External. How to enter the CryptoPro serial number - Kontur.Extern Where to get a CryptoPro 3.9 license

If you have purchased a License for the right to use the CryptoPro CSP software, then you have seen the license agreement in paper form (A4 format). Please prepare it - you will need it soon.

Step 1.

Before proceeding with the installation of the program, we recommend that you check if you have an old version of CryptoPro CSP installed. You can do this in the following way:

1. Go to "Start" - "Control Panel" (or "Start" - "Settings" - "Control Panel");
2. In the window that opens, find the CryptoPro CSP snap-in.

If you not found the CryptoPro CSP snap-in, then proceed to Step 2.

If this snap-in is available, then run it and check the version of the installed program (the inscription "Product Version"). If the software version is higher 4.0.9963 , then you can proceed to install the following programs.
Attention! For normal work with a qualified electronic signature, the minimum required version of the program - 4.0.9963. Therefore, if the version of the program you have installed below4.0.9963 , follow the next step of the instruction.

Step 2
To install CryptoPro CSP version 4.0.9963 download its distribution kit from the official website of the developer - the Crypto-Pro Company. Go to the "Downloads" section in the top menu and select "CryptoPro CSP" from the list. To download the distribution package of the program, you must register on the site (requirement of the developer).

Download the distribution file CSPsetup.exe. This file is the installer for the new version of the program and the upgrade tool for the old version.

Step 3
Run cspsetup.exe and follow the installation wizard prompts.
At one of the installation steps, enter the serial number of the program (from the paper license form).

Step 4
Wait for the program to finish installing, then restart your computer.

If you have already installed the program in demo mode, or the annual license for the CryptoPro CSP program has expired, then to activate a new serial number, you must perform the following steps:

1. Run the program "CryptoPro CSP": for this you need to go to "Start" - "Programs" (or "All Programs") - "CRYPTO PRO" - "CryptoPro CSP".

2. In the window that opens, select the "General" tab and click on the "Enter license" button

3. Enter the requested data (user, organization and serial number) and click on "OK"

Program activation is completed.

In order to view the CryptoPro CSP serial number entered earlier, you need to:

1. Open the registry: Start - Run - regedit
2. Find the correct directory: HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Windows - CurrentVersion - Installer - UserData - S-1-5-18 - Products - 05480A45343B0B0429E4860F13549069 - InstallProperties.
for Windows 8 and higher: HKEY_LOCAL_MACHINE - SOFTWARE - Microsoft - Windows - CurrentVersion - Installer - UserData - S-1-5-18 - Products - 7AB5E7046046FB044ACD63458B5F481C - InstallProperties.
3. Find the line ProductID - this is the serial number

In connection with the transition to the new national standard for the formation and verification of electronic signature GOST R 34.10-2012, we recommend that you update your CryptoPro CSP Licenses versions 3.6 and 3.9 in advance. to the current ones, since these versions do not support the new national standard GOST R 34.10-2012, which is mandatory from January 1, 2019.

To check the need to update the CryptoPro CSP License, launch the CryptoPro CSP program. To do this, go to "Start" -> "Programs" (or "All Programs") -> "CRYPTO-PRO" -> "CryptoPro CSP".

In the window that opens, select the "General" tab, pay attention to the product version and the license validity period:

If the version of the CryptoPro CSP program installed on your computer is 4.0 or 5.0, and the license validity period is "Permanent", then everything is in order, you are ready to switch to a new cryptographic standard.

If the line "Validity period" contains date of or word "Expired", then you need to purchase a license and enter a serial number.

If you see "Permanent" in the "Validity period" line, but the CryptoPro CSP version starts at 3.6... or 3.9..., then you need to purchase a CryptoPro CSP version upgrade license, update the program on your computer to the current version and enter serial number.

Entering the serial number depends on which certificate is being used for the job. From the end of April 2014, Kontur.Extern subscribers can be issued certificates with a built-in license. A sign that the license is built-in is the presence of the "Limited Crypto-Pro License" line on the "Contents" tab in the public key of the certificate (see ).

If a certificate with an embedded license

The public key must be set to private (see instructions).

At the workplace, the Crypto-Pro version must be installed at least 3.6 R2 (3.6.6497). You can check the version of the cryptographic provider by opening the menu "Start" > "Control Panel" >

You do not need a valid seat license to use these certificates.

If the certificate is without a built-in license (purchased a serial number for the workstation)

First of all, you should find the appendix to the agreement “License to use the CryptoPro CSP software product”. It will contain a serial number, which must be entered using one of the methods described below.

If This app is not available, please contact at the place of connection. If you cannot find the contacts of the service center, you should contact technical support at [email protected] , indicating the essence of the problem and the TIN and KPP of the organization.

You can enter the license serial number using the diagnostics portal or manually.

Entering a license through the Diagnostics Portal

Log in to the service at https://i.kontur.ru/csp-license.
Press the "Next" button.
After the verification is completed, select "Install".
After installing the components, enter the license number in the field and click Enter.

The license is entered, the period of validity of the new license is indicated.

Manual license entry

The procedure for manually entering a CryptoPro license depends on the installed version of the crypto provider. You can check the version of the crypto provider by opening the menu "Start" > "Control Panel" > "CryptoPro CSP". The product version is listed on the General tab.

Below are the settings for versions:

To enter a license for CryptoPro CSP version 3.6, you must perform the following steps:

1. Select menu "Start" > "Control Panel" > "CryptoPro CSP" .

2. In the "CryptoPro CSP Properties" window, click on the "CryptoPro PKI" link.

In CryptoPro CSP 3.6 R3, the procedure for entering a license is greatly simplified. Instead of the “CryptoPro PKI” link, click on the “Enter license” button and enter the serial number from the form in the window that opens. Click "OK", the license entry is completed.

3. In the PKI console window, select the "License Management" item and open it by clicking on the icon on the left.

4. You need to right-click on the "CryptoPro CSP" item and select "All Tasks" > "Enter Serial Number".

5. In the window that opens, you must enter the serial number from the license form and click on the "OK" button.

To enter a license for CryptoPro CSP version 3.9, you must perform the following steps:

1. Select menu "Start" > "Control Panel" > "CryptoPro CSP".

To enter a license for CryptoPro CSP version 4.0, you must perform the following steps:

1. Select menu "Start" > "Control Panel" > "CryptoPro CSP" .

2. In the "General" window, click on the "Enter license" button.

3. In the window that opens, fill in the proposed fields and click on the "OK" button.

Good afternoon, dear readers and guests of the blog, today we continue to administer the cryptopro csp 4.0 cryptoprotection program, last time we solved the "installer service could not be accessed" problem and a blue screen with error 800B0001. Today we are faced with the task of find the license key in the installed Cryptopro csp 4.0, for example, on Windows 10. Previously, everything was simple, I went into the special "License Management" snap-in and that's it, I saw it right away, in the fourth version, the developers complicated everything, but we are already experienced computer users, and it's easy to bypass.

The most effective method to determine the cryptopro csp 4.0 license key code in Windows is through the Windows registry. It contains absolutely all the information about all installed programs, the registry can be compared with a catalyzed library, where everything is on the shelves. Open regedit and find the section there

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\

In this section there will be many folders with incomprehensible names in the form of numbers and letters in a chaotic sequence. Among the below you need to find the following values:

05480A45343B0B0429E4860F13549069\InstallProperties is cryptopro 3.9
7AB5E7046046FB044ACD63458B5F481C\InstallProperties is cryptopro 4

On the right side, you need to find the ProductID line, its value is the cryptopro license key, you can copy it and transfer it to another employee or reinstall the program on another computer using it.