long time to load everything, and how to deal with it.

1. Dust accumulation

If your laptop has an air cooling system and has been in use for more than a year, you should think about preventative cleaning of dust from the internal components. The fact is that over time, the radiator grilles and cooling system elements become covered with a layer of dust. This, in turn, leads to overheating of the laptop, as well as system slowdowns and freezes. Read how to clean your laptop from dust.

2. Overloaded startup

The longer and more actively the device is used, various programs are installed, the more applications end up in startup. It seems like nothing bad, but over time the laptop’s system resources are not enough to launch all programs and services quickly enough. The situation is further aggravated by the fact that some of these applications are rarely used and are often not needed at all. To optimize startup, do the following:

3. Virus infection

The presence of malicious software often provokes a situation where the laptop runs slowly. If you actively use the Internet, download programs from various sources, and do not have a good anti-virus program installed on your device, then sooner or later you will become infected with a virus. Sometimes it is difficult to immediately notice that viruses have appeared on the laptop, but if the laptop suddenly starts working slowly, this is a sign of a possible infection. Read how to fight malware.

4. Increased fragmentation of the hard drive

If your device uses an HDD, then over time the information stored on it becomes fragmented, which slows down the system when working with data. To avoid this, it is recommended to periodically check the condition of the hard drive and defragment it. To analyze the disk and run defragmentation, do the following:

5. Incorrect power settings

There are several operating modes for laptops:

energy saving – used when operating on battery power, characterized by low system performance, low screen brightness, etc.;
balanced – a balance is maintained between performance and energy consumption;
high performance – characterized by increased microprocessor operating frequency, bright display, etc.

When you plug in the power cord, make sure the system automatically switches to either Balanced or High Performance mode. After all, if the power saving mode is set, the laptop will work much slower.

6. The laptop does not meet modern requirements

Time does not stand still, and therefore more demanding programs, games and versions of operating systems appear every year. If your laptop is many years old, perhaps the reason for its slow operation is the technical characteristics of the device, which are weak by modern standards. To solve the problem, you need to either upgrade the system or purchase a new, more powerful laptop.

102 964 Tags:

Optimize your computer startup

You may still remember a time when your computer took just a few seconds to start up. Now those happy days are long gone and your computer takes forever to boot. Why is this happening? There may be several reasons for a slow start, but most likely it's because when Windows starts, it loads too many programs and processes that are running in the background. They not only increase the startup time of your computer, but also slow down your computer when performing various tasks after the computer boots.

Remove unnecessary stuff

If you have a new branded laptop, then the manufacturers probably installed a lot of unnecessary programs on it that are loaded every time you turn it on. Thus, laptop manufacturers, in agreement with software manufacturers, advertise their products. Frankly speaking, these programs are what make your computer take longer to boot, and they are not needed right away when you start your computer. Or it may not be needed at all during the entire work session. And the more software you subsequently install, the more programs are automatically added to your startup list. The more of them, the more RAM and processor resources are required to run Windows. This is why your laptop starts to boot slower after turning it on. It will also work slower later, consuming more system resources. Moreover, it consumes battery power faster if the laptop is running in offline mode. In addition, when the laptop is running on battery power, we get a double negative effect. From a large number of programs running in the background. Firstly, your laptop runs slower, so you also do your work slower and may not have time to complete it before the battery charge is completely used up. Secondly, a large number of running programs use system resources more intensively, which again leads to faster consumption of the laptop battery. One solution is to look through the startup list and disable unnecessary programs, which will most likely be the majority. But before you do this, you need to understand which programs automatically start running when Windows starts.

When you turn on your computer, Windows must load a whole set of system files, without which it cannot work. However, there are many other programs that install themselves into the startup folder. These can be any application, from Google Update to Skype and Windows Live Messenger. Adobe programs are also famous for their ability to launch by default when you turn on your computer. If you don't know which programs start at startup, there's an easy way to find them:

1. Right-click on the taskbar and select

2. When the window opens Task Manager, go to the tab Processes

Now you can see all the processes happening on your system and how much resources each of them is consuming. Typically, you will find several processes associated with utilities that check for program updates, or help software start up faster. In fact, you don't need to keep these programs running all the time, and you can disable them without risk to your system.

