Apple Watch is the first smartwatch on the global market. Having developed and improved the iPhone, the "apple" company invented a unique device that can work in sync with it. The two gadgets presented not only excellent battery life, but also a great addition to each other.

The developers of the latest operating system have fixed all the flaws. There were isolated cases when the clock was frozen, similar to a PC. This is due to heavy use, which puts excessive stress on the device. The article discusses in detail the question of how to restart Apple Watch. It also states the conditions for a correct and safe procedure.

To restore work, sometimes it is enough to turn on standby mode. After unlocking the screen, the operation will return to normal.

You can control the watch with keys, gestures and a sensor. There are three ways to unlock your Apple Watch:

• Click on "Power"
• Make a "watch time" gesture
• Place your finger on the screen

If the watch does not start, try charging it.

There are 3 solutions for freezing completely:

• Normal shutdown
• Factory reset Apple

A warning! Resetting may cause malfunction. This action is not recommended. The usual option is the first method, the last resort - the second.

Standard shutdown

If your Apple watch is frozen, try turning off your watch in the normal way. It implies the following actions:

1. Hold down the "Power" key;
2. Hold it for 2-3 seconds;

Note! These actions call up the menu of the shutdown, blocking and economy modes.

1. Click on the shutdown command;
2. Wait for the logo to be displayed.

Are you the proud owner of a modern gadget, but don't know how to turn on your Apple Watch? Then this information is just for you!

Turning on iWatch

Before you turn on your purchase for the very first time, you must put the watch on charge and leave it alone for a couple of hours so that it is fully charged. After all, this will serve as a guarantee of long-term battery life.

The first acquaintance with a smartwatch is quite an exciting moment. Turning on the Apple Watch for the first time may disappoint some gadget lovers of the legendary company. This is due to the fact that the time allotted for launching the device is just over one minute.

Such a slow speed is a nuance that can be taken lightly, since such a miracle of technology is the first of its kind among Apple products. Exactly the first start of the smartwatch is 1 minute and 10 seconds.

It is necessary to understand that such a small device, which is the firstborn of its generation, could not fit powerful iron. Moreover, only the first launch of the gadget takes such time, and for ordinary users in the future this moment will be reduced to "no".

How to start iWatch?

After unpacking the watch and visual inspection, it should be activated, i.e.

• the power button is located on the right of the gadget under the round button;
• after pressing it, a characteristic Apple icon will be displayed on the screen;
• moreover, the image will be dim at first, this should not be scared;
• Do not press anything until the gadget prompts you to select a language.

Photo: Language selection on Apple Watch

After 1 minute and 10 seconds, you can proceed to (5th or newer model).

Pairing iWatch and iPhone

First, make sure that both devices are turned on, the phone is active:

• Internet (mobile or).

Devices should be located close to each other. You need to open the iWatch app on your phone.

Turning on the Apple Watch for the first time activates synchronization between devices, so the “Create a pair” request will appear on the watch screen and, having responded positively to it, the same manipulations should be carried out on the smartphone.

Then the camera of the phone is directed to the screen of the device, a few seconds of animation - and the pair is created. When wondering how to turn on Apple Watch for the first time, you need to know the following points that arise when synchronizing with a smartphone:

• the screen will display a request to select a hand on which the Smart Clock will be worn;
• then you enter your Apple ID password. "Activation lock" will be displayed if the service "" is installed on the phone;
• everything done on the smartphone will be automatically transferred to the watch. Therefore, it is recommended to double-check them;
• then it is created, which can consist of either four digits (short password) or more (long password). You should decide on such a setting as a phone or vice versa;
• Synchronize Apps: By clicking "Later", only messages, mail and contacts can be synchronized.

The whole process does not take long.

Why won't iWatch smartwatch turn on?

Frequent problem of not turning on iWatch

What to do if Apple Watch won't turn on? There may be several reasons for this, the most common is a dead battery. To rule out another problem:

1. Connect the device to charging.
2. Try turning it on by pressing and holding the side keys.
3. In the event that the problem is really with the battery, let the battery charge fully, and then use the watch.

If after the actions taken, iWatch does not turn on, perhaps the reason lies in the "glitch" of the system. Then a reboot is required. Although this wrist accessory is quite small, it is a mini-computer and, like any system, can sometimes malfunction.

How do I turn on Apple Watch?

