IPhone vibration switch does not work. How to enable or disable the "Sticky Keys" of the keyboard Fix the sticky volume button on the smartphone yourself

The iPhone is one of the most reliable phones of our time, but even it can break. You may notice that switching to silent mode and back will be done every other time. Or even the Mute switch will move without resistance, with no mode switching at all.

In this case, normal use of the iPhone will be difficult: when the call sound is turned off, you can miss an important call, and the inability to turn on the silent mode can lead to an unpleasant situation due to a loud call during a meeting or other official event.

Why is the mode switch button not working?

Several breakdown options are possible:

button malfunction;
loop failure;
vibration motor malfunction;
electronics malfunction.

The easiest option is a button malfunction. It can malfunction due to dust or liquid ingress, as well as due to normal mechanical wear. In the first case, it is enough to rinse and clean the button, and in the second, it will need to be replaced.

It is already more difficult to deal with the train. On the one hand, the breakdown can be simple (loose or oxidized contacts), and on the other hand, the conductor inside the loop may break.

Malfunction of a vibration motor is rare, but it can also fail due to liquid trapped inside or due to a shock when dropped. Vibration mode will not work in this case. In this case, the vibration motor must be replaced with a new one. But the most difficult is the burnt-out microcircuit. If it is easy to replace the button or cable, then the microcircuit will have to be unsoldered.

How can the Mute switch be repaired?

In simple cases, you can fix the malfunction as follows: disassemble the iPhone, rinse the contacts of the button and loop, if necessary, order a new spare part and replace it.

But to do this work, you need to have at least elementary experience with complex equipment, otherwise you can simply break the latches or even order a spare part from another model. There is also a risk of buying a non-original part with a short life. Well, replacing the microcircuit will require the use of a soldering station, so such an operation is not carried out at home.

Therefore, it is better to turn to professionals, such as employees of our service center Total Apple. We can repair any Apple gadget. At the same time, we use exclusively original spare parts, therefore we provide a maximum warranty period (3 years) for both parts and work.

If you are the proud owner of a Xiaomi smartphone and one fine day the lock and volume down keys stopped working, do not rush to carry it to the service. This article will most likely help you get your phone back on track.

Probable causes

Depending on the circumstances, the cause of this problem may be different.

If you have been using the phone for a long time, it is possible that the problem is in the contacts, which have oxidized over time. But then, most likely, the buttons would not stop working at the same time.

Another reason is water ingress. But these are mechanical breakdowns and you would probably determine that this is the problem.

Therefore, discarding the first two options, we can assume that the buttons stopped working due to a system failure. The fact is that the keys can be blocked by the power controller after the battery is completely discharged.

We will reboot to treat the smartphone. But how to do this if the lock button does not work, which, when pressed for a long time, starts the shutdown / restart dialog. Unlocking your phone can be another problem. If you are reading this article, you have probably found a way to unlock your phone, for example, using a fingerprint sensor. Therefore, we will not dwell on this issue.

How to restart a Xiaomi smartphone without a button?

Try all the options with special reboot applications from the Play Store, and you will come to the conclusion that half requires root, and the other half simply does not work. In other ways, the shutdown / restart dialog cannot be started in any way.

Fortunately, MIUI has a feature that requires a reboot when activated. Go to Settings -> Lite Mode. Let's activate it.

After that, the phone will be rebooted and the buttons will work again. In this case, the interface will change to the option "for parents", you can return everything back using the same menu item.

A smartphone is a multifunctional device, and many factors underlie its multifunctionality. One of them is the volume control buttons, the capabilities of which, besides their basic functions for working with sound, few people know. In this article, we'll go over all the functionality of the volume rocker and determine how useful they are.

The photo

Today, almost any smartphone supports the function of capturing pictures using the smartphone volume buttons as standard. However, in case the manufacturer decided to limit the functionality of the firmware, there is a solution in the form of various third-party programs, one of which is QuickClick.
The program works in a similar way in the case of video recording.

Turn on the flashlight

Again, with QuickClick you can turn the flashlight on or off with a simple press of the volume button. It is worth noting that today most devices support this function initially, in particular, we are talking about new gadgets on the fresh 5.x.x.

Open applications

QuickClick will also allow you to open third-party applications by pressing the volume buttons. You can select the applications you are interested in in the QC settings. An excellent opportunity for those who, for example, often log into the VKontakte application or the Android World - AndroidInsider.

Play music

The same application will allow you to listen to music.
The usual method works in the following way:

You will unlock your smartphone;

Open the music player;

Choose a track.

However, with QuickClick, all you have to do is press the volume button and your favorite track fills the room with interesting nuances.

Emergency situations

If you are stuck in an elevator or have forgotten your keys at home, and the door is slammed shut by a stream of air, the only solution is to call the emergency service. However, it also happens that there is no time to unlock the gadget, go to contacts and search for the desired number at such moments. The best solution would be to set the volume button to automatically dial the emergency service using QC. By the way, you can choose any contact. For example, if you hang out with a friend a lot, it might be a good idea to add their contact to the volume rocker actions.

Lock Button

Lock button not working? Not a problem. You can also unlock the gadget using the volume buttons. To do this, you need the Volume Unlock Button Fix application, which will save you from going to the service center for the help of specialists who require a considerable amount of money from customers for the services provided.

Security

Thanks to the next app, Oops! AppLock, you can block access to certain applications.
When launching the application, the user needs to understand how to unlock the gadget, because the principle of unlocking is in the algorithm for pressing the volume buttons. For example: the sequence of pressing Up - Up - Up. By the way, according to the standard, this is exactly the sequence. The application itself is hidden under the usual notes, in order to go to the program itself, you need to press the "Up" volume button three times in the Note application.

Flip through web pages

If you use UC Browser, it will not be difficult to assign scrolling of web pages to the volume control buttons, because this function is built into this browser from the very beginning. But in the case of Chrome, you need Root rights.

If they are still there, you need to download Xposed, go to the "Download" section and find the XUpDown module, after installing which you need to go to it and select Chrome.

Screenshot

This is the second most popular function of the volume buttons (in the first place is the standard volume up / down function). In order to take a screenshot of the screen, you need to simultaneously press the volume buttons "Up" and "Down". The feature works on any Android device.

First of all, it is necessary to say a few words about why add additional functions to the hardware keys of a smartphone at all. The fact is that this is perhaps the only way to perform any action you need without looking at your gadget, that is, by touch or even in your pocket. In addition, there are several actions, such as cursor control on the screen, which are more convenient to perform in this way. Below you will find a list of such operations. Please note that some of them will require you to have superuser rights.

Launching the applications you want

QuickClick is a multifunctional utility designed to quickly launch applications using the volume keys. In this case, you can use different programs for different sequences of presses. For example, two taps on the volume rocker will launch the camera, and three taps will launch the flashlight. An important advantage of QuickClick is that it is one of the few programs that does not require root to function.

Waking up your smartphone

This utility will become a real lifeline for those users who have a broken power button or it is located on the case so inconvenient that it is difficult for you to use it. The Power Button to Volume Button program is extremely simple and performs only one function: it allows you to wake up the device by pressing the volume rocker. But it is free and does not contain ads.

Scrolling long pages

Some book readers use the volume buttons to scroll through pages by default. If you have already got used to this wonderful feature and want to use it in other programs, for example, in a browser, then for this you need to install a special Xposed module called XUpDown. What is Xposed and how to make friends with it, you can read in.

Switching tracks

This is one of the most requested functions of the hardware buttons, which will allow you to switch your music player to play the next or previous song. This feature has been implemented in several programs, but we recommend that you opt for Xposed Additions. In addition to managing music, this Xposed module has several additional features that you might find useful. You can read more about Xposed Additions.

Cursor position control

This option is useful for those users who work on documents. With its help, you can specify the position of the cursor much more accurately when entering text than poking your fingers across the screen. To activate this feature, we need another multifunctional Xposed module called XBlast Tools. In its depths you will find a huge number of options, but in the context of this article we are only interested in the section "Tweaks of the volume keys". Here you can link the cursor movement to pressing the volume rocker and set its direction.

Secret video recording

Sometimes you may be a witness to a situation that needs to be filmed, but in such a way that no one notices it. For example, you witnessed an offense and do not want to draw attention to yourself by explicitly filming, or you are interviewing a person who is embarrassed in front of the camera lens. In this case, install the Secret Video Recorder program, which can take pictures by obeying your presses on the volume buttons. At the same time, the screen of the device will be turned off, and nothing will give out the fact that the recording is in progress at the moment.

