Articles and Lifehacks

This instruction will tell you how to use the Internet from your phone to your computer via USB - using a data cable and the appropriate settings on your phone and computer.

Windows 7 will be used as the base operating system, the settings of which can be easily adapted to both earlier and older versions.

Configuring mobile device settings

• First you need to set a certain configuration for your mobile device;
• You need to go to the settings section and there to the wireless networks section, enter “Modem Mode” and check the “USB” item;
• Next, you should turn off the running network screens and connect to the mobile Internet.

Date cable and drivers

Now we connect the data cable to the mini USB port of the mobile phone and to the USB socket of the computer.

In this case, in most cases, the necessary driver programs will have to be installed independently. Otherwise, they will need to be installed manually.

If everything is connected successfully and correctly, the screen will display a corresponding notification.

PC Settings Configuration

Next you need to configure the PC:

1. To do this, you need to go to the “Control Panel” (Start menu) and set its viewing mode to “Large icons”;
2. Then enter the “Modems and Phones” section, where a request may appear specifying the geographic location (here you can write anything you like and click confirmation);
3. After this, the required “Modems and Phones” directory will become available, from which you can go to the tab with modems;
4. Here you need to find in the proposed list the model of the mobile device you are using, which in this case acts as a modulation/demodulation unit, and by activating it go through the “Properties” section;
5. In the directory that appears, you need to go to the section for additional communication parameters and enter the following code in the initialization line: AT+CGDCONT=1,"IP","internet";
6. Now you need to close all open windows (OK) through confirmation, except for the main setup window, in which you should go to the “Sharing Control Center”, and from there to “Settings for a new network connection”, selecting the connection settings via phone option;
7. Then click “Next” and select the desired modem from the proposed list, after which a form for entering data will open;
8. Here you do not need to specify a password and username, but only the name of the operator used, as the connection name, and telephone number;
9. Now you only need to activate the connection with confirmation and, after it has been successfully established, you can click on the network overview button, after which the default browser with a functioning Internet should open.

All. Connection to the network via your phone is successful.

On each individual phone there may be software differences in the menu from those indicated in this manual, but they will all be intuitively similar.

If the connected phone uses more than one SIM card, then the Internet connection will come from the card of the first value.

The APN must be specified correctly in the settings, and the tariff must allow connection to the network.

Prices for mobile Internet in 3G and 4G networks have almost come down to earth from sky-high heights and will soon be expected to equal the cost of traditional cable communications. And then, you see, they will completely supplant it, because using the Internet, which you always have with you (in your cell phone), is much more convenient than being tied to its stationary source.

Switching from landline Internet to 3G/4G is a matter of a couple of minutes. It is enough to have an agreement with a cellular operator (access to the global web is included in almost any tariff plan today) and a certain amount on your balance. Well, the mobile phone itself, which will be the connection point.

Let's talk about how to connect the Internet to a computer using an Android smartphone as a modem.

Phone as a modem via USB cable

Connecting to the Internet through a phone connected to a computer via a USB cable is perhaps the easiest way. This method is convenient because it does not require settings and does not require measures to protect against hacking and unauthorized access, like wireless communications. The connection is established in a matter of seconds and works almost flawlessly, of course, provided there is a good cellular signal and a high-quality USB cable.

Procedure:

• Go to the "Settings" application (in older versions of Android - "Options"), open the wireless networks section, go to the additional wireless network settings (in my example, they are hidden behind the "More" button).

• Turn on “Mobile data”, that is, connect the phone to the 3G/4G Internet network. Or do it in another way - by pressing a button in the curtain, etc. On different Android smartphones, this and subsequent actions are performed slightly differently, but the essence is approximately the same.

• While in the advanced wireless settings, open the “Modem Mode” section. Move the “USB tethering” slider to the “Enabled” position.

The setup is complete and the connection is established. Your computer is now connected to the global network via a USB cable and the mobile operator's network.

Bluetooth modem on your phone

If you want to connect devices equipped with a bluetooth module (laptops, smartphones, tablets) to the network, you can use your phone as a bluetooth modem. To establish a stable connection, client devices should be located no further than 8-9 m from the phone, but best of all - in close proximity. Also, make sure that the Bluetooth adapter is activated on all devices.

The procedure for connecting to the Internet via a Bluetooth modem on your phone:

• Turn on 3G/4G Internet on your phone.
• Go to the Settings app - Wireless & Networks. Slide the Bluetooth slider to the On position.

• Go to the “Bluetooth” section and select from the “Available devices” list the device to which you want to provide access to the World Wide Web. If there are several of them, establish the connection one by one. When windows appear asking for permission to pair, check the code and click the “Connect” button on both devices to be connected.

• Open the “Modem Mode” section in the additional wireless network settings and turn on the Bluetooth modem.

Now your gadgets have access to the global network. By the way, you can simultaneously continue to use your phone as a modem connected to your computer via USB.

Creating a Wi-Fi hotspot on an Android phone

To connect the Internet to a laptop, tablet, smart TV and other devices that are located in different parts of the apartment, it is most convenient to use Wi-Fi. And our smartphone will again be the access point and modem.

The procedure for setting up an access point and connecting to the Internet:

• Turn on the Wi-Fi module and 3G/4G Internet on your phone.

• Go through the additional wireless network settings to the “Modem Mode” section. Tap the Wi-Fi hotspot line.

• In the “Wi-Fi Access Point” section, move the slider shown in the screenshot to the “Enabled” position. Before connecting devices to it, you need to make a few more settings.

• Tap the “Save access point” line. In the window that opens, select the appropriate option. To save battery energy, it is optimal to turn it off after 5 or 10 minutes of inactivity. If the phone is constantly connected to a power source, then the access point can be saved forever.

• The next setting is the network name, encryption method and password. The name (by default it usually repeats the name of the phone model) can be anything. The best security (encryption) method is WPA2 PSK. If you are going to connect an old device, for example, a laptop with Windows XP, to this access point, choose WEP protection. Next, set a password that users will enter when connecting client devices, and save the setting.

• To communicate with devices equipped with a WPS button, you can use the same function on your phone. First, click WPS on the client device, then click the “Connect” button shown below on the phone.

After this, your gadgets will have access to the World Wide Web via Wi-Fi. By the way, if you wish, you can use all 3 types of connection together, but with a very intense load on the network modules, the phone will heat up (which is clearly not good for it) and, despite being powered from the computer via USB, it will quickly use up battery power. Therefore, it is still not worth loading it to the maximum. For such cases, it is better to use a traditional cable Internet connection.

Do you want to know how to consistently earn money online from 500 rubles a day?
Download my free book
=>>

At the moment, very often mobile Internet is unreasonably expensive. In this regard, if you have high-speed Internet at home and a smartphone on the Android platform, you can connect via a USB cable.

But first you will need to carry out some manipulations with your personal computer. Also, if necessary, you need to find and install a special driver that is suitable specifically for your smartphone.

This must be done in order to. If it is already installed, then when you connect the phone to the computer, a system window will appear. In it, the user, if necessary, can view the files stored on the smartphone.

Having checked the availability of the necessary driver, we begin working with the PC:

1. First you need to go to “Local Area Connection”. As a rule, the icon for this system window is located in the lower right corner of the screen.
2. In the new system window, right-click on the current connection and go to “Properties”.
3. After that, select the “Access” section and mark the line where it says “Allow other network users to use the Internet connection.”

To solve the question of how to connect your phone to the Internet via a computer via a USB cable, you will need to install a special application, which in this case will act as a link between the mobile device and the PC.

Android Debug Bridge

The simplest option for connecting a mobile device to the Internet via a PC is to install Android Debug Bridge. After downloading, the program must be unzipped.

You will also need to enable debugging mode using a USB cable. To do this, you will need to become a smartphone developer. I’ll say right away that it’s not difficult.

To get developer rights on your smartphone you need:

1. Go to your phone settings and select the “About phone” or “Phone” section (it may have different names, since it all depends on the smartphone model).
2. Then look for the line where the build number is indicated, click on it 10 times.
3. After this, in the settings you will have a new section “Developer”, “For Developers” or “Developer Options”.

After this, you can activate USB debugging. Now let's return to the program itself. Once you unzip it, find and open the AndroidTool.exe file.

Then a new system window will appear in front of you, in it you need to click on “Refresh”. Next, select “Select DNS to use”, check “DNS” and click on “Connect”. As a result, a window with a running connection line will appear in front of you.

If the connection is correct, the “Connect Done” entry should appear in this window. This will mean that your personal computer can be used as your smartphone.

In this case, an entry may appear on the phone asking for rights for the user. Don't be alarmed, just click on "Allow" and that's it. It is noteworthy that in this case root rights are not required.

AndroidTool

To solve the question of how to connect your phone to the Internet via a computer via a USB cable, you can use the “AndroidTool” utility.

Also, there is a very important point here, in this case it is absolutely necessary. To do this, you will need to install the “Kingo Android Root” application on your personal computer.

After this, you need to enable USB debugging mode on your mobile device. You also need to enable permission to install applications from unknown sources.

Now we connect the smartphone via USB and turn on the previously installed application on the PC, which will independently install the required drivers on the phone.

Once the driver installation is complete, a red button with the word “Root” will appear. Click on it and wait for the work to finish. As soon as everything is finished, the program will ask you to reboot your smartphone.

Now you can safely install and work with the AndroidTool application. After launching it, in the “Android Reverse Terthering” window, click on the “Refresh” button.

Then find your device using the “Select a device” field. Next, select “DNS” and click on “Connect”. In the “Select DNS to use” list, open the “Progress” window.

The following message will appear: “Request for superuser “USB tunnel”. If you need to provide root rights, you need to click “Grant”. Thus, a message should appear stating that “Connection has been established.” After this, you can safely use the Internet.

Bottom line

If you are interested in how to connect your phone to the Internet via a computer via a USB cable, then, as you can see, it is not as difficult as it might seem at first glance.

In addition, this option is convenient in situations where... It is worth noting that this article presented applications that are popular among users. I wish you success!

P.S. I am attaching a screenshot of my earnings in affiliate programs. And I remind you that anyone can earn money this way, even a beginner! The main thing is to do it correctly, which means learning from those who are already making money, that is, from Internet business professionals.

Get a list of proven Affiliate Programs in 2017 that pay money!


Download the checklist and valuable bonuses for free
=>>

The ability to connect to the Network in this way is regulated by the functionality of the device. Before getting down to business, you need to study some of the nuances and features of this option for each specific gadget.

USB modem - Internet without problems

Mobility has become the basis of modern life. Almost all modern mobile devices have the technical ability to access the Internet, which means they can easily replace their stationary counterparts. This is why compact and easy-to-use USB modems are becoming increasingly popular. They allow you not only to establish a stable connection, but also to save money by using the Internet at a fairly affordable price.

Externally, a USB modem looks like a regular flash drive. It is small, especially compared to modems used on desktop personal computers. Thanks to this device, you can go online whenever you want: on the street, at home, in the office, in transport.

You can buy a modem at any communication store of any operator. They are sold everywhere. After purchasing, you do not need to wait for connection; you just need to insert the device into your laptop and you can start working.

What is special about connecting via a USB modem?

When you connect the modem to any mobile device, the driver installation program starts automatically. Connection settings are also made autonomously and do not require intervention.

This will take some time, after which a message should appear on the screen stating that all necessary operations have been completed and the gadget is completely ready for use.

Even during such a simple process, difficulties can arise. For example, disabling autorun. In this case, all settings will have to be made manually. How to do it?

1. Through the menu, going to the “My Computer” section, you need to find the operator whose modem you are going to configure. By clicking on the icon, you will launch the installer program. Next, you will be offered various settings options; you need to select and confirm the ones you need. If manual configuration is not possible, you need to contact the operator’s support service or go to its website. As a rule, the menu already has a separate section dedicated to installing and activating the modem.
2. It is important to know! The modem cannot be removed from the connector until the automatic installation and configuration process is completed.
3. Once all drivers are installed, launch the program. If everything is done correctly, a connection button will appear on the screen, by clicking which you can safely use the Internet.

How to connect a smartphone to the Internet via USB?

This is where things get a little more complicated. The role of the modem in this case will be performed by a personal computer equipped with a USB port.

In addition to special cords, in order to use USB, you will need special superuser or root rights.

There are no rights to Android - you will have to first study the algorithm for obtaining them. Step-by-step instructions are freely available. Let's assume that you have already received the rights.

• If you have a Windows operating system installed on your personal computer, you need to download and install the Android SDK. In the computer menu, select “Network Connections”, “Network Connection” item. This item contains property settings.
• In the sharing section, you need to allow other users to use the Internet connection of the PC itself. And confirm your choice.
• You need to go back to your tablet or mobile phone. Select the item intended for developers in the “Settings” section and start debugging the Internet on your phone via USB.
• Don't forget to connect your tablet to your computer and download the proposed archive to your hard drive. After unpacking, you can run the AndroidTool.exe program.
• We activate the search for connected devices and start the connection.
• Attention! The installed application may require superuser rights - provide them.

Once all stages are completed, the personal computer will be ready to distribute the Internet to devices running Android OS. That's all you need to know about how to share the Internet

What if you need the Internet where there is no Wi-Fi access point or dedicated Internet line? This is especially true for those who travel a lot or often go on business trips for work.

There are several options here:
1. Buy a 3G modem from any mobile operator.
2. Use mobile Internet through a mobile phone.
3. Use 3G mobile Internet via a smartphone with a wi-fi module (90% of smartphones since 2012).

First option can be used if you do not have a mobile phone that supports GPRS or EDGE connections. Usually these are phones produced before 2005. But this option is not cheap! You need to buy a 3G modem and pay a monthly subscription fee for the Internet.

Second option more interesting. It is important here that your phone supports GPRS or EDGE connection. In this case, you don’t need to pay anything extra, because... Mobile operators usually include a certain number of free megabytes of Internet in any tariff package. As a last resort, you can choose a tariff package that definitely includes free or inexpensive megabytes of Internet.

I’ll tell you how to turn on the Internet on a computer using a mobile phone using the example of a Samsung C3322 Duos phone. This phone has everything you need to use the Internet directly from your phone or connect to the Internet on your computer using it. It doesn’t matter whether it’s a desktop computer or a laptop.

My goal was to connect the laptop to the Internet via a mobile phone, using a computer-phone connection via BlueTooth (bluetooth), so as not to bother with wires.

Now step by step how I connected my computer to the Internet via a mobile phone using a BlueTooth connection.

1. Check the Internet connection settings on your phone. To do this, you can send an MMS. If it is sent, everything is in order, there is a connection. If it is not sent, you need to call the operator and get settings from him via SMS and set these settings.

2. Turn on BlueTooth on your phone. In my case, the path on the phone is as follows: Menu – Applications – BlueTooth – Options – Settings – Enable/Disable BlueTooth

3. Enable BlueTooth on your computer. On my laptop, BlueTooth is turned on using the Fn+F3 key combination (an antenna icon or specifically a BlueTooth icon can be drawn on the BlueTooth power button). If your computer does not have a built-in BlueTooth adapter, you can buy it separately and connect it via USB.

4. When BlueTooth is turned on on the computer, a BlueTooth icon will appear near the clock (lower right corner of the desktop). At the same time, additional drivers for the BlueTooth modem will be installed.

5. Click on this icon with the RIGHT mouse button and select “Add device”. Next, follow the instructions of the Add Device Wizard. During the search process, the phone may ask for permission to connect to the computer, pay attention to this and click on “Allow” or simply “Yes” on the phone.

If the Wizard did not detect your phone, then check whether BlueTooth is turned on on your phone, place the phone closer to the computer (range of up to 10 meters), check in the START menu - DEVICES and PRINTERS (for Windows 7) maybe your phone has already been found earlier.

6. Go to the START menu - DEVICES and PRINTERS (for Windows 7), if the Wizard does not automatically transfer you to this panel after the search.

7. Click with the RIGHT mouse button on the picture of the found phone.

8. Select “Dial-up connection” - “Create a dial-up connection...” (for Windows 7).

9. Select any modem from the list, usually the first one in the list.

10. Enter the phone number, usually *99#, you can find out more precisely from your operator or look it up on the Internet using the search. “Username” and “Password” are usually not filled in; this can also be checked with your operator. Next, we call the connection as you wish - it’s just a name.

11. Click the “Connect” button. The wizard will create the connection. Please note that the phone may ask for permission to connect - click “Allow” or simply “Yes” on the phone. If the wizard displays an error message, a connection may already be established to the selected modem, you just need to select another modem in the list - repeat steps 7-10.

12. That's it. You can access the Internet, which the Connection Wizard will prompt you to do. For the next connections, select the desired connection (via phone) through the “Network Connections” icon near the clock, in the lower right corner of the desktop.

ATTENTION!!! If for some reason you need to delete an unnecessary connection, go to START, select “Run”, write ncpa.cpl this is a panel Network connections , which for some reason is hidden in Windows 7, and here you can already delete or rename connections. Use the RIGHT mouse button on the selected connection.

Thus, using your mobile phone, you can easily connect your computer to the Internet where it is not possible to connect via a dedicated line or Wi-Fi connection.

Third option- this is to turn your smartphone into a router or access point. Accordingly, your smartphone must have either 3G Internet or regular mobile Internet.

So, open the top panel of your smartphone or tablet and turn on “Wi-Fi Access / Wi-Fi Direct” (you need to hold your finger a little for the settings to open).

Save the settings and open Wi-Fi connections on your computer (antenna in the lower right corner). Select your network from the list and connect by entering the password that was in the settings or the one you came up with yourself.

That's it, now the Internet works on your computer!