It often happens - a computer or laptop is turned on, there is a mood to watch a movie or listen to music, but only silence is heard from the speakers. Why could this happen? How big of a problem is this? How to quickly return the sound? Read all the answers and practical recommendations for restoring sound on your computer in this article.

Why you do not have sound on a personal computer or laptop, where did it disappear - the main reasons

The main reasons fall into two categories:

Software problems
Difficulties in the operation of the operating system, drivers, recently installed software - all this list can lead to the disappearance of sound.

Hardware problems
If your computer has experienced power surges or severe overheating recently, this could also lead to this situation. Alas, in this case, computer users most often have to inevitably resort to the help of competent specialists and make professional repairs.

If you have no sound on your laptop at all, there are several ways to restore it, one of which will surely suit you:

All of these points should be performed in the order indicated above, one after the other.

How to turn on the sound on the computer and make the sound louder (amplify the sound) - sound settings

In order to quickly turn on the sound on a laptop or computer, you need to connect speakers, then find the image of the speaker in the lower right edge of the screen, click on it, and raise the slider to the required level.

How to set sound on skype

Sometimes situations are possible when there is sound in all applications, but there are problems with it in Skype. In this case, do the following steps:

• In the "Tools" tab, select "Settings" and then "Sounds".
• Select "Return to default settings".

Why is there no sound when playing a video on YouTube or on a computer

When watching a video on YouTube, there may be problems with sound due to the fact that the "Pause" and "Sound" buttons are next to each other. If the speaker on the button next to the pause in the lower left corner is crossed out, you need to click on it and move the volume slider to the right.
Similarly, problems with sound are solved if it is not only in the video player. Most likely, it was accidentally disabled. A crossed-out speaker can be drawn near the sound slider. You need to click on it and select an acceptable sound level.

What to do if the sound on a laptop or computer constantly wheezes or disappears

If the sound began to dilute with wheezing or periodically disappear, most likely, there are difficulties with the drivers. Reinstall them after downloading these drivers from the official website of the original manufacturer of your sound card or your laptop.

How to correctly adjust the sound on a computer with the Windows 7 operating system

In order to adjust the sound on a computer with Windows 7, you need to go to the Start menu and select the already familiar Control Panel item. Next, select the Hardware and Sound subsection, and there the Sound item. In the tab called "Playback" you will see all the devices that play sound on the computer. Enabled are indicated by a green checkmark, and disabled by a red one.
To configure the sound, you need to select the "Sounds" tab, select the necessary device there and click the "Settings" button at the bottom of the window. In this section, you will need to select the necessary configurations. First of all, choose the scheme of your speakers - 2 of them, 3 or 5.
In the "Properties" section, you can find detailed information about the audio devices connected to the computer.

The procedure for setting up sound on Windows 8 is in many ways similar to the seventh version of the operating system. It is simple and clear:

• You need to go to the Control Panel and the "Hardware and Sound" section;
• In the "Playback" tab, select the equipment you are interested in and click "Settings";
• Choose the configuration that best suits your case;
• Next, go to the "Properties" section and adjust the sound balance, additional sound effects, sound bitrate (quality), and then save all changes.

How to restore sound on a laptop or computer if nothing helps?

If none of the above tips could help you, then the only way out is to turn to specialists. Take your computer or laptop to a computer service where they can always quickly find the reason that you have no sound and fix it.

