How to cut from microsymbols we apply. How to make a microSIM or nanoSIM from a regular SIM card? How to make nano-sim out of micro-sim

If you have a modern phone, in particular an ultra-thin model, then you probably know that one of the features of such a device is the use of Nano- sim cards NS. These SIM cards are slightly thinner than standard Micro and Mini sim cards. Despite the fact that the size of the cards is different, the dimensions of the chip on all SIM cards are the same. Therefore, at any time, you can make a nano SIM yourself from an ordinary or micro SIM card. In almost all communication salons, such a transformation of SIM cards is done for money, albeit not large ones. I assure you, you are certainly capable of cutting a SIM card yourself. But, for those who are afraid to spoil the SIM card, we advise you to contact any communication salon for help.

Due to such a variety of SIM card dimensions, some operators sell transformer SIM cards. Which, by extrusion, can be adjusted to fit any of the SIM card slots.

Having bought such a transformer SIM card, you will need to break off a part of the size you need. The big advantage of such a SIM card is that its size can be returned back. The main thing is not to throw away the broken off part. You never know, suddenly you change your phone, which will not be a nano, but a micro or ordinary SIM card.

So, how to cut a SIM card for Nano SIM and not spoil it at the same time? I offer you two options.

Nano sim card template

I suggest you use two templates that will help you properly cut the SIM card to the size you need. The template will need to be downloaded and printed.

In order to efficiently and correctly cut a SIM card, you will need good and sharp scissors, a strong construction knife or metal scalpel, a nail file and a plane for working in the form of a plastic or wooden board. It is desirable that they are even.

First template. After printing this template, you need to cut it to size and stick it on your SIM card. After that, it is trimmed to fit a nano SIM card. If the edges turn out to be very sharp or crooked, a nail file comes into play, with which you can correct everything. But be careful not to damage the chip.

Second template. In order to cut a nano sim card using this template, you will also have to use a pencil and a ruler.

We print the template on an A4 sheet and put a SIM card on it. Using a ruler and pencil, draw lines as shown in the template. Now you can cut the SIM card along the drawn contour. But do it carefully, the chip cannot be damaged, otherwise the SIM card can be thrown away.

After the card is cut off, we install it in the phone and check its work. I am sure you managed to do everything right, and the sim card will work.

How to insert a nano-sim into a micro-sim, if the card and the slot do not correspond to each other in size? We will bring detailed instructions, which will help you deal with a small problem - do not worry, you will soon be in touch again and will be able to use your smartphone to its fullest with a brand new nano-sim!

Adapter

How to make a micro-sim out of nano if you bought a brand new smartphone? We carefully chose the color of the case, looked for a suitable case and headphones, but forgot to specify the size of the slot? Or vice versa, temporarily changed modern device on old phone?

Whatever the reason, a SIM card adapter from nano to regular or micro will come to the rescue! This is a special holder made in the shape of a card. bigger size allowing you to insert a nano-sim instead of a micro-sim. You can choose from two types of adapters:

Outline. The plastic mold with a hole is equipped with an adhesive label to hold the card;
Backed. The form is equipped with a plastic wall on one side for easy holding inside the smartphone.

An adapter that helps to insert a nano-sim into a micro-slot can be bought in an online store or a hypermarket of technology, in telecom operators' salons. The cost of the part is low - from thirty rubles to several hundred rubles.

Important! To correctly insert a nano-sim into a regular phone, you need to choose a high-quality device. Pay attention to the following parameters:

If the plastic moves freely inside the mold, abandon the purchase - the nano-sim chip will not be held in place by the micro-sim;
It is better if the card fits tightly, with some effort, into the micro-SIM holder.

Most often, a special sanding block is included with the adapter, which allows you to smooth out uneven edges.

If you can't get an adapter in a specialized store, you need to know about the analogs of solving the problem! Let's discuss a few tricks to help you get the job done.

