Here's an easy way to create dotted lines. The big plus of this technique is the advantage over some of the simpler methods - that you use the built-in brush presets, which opens up a ton of possibilities. No other programs needed and no manual work with fancy pipes or complicated mouse work.

This is the result of a simple form. Let's start. Let's open a new document of any size with a small width, let's say 200 width and any height.

First, select the Pencil tool, make sure the settings are applied to all brushes. Before doing anything else, be sure to save your brushes if you already have a fancy curly brush set. You can play around with the settings and you can always load your previous set.

Double click on the second small brush in the palette window. Your palette should look rough when working with a pencil tool. We'll look at versions of the brushes with blurred edges later ...

You can now see the brush settings. An important change to make the dotted line effect. For the simple dotted line I created above, just changed Spacing, choosing 250% ... You can change this in any way up to 999.

Now just draw with your pencil and you will have your own dotted line! To keep your line straight, hold Shift pressed when you draw a line. Another way is to click at the starting point and then, while holding Shift, click on the end point; PhotoShop will make a dotted line between two points!

For practice, try playing with the brush size and dot spacing settings. Also you can download square brushes at Adobe Photoshop> Goodies> Brushes & Patterns> Square Brushes, this will give you square dots, use the same settings. Take the Brush ( Paintbrush) and see what effect it will give, the same thing, only with blurred dots. Apply the same settings to the Spray tool ( Airbrush tool).

Along with the size and distance between the points, if you need to make elongated point lines that are on a line at an angle, just change the angle of the brush. You can change the angle of your brush, in which case the direction of the point on your line changes. You are now an expert on dotted lines in PhotoShop!

Life hack how to create a dotted line in Photoshop- Every second PC user is familiar with Photoshop. For many users, this is exclusively a program for editing photographs, however, using fotoshop it is possible to depict drawing elements.

If there is a need to create a dotted line, then you should use a good and faithful assistant to the retoucher - a brush. The first step is to create one element - a dotted line. Open a new document of any size and fill it with white. This is a necessary step to get the desired result. Then we select the tool “ Rectangle"And set the parameters according to the recommendations in the images below:

The dotted line size can be adjusted to suit your needs. Next, by clicking on the white sheet, a dialog box opens, where the action is confirmed. The constructed rectangle shape appears on the screen. Do not panic if its size is too small in relation to the sheet. This is not critical. Then in the menu " Editing» - « Define brush»You need to enter a name and confirm the action by clicking OK.

Thus, the tool “ Dotted line"And you can try to create a dotted line
line.

1) We choose " Brush»And find the created tool among the palette.
2) Press the key F5 and determine the intervals between the dotted lines. (with the help of a special slider we adjust the distance).
3) A guide line (horizontal, vertical) will be a good helper.

Then you should put the brush at the beginning of the guide, and using the button Shift without releasing the mouse, continue the dotted line. You can hide or show orthogonality by pressing the combination CTRL + H... If you do not doubt your skills, then you can draw a guide without using SHIFT... To build vertical axes, you must perform a series of actions: press the key F5 and see the image as in the picture.

In this tutorial, I will show you how to make dotted lines. The easiest way: we will take the "pen" with you, select the "shape" mode, set the "fill" to "no color" and choose the color for the stroke that we wanted. Let it be blue. Also at this stage we need to choose how thick the dotted line will be. Let's say 2 pixels and choose what it will be. Whether it will be dots or will it be dotted lines. Let's pick them out.

And just draw an arbitrary line that we will ultimately need. After we press "Enter", the outline disappears, only a dotted line remains. This is the easiest way, but it doesn't always work. On some versions of Photoshop, this will not work. And for this there is a second way, in which we also need the pen tool.

Here we are already drawing in the "contour" mode. We also create the bend that we would like. Let it be just such a semicircle. And now we need to switch to the Text tool. Move the cursor to the path, and we will see that such a small dotted line appears next to our cursor. This means that when we click, our path will turn into editable, and here we can write some text. But since we are creating a dashed line, we just need to click on the dash many times. We got such a contour. Also, this contour can be outlined with dots. The second way is text.

And one more way, it is also outlining the path using the brush tool. The first step is we set up the brush with you. To do this, we need to make this brush first. We create a new document: Ctrl + N. Width -27 pixels and height - 6. At this stage we need to set the size that will be equal to the size of the stitch. Choose a transparent background. Click "OK". And fill this document with black. Now we need to define a brush: edit / define a brush. Let's name it and click OK. This document can be deleted.

Go back to our main document, select the "brush", and as you can see, it is already there. Set the brush opacity to 100% and go to the palette settings and slightly change its parameters. We definitely need to increase the number of intervals, and go: brush dynamics / control / direction. And then our brush will repeat the curves of the path. Also at this stage, set the color with which your brush will paint, and choose a size, it can be made a little smaller.

Now take the pen tool as well. We draw the path that we need. We also operate in contour mode. Bring the pen tool to the path itself and with the right mouse button call the "context menu / stroke the path / select our brush (the one that we set in the previous step will be selected. Click" OK ". The brush has completely repeated the curve of the path.

Photoshop is not a program for creating drawings, but still sometimes it becomes necessary to depict drawing elements.

In this tutorial, I will show you how to make a dotted line in Photoshop.

There is no special tool for creating dotted lines in the program, so we will create it ourselves. This tool will be a brush.

First, you need to create one element, that is, a dotted line.

Create a new document of any size, preferably smaller, and fill the background with white. This is important, otherwise nothing will work.

We take the tool "Rectangle" and set it up as shown in the pictures below:

Choose the size of the dotted line according to your needs.

Then click anywhere on the white canvas and, in the dialog box that opens, click OK.

Our figure will appear on the canvas. Don't worry if it turns out to be very small in relation to the canvas - it doesn't matter at all.

Give a name to the brush and click OK.

The tool is ready, let's take a test drive.

Choosing a tool "Brush" and in the palette of brushes we are looking for our dotted line.

Then press F5 and in the window that opens, set up the brush.

We are primarily interested in intervals. Grab the corresponding slider and drag to the right until there are gaps between the strokes.

Let's try to draw a line.

Since we most likely need a straight line, we will extend a guide from the ruler (horizontal or vertical, whichever you want).

Then we place the first point on the guide with the brush and, without releasing the mouse button, hold down SHIFT and put the second point.

You can hide and show the guides with the keys CTRL + H.

If you have a steady hand, then the line can be drawn without the key. SHIFT.

To draw vertical lines, you need to make one more setting.

Press the key again F5 and we see such a tool:

With it, we can rotate the dotted line to any angle. For a vertical line, this will be 90 degrees. It is not difficult to guess that in this way you can draw dotted lines in any direction.

Here, in a simple way, we learned how to draw dotted lines in Photoshop.

There is no “right” way to draw lines in Photoshop - each artist and designer eventually finds their own methods and chooses the tools they are comfortable with. Whether you're using the Line tool, Pen tool, or Brush tool, you can approach a creative project in different ways and still get the same results. In this how-to guide, we'll show you how to draw straight lines in Photoshop using the many drawing tools available in this program.

Line tool

To find the Line tool, click and hold the mouse button over the Rectangle tool on the main toolbar. A menu for selecting the shape of the tool will open. If any shape tools are enabled, you can also select the Line tool from the top options menu.

Why is the Line tool considered a shape? Basically, the Line tool just creates thin rectangles that look like lines because the Fill and Stroke colors are the same. If you want the line to be empty inside (like a rectangle), just turn off the fill.

It is easy to draw straight lines with the Line tool. Just click anywhere in the image and drag the line in the direction you want. If you want to draw a strictly horizontal or vertical line, hold down the Shift key while dragging and Photoshop will take care of the rest.

Once you've learned how to draw straight lines in Photoshop, you can experiment with the advanced options and create dashed lines from dots or strokes. To find these options, click the Stroke Options icon on the left side of the options bar, and then select More Options. Here you can define and save custom settings, turn on the dotted line, and select the length of dashes and spaces.

Brush tool

The Brush tool also lets you draw straight lines and, unlike the Line tool, lets you create your own brush styles. The Brush tool is located on the main toolbar, separate from the shape tools.

To create perfectly straight lines in any direction, hold down the Shift key while drawing with the Brush tool. To create a shape from several lines, draw a line while holding Shift, release the mouse button, press the Shift button again, and then start drawing a new segment from the end point of the last line.

Like the Line tool, the Brush has many stroke options that you can change in the top options bar, including hardness, opacity, and brush style. We recommend adjusting these settings before you start painting strokes because the changes will not be applied to all the brushstrokes you have already made.

Pen tool

Finally, the Pen tool is extremely useful for drawing straight and curved lines. To select the Pen tool, click on the pen-shaped icon in the main toolbar, then click on the image to set the starting point, and again to set the ending point. Photoshop will automatically create a straight line between the two points, no matter where they are located in the image. If you hold down the Shift key while specifying these points, you can create line segments with angles of 45 and 90 degrees.