Good time of the day!
I have an ASUSTeK P8H61-M LX3 R2.0 motherboard with an integrated VIA VT1708S sound card.
The sound from the speakers and the previous unpretentious headphones was Logitech USB normal. But the headphones broke and I, having studied the characteristics and reviews, bought a Plantronics RIG 500HD USB headset with my own 24 bit 96000 Hz surround sound sound card.
After connecting the headset to the USB jack, the Windows 7 operating system downloaded three drivers from the Update Center and installed it. The sound is amazing, but in stereo mode. To use 7.1 sound, according to the instructions, downloaded from the official site and installed the driver. As required, rebooted the system. The purity of the sound pleased, but the sound in the headphones is intermittent. Every second stutter-interruption. The speakers sound normal.
Removed the Plantronics RIG 500HD driver, restarted the computer - the sound became normal, but from the modes, of course, only in stereo.
He spared no time and reinstalled a clean system. And immediately - the factory driver. The picture has not changed - as it was before. Without factory drivers, the sound is standard, after installing one, the sound is intermittent.
I put all the ASUS drivers on a clean OS, then again the factory Plantronics driver. The same.
I installed a clean Windows 8.1 with the necessary drivers from the motherboard, then the Plantronics driver. Still sad.
I tested the headset on another computer with Windows 7. After connecting and automatically downloading with the installation of drivers from Windows Update, the headphones sound normal. Then I installed the factory Plantronics driver, rebooted the computer. I check - the sound of the headphones is excellent, stereo and ambient 7.1 without the slightest distortion! So the headset is correct.
I returned to my room, removed the cover of the system unit and tried to connect the headset through all possible internal and external USB ports. Tried even with no other USB devices connected at all. Without installing the Plantronics driver, the sound is normal. After installing the driver - the sound is interrupted. It turns out that the motherboard is OK.
In BIOS, I disabled the built-in sound system - it's useless. I tried the same options with the USB setting - to no avail. Therefore, I left the BIOS settings by default.
Switching the power to maximum did not help either.
Wrote to tech support. They advised me to update the BIOS (which I did, but to no avail). And also install updates:
KB2529073 - General USB driver update fix
KB2484031 - Audio stops playing
KB2122063 - No audio after sleep wake
KB2416007 - Intermittent connect/disconnect
KB2528984 - Hub issues on Atom CPU
KB2653312 - General Windows Audio - Sample rate converter error
KB981214 - There is high CPU usage when using a Full speed USB audio device connected to a USB 2.0 EHCI host controller. When the CPU reaches 100%, it can cause intermittent loss of audio, clicks and crackle sound.
KB2721341 - Audio stops intermittently

I downloaded these updates, but only one was installed. The rest either "are not designed for this system", or gave an error during installation.
And the most annoying thing is that in the answer of the Technical Support Service it was that since my headset works on another computer, their support is limited. That is, you would go sideways, buddy.
Of the advice you gave, I tried to do operations with IDE ATA / ATAPI controllers. But I did not find any, only 4 standard ones and 2 - Intel (R) 6 Series / C200 Series Chipset Family 2 port Serial ATA Storage Controller - 1C08.
It’s a pity to change the headset for another, because it sounds gorgeous. But alas, not on my computer.
All hope is on you, can you advise?

On a computer with Windows 10. This time, the network is overwhelmed with requests that the sound is wheezing on Windows 10 and crackling and hissing is heard. If you encounter a similar problem while playing video or audio, we recommend that you read the following recommendations.

Fix crackling sound issue by updating drivers

If after installing Windows 10 or updating the operating system, the sound of the music began to crackle or hiss, you may have installed one of the first versions of the software, which in most cases is raw and unfinished. Therefore, we recommend doing the following:

• Right-click on the Start icon and select Device Manager.

• Select the "Sound devices" branch. We find the sound device in the list and click on it with the right mouse button and select "Update driver".

• A new window will open. From the actions, select "Search for drivers on this computer.

• If the problem appeared after updating the Windows 10 operating system, then click "Select a driver from the list of already installed drivers" and click "Next". Then select "High Definition Audio capable device".

• If you just installed the Ten, then you should go to the sound card developer's website and download the latest drivers.

• After installing the driver, you must restart your computer and check the volume and playback quality of the recordings.

BIOS settings and their effect on sound quality

In some cases, the sound quality is completely dependent on the settings of the motherboard. You need to make the following changes to the BIOS.

IMPORTANT! Not all BIOS versions and not all motherboards will have the following sections for settings.

• We go into the BIOS with Windows 10.
• Find options C1E and EIST.

• We look for the HPET parameter and set the value to "Enabled". We select the bit depth, as in Windows 10.

Then press "F10" and restart the PC.

We solve problems through the interpreter

• Press "Win + R" and enter "cmd".

• The console will open. We enter the command: "bcdedit / set (default) disabledynamictick yes", press "Enter".
• Then we enter "bcdedit / set (default) useplatformclock true".

• We restart the computer.

Setting up sound effects on Windows 10

Often sound effects have a negative effect on sound quality. Therefore, configuring or disabling them may solve the problem. To do this, we perform the following.

• Right-click on the speaker icon on the taskbar and select "Playback devices".