Secret unlock smartphone

If you want to protect the contents of your device from unauthorized access, you should set an unlock password. However, this password can be spied on by strangers when you use the gadget in their presence. An interesting and unexpected solution to this problem comes from the Xposed module Sequence Unlock. With it, you can set a special sequence of pressing the volume buttons, which will unlock the device. For example, three clicks on the up button, followed by one on the volume down button. It is very difficult to spy on and fix the movements of your finger, and the utility turns off the standard unlocking method via the power button.

If the volume button on the iPhone does not work (for example, it jams), do not rush to take the phone to a service center. Before finding out the cost of repairs and paying for the replacement of buttons (switching to silent mode or adjusting the volume), clarify the cause of the malfunction and try to fix it on your own.

The main causes of malfunctions

Initial diagnostics of the device can be done at home. If the volume button on the iPhone does not work - you do not hear a characteristic click, you feel that the mechanism has loosened - most likely, the reason is mechanical damage. Shocks and drops easily damage cables, screen, motherboard, and other buttons (volume, lock, iPhone power on / off, switch to silent mode). Often, a smartphone not only does not go into silent mode, but also stops turning on altogether after a strong mechanical impact.

Often, problems with the iPhone occur due to liquid flooding. The penetration of moisture into the interior of the case leads to serious consequences. It is important to dry the phone on time, clean the contacts and tracks, and prevent corrosion, otherwise the problems may not only be with the sound.

The Volume buttons, Power buttons, and Mute buttons do not always break. In some cases, they stop working due to software glitches. For example, when you install unlicensed software on an iPhone or the firmware does not work correctly.

Symptoms of malfunctions:

the button is broken, does not respond
volume control (decrease, increase) does not work
button sticks, works irregularly

If you are sure that the buttons are not working due to a factory defect, immediately contact your Apple authorized service center. Otherwise, try to fix the problem with the iPhone yourself.

Troubleshoot software and adjust settings

In the process of diagnosing the device, you should pay attention to the iPhone settings - the phone may be in silent mode. There is also a possibility that a recently installed application is causing the lock. Then it's worth doing a hard reboot:

press "Power" and "Home" at the same time (for iPhone 7, this is how the on / off and volume buttons work, if the latter is not broken)
hold them until the phone turns off and the Apple logo appears

As a last resort, go through the iOS restore procedure through iTunes.

Where to go for repairs

Contact the specialists immediately if the software is working properly, and the mechanism for adjusting or enabling the silent mode has stopped working due to mechanical damage or flooding. When the warranty period is violated, it is not necessary to waste time on a trip to the service center - it is much more convenient to call the master at home.

Volume buttons stopped working on iPhone? This problem causes a lot of inconvenience in the process of using the device. Below are detailed descriptions of the volume key repair process.

Possible causes of breakdown

Contaminated keys are common, but the most common cause. Over a long period of time using the phone, fine elements, dust, etc. can get into the holes between the keys and the body. Due to contamination, the keys work, but they are pressed 2-3 times. To clean the buttons, it is better to use an alcohol solution and a cotton swab;

The button may not work correctly after replacing the top motherboard cable. This is due to the inaccurate connection of the loop (the volume up / down contacts could be closed). In this case, only changing the keys will help;
Virus software that interferes with the operation of certain functions of the operating system;
The appearance of a malfunction after the impact or fall of the IPhone - this requires replacing the volume increase mechanism;
The presence of liquid in the body;
Crash after OS update.

The key is pressed, but the volume is not adjustable

If, after pressing the volume control, a ringer window appears on the screen, but there is no volume level indicator at the bottom, the problem is not a breakdown of the mechanism, but a failure of the operating system.

First, try to fix the software problem in the simplest way - restart your phone (soft reset). As a rule, this procedure allows you to eliminate third-party processes that interfere with the operation of standard iPhone components. If nothing has changed after the restart, try pressing both sides of the volume keys at the same time. Repeat the action 3-5 times. This can help bring back normal operation.

Check for available updates. A new build of configuration parameters solves the problem in 90% of cases. Also try rolling your phone back to factory settings.

Until the key mechanism is replaced, you can use the Assistive Touch function with which the desired button will appear on the desktop screen. To enable the option, go to Settings - General - Assistive Touch and move the slider to the "On" position.

