How to charge with an uncertified cable. Important This cable or accessory is not certified or supported, what should I do? Not original cable

IOS is a controversial platform that causes a lot of controversy due to its closed nature and loyalty to the foundations of Apple. One thing cannot be taken away from the system for sure: strict adherence to the standards set by the developer and the protection of the user. Actually, protection sometimes becomes the subject of controversy. Recently, many users have faced a massive problem, the error “this accessory is probably not supported”. Due to the reasons for its occurrence, it often raises questions from a certain category of users.

This is not a critical failure, you shouldn't panic. To begin with, you need to figure out what kind of error it is and where it came from. Its roots date back to iOS 7, when engineers from Cupertino began battling unofficial cables for their phones. In those days, the message “this accessory is probably not supported” was already popping up, but the accessories worked. In iOS 9, this feature was changed so that the unsupported device is no longer functional.

The problem is widespread among the new cables with a Lightning port, and they fell victim to the message "This accessory is probably not supported." The iPhone 5 was one of the first to receive complaints about this.

The question arises, is this fight against unofficial cables really necessary? Yes, it is necessary, there were many cases when due to a poor-quality wire the batteries were damaged, the smartphones themselves were destroyed. There are also human casualties. It is impossible to fight scammers by other methods, even on the huge Amazon marketplace, thousands of counterfeits are sold (often on behalf of Apple).

Reasons for the error: lack of MFi support

In connection with the increasing incidence of substandard accessories that negatively affect the user experience and harm iPhone owners, Apple has introduced a certification system for accessories. In general, the lack of a “signature” from Apple is the main reason for the message “this accessory is probably not supported”. The iPhone automatically checks the certification and turns off the gadget in case of any inconsistencies. In order to avoid an error, you need to purchase accessories developed by Apple itself or its partners (the Made for iPhone label is installed on these).

Cause of the error: damage to the accessory

There is another set of circumstances that can lead to the appearance of the message "this accessory is probably not supported", namely, the integrity of the wire or port. Moreover, even the official cable will not hide from such protection. Even the slightest damage to the insulation can be considered critical by the phone, and that, in turn, will prevent it from functioning. That is why braided cables (titanium or hard rubber) are so popular.

Solving the problem using "Jailbreak"

The problem with unofficial iPhone cables is not a problem at all for those who own a jailbroken gadget. In order to deceive the system, you need to use a tweak called "Activator of uncertified Lightning cables" (the author, like the exact name, can be found on the Internet). The tweak is activated as follows:

Jailbreak is being implemented (if it has not been installed yet).
Cydia launches.
Next, go to the Source submenu.
Add parrotgeek.net/repo as a repository.
Find and install a tweak.
Reload the gadget.

In the future, the message “this accessory may not be supported” will no longer annoy the owner of the device. In this case, only the owner of the smartphone bears further responsibility and automatically loses any warranty.

Solving the problem without "Jailbreak"

No matter how obvious and trite it may sound, the simplest and safest method is to buy a new, official or certified cable (or other accessory). If for some reason this cannot be done and the device has not been jailbroken, you can try to bypass the verification system.

For example, turn the cable over. It may happen that some of the contacts on one side of the cable are damaged, which is why it refuses to work. On the other side, the contacts may turn out to be quite working, which means that the lace will serve for another couple of days or hours. This problem often occurs with Chinese wires, which burn out on the very first day.

You can also turn off the gadget. This applies to chargers. In the off state, the power controller in the iPhone continues to supply current to the battery and charge it, but the operating system does not function, which means that there is no one to check the integrity of the wire and whether it has certification, therefore the smartphone will be charged.

If all this does not help and it seems that the problem is not at all in the cable, you can try to clean the port of dust and fine dirt. It so happens that dirt in the inner part of the port causes problems in working with the cable pins.

These little tricks, of course, help solve the problem, and the annoying error that the iPhone gives out: "This accessory is probably not supported" - will no longer be an eyesore. But the risks are great, no one can guarantee that a damaged or unofficial cable will not ditch the battery, so first you should think carefully about getting an official one.

