Does the iPhone 6 camera glass scratch. Why does the iPhone display scratch so easily

Appearance problems now and then haunt Apple smartphones. The metal back of the first iPhone scratched almost faster than the owner had time to figure out how the revolutionary gadget works, the plastic cases of 3G and 3GS were easily scratched, and cracks appeared near the connector. The glass on both sides of the iPhone 4 and 4S also quickly lost its presentation due to imperfect anti-scratch technologies at that time. Peeling paint on a bevelled edge in early batches of iPhone 5s has become one of the most notorious problems with Apple smartphones, as the coating wears off literally in the very first days of use. The iPhone 5s had the least problems, which felt beefy compared to its predecessor, and few people discussed the damage resistance of the iPhone 6 and iPhone 6 Plus, as after that people were carried away by unplanned body curves when carrying a smartphone in narrow pockets.

At iGuides, we decided to catch up and talk about what's happening with the look of the iPhone 6 and iPhone 6 Plus after a few months of use. And most importantly - do they need some kind of protection and what covers should you choose. Recently, the value of such information has grown significantly, along with the cost of smartphones in Russia. It will not be so easy to change the device at the end of this year, so I want to keep the presentation of the device longer. We had the opportunity to follow the fate of three gold-colored iPhone 6 and two gray iPhone 6 Plus, which were purchased at different times and used in different conditions. Golden-colored smartphones were worn in a pocket, with an Apple branded case and a Handwers pocket case. We carried the gray iPhone 6 Plus simply in our pocket and in the Apple branded case.

Silver-colored smartphones proved to be equally resistant to scuffs, scratches and damage. Regardless of the presence of protective accessories, they have perfectly preserved their appearance from the day they were launched. The situation is quite different with the golden iPhone 6 model - two out of three have lost their appearance as a result of rubbing against jeans and a Handwers pocket case. The marks are most noticeable on a smartphone that was used without a protective case, it was purchased on September 30, 2014, and its condition can be seen in the photos in this article. The iPhone 6, which was constantly taken out of the case during use, also rubbed a little, but so far it is not so noticeable. However, it was bought recently - on January 14, so after a few months of use it risks being compared in appearance with a device that was worn without a case. The only golden "six", which retained its presentation, was in a branded Apple case.

According to him, he purchased one of the screens and subjected it to a series of physical attacks, including being stabbed and stabbed with keys.

What is sapphire crystal

Artificial sapphire is a hard transparent material, which is a product of aluminum oxide crystallization at high temperatures. While the material is hot, it can be cut into wafers using diamond-tipped saws.The resulting plates are cut into the desired shape and polished.Due to its scratch resistance, sapphire crystal is a traditional watch material.

This material is already used in the iPhone 5S, where it protects the camera and Touch ID.

In the future, sapphire glass can become a replacement for the popular Gorilla Glass today.

Marcus Brownlee said he received the screen from Sonny Dixon, who specializes in leaks from Apple. He noted that despite all attempts to spoil the screen, he did not succeed. In addition, the glass is of high quality and does not allow color distortion. Brownlee noted in his review that the screen is "paper-thin".

The screen in the video has a diagonal of 4.7 inches, which fuels rumors about two versions of the iPhone 6 - with displays of 4.7 and 5.5 inches, respectively. Reports that Apple was experimenting with sapphire glass appeared last year, but rumors have it that the technology was deemed "impossible".

Sapphire glass is significantly more expensive than usual, which made us treat assumptions about its use in the new iPhone with great caution. But Apple recently announced a new mineral glass plant in Arizona. It will be a joint venture between Apple and leading sapphire glass maker GT Advanced Technologies. The new facility is expected to employ about 700 people.

GT Advanced Technologies noted that the agreement does not specify specific production volumes. An Apple spokesman, however, noted that the total number of new jobs associated with the plant in Arizona will reach 2,000.

Earlier this week, iPhone assembler Foxconn revealed that the iPhone 6 will be the first product to be assembled by its "robot workers." According to the plan, by the end of the year, the corporation should have up to a million assembly robots, which are currently undergoing final checks. One $25,000 robot can assemble up to 30,000 iPhones a year.

As long as Foxconn employs humans, not robots, the number of workers is 1.2 million across China.

About a month ago there was a presentation of new products from Apple. Today, the new iPhone 6S and its enlarged version are already on sale. And, according to the already established tradition, many video bloggers conducted crash tests of new items. For this smartphone model, this test is very relevant, since it was fall safety that was the “sore spot” of its predecessor.

The fact that the iPhone 6 could be bent without much effort really angered users. There was a lot of noise around the new model, many complaints were received from buyers and sympathizers towards Apple. This time, the developers and engineers of the manufacturer promised to fix the problem. Apple says they've fixed the bugs by using durable 7000 series aluminum and toughened tempered glass. But video bloggers sensibly reasoned - "Trust, but verify." And one of the first test drives was carried out on the Internet resource PhoneBuff.

In the video, we can see how the new and 6S Plus are thrown onto a stone surface from different heights. For both devices, the landing strength was tested for:

back panel;
edge or corner of the device;
display.