To reload them, you need to simultaneously press the side button and the Digital Crown for ten seconds. Do not worry, this operation will not result in loss of settings and data.

Let's take a look at other issues that may cause your iWatch to not turn on.

Other problems not turning on iWatch

The clock could stop turning on for various reasons. You can try to solve this problem on your own. You can easily troubleshoot simple faults. Most likely, the clock does not start due to:

1. Breakdown of the physical power button.
2. Software crash, freeze.
3. Damage to the watch as a result of physical impact (falling, impact).
4. Water ingress into the watch.
5. Broken Apple Watch battery.

How to solve the problem?

The most effective ways to fix the problem:

• contact an Apple technical support consultant;
• take your watch to their support center.

As already mentioned, the clock can be easily discharged. Charge them before doing anything. Check:

1. Charger status.
2. Is the power adapter plugged into a power outlet?
3. Is the cable coming off.
4. Are the watch connector and charger dirty?
5. Try charging with a different cable and adapter.

Some easy troubleshooting steps

Some simple troubleshooting steps are listed below:

1. Dry your Apple Watch.
2. Replace the charger.
3. Perform a forced restart of the gadget (it is performed by simultaneously pressing and holding the side button and the Digital Crown for ten seconds).

If after performing a forced reboot appears the logo in the form of "Apple" - the device is working.

Instead of a conclusion

Turning on Apple Watch can be difficult if the battery is dead and the charger is damaged. When charging the accessory, make sure that the cord and the unit are normal.

In the event that this did not help to start the Apple Watch system, then, most likely, this is a technical breakdown. Do not try to disassemble the gadget yourself. It is better to contact the nearest service center, where the master will unambiguously determine the reason why your accessory does not turn on.

The Apple Watch has a weak battery - this is its main disadvantage. The rechargeable battery only lasts for a day of uniform use. But sometimes Apple Watch stops charging altogether, so you need to know what measures you can take in this case.

How to know if the charging process is in progress

When the charging cable is connected to Apple Watch, a green icon should be displayed. If the screen does not turn on, you should leave the watch on charge for about half an hour.

Photo: Apple Watch charging indicator

What to do if Apple Watch won't charge: instructions

If the watch does not charge, never disassemble it. Better follow these instructions:

1. Make sure the magnetic charger for Apple Watch is working: is it plugged into a power outlet.
2. Use the original power adapter and charging cable — the same one that came with your Apple Watch.
3. Remember to remove the protective film from all sides of the magnetic mount.
4. Wipe the back of the watch and charger.
5. Place the watch face up on the charger, the magnets align and the Apple Watch starts charging.
6. If the charging process has not started, you need to make a forced reboot.

How to perform a forced reboot

You can only force restart your Apple Watch in exceptional cases. To do this, press and hold the side button together with the wheel for ten seconds. If the Apple logo lights up, then everything is done correctly.

If these instructions did not help you, contact Apple technical support, and they will definitely help you figure out why the Apple Watch does not turn on and does not charge.

If your Apple Watch won't turn on and won't respond to button presses, try solving the problem yourself. With the instructions and the tools you need, you can quickly fix simple faults. You can find out why the device does not turn on, check the integrity of the control board and the reliability of the contacts, even without special skills.

Most of the time, Apple Watch fails for the following reasons:

• the power button is broken
• moisture has entered the protective case
• clock stuck after an update or as a result of a software crash
• due to mechanical damage, the watch display was damaged

A common reason Apple Watch won't turn on is when the battery is drained or damaged. In this case, it is necessary to recharge or replace the battery. Hold the button on the side of the device and the Digital Crown to restart the watch until the Apple icon, Apple's signature icon, lights up.

Why does the device not start

If your Apple Watch suddenly stops turning on, the problem might be due to a setting issue. Pay close attention to the notifications that appear on the screen of Apple technology. In them, the developers describe the problems and give options for their elimination. If your Apple Watch is running low, connect it to the charger and wait for the company logo to appear.

If your Apple Watch stops turning on or responding to the charging connection, you can remedy the situation in the following ways:

• check the depth of insertion of the cable into the socket and the adapter into the socket
• remove the protective film from the charger
• clean the device from dirt and dust
• restart the device (press the side button)

How to quickly reboot an electronic device

You can also check that the charging is working properly. If the Watch icon is on, Apple should be charging automatically. Press the button on the side of the watch and press the Digital Crown to restart your Apple device and make sure your installed apps are working properly.

A common reason Apple Watch won't turn on is when Power Saver is running. In this case, pressing the screen will not start the clock.

What you need to know before proceeding with device recovery

To turn on your Apple Watch, press the power button, located on the right side of your device. In doing so, you will notice that the "apple" is on fire. The download duration is determined by the Apple device model and is usually about a minute.

The iWatch device belongs to the category of mini-computers, the installed applications on which must be periodically updated. Apple Watch users find their devices run faster after a software update. If you want to put Apple Watch into battery saving mode, hold the button on the right side of the device until the Eco Mode slider appears.

No messages on the display

Apple Watch is unable to function after being discharged. The clock display on which notifications appear is consuming a significant amount of power. A common reason why no alerts appear on a device is when the watch is locked or when Do Not Disturb is activated. You can solve the problem in the following ways:

• remove the passcode that prevents Apple Watch from turning on and the watch display is locked
• make sure that the settings for Apple technology are correct

Easy ways to fix devices

If you want to check if the charger is working properly, try restarting your watch. To do this, hold down the Side Button and Digital Crown for 10 seconds. In the event that the charge icon is not visible, leave the Apple device plugged in to a rechargeable appliance for several hours.

Simple ways to repair smartwatches that turn off spontaneously:

• drying devices
• charge replacement
• configuring the parameters of Apple technology

Difficult troubleshooting options

If your Apple Watch stops turning on and can't diagnose the problem right away, the damage could be serious. The malfunction may be associated with the failure of the button responsible for turning on the device, the malfunction of the microcircuit, or other reasons.

To determine the cause of the malfunction, you will need special equipment and tools. With their help, you can perform the following repair operations:

• remove and replace the button responsible for turning on the Apple device
• update the software if the clock freezes or turns off spontaneously
• Repair Apple Watch Power Chip
• replace the charger connector

Apple Watch users often experience such problems - after discharging, the watch freezes or turns off. To force a restart, press the side button and the Digital Crown at the same time. If, after rebooting, the watch turns on, but you do not see that the "apple" is on, or a notification appears with a red exclamation mark, this means that the device cannot be used due to a breakdown of the microcircuit or other parts.

An effective method for solving device problems

If your Apple Watch won't turn on and you need professional help, contact YouDo. Experts will quickly and inexpensively find out the reason why the device does not turn on, the clock is frozen, or the power button has stopped functioning.

Collaboration with Yudu performers provides the following benefits:

• provision of services with departure at any specified address
• replacement of parts with original components
• round the clock
• experience in servicing all models of iWatch devices

Leave a request on this page, describing your problem (for example, "the Watch logo is on, Apple is not charging"). Experienced performers can help you inexpensively any day of the week if your Apple Watch won't turn on at all.

They say that even the new Apple Watch's numerous sensors do not always work correctly. Because of this, the corresponding mobile applications start to get confused quite often.

For example, it happens that “Activity” suddenly turns on: it counts either steps, then distances, or it doesn’t count anything, or it doesn’t display the rings. In general, it starts to freak out unpleasantly.

If the preliminary diagnosis is confirmed, and the sensors really do not want to work properly, then the smart watch, respectively, must be replaced or repaired. But, unfortunately, not everything is so simple. It also happens that (well, in fact, according to the law of meanness) in the hands of the master of the Apple Watch function as it should, but if you bring them home later, the glitches return. What to do?

Of course, in case of any software troubles, you need to start with a "soft reset" Apple Watch (Settings -> General -> Reset). If it does not help at all, then you can apply a more abrupt measure. Yes, a medical hard reset Apple Watch ... Well, if necessary, then it is necessary.

How to hard reset Apple Watch?

This means that a hard reset Apple Watch (aka "full reset", aka "hard reset", aka "hard reboot", aka "return to factory settings", etc.), as you know, provides for a complete reboot of the operating system of the device , but without deleting personal data and settings.

Hard reset Apple Watch, like any mobile device and not only Apple, is recommended to be carried out regularly, and in the case when there are obvious problems in the operation of the device (hangs, slows down, glitches, etc.), this operation is simply necessary.

So, in order to "hard" overload the smart watch, i.e. make a hard reset Apple Watch:

• we take the watch in our hands so that we can freely reach the Home button ("crown") and the side button with our fingers;

• then simultaneously press both of these buttons and hold the press for 10 seconds until the watch screen turns off and the operating system reboot procedure begins;

• that's all!