Some people complain that when charging or syncing with iTunes, a message appears on the smartphone screen stating that "this cable or accessory is not supported or certified." At the same time, the device does not charge or sync, it is also impossible to restore or update the gadget. Why do Apple smartphones and tablets “dislike” some USB cables and what can be done about it?
SpoilerTarget "> This cable or accessory is not certified

These messages first appeared in iOS 7 on iPhone 5 - "This accessory is probably not supported." On iOS 8 and later, the content of the message was slightly changed - "This cable or accessory is not certified, therefore, its reliability with this iPhone is not guaranteed." There are several reasons:
You are using a non-original and non-certified USB cable.
The Lightning connector looks simple only from the outside; a microcircuit with 4 microchips is hidden under its shell. We do not fully know how they work and what the specific one is intended for, but it is reliably known that this controller:
Switches the contacts to which the iPhone is connected - the Lightning connector is reversible and plugs into the connector either side.

Responsible for the secure transfer of information between the device and the computer when syncing with iTunes, restoring and updating iOS.

3. Limits voltage and current when charging the device.
SpoilerTarget "> What Lightning looks like under the shell

Yes, the original Lightning cable is too expensive, for example, in the Russian App Store they ask 1590 rubles for it. And this is for 1 meter of wire and two connectors, one of which is the simplest (USB).
SpoilerTarget "> Appearance of the original Lightning cable

In defense of user interests, manufacturers of accessories came forward and offered analogs. However, "cable to cable is different" and in pursuit of the lowest cost price, some manufacturers (mainly Chinese) "forget" to add the necessary microchips to the Lightning connectors so that they at least match ... What is this license?
SpoilerTarget "> What does a non-original Lightning cable look like under the shell

MFi (short for "Made for iPhone / iPod / iPad" - Made for iPod / iPhone / iPad) is Apple's licensing program for manufacturers of accessories compatible with iPhone, iPod Touch and iPad.
“Made for iPod / iPhone / iPad” indicates that this cable or accessory has been specifically designed to connect to an iPod, iPhone or iPad and has been certified by the developer to meet Apple performance standards. .
Apple vouches for certified cables and accessories, for which it receives the corresponding monetary royalties from each unit, which means they are safe for your device (in theory).
In addition to the price, the original Apple USB cables have serious durability problems: they quickly fray and break.
So, in order for your iPhone, iPod Touch and iPad to charge at acceptable voltage and current, and also sync without errors, use at least a certified Lightning cable. It is cheaper than the original one. But, if you do not have such an opportunity, there is a way how to protect Apple and charge, sync and restore iPhone using the cheapest cables.
SpoilerTarget "> The cable is not certified
"The cable is not certified." What to do?
In some cases, it is enough:
Sometimes you need this:

For jailbroken devices in Cydia, find and install the "Support Unsupported Accessories 8" or "Unauthorized Lightning Cable Enabler" tweak.

Therefore, it is strongly recommended to use either the original accessory, or certified, for example, Please, or to view the hidden text anyone with an iPhone 5 or later can afford).

SpoilerTarget "> Damaged USB cable
2.USB cable is damaged
There are times when the warning “This cable or accessory is not certified, therefore, its reliability with this iPhone is not guaranteed” appears when the original cable is connected.
If you are definitely using the original cable, and the ill-fated message still appears on the screen, your cable may simply be damaged.

If there are no visible signs of damage, take a knowingly intact (and, of course, original) cable for verification and check the operation of your device with it. If it works, change the cable to a new one.

SpoilerTarget "> Clogged connector
3. Plugged connector
The bottom line is that various debris gets into the connector on the iPhone or iPad (this is especially true for Lightning connectors) and accumulates there for a long time. At some point, the debris becomes so much that it breaks the contact of the cable in the connector - and, accordingly, a corresponding warning appears. The solution is to gently clean the debris from the connector. To do this, you can use a toothpick or cotton swab moistened with alcohol. I advise you to clean the Lightning connector with your iPhone turned off.

Please, or to view the hidden text

So, you once again needed to recharge your device from Apple, but this time the message “This accessory is probably not supported” appeared on its display. What is this error, why did it occur and how to fix it - we will look at all this in our today's article.

For this problem, usually, there are several possible reasons for the appearance:

A cheap replacement for the original Apple Lightning cable. Some substitutes can work just fine for a long time. However, some of them are categorically rejected by the iPhone or iPad.
Damage to the original Lightning cable. It's no secret that Lightning cables wear out incredibly quickly. Some users claim that in less than six months their Lightning cable (the place near the connector) wears out and becomes unusable.
Damaged or dirty charging port. Dust, dirt, or moisture may have entered the port under the Lightning cable, resulting in the error "This accessory is probably not supported."