Replacing volume keys

Didn't all of the above methods help? In this case, we can say that the volume button of the iPhone does not work due to a breakdown of the mechanism or as a result of contact closure. Replacing the key is quite simple and you can do it yourself, following the instructions:

Prepare iPhone parsing tools (screwdriver set, plastic spatula, tweezers, suction cup, new volume up mechanism);
Open the device. Then detach the back cover from the display. Remove the Phillips screws shown in the illustration from the battery connector cap. Disconnect the battery cable and remove the battery;

Locate the volume control cable and remove its cap by unscrewing the screws shown in the figure:

Detach the top cable bracket from the phone;
Unscrew the screws with the bracket contacts;
Remove the contact holder;

Lift the connector of the volume control cable with the flat spudger;
Remove the following screws:

Remove the button switch mechanism with tweezers. At this stage, you can try to clean the component, perhaps it is not broken, but simply clogged;
To replace the keys, carefully remove them with tweezers. This tool prevents damage to the button membrane;

Replace components and reassemble the device to its original condition.

You can find any instructions for self-repair of Iphone on our website, or make a call to a specialist for to any place convenient for you.

Hello everyone! What does a person do right after buying an iPhone? That's right, begins to study it closely. Scratches? Cracks? Clearances? All this is sought with an enviable, sometimes even some kind of manic-paranoid persistence. Is this strange? It seems to me not. After buying a rather expensive device, we have the right to count on the fact that everything will be perfect in it.

And at the moment of such research, you can easily find out the fact that the mechanical power (volume) buttons are not tightly installed and shake a little. On the one hand, it's frustrating. And on the other hand, maybe it’s like that for everyone? Let's figure out if the backlash of the Power and volume up / down buttons is a fault or is it a common design feature of the iPhone?

One two Three. Let's go! :)

Personal experience or do the author's buttons on the iPhone stagger?

Stagger, but not much. Moreover, I drew attention to this right from the moment I bought my first iPhone 5S. I was very worried about this and even wanted to. But all this desire only lasted the first few weeks. Then, as they say, "scored" and this device has been serving me for the 4th year in a row.

The most interesting thing is that after all this time, the Power button is shaking almost the same as it was from the very beginning of use. Although, small improvements are still present - at the end of the article there are observations about what this may be due to.

In general, if you think logically, then the buttons will always have a slight backlash - after all, they must be pressed, and therefore there should be a small gap.

Before writing this article, I walked through my friends, acquaintances, relatives and "felt" their iPhone for wobbling volume and power buttons. To be honest, I have not seen the most ideal fit in anyone - there is a small stroke in 100% of cases. Although, on a couple of iPhone SEs, the backlash was quite strong (as for me), but the owners simply do not pay attention to it and use the phone for their own pleasure.

On which models is the defect most common?

Judging by the reviews on the Internet, in most cases, users are unhappy with the iPhone 5S and SE.

Which is logical:

These are some of the most popular and widespread iPhones on the market. The more devices, the higher the likelihood that someone will be upset.
The body of the devices is exactly the same. Apple, having released the iPhone SE, did not change anything in the design, which means that the problem with the backlash buttons smoothly flowed into the new model.

And while iPhone 6 and 7 owners also complain about dangling power and volume keys, there are far fewer of them.

Loose buttons in iPhone - marriage or not?

Moving on to the most interesting thing - is such a defect a marriage? What will be the result of contacting the service center - will they repair (exchange) or say that "this is the norm"?

In fact, it is impossible to answer this question unambiguously. Each person has his own idea of quality - what for someone seems to be a normal move and "landing" of buttons, in the eyes of another will be a terrible backlash.

Moreover, this applies to both the user and the employee of the service center. There are no clear criteria such as "here the power key should have a gap of 1 mm and walk to the sides by 0.5 mm" in any instruction.

In addition, this disadvantage can manifest itself in different ways:

There is backlash, but it does not affect anything.
Loose buttons interfere with the normal functioning of the device - for example, their rattling is heard when recording a video, or they are pressed "somehow wrong" and sink, or there is some other good reason to recognize this defect as a marriage.

Accordingly, in the first case, the service center will call it "technical backlash", a common situation, design features - and will, in general, be right. But in the second, you can already emphasize that the rattling prevents you from using the device normally, which means it is a marriage and.

How to fix button backlash yourself?

On some forums, it is advised to disassemble the device and put something under the Power button - they say, after that the key will become like a glove and will stop dangling. In my opinion, this is a rather dubious event, because:

Assembly and disassembly must be done very carefully, and the warranty will be lost (if any).
It is also undesirable to stuff any foreign objects inside the iPhone (even if this action has a good purpose).