Programs that are unnecessary at startup can be easily dealt with using the system configuration utility. This is done like this:

1. Click on the button Start (for Windows XP), Execute or Search programs and files(for Windows 7)

2. Type msconfig in the line that appears and press Enter. This will launch the System Configuration Utility

3. Go to the tab Start. You will see a list of programs that load when Windows starts

4. Now go through the list and deselect programs that you don't want to start automatically.

Be careful and do not disable all programs in a row. If you don't know what a program does, it's best to leave it alone, or at least Google the definition of the program before disabling it.

5. Click Apply and then click OK

6. Restart Windows so that the changes take effect.

However, you'll notice that the system configuration utility (msconfig) doesn't give much information about the programs in the list. This makes it difficult for you to determine which programs can be disabled, because disabling programs that are necessary for the system to function is potentially dangerous. Therefore, if you want to know exactly what you are disabling, it is best to use a third-party startup management utility. High-quality startup managers such as the program provide detailed information about each program, so it will be easy for you to decide which ones you can disable.

After you install this program and run it, go to the tab Optimization. Click the menu and the startup list will open in front of you.

After you select any program by clicking on it. Then a link will appear at the bottom of the program window

By clicking on this link you will be taken to the page of the program manufacturer's website, where the user community and technical experts share opinions on whether it makes sense to remove the program you have selected from the startup list. Unfortunately, according to the rules set by the manufacturers of Glary Utilities, users can only leave comments in English.

So, if the laptop takes a very long time to turn on, then the options are as follows:

The laptop is infected with viruses. Viruses are the most common cause of not only slow loading, but also slow operation of equipment in general.
There are a large number of programs on startup. Pay attention to the lower right corner of your screen. All running programs and applications that start automatically when you turn on the laptop are displayed there. To remove unnecessary programs, just press Win+R, then enter the command “msconfig” (without quotes), open the Startup tab and uncheck unnecessary programs.
There are too many software bugs on the laptop. During work, a lot of unnecessary files may be stored in memory, which are a consequence of the operation of certain programs. Program “bits” also accumulate if you do not completely remove them.
Cooling problems. Another answer to the question “why does it take a long time for the laptop to turn on?” - this is a problem with the cooler. This problem refers to hardware problems and occurs if your laptop is many years old.
Problems with laptop hard drive. The hard drive can suffer both from external influences (impacts on the laptop, dropping the laptop, etc.), and, for example, from the fact that the laptop is turned off incorrectly (by long pressing the power button, instead of turning off the computer correctly by shutting down).

Laptop takes a long time to turn on: how to solve the problem

Check your laptop with an antivirus program. This will reveal the presence and location of viruses. After checking, the program will automatically offer you options for further actions.
If the laptop takes a long time to turn on, then you need to remove unnecessary programs from startup. Here you can go in two ways: using the system configuration or using special utilities such as CCleaner. Using the utility, this is somewhat easier to do: click on the “Startup Manager” tab and uncheck unnecessary boxes.
Removing programs from a laptop is also much easier using similar utilities, since they automatically delete not only the files of the selected program, but also all its “remnants” in the registry. If your laptop takes too long to turn on, you can also defragment the hard drive.
As for cleaning the cooler, there will be no clear instructions, since its location may differ depending on the laptop model. If you have never encountered such a problem before, it is best to contact a specialist.
Changing a hard drive is usually quite simple - you just need to determine its location and unscrew a few screws, and then replace the hard drive itself. However, very often the laptop's hard drive can be "hidden" under the laptop's keyboard or located under the motherboard, as in many Dell models (in this case, you have to disassemble the laptop to its very core).

We hope this article helped a little the average user who needed to find out why his laptop took a long time to turn on.

If you need high-quality and accurate diagnostics or consultation, call us, we will help! (812)