All ways, as in the "Word", put square brackets. Putting curly braces in Microsoft Word How to insert large brackets in a Word

Do you know how to put square brackets in the Word? If yes, then you still will not name four ways of how to do this, but they exist. It is about them that the conversation will go in this article. We will consider the most trivial methods, and the most sophisticated - those that few people will use, but still they are. As they say, just in case.

We use a standard keyboard

The way everyone knows is to use the appropriate keys on the keyboard. It might not have been included in the article, but for users who are just starting to master the computer, it is necessary to recognize it. Therefore, we will now tell you how to put square brackets in the "Word" using the keyboard.

Looking at it, you can find the square brackets icon on the Russian "X" and "b" keys. Obviously, pressing these keys while the Russian language is selected in the system, you will not achieve anything - the corresponding letters will be printed. The trick lies elsewhere. You should change the system language. Who does not know, this is done by pressing the keys ALT + SHIFT or CTRL + SHIFT (depending on the system itself). If this option seems difficult for you, then you can change the language by clicking on the corresponding button on the taskbar. You can see its location in the picture.

After the system is set to English, you can safely press these buttons. So you learned how to put square brackets in the "Word" using an ordinary keyboard. Well, now we move on.

Using special characters

Now let's figure out how to put square brackets in the 2007 "Word" using special characters. Of course, this method can work on other versions of the program, but an example will be given on the indicated one.

Initially, you should open the appropriate window in the "Word". To do this, initially go to the "Insert" tab. In it you need to find the "Symbol" button. It is located on the right side of the tape. By clicking on it, you will open a menu in which you need to select "Symbol".

So, the required window is open. You need the place in the drop-down list, which is named "Set", select "Basic Latin". After that, symbols from this category will appear in the main window field. Scrolling down the table, find the necessary ones and select them. After that click the "Insert" button and they will be printed in the document.

Now you know the second way to put square brackets. By the way, in the 2010 Word, this method works according to a similar principle.

Using hexadecimal code

Now we will tell you how to put square brackets in the "Word" using a hexadecimal code. This method, rather, belongs to the category of sophisticated. Now you will understand why.

Here is the hexadecimal code of the character "[" - 005B, and here the character "]" - 005D. As you can see, it's pretty easy to remember them. Now we will tell you how to use them.

In order to insert square brackets into the text using this method, you need to enter this code into the text itself, and then press the ALT + X key combination. You can try this right now, after such an operation your code will turn into the symbol you need.

We use formulas

By the way, when you opened the table of special characters, in the drop-down menu, next to the "Symbol" button, there was a second icon - "Formulas". Now we're just going to talk about how to insert square brackets by entering formulas.

This method is unlikely to be used with normal typing in a document, but if you want to write a formula into it, then it will come in handy.

So, as soon as you click this button, the form for entering the equation will be inserted into the text, and the equation designer will open on the toolbar. In the constructor, find the "Bracket" button and click it. In the menu that appears, you need to click on the square brackets, between which there is a semitransparent square. After clicking in the document, this form will appear. Click on that square and enter the text - it will be inserted between the brackets

We use Alt-code

The article provided methods for the latest versions of the Word, now it's time to talk about how to put square brackets in the 2003 Word. Although this method works anywhere and even outside the named program.

The method is very simple: you just need to memorize the sequence. For bracket "[" it will look like a combination of three keys: ALT, 9 and 1, and for bracket "]" - ALT, 9, 3. Pressing them, you get the desired result.

Those who often use Microsoft Word to work with text documents probably know about the main features of this program, especially those that you have to use relatively often. It is much more difficult for inexperienced users in this regard, and difficulties may arise even with tasks whose solution seems obvious. One of these is the writing of curly braces, and today we are going to show you how to do this.

It seems that putting curly braces in Word is as easy as shelling pears, especially since these characters are drawn on the keyboard. But by clicking on them in the Russian layout, we get the letters "X" and "B", and in English - square brackets […]. So how do you get curly braces? This can be done in several ways, and not all of them involve the use of keys.

Method 1: Keyboard Input

So, we see the characters of interest to us on a pair of keys "X" and "B"... In order to get curly braces instead of them, you need to do the following:

Method 2: Insert symbols

Microsoft Word contains a huge set of symbols and signs that can also be inserted into documents. Most of them you will not find on the keyboard, but the curly braces we are interested in are also included in this "kit".

Method 3: code conversion

Even a cursory glance at the dialog interface "Symbol", you can see the point "Mark code", opposite which, after highlighting the character, a four-digit combination appears, consisting of only numbers or numbers with large Latin letters.

This is a code combination, knowing which you can add the necessary characters to the document much faster than it is done in the above way. After entering the code, you must also press certain keys, which will convert it to the desired character.

Conclusion

That, in fact, is all, now you know about all the existing methods with which you can insert curly braces in Microsoft Word. The easiest way to do this is from the keyboard, but using the built-in character set allows you to familiarize yourself with its contents and learn how to use it in future work.

here is the first one - (
here is the second one -)
in the Latin layout, they are still drawn, in that place are the Russians X and Kommersant
But this is everywhere, not only in the Word. In short, he answered the question.

Most likely, read-only mode is set.
Unfortunately, I don't have Microsoft Word at hand - I can't help it. Try to find a solution to the problems in a search engine (google: Microsoft Word read only, Microsoft Word cannot modify document).

(I prefer to use free software - OpenOffice)

2: You probably reinstall Windows too, when the sound does not work ( the mixer properties are set to Mute), or the picture on the desktop does not change? Do you like masturbation?
added: Viruses are a sign of curvature of the arms. Drova, viruses, Windows, "Link to moderation"... All clear.

Word 2d7?
Do

Vasya
Peter

Washu in Heading 1
Petya in heading 2

You number them, you get

1. Vasya (heading 1)
2. Petya (heading 2)

You click in front of Petya directly, press Tab.

Becomes

1. Vasya (heading 1)
1.1. Petya (heading 2)

You highlight wasya, you say to the Word "this is how Heading 1 should look from now on."
You highlight the pet, you say to the Word "this is how Heading 2 should look from now on."

It seems to work.
I wrote without opening the Word, so it's not a fact: D

Make it in the form of a table, just paint the sides and tops white. And voila.

Format -> Bullets and Numberings!

While working in Word, the user often resorts to different tricks and quick ways to solve the existing problem. In a text editor, symbols can be inserted in several variations. In our case, there are several ways to put parentheses in the Word. After all, it is often necessary to enclose fragments of text either in square brackets or in curly brackets. Therefore, we will sequentially analyze all the options.

Square brackets

To insert a square bracket, use the following methods and steps:

Method 1: by means of Russian letters

Initially, you need to put the mouse pointer in the place where the parenthesis should open. Next, check the keyboard layout (there must be an English layout - you can turn it on with the Shift + Alt key combination). Click on the Russian letter "x" - an opening bracket "[" will appear, and to close, click on the letter "ъ" - the bracket will be closed "]".

Method 2: Symbols

Using the well-known "Symbols" function, you can insert square brackets. Here's what you need to do this:

Method 3: using the sign code

If you open "Insert" - "Symbol" - "Other symbols" and in the window that opens, click on the bracket, we will see the code of the sign. The picture below shows everything.

You can use the code like this:

Braces

This type of brackets can be placed in the following three ways:

Method 1: keyboard shortcut

First, change the letter input method to "English";
Hold down the "Shift" button and press alternately the Russian letters "x" and "ъ".
(It should look like this).