There are much simpler ways to eliminate backlash:

Use a tight (e.g. silicone) cover.
Wait until dust accumulates in the button hole (during normal and daily use).

I agree - there are not very many options. And the second point generally seems ridiculous. But!

Some users really note the fact that after some time the Power backlash decreases and associate this phenomenon precisely with the clogging of the hole with fine dust. I don't know how true these messages are, but I would definitely not intentionally pollute the iPhone :)

P.S. If the buttons on your iPhone are wobbly, be sure to tell your story in the comments! Does it bother you and will you contact (or have already addressed) the service center?

2014-04-11 19:40:15

It is quite difficult today to find such a person who would not know about the reliable performance and high-quality assembly of the iphone 5s. The smartphone is indeed the leader in a number of indicators. But even the best phone cannot be completely immune to accidents or minor glitches.

Almost all control in a smartphone is carried out using a touchscreen display. But the most important functions are assigned to the familiar buttons. This will adjust the sound level, turn the phone on or off, and return to the start page. Be that as it may, but it is these mechanical elements that are the weak link of any phone. They can stop performing their functions properly at any time.

Very often, users on the Internet say that the volume control button has started to stick. A variety of factors can lead to this phenomenon. So, for example, the button can become clogged, which will lead to its jamming in a certain mode. In this case, the most common cleaning may be necessary. It is possible to carry out this procedure on your own, but there is no guarantee that everything will end successfully. It is best to contact specialists who will perform all the necessary actions very quickly and will not require high rewards for this.

There are other reasons as well. The loop that transmits all signals from the buttons directly to the system can fail. This can happen after the phone has been dropped or it has been in contact with water for a short time. In any case, the iphone 5s will need to be repaired here. You should not immediately turn to the help of the Internet and study all the training videos, which show options for replacing individual parts of the phone. Without certain skills, it is almost impossible to complete all actions without making serious mistakes. Any attempts to save money most often only lead to additional spending.

Sticking of the volume control button can also occur due to a software failure. Sometimes restarting the device can help with this issue. But such an action does not always turn out to be salutary.

You can often find recommendations on the Internet regarding programs of questionable origin. According to connoisseurs of virtual space, such applications can help out in any situation. So, if a button is stuck on the phone, the user is offered to download a program that can completely disable this control. Thus, it remains possible to control the sound only with the help of the display. The effectiveness of such a solution raises deep doubts. After such innovations, it will be very difficult to return the phone to its former capabilities even in a service center.

You should never delay repairing your smartphone. If you have the slightest problems, it is better to immediately contact the specialists who can recommend the best options.

Volume buttons stopped working on iPhone? This problem causes a lot of inconvenience in the process of using the device. Below are detailed descriptions of the volume key repair process.

Possible causes of breakdown

Contaminated keys are common, but the most common cause. Over a long period of time using the phone, fine elements, dust, etc. can get into the holes between the keys and the body. Due to contamination, the keys work, but they are pressed 2-3 times. To clean the buttons, it is better to use an alcohol solution and a cotton swab;

The button may not work correctly after replacing the top motherboard cable. This is due to the inaccurate connection of the loop (the volume up / down contacts could be closed). In this case, only changing the keys will help;
Virus software that interferes with the operation of certain functions of the operating system;
The appearance of a malfunction after the impact or fall of the IPhone - this requires replacing the volume increase mechanism;
The presence of liquid in the body;
Crash after OS update.

The key is pressed, but the volume is not adjustable

Check for available updates. A new build of configuration parameters solves the problem in 90% of cases. Also try rolling your phone back to factory settings.

Replacing volume keys

Prepare iPhone parsing tools (screwdriver set, plastic spatula, tweezers, suction cup, new volume up mechanism);
Open the device. Then detach the back cover from the display. Remove the Phillips screws shown in the illustration from the battery connector cap. Disconnect the battery cable and remove the battery;

Locate the volume control cable and remove its cap by unscrewing the screws shown in the figure:

Detach the top cable bracket from the phone;
Unscrew the screws with the bracket contacts;
Remove the contact holder;

Lift the connector of the volume control cable with the flat spudger;
Remove the following screws:

Remove the button switch mechanism with tweezers. At this stage, you can try to clean the component, perhaps it is not broken, but simply clogged;
To replace the keys, carefully remove them with tweezers. This tool prevents damage to the button membrane;