Fixing the error "This accessory is probably not supported"

Reconnecting the Lightning cable

So, the solution to this problem in most cases is quite simple. First of all, you should try to simply reconnect your device to the Lightning cable several times to try to get rid of the error. Some users claim that after they reconnected the charger to their iPhone or iPad several times, the "This accessory is probably not supported" error has disappeared.

Change USB port on Mac or PC

Let's say that you encounter the error "This accessory is probably not supported" while connecting your iPhone or iPad to your PC / Mac. A faulty USB port could be a possible cause of this problem.

Try plugging your Apple device into a different USB port and see what happens. If the connection error has disappeared, then perhaps you are experiencing some problems directly with the USB port itself on the computer / MacBook.

Some users strongly recommend trying this: Connect the Lightning cable to your iPhone or iPad. Wait until the display shows the error "This accessory is probably not supported" again. Then reboot your device with the charging cable connected. As soon as it turns back on, check for an error. This is how people get around this problem from time to time in a cunning way.

Trick with error message

So, if none of the above helped to solve the error "This accessory is probably not supported", then you can resort to one little trick with the message itself. Connect the Lightning cable to your Apple device and wait for the error to appear.

As soon as it appears, press the "Close" button on the display and hold your finger on it, and then disconnect the Lightning cable from the device. Then plug it back in and see if the problem has been fixed. This method helps very few, but, as noted by users, it sometimes works.

Cleaning the charging port on the device

As we already stated in the reasons, the error "This accessory is probably not supported" can appear due to a dirty charging port on your iPhone or iPad. The problem can be solved by a simple cleaning port of the connection.

Grab something like a paper clip and gently try to clean the Lightning connector on your device of anything that might be in there. Perhaps dust has collected there or something has got into it that does not allow establishing a correct connection with the device.

Once you're done cleaning, try connecting the Lightning cable to your iPhone or iPad again. Contamination is the second most common cause of this problem. However, if this was not the case, then we have sad news for you.

Replacing the Lightning cable

Ok, obviously nothing helps and you can't charge your Apple phone or tablet. By the method of exclusion, it is not hard to guess what is the reason for the error "This accessory is probably not supported" - a Lightning cable or a port for it on the device.

If you are using a non-Apple cable, try replacing it with the original one. Yes, this solution will cost you a lot more, but it will definitely solve the problem. If you are using the original cable, then it could simply be damaged. Apple users are constantly complaining that the Lightning cable breaks down incredibly quickly. In this case, you will need to find a new Lightning cable.

Well, if you realize that the problem is not in the cable, then it definitely lies in the port on the device. It could be damaged due to some events, after which it became impossible to connect the charging to the phone. If you think that this is the case, then we recommend that you contact the service center.

Found a typo? Select the text and press Ctrl + Enter

Apple has long been a global leader in the mobile device market. Even though the products are quite expensive, they are still in high demand. There are many reasons for this. First of all, the company's developers offer users innovative technologies, unique design, and excellent technical characteristics. The indisputable advantage of gadgets is their high quality and reliability.

It is considered prestigious to own devices from Apple. Therefore, most people who are able to afford a smartphone or tablet from this company are truly proud of their purchase. But lately, they have been often frustrated by the error notification that appears on the screen when connecting, for example, a cable.

What do you mean, "This accessory is probably not supported"? Every iPhone owner can face this problem. What is the reason for this error? Let's figure it out.

Features of the iOS operating system

iOS is a closed system. It is installed only on Apple devices. After studying all the nuances, users have ambivalent feelings - admiration and contradictions. For example, devices running on iOS are resistant to all sorts of virus attacks. How many people, so many opinions. Therefore, disagreements cannot be avoided.

It is rather difficult to realistically evaluate this system due to its closed nature. However, what can be said with absolute certainty is that the developers have done everything possible to protect users. If you look at it from one side, then such actions are an indisputable advantage. However, more often than not, they are the ones who create certain problems.

More recently, iPhone owners began to encounter an error accompanied by the appearance of a message on the screen. Its content is as follows: "This accessory is probably not supported." The original cable, which is manufactured by Apple, does not cause such problems. But when buying third-party accessories, the system automatically recognizes the threat to the device. More often than not, this is what causes the error message to appear.

The first swallows

For the first time, this problem began to manifest itself in smartphones running on the seventh version of iOS. It was at this time that the developers began an active struggle with unofficial accessories that could be used for "apple" gadgets. This list also includes non-original iPhone charging. "This accessory is probably not supported" - such a message could be seen by connecting it.

But iOS7 still worked with such accessories, and already in the ninth version, changes were applied that led to the fact that the devices completely ceased to function.

Lightning cable

By and large, this problem has spread widely after Apple switched to new cables that are equipped with a Lighning port. It was during their use that the owners of gadgets first encountered such an error. On the screen, messages began to appear with the following content: "This accessory is probably not supported."

iPhone 5S is the first victim to which a lot of negativity from users has poured. You can find a large number of reviews on this topic on the net. Ordinary people do not understand why they need to fight with unofficial accessories. However, if we consider this issue much deeper, then you can learn about such cases when expensive gadgets failed due to poor-quality cable. Moreover, it was not only the batteries that broke, but the devices themselves turned into "bricks". The worst thing about all this is that even the owners were injured.

Currently, most of the marketplaces are engaged in the sale of fakes. Sometimes they have Apple products for a small price. However, the low cost indicates that this device is not original. Based on this, the company found one and only way out in the fight against fraudsters, protecting both its products and users as much as possible.

Lack of MFi support

The certification system has become the only solution that has made it possible to protect iPhone owners from low-quality accessories. The latter are currently causing great harm not only to users, but also negatively affect the stability of consumer demand. There are already doubts about the quality of Apple products. However, you need to understand that the problem is not at all in the smartphone, if a message appears on the screen: "This accessory is probably not supported."

iPhone 5S and other models report this error if Apple's "signature" is missing when connecting the cable. No handicraft accessory can be certified. The check is carried out automatically. When the system searches for inconsistencies, the gadget is simply turned off. In order to avoid such problems, it is necessary to use only original devices that are produced directly by Apple itself or its partners.

Damage to the accessory

If the iPhone says “This accessory is probably not supported,” you need to check the cable for visible damage. Sometimes the problem is a violation of the port itself or the integrity of the insulation of the wire. Neither the original accessory nor the fake is immune from this. Surprisingly, even the smallest damage from the phone system can be considered critical. After automatic error detection, the gadget's work processes will be suspended, and a message will appear on the screen: "This accessory is probably not supported."

In order to avoid damage to the cable, it is recommended not to bend it during storage or use. The highest quality models are those that are equipped with a hard rubber braid or titanium. They are somewhat more expensive than other options, but they have a longer service life.

Jailbreak. We are looking for a way to fix the problem

Unfortunately, currently no system is perfect, iOS is no exception. Although it has developed high-level protection, advanced users know how to bypass some of the restrictions. In simple terms, then simply hack the system. These actions are illegal, therefore the device will be denied warranty service. Before deciding on such a step, it is necessary to weigh all the possible risks.

So, if there is still a desire to use non-original accessories for the iPhone 5S and subsequent models, then you need to run the activator of non-certified Lightning cables on the gadget.

Step-by-step description of "cheating" the system:

Jailbreak with TaiG.
Open Cydia directory.
The file storage must be updated.
After that, go to the Source tab.
Activate the Support Unsupported Accessories installation by accepting the terms.
After completing the process, you should reboot the device.

If you implement this tweak on your smartphone, then the message "this accessory is probably not supported" will no longer appear on the screen. However, it must be understood that all responsibility for the manipulations carried out lies in general with the owner of the device. In case of contacting the service center, he will most likely receive a denial of service or, as an alternative solution, he will be offered a paid repair.

Search for causes and their elimination

In order to protect yourself from such a mistake, you simply need to purchase a new high-quality cable, no matter how trite it may sound. However, if for some reason this cannot be done, and the message "this accessory is probably not supported" appears constantly on the screen, then you can try some simple actions.

First of all, it is recommended to turn the cable over. Sometimes some of the contacts are damaged on one side, but at the same time remain working on the other. This method will not help get rid of the error for a long time, but it will function for several hours.