• A new window will open. Select "Default Device". Click "Properties".

• In the new window, go to the "Advanced" tab and uncheck "Enable additional audio tools".

• Next, select the "Advanced Features" tab and check the "Disable all effects" box.

Also, if this method did not help solve the problem, you should select the sound format "16 bit 44100 Hz" in the "Advanced" tab. This format is supported by all sound cards.

Also in this window, remove the marks that are responsible for the exclusive sound.

Another way that can solve the problem is to turn off the sound effects. To do this, do the following:

• Right-click on the speaker icon and select "Sounds".
• A new window will open. Go to the "Communication" tab and check the "No action required" box.

• Save the result and restart the PC.

If these steps do not help, you should restart your PC.

Also, for solving the problem on Windows 10, see the video:

Very often, users of the “dozens” are tormented by one problem, which is sound distortion. Very often this happens after reinstalling the operating system or updating it, however, other reasons are possible. Below will be described several methods for troubleshooting these problems in the "top ten", which relate to the incorrect reproduction of sounds.

It should be noted right away that before you start looking for problems, it is advisable to check the reliability of the connection of the playback device. If third-party speakers are connected to the computer, then they should be disconnected and reconnected. The same must be done with all cables that relate to the audio system. In addition, it is worth checking the performance of the speakers on another device, if the sound is the same, then the problem lies in the wires or speakers.

Turning off audio effects and audio enhancements

If such problems appear, then you should immediately try to turn off the effects for the sound, as they can distort it. You need to right-click on the speaker icon and select "Playback devices".

Here you need to set the default hardware. It is also worth checking that the correct device is set, and not some other, as this can create sound distortion. In this case, you need to right-click on the necessary equipment and select the "Use by default" item. Maybe this will fix the problem.

If not, then you need to select "Properties" on the device. Then you need to find the item "Turn on advanced audio tools." In addition, if there is a “Additional Features” section, then you need to find and select the “Disable all effects” item in it and save the changes. After that, you can check the audio quality.

Audio playback format

If the above does not help, then you should try this method. In it, you also need to go to the "Advanced" item. In this case, you need to check the "Default Format" item. Here you need to set 16 Bit and 44100 Hz, and then save the parameters. This format is supported by almost all audio cards. If this is the problem, then adjusting this paragraph will help eliminate it.

Turning off the exclusive mode for the audio card in the "top ten"

In some cases, in the "top ten" there may be incorrect sound reproduction even with native "firewood". This can happen when the exclusive mode is activated. It is worth trying to turn off the exclusive mode in the "Advanced" section in the hardware settings and check if the problem is fixed or everything remains as before.

Tens Link Properties - Causes of Audio Problems

In the tenth version of the operating system, functions can be activated by default that automatically mute any reproduced sounds when talking in instant messengers and other similar programs. In some cases, these settings do not function correctly, so the sound is always quiet or distorted.

Here it is worth trying to turn off the volume reduction during conversations. To do this, set the "No action required" parameter and save the changes. You can do this in the "Communication" section of the audio properties. To get to this section, you need to go to the "Control Panel" and select "Sound".

Setting up the playback hardware

If you specify the default hardware in the list of playback devices, and then select "Settings", a playback setup wizard will appear, where the properties may vary depending on the PC audio card.

Here you can try to configure, depending on the device you are using. It is better to specify two-channel sound and remove additional processing tools. You can customize with different properties. In some cases, this may help to get the same sound as before the problem was identified.

Installing sound card drivers "dozens"

In most cases, incorrectly functioning sound may be the result of incorrect audio card drivers for the "tens". At the same time, almost all users are sure that they are not the cause of the problem, since the dispatcher writes that everything is working fine and there is no need to update the drivers. It indicates that the "ten" did not find another driver, but this does not mean that it works perfectly.

Also, drivers can be installed using either a special update utility, and everything will happen, as in the case described above. In both cases, the user is mistaken, but the standard manual installation of the official driver from the website of the laptop or motherboard manufacturer will help solve the problem. Surely a lot of users know how to install the necessary driver.

Additional Information

In addition, there are several additional, but at the same time rare scenarios of sound problems. Basically, they are expressed in wheezing or intermittent reproduction.