Flights from a height "at the level of the pocket" to the side or the back cover, both new items withstood adequately, minor abrasions and scratches on the case are not a problem. After all, only the outer painted layer was damaged. But falling flat on the display from the same height led to the fact that cracks went along it. It cannot be said that this is a bad result, because in both cases the screen remained in working condition, and a fall on an uneven stone surface does not a priori mean the integrity of the device. It is also worth noting that the screen of the previous smartphone model after such a fall not only crashed, but shattered into pieces and failed. So the claimed increased strength is not fiction. Indeed, the new iPhone 6S holds up well, especially when compared to its predecessors.

No less interesting is testing for the possibility of accidentally bending a new one. No one doubted that this flaw in the previous version would be fixed, but it still needs to be checked. The author of the video diligently tried to bend the smartphone, but the new durable aluminum and the thickness increased by 0.2 millimeters did not allow him to change the geometry of the case. Several attempts were made to implement the plan, but almost all failed. In the end, of course, it turned out to bend the unfortunate smartphone, but too much effort was made. In order to bend the new 7000-series aluminum case even a few millimeters, two adult men had to apply their strength, and they succeeded only on the third attempt. So you can be calm - in everyday life, the iPhone 6S and 6S Plus will not suffer. You can even carry it in the back pocket of your jeans - nothing will happen to it.

Protective accessories for iPhone 6S/6S Plus

Although Apple's new smartphones are much more durable than their predecessors, this does not guarantee their safety. This was quite clear from the previous two videos - there is a chance of accidentally breaking the screen or scratching the case when dropped. That is why additional protection for your new iPhone will still be needed. This will ensure maximum security for the device. And then the device will not be afraid of any falls - for many years you will be able to use the gadget, and it will still look like new.

Beautiful and comfortable cases for iPhone 6S and 6S Plus

In any case, for your new purchase, you will need a high-quality protective case - it will protect the corners from scratches and chips. This will help keep the beautiful appearance of your smartphone for a long time. After all, if the case is suddenly scratched, it will not be possible to replace it. So you should take care of protecting the device in advance.

You can pick up a special protective case in our Monkeyshop online store. Here you will not only securely “dress” your new electronic friend in good protection, but you will also be able to choose accessories for every taste:

Those who like to chat should pay attention to slip covers. They do not cover the smartphone display from the owner's fingers. Therefore, it will be much easier to answer a message that came in the messenger or quickly dial a number.
If the safety of the device from all sides is more important for you, you can pay attention to book cases or flips. They additionally cover the screen of the device with a special cap. Of course, this will complicate access to the functionality of the device, but it will be completely safe this way.
Do you like to play sports, but do you need a smartphone for music or monitoring your workout? The ideal choice would be cases-bags or special sports armlets. So you can connect the headphones to the device and do as much as you like. And the device will be completely safe.
Even if you like long hikes or do something extreme, our cases will be able to protect your device. It is enough to purchase a shockproof accessory - and the gadget will no longer face any dangers. The most reliable protection option is Lunatik TakTik cases. They are ways to keep your smartphone safe even in outer space.

How to protect the screen of the new iPhone - glass and films

After choosing, the owner of the device will definitely have a question - how to protect the display? Unfortunately, this is the most fragile part of the new gadget. Therefore, just like the body, she needs special protection. Even when buying a flip case or a book, it will not hurt at all.

Therefore, it is important to pay attention to two excellent products in our online store - tempered glass and thin film for the display. They are able to cope with the screen protection of the new iPhone 6S and 6S Plus with an excellent rating.

- special hardened . gently glued on a silicone base to the smartphone display. It has a hardness of 9H and can handle any impact. Even if the accessory itself breaks, the screen of the device will definitely survive;

- film is a less reliable option. But it also costs less, and is noticeable on a smartphone a little worse than glass. She also sticks to the screen, but she can’t cope with a sufficiently serious blow. But it perfectly protects the device from scratches and small chips. It is noteworthy that there can be several varieties. Including decorative.

This is a really important purchase: the crash test carried out showed that the screen can be broken by accidentally dropping the iPhone during a call. And replacing the display with a new one will be quite expensive. Monkeyshop always has a large selection of both films and protective glasses, and all of them are ready to reliably protect your new smartphone from any dangers and hardships. Do not delay buying quality protection for your electronic friend - and he will serve you for many years.

The number of complaints is on the rise, with frustrated owners of newly acquired gadgets complaining that they are too quickly becoming “thoroughly second-hand” devices. With last year's models, allegedly, this was not observed - many tend to blame the manufacturer for improperly selected materials.

Everything rests on time - getting used to the high build quality iPhone, users are discouraged by the degree of wear and tear of brand new phablets in just a week of operation. This is a common feature of all complaints, the first publications appeared on thematic portals around the 20th of September - a few days after the start of sales. It will not be possible to write off the negative phenomenon on the consequences of a wave of home crash tests, just those who take good care of their purchase are indignant. Old apple smartphones delight the eye with a smooth surface after years of work, the screens of new ones are covered with scratches in the corners, just lying in a bag - what's the catch?