If you urgently need to charge the gadget, and an error appears on the screen with the following content: "This accessory is probably not supported", then you can simply turn off your smartphone. In this state, the operating system does not function, and the power controller will still transmit current to the battery.

The reason for this error can be a rather commonplace problem - port pollution. Sometimes in the gadget, fine dirt or dust is clogged directly into the connector itself. It is for this reason that the device stops recognizing the connected cable. To fix the problem, you just need to clean the port.

Finally

This article examined the main reasons leading to an error in the functioning of the gadget if uncertified accessories for the iPhone 5S and other models of the Apple manufacturer were connected. It is important to understand that if a message appears, the phone is not in danger of serious damage. Otherwise, the choice is yours: bypass the system and take risks, or give preference to the original cable.

Apple has developed clever protections for iPhones that are designed to prevent their owners from using unofficial accessories. This caution is explained by the fact that third-party devices can damage the smartphone. However, the error "This cable or accessory is not certified" may occur even among ardent fans of Apple products. What is the reason and how can I fix the problem?

USB cable is damaged

If you are using the original cable, and the message still appears on the screen, then there is a possibility that the accessory is damaged (small defects are not always noticeable). To finally make sure of its malfunction, you can connect the same (original). If the message disappears, then it's time to change the cable.

If there are any defects, the cable must be replaced.

Clogged connector

Over time, dust and dirt accumulate in the connectors. This causes a violation of the contacts of the cable with the device and, as a result, the error "This cable or accessory is not certified." This problem is especially true for Lightning inputs, as they have no protection whatsoever.

With prolonged use, the USB connector may become clogged, so it must be cleaned periodically.

Obviously, in such a situation, it is necessary to clean the device. To do this, you need a regular wooden toothpick. We gently run it along the edges of the connector, without pressing hard, so as not to damage anything. After that, we try to reconnect the cable.

For the procedure, you can also use a cotton swab moistened with alcohol (not water). The main thing is not to use metal objects for such purposes, which can scratch the connector and damage the contacts.

It should be remembered that the cleaning procedure is carried out with the device turned off.

Cleaning the iPhone connector - video

https://www.youtube.com/embed/2i6cysxp0aM

Using an uncertified cable

Many people prefer cheap Chinese cables, which are not only much cheaper in price, but also have a wider variety of models. However, Apple products are adept at recognizing uncertified accessories and displaying a corresponding error on the screen, prohibiting them from performing any actions: charging the device or transferring data. But there are always ways to work around this problem.

How to work around the "This accessory is probably not supported" error

Without turning off the device

Disconnecting a device

Turn off the device completely.
Connect one end of the cable to a jack and the other to a network or computer.
Turn on your iPhone, iPad or iPod. It will start charging and it will be possible to synchronize it with the PC.

If you pull out the cable, the message will appear over and over again and you will have to repeat the previous steps.

iPhone can be charged even with an uncertified cable

Jailbreak iPhone

Jailbreak is getting full access to the iOS file system. This operation can be done using the programs:

TaiG (iOS 8.0 - 8.3);
Pangu (iOS 7.1 - 7.1.2);
evasi0n7 (iOS 7.0 - 7.0.6);
p0sixspwn (iOS 6.1.3 - 6.1.6);
evasi0n (iOS 6.0.0 - 6.1.2);
absinthe 2 (iOS 5.1.1 or 5.0.1).

Even if the messages appear after the actions taken, you can still do any manipulations with the iPhone.

To avoid the error "This cable or accessory is not certified", use devices from an official manufacturer and monitor their condition. If you nevertheless decide to use an unofficial product, then be prepared for the fact that you will have to perform a number of manipulations each time.

Starting with the iOS 7 operating system, Apple devices have learned to identify uncertified accessories. When connected to smartphones and tablets with unofficial Lightning cables, iPhones and iPads show the warning message "This cable or accessory is not certified, therefore, it cannot be guaranteed to work reliably with this iPhone."

This feature of iOS became known with the release of the first beta version of iOS 7. However, if in test assemblies the operating system simply warned the user that "the accessory is not certified", then starting from the final versions of iOS it blocks the possibility of using them. The same applies to the new iOS 8 platform. In the case of cables or adapters, this means that the iPhone or iPad cannot be charged using budget Chinese cords and docking stations.

Bypassing this feature of iOS 8 allows a special tweak that appeared in the Cydia catalog. Customization for someone might be another reason for jailbreak. Moreover, it is available absolutely free.

How to bypass protection against uncertified Lightning cables and accessories in iOS 8:

Step 1: Jailbreak with TaiG. A guide to using the utility can be found on MacDigger for Windows and Mac OS X.

Step 2: Open Cydia from the desktop and wait for the repositories to update.

Step 3: Go to the Search tab and enter "Support Unsupported Accessories 8" in the search box.

Step 4: Click the "Install" button, then "Accept" and make the respring changes take effect.

It's all! You can now use non-certified accessories and charge your iPhone and iPad using third-party Lightning cables.

Bypassing this feature of iOS 8 allows a special tweak that appeared in the Cydia catalog. Customization for someone might be another reason for jailbreak. Moreover, it is available absolutely free.

How to bypass protection against uncertified Lightning cables and accessories in iOS 8:

Step 1: Jailbreak with TaiG. A guide to using the utility can be found on MacDigger for Windows and Mac OS X.

Step 2: Open Cydia from the desktop and wait for the repositories to update.

Step 3: Go to the Search tab and enter "Support Unsupported Accessories 8" in the search box.

Step 4: Click the "Install" button, then "Accept" and make the respring changes take effect.

It's all! You can now use non-certified accessories and charge your iPhone and iPad using third-party Lightning cables.

The original iPhone cable has two major drawbacks - it is very unreliable and very expensive. And, of course, no one wants to give 1,590 rubles (yes, that is how much the charging wire made at Apple factories costs) for a cable that a priori will not last long, and therefore many decide to buy a non-native charger.

And having saved a lot (prices for non-original cables start at 100 rubles!), The happy user returns home, but bad luck - connecting his iPhone to a new wire, he realizes that the gadget does not charge and does not sync with iTunes, and on his screen appears depressing the inscription - "This cable or accessory is not certified ...". What to do in such a situation? Let's figure it out!

What can I say - this state of affairs, to put it mildly, is discouraging for an ignorant user. In his eyes there is a dumb question - "Well, how did my smartphone know that I bought the charger for it not in the App Store ?!"

And, really, from where? The opinions of experts on this matter differ. Some argue that the reason is in a cunning mechanism built into iOS that recognizes the original wire by certain "beacons", others that a special chip that signals authenticity is built into the charging itself. However, one way or another, the fact remains - Apple, as it should, made sure that non-original cables do not work with the iPhone.

Not all non-original cables are created equal.

However, here's a paradox, on the Internet there are a lot of users who say - "I bought a non-native wire and everything works!". In fact, there is no paradox, just according to the "law" Apple i-devices can be charged not only from cables made directly by the "apple" giant - that is, original ones, but also from those made by partner manufacturers - an unoriginal "detail" is obtained but is certified. These charging wires have a special marking - MFI (Made for iPhone).

The quality of products marked with this honor mark is personally controlled by Apple. And by the way, Apple receives, let's say, a "tax" from every manufacturer working under the MFI program. This fact leads to the fact that MFI chargers are more expensive than those that do not have such a marking, but still not as expensive as the original ones. The average price for a non-original certified cable is 500 rubles.

Where can you buy an MFI cable for iPhone? In general, in any good electronics store. Ask a consultant and they will help you.

What to do if iPhone won't charge with non-original cable?

However, back to our problem, the wire has already been purchased and refuses to charge our iPhone or sync it with a PC. What to do? Good news! Users have come up with several "tricks" for the all-seeing eye of Apple. We will tell you all about them.

By the way, as you know, the original Lightning is distinguished by the ability to work with a smartphone, which side do not insert it (this feature is implemented according to the scheme, a special switch is installed in the cable chip), however, a non-native Lightning may be deprived of such an option (the Chinese simply forget to take into account the aforementioned switch in the circuit ), and therefore, in order for the wire to start charging, it may just need to be inserted with the other side.

"Close, close"

In some situations, in order for a non-native cable to start charging, it is enough to do the following:

1 Connect iPhone to charger or PC - depends on the task - charging or syncing. 2 When a notification window appears about the impossibility of working with the cable, tap on the "button" - "Close". 3 Now you need to unlock the device - the notification will appear again - again tap "Close" and disconnect the wire from the iPhone (do not block it!), And immediately reconnect it.