If the “ten” not only does not reproduce sound correctly, but at the same time slows down itself, the mouse cursor constantly freezes or something similar happens, viruses or incorrectly working programs, incorrect hardware drivers or defective hardware may be the cause of all this. It is worth checking all these reasons. It is worth noting that a couple of antiviruses can cause similar problems.

If audio playback problems occur on a virtual computer or mobile platform emulator, then this problem will not be solved. This may be a feature of functioning in virtual environments on certain equipment and using certain virtual computers.

Work and entertainment at the computer cannot be considered complete if there is no sound on it. It is necessary to watch movies, listen to music, receive notifications of new messages, and so on. You can name hundreds of programs, sites, games and applications that lose their relevance without sound.

The sound needs to be clear and loud, and distortion is a big problem that every Windows 10 user can face. If the sound on the computer began to crackle, wheeze, muffled, hiss, or have other problems, you need to fix the problem as soon as possible. malfunction. In this article, we will look at the main reasons why such sound problems can occur in Windows 10, as well as how to fix them.

Important: Before attempting to fix a software problem, make sure that the problem is not hardware. If the sound hisses from the speakers connected to the computer or laptop, try to check them by connecting the speaker system to the player or phone. In a situation where the laptop's built-in speakers wheeze, on the contrary, connect an external speaker system to your laptop and see how it will sound. You can also try disconnecting the laptop or computer connector from the sound card and plugging it back in.

The most common problem that most often leads to sound distortion is the included effects. In the Windows operating system, you can apply various effects to the output sound, which many users forget about, and they think that there are problems with the audio.

Sound effects on the computer may turn on due to changes in system settings by various applications that have administrator rights. You can check if the wheezing, hiss, or muffled sound is related to Windows effects in the audio settings. This is done as follows:

Hissing and crackling sound in exclusive mode

Some versions of Windows 10 may conflict with sound card drivers, causing the user to experience defects when listening to audio in exclusive mode. Also, problems with exclusive sound mode can occur on a weak computer. To eliminate the possibility of crackling, hissing and wheezing when playing sound due to exclusive mode, we recommend that you try turning it off.

To prevent apps from using exclusive sound mode, right-click the speaker icon again in the notification area and select Playback Devices. Go to the properties of the device you are using and on the "Advanced" tab, uncheck both items located in the "Exclusive mode" section.

Check if the sound is corrected after disabling the burst mode.

Sound problems due to incorrect drivers

The Windows 10 operating system automatically installs the optimal (according to its version) drivers when the system is first started. However, in some cases, problems may arise with such drivers. To exclude this, it is recommended to download and install the latest version of drivers for the sound card on the computer from the official website of its developers.

Please note: If the problem with hissing, wheezing and other sound defects occurs on a laptop, you can also try reinstalling the audio drivers from the official website of the laptop manufacturer.

Important: If the Device Manager does not show that there are problems with the sound card drivers, this does not mean anything at all. Even in this case, it is recommended to try updating the drivers, since the system may not see the presence of defects in the sound, assuming that since the sound is output, then there is no problem with it, but in reality it may be different.

Quiet sound in Windows 10 due to communication settings

Another innovation of modern versions of Windows is the automatic muting of the sound output by various programs when calling, for example, in Skype. There may be situations when this option does not work correctly and, due to some errors, constantly keeps the sound muffled, believing that the computer is in ring mode.

To rule out the possibility of quiet sound problems due to this Windows feature, you can try disabling it and see if the problem persists. The option in the sound settings is disabled:

Sound problems in Windows 10 due to incorrect playback format

Modern models of sound cards support almost any audio playback format that can be offered by the Windows operating system. However, if an old card is installed in the computer, this may cause problems.

To go to the playback format settings, you need to go to the "Control Panel" and select "Sound" from the available options. Next, click on playback device properties. A window will open where you need to go to the "Advanced" tab. Set the Default Format to 16-bit 44100 Hz (CD) and save your changes.

It is worth noting that the 16-bit format at 44100 Hz is supported by almost all sound cards, and it has been used since the early versions of Windows.

If none of the above tips helped to fix the situation with wheezing, crackling and hissing sound, we recommend that you try to scan your computer for viruses. It often turns out that the computer is infected with a Trojan or Malware virus, due to which the operating system “freezes”, which is accompanied by a temporary loss, wheezing or crackling sound.