Other options

Putting Nano-sim into Microsim in an old phone will be helped by a plastic adapter that comes with the card when purchasing. Remember when you squeezed plastic out of a special mold? Save it is the easiest way to get what you want effortlessly.

There is also a second option - let's discuss how to make an ordinary card from a nano-sim with your own hands and insert it. You can cut the holder out of scrap materials!

Stock up on plastic forms - this may be an unnecessary bank or discount card;
Take a sturdy knife or sturdy scissors, arm yourself with a ruler;
Carefully sketch the silhouette of the future holder and cut it along the lines.

Just in case, let's recall the standard sizes of three types of cards:

Standard (or mini) - 25x15 mm;
Micro-sim - 15x12 mm;
Nano-sim - 12.3x8.8 mm.

If you can't draw the shape yourself, take an old card and trace with a pencil! The finished slot should be carefully sanded to remove the "shaggy" edges - this will make it easier to insert the nano-sim into the micro-sim holder.

We discussed in detail how to install a nano-SIM card into a smartphone in a large slot - now you are armed actionable advice to help you deal with a small nuisance. Read, memorize and communicate without limits!

In the world of electronic technology, nothing stands still. Already, the micro prefix is not able to surprise any user of a mobile device. For this reason, over the past few years, it is nano technologies that have begun to gain popularity.

Now on sale there is often a sim card developed according to the nano standard... Operators cellular a special combination of three cards began to spread - standard, nano, and also micro. One, in very frequent cases, there may be a problem with replacing a regular SIM card or a micro SIM card with a nano SIM card.

This case can turn out to be very unpleasant for the user: going to buy a nano-type SIM-card is a rather pointless decision, and buying a device for a single SIM-card cut is too expensive.

In this article, we will tell you how you can make a nano sim card from a micro sim card at home.

How to properly cut a nano sim card

In order to make a nano version of a micro SIM card, the following components are required:

SIM-cards of the standard type - Micro;
Printer;
Double-sided tape or glue;
A4 paper sheet;
A simple pencil;
Scissors;
Rulers;
Sandpaper.

When each of the components is prepared, you will need to do the following procedure.

First, you need to print a template for future cutting using a printer. The printout is usually carried out on a paper sheet, which has A4 format, the scale should be up to one hundred percent. It is not necessary to use a printer with color ink in order to print. A black-and-white type printer may be quite suitable.
When the template is printed out, you will have to glue the sim card with glue or double-sided thin tape into a template of the corresponding type. When cutting a standard SIM card, the template will be of the middle type.
In the case of cutting out a micro SIM card, it is necessary to fix it in the template of the lower type, where there is an inscription characterizing the transformation of a micro SIM card into a nano type card. Thanks to the cut corner of the SIM card, you can correctly position the position in which the card is to be inserted into the device.
You will need to wait for a while until the glue dries. At this point, the user will have to draw lines according to the template. As writing medium the user can use a pencil or a regular marker.
After the performed procedure, you will have to separate the card that was glued to the template. After that, using scissors, the user must very carefully cut the sim card along the contours. It is recommended to use very thin scissors for this purpose.

Nano SIM card came into use in 2012 with the introduction of first iPhones 5S and iPad tablets 4 mini with Retina, without which the operation of these devices is impossible. Then it was not so easy to get it, and even now such a SIM costs money. Below we will look at ways to turn a regular phone into a nano SIM card using the tools that many can find at home.

A standard SIM is not much different from a nano SIM. The chip itself, on which the information is stored, has not changed, which is the most important thing. We will turn an ordinary SIM into nano using the following tools:

vernier caliper (normal or digital) - a device for accurate measurement values, you will need to measure the difference between the cards and designate the marks by which we will cut;
if there is no caliper, a ruler, a sheet of paper and a pencil;
sandpaper or file - for grinding the edges of the cut SIM-ki, in order to reduce the thickness of the original card;
very sharp scissors.

SIM card sizes:

nano SIM-card: width - 12.3 mm, height - 8.8 mm, thickness - 0.67 mm;
micro SIM-ki: width - 14.9 mm, height - 12.03 mm, thickness - 0.81 mm.

Comparing these values, it is clear that the difference in parameters is small, and it is quite possible to eliminate it with the help of scissors.

We take a caliper, set the parameters of the nano SIM-card on it in turn: width and length. And we transfer it to a regular SIM-ku, noticing the lines along which we will cut with a pencil, and also do not forget to measure and notice the cut.

If you do not have a caliper, then proceed as follows:

we take a sheet of paper, a ruler, a pencil;
using a ruler as a measuring device, draw a nano SIM card template on paper;
cut out this template;
put on top of the micro SIM-card, carefully trace the outline of the template with a pencil.

Before cutting the main SIM card, it is recommended to practice on old micro SIM cards, as one careless movement can cost you a hopelessly damaged SIM card. When cutting off excess edges, try to touch the chip and contacts as little as possible. Your goal is maximum accuracy in resizing the micro SIM. If you are not sure that you can cut the card, then the Chinese manufacturers have provided for the need to adapt a micro SIM card to a nano SIM card and have invented a special cutter to remove excess from a regular SIM, this is how it looks.

Now the most difficult thing remains: to eliminate the difference in the thickness of SIM-cards, which is equal to 0.16 mm. Before starting the procedure for thinning nano SIM-ki, we advise you to wear a medical mask, since the dust formed during grinding has a rather unpleasant smell and texture. We take sandpaper or a file and carefully, slowly, grind the card on the back of the contacts (where the picture is). If you overdid it with reducing the thickness of the micro SIM card, place a sheet of plain paper under the adapted nano SIM card.

Before resizing the micro SIM, it is recommended to watch the training videos on the topic of adaptation regular card to nano format. Also, before starting work, you must keep in mind that a changeable micro SIM card, as well as all the information that is on it, can be lost forever.

Content

Each mobile device works with the network through a special card with a chip, which is popularly called "Simka". The chipset contains information through which communication with the operator and the provision of services, storage of a small amount of data occurs. Now they produce several SIM formats, which differ in size.

What is a nano sim card

Each owner bought himself a package from MTS, Megafon or TELE2 in order to use communication services. All owners had to get to know what a nano SIM card means first iPhone models older than 4th. The new smartphone used a completely different card format, which was named NanoSim. The innovation was connected with the fact that the iPhone became 20% thinner and the manufacturer was looking for ways to reduce the content. The standard connector was replaced with a narrower one, and nanosimics began to be used instead of MicroSIM.

Residents of Moscow and other cities of Russia were not ready, the operators did not have time to release new types of cards, so many needed to cut a SIM card for a nano SIM. Old cards simply did not fit into SIM card slots (even MiniSIM and microsim cards). All other smartphone makers followed the giant's example and copied the new format to also reduce the thickness of the device.

Micro sim and nano sim - the difference

The most important difference between nano sim and micro sim is size and thickness. The chip also works well, no innovations in communication technology or data transmission, just smaller parameters made it possible to make the iPhone even thinner. Only users who decided to upgrade to new smartphone from Apple, and from operators, because the main claims regarding the size of the SIM were addressed to Beeline, MTS and Megafon. However, this complexity did not stop people for a long time, because the difference in parameters is small, for example, microsim - 12x15 mm, and nano-sim - 9x12 mm.

How to cut a sim card for a nano sim

Those who just bought a brand new iPhone did not want to wait, and an urgent question arose: how to cut a micro SIM card for a nano SIM? The SIM cards have the same chip size, and the main problem was the amount of plastic around the edges. To reduce to nano format, you can do the following:

perform circumcision yourself;
take it to the workshop where there is necessary tool;
send to salon mobile communications and request a replacement card.

How to make a nano sim out of a micro sim

If you don't want to go or go anywhere, you can try to reduce the size of the SIM-card yourself. If you have a printer, scissors and double-sided adhesive paper, there is a proven way to cut a micro SIM card for a nano SIM. It should be remembered that during the trimming it is possible to get a non-working SIM card out of a working SIM card. All actions you perform at your own peril and risk. You will need:

double-sided tape (glue can be used, but this option is worse;
micro or standard sim card;
printer and paper;
ruler;
pencil;
scissors (or nail clippers);
sandpaper.

The rules for pruning will not differ depending on the gadget, phone or tablet from Apple. In order not to cut off extra millimeters and not to touch the circuit, you will need a nano format sim card template, you can easily download it. Next, you need to do the following.

Print the downloaded template, you do not need to change the scale or position of the drawing. Color printing is not required, regular black and white is enough. It is important that the drawing is just clear.
Use scissors to cut the template to fit your card. Inside the picture, the parameters for the nano-sim card will be indicated.
Glue with tape / glue to the side of the SIM card on which the operator's logo is written (the chip should not be exposed to any influences). Focus on the cut corner of the pattern, which will prevent you from going wrong with the correct sides.
Wait for the glue to dry (not required in the case of tape), carefully cut off the excess plastic along the lines of the template. If the scissors are not sharp enough, use a nail clipper.
Remove the sticky piece of paper from the sim card.

Do not worry that the cut lines will pass in the immediate vicinity of the chip, this will not affect the performance of the micro-sim in any way if you do not purposefully touch it. Use sandpaper to round off the edges, grind off any rough edges from the plastic. If from any side the card will be difficult to enter, grind it down a little more with sandpaper.

How to make a nano sim from a regular one

The exact same method that was described above is suitable if you have a question about how to make a nano sim from an ordinary SIM card. Please note that older models of cards have a larger chip, so you will have to remove almost all the plastic around the circuit. Remains should be wiped off carefully with emery paper or a nail file. Another subtlety of old sim card models is thickness. New format became not only small, but also thin, therefore, in addition to the four sides, you will have to undermine the back side, where you have Megafon or MTS written.

Another option is to buy a special device in the online store that cuts the card to the required size. Outwardly, it looks like a stapler, a regular SIM is put inside, the handles are gently pressed and all unnecessary is cut off in one click. The tool can cut Micro or Nano format. Exactly the same devices are used in liaison offices and mobile salons. The tool is inexpensive, but it makes no sense to buy just to reduce 1 card.

Nano SIM card adapter

This standard size is used only in new smartphones and gadgets from Apple. If at some point you took an older model phone, then you will need an adapter for a nano SIM card. This is a special adapter in which the card is placed and it is tightly fixed in it, increasing. The cost of such an adapter is very low. Then you just insert the adapter into the phone and use it.

Where to change a regular SIM card to a nano

If you do not risk cutting your standard SIM, then it is better to exchange it for free for a new version with your operator. This is the only sure way where to get a nano sim with your number. Operators offer you to exchange for another card. You just need to come to the post office, take with you:

passport;
contract;
old map.

Where to cut the SIM card

If you decide that you do not want to do anything on your own to avoid damage, then there are two options for where to cut the SIM card. You can come to the communication salon, you will be offered to either completely replace the plastic, get a new SIM, which has several layers and can be squeezed out of the shell to fit the required format. Or the employee will use the "stapler" described above. The second option is to contact the nearest telephone repair shop. Each such department also has a stapler, for a symbolic price (and in some places even free of charge) you will cut off excess plastic.

Nano SIM card price

If you applied to a mobile phone salon, then the exchange will be carried out for you absolutely free of charge. Now it takes a few minutes. And after a day, your old plastic will cease to function completely. If you went to a workshop or store household appliances, then you should know how much it costs to cut a SIM card. As a rule, the cost of the service ranges from 100 to 300 rubles in large cities. The price may be lower, and some good masters do it for free.