Surprisingly, quite often this strange instruction helps. Are you not one of those lucky ones? Then let's try the next method.

Turn off and on

This clever method of working iPhone with non-original cable is as follows:

Turn off the device.
We plug it into an outlet (if we want to sync with iTunes, we connect it to a PC).
We turn on the smartphone and ... charging is on!

By the way, if you now pull out the wire and put it back in, charging / communication with the PC will stop, to resume it, the iPhone will have to be turned off again.

Air mode

Some users, however, assure that there is no need to turn on and off the smartphone in vain, you can deceive it simply by activating the air mode. And sometimes it is enough just to turn it on, connect the smartphone to charging and when, as they say, the process goes on - you can turn it off, but more often - you need to keep the air mode active all the time during charging.

Why is iPhone working with non-original cables dangerous?

Unfortunately, the fact that non-native cables do not charge the iPhone or sync to iTunes is not the main danger they pose. Chinese ruble wires are not made according to standards, and therefore the proper balance of voltages and currents may not be observed, as a result of which, in the best case, the iPhone will charge longer and / or discharge faster, in the worst case, the power controller will fail, which will entail very expensive repair. For the fifth iPhone, such a repair will cost, for example, $ 100, and this is not the situation when you can fix the device yourself.

However, we will not advise buying an original wire for 1590 rubles. You don’t have to pay big money for the original, but buy a Chinese cable for 100 rubles for such an expensive gadget like the iPhone, risking its "health" - just ridiculous, you must agree. What do we recommend? Adhering to the golden mean and purchasing a certified cable is an acceptable price and a quality guarantee.

Why iPhone won't charge with the original cable

And finally, let's consider another very interesting question. Sometimes discouraged users ask - “Why did my iPhone refuse to charge from the original wire, displaying the message“ This cable is not certified? ”. The answer is actually simple. Sometimes this happens if the cable is damaged or its pins are clogged.

Lightning cables, which were first introduced with the iPhone 5, are especially prone to this problem. The charging cable for 4S and earlier models still had a more reliable design. So if the iPhone 5 won't charge with the original cable (or, in general, any other model), try cleaning it with a cotton swab and alcohol. If it does not help, you will have to buy a new one. Fortunately, you already know how to choose the right one.

Let's summarize

So, if the iPhone does not charge from the purchased non-original charger, this problem can be fixed. However, you need to understand that the use of a non-native cable can lead to sad consequences. On the other hand, buying an original wire is not very economical. Our solution - a certified cable with the MFI marking - is not expensive, and quality guaranteed! By the way, do you understand that MFI cables are also faked? So, of course, you should only buy them from reliable sellers!

When charging an iPad or iPhone using the Lightning connector, the device may display a message that reads: "This accessory or cable is not certified and cannot be guaranteed to work with this iPhone." Charging will then stop.

There are several reasons for this "strange" behavior of the gadget. But, before you start looking for them, you need to disconnect and then reconnect the cable to the Lightning connector. In addition, you can solve the charging problem by connecting to a different USB port or to a different outlet. But if there is no positive result, then the problem is hidden deeper.

Increase

Non-original accessories

The reason for the appearance of such a message is the use of non-original accessories. Branded products are more expensive than "analogues" of unknown manufacturers. It happens that such things work well, and sometimes they refuse to function outright.

As always, this kind of protection for apple growers can be circumvented. To do this, follow these steps:

connect the cable to the iPhone or iPad;
after the appearance of the ill-fated message, click "Close";
unlock the device;
when the message is displayed, click "Close" again;
without blocking, pull the cable out of the device connector;
connect the cable again.

A much better option is to purchase a cable that will work well and won't damage your expensive gadget. There are alternative inexpensive but high quality third party accessories. On their packaging you can see the inscription “ Made for iPhone / iPod / iPad ”.

Damaged cable and debris

The cable may refuse to work due to a banal breakdown. The accessory may have gotten wet, corroded, or physically damaged. We'll have to buy a new one, because such things cannot be repaired.

This is the most easily fixed cause of the cable support failure message. Charging debris is a physical obstacle. Such cases are rare, but still occur. Threads, fluff, crumbs or other particles from the bottom of the pocket may enter the port. To solve this problem, you need to check the ports and, if necessary, carefully remove any debris stuck there.