If you try to blame Apple in the erroneous use of innovative materials, rumors about glass strengthened by "ionization" immediately come to mind. It is still not known for certain what kind of protection is installed on the displays and, the most plausible option is Corning Gorilla Glass 3, since dreams of sapphire. The notorious ionization, in theory, should just minimize the number of scratches, at least make them less noticeable to the naked eye. In this case, the situation is completely opposite and, apart from conspiracy theories and versions of deliberate sabotage, it seems that the cause of the problem is different.

Meticulous researchers have found similarities between scratches received from wearing iPhone 6 in a microfiber-coated case, and the results of learners' mistakes in the art of polishing. Little to do with long deep marks from a massive metal object, a knife or a key, the scratches seem to have been rubbed off as a result of a light monotonous impact. Here are the prerequisites for the development of a new theory - the smartphone screen does wear out at an unpleasantly high rate, but the coating material has nothing to do with it. The problem is the rounded body design of phablets, which is vulnerable to attacks from different angles.

In new iPhone the impromptu protection in the form of material framing the display disappeared. Let the thickness of the "side" is symbolic, but it was enough to reject external objects moving casually in relation to the body. Now the impact is taken directly by the rounded side face of the glass itself and the force application vectors are different. This is the alleged reason for the appearance of scratches - in these areas, the protective coating comes into contact with the external environment much more often than is permissible. What is pleasing to the eye and comfortable to the fingers may be harmless, but an unfortunate engineering miscalculation.

Alas, history Apple there have already been similar examples, and in the case of new phablets, one should not be surprised - the echoes of "" have not subsided yet. Official comments, as usual, have not yet been received from the company.

Either it seemed to me three times, or Apple is dark. I need your help.

For six months, three different iPhone 6s have been in my hands. Each time I noted the same thing: on them scratches appeared very quickly. shallow, but conspicuous in bright light.

From the second phone, I began to use cases and strictly watch where and how the phone is. It didn’t help - after three weeks I looked at the display and realized that the scratches had reappeared, albeit in other places. Then he just scored.

Now I'm looking at the third device, 6s Plus, and I see exactly the same problem. Something is wrong with the glass in the new iPhones, that's for sure. Neither the previous “fifth” nor the “sixth”, which I wore for more than a year each, had such large, easily noticeable scratches literally a week after purchase.

I have a simple theory, which you can help check.

Likbez: what kind of glass is put on iPhones

Apple is close friends with the company Corning, manufacturer Gorilla glass, the most famous type of glass for smartphones.

The iPhone has always had glass Gorilla glass, or its variations. Apple itself tries not to advertise the aforementioned brand, inventing other marketing names for glasses in devices. For instance, Ion-X. In fact, this does not change anything, it's just that Cupertino does not want to associate its products with the leading supplier for Android smartphone manufacturers.

Glass from Corning differs from the usual mass of parameters - in particular, during the manufacturing process it is subjected to chemical attack at the ionic level. The material becomes stronger, crumbles less when damaged. You can read more about this directly on Wikipedia.

Unlike any other component in the iPhone, the quality of the glass impossible to assess. It always looks the same. The difference lies in the chemical composition, processing methods, coating and in such trifles that even Apple itself may not be fully aware of. We are actually talking about the molecular structure, where any change can lead to both positive and negative consequences.

That is, to know what changed very hard. But it just doesn't happen like that.

What could cause Apple to "ruin" the glass

The moment I want to draw attention to. While writing the article, I came across a lot of forum posts from the year before last. Even full articles. People were outraged that the iPhone 6 was easier to scratch than the iPhone 5/5s:

That is, this trend did not even start now, but since last models. We just forgot about it.

Here are a few reasons for deliberate deterioration, which in the face of strict silence, Apple has to pull by the ears. Turn on analytics mode.

Firstly, display modules in the iPhone 5/5s did not rise above the body, but simply stuck into the metal frame and seal. Convex glass is really easier to hurt, and the company has nothing to do with it. Another option - Apple had to sacrifice the strength of the material in order to achieve those very rounded corners.

Secondly, Apple has been aggressively printing money for the last three years, raking in money through increasingly controversial methods (and products). When ordering new modules, Cupertino could be asked to save money, realizing that if someone notices this, then after the purchase. However, it is impossible to prove this, especially since the changes could have been made by glass manufacturers without the direct intervention of Apple.

Finally, thirdly, The iPhone 6s introduced Force Touch, a technology still of dubious utility. Recognition of the pressing force could require a decrease in the density / strength / hardness of the glass - which was done. If the deterioration of these parameters took place back in the iPhone 6, now the process is in the second circle. And then it is clear why we have a bunch of incomprehensible scratches on the iPhone, even in surgically clean conditions.

It's a shame that I can not prove any of the above points. Apple will never admit this, or just report that we are holding it wrong.

But there is idea.

iPhone 6 and 6s owners, go in the comments

We will answer Apple with harsh statistics and at the same time we will figure out where the truth is. If you have an iPhone 6 or 6s, including Plus - be a friend, write in the comments.

Look at your iPhone under bright light and say: