Computer and mobile technology has become widespread, and today in many homes there can be not only a stationary computer, but also laptops, smartphones and other gadgets. It would be too expensive, inconvenient and pointless to connect an Internet connection to each of them, so most network users choose wifi routers that allow distributing an Internet signal to multiple devices. Over time, some users notice that the connection speed has become significantly lower, which can happen due to the fact that neighbors are also connecting to it, so it is advisable to know how to change the password on the zte wifi router.
Why change is needed
Choosing one or another tariff for accessing the Internet via a wifi router, the user expects to receive the connection speed declared by the operator for the paid subscription fee. At first, it may be close to the regulated value, but often after a while it decreases. At the same time, the problem rarely lies in a malfunction of the wifi router or malfunctions on the part of the provider. Both the user himself and the provider may not be aware of the existence of additional connected devices. The provided traffic is only distributed to a larger number of equipment, and the speed of each connection is significantly reduced, but the number of connections is not displayed.
Many users wonder how neighbors, in fact, absolutely strangers, can find a complex password from a router, but in reality it turns out to be quite simple. This happens for the following reasons:
- After buying a new wifi router, you need to not only plug it into the network, but configure it correctly. Inexperienced users often choose the default settings so as not to understand the intricacies of a complex process. In most cases, the standard password is the same for all routers of this manufacturer, so it is not difficult to find out through forums on the Internet or online instructions for the equipment.
- Not everyone can properly configure the router, and even more so, not everyone knows how to change the password on a wifi router, so a computer wizard is invited to carry out these actions. A specialist, due to his negligence, inexperience or in agreement with users, can protect the connection with a simple, easily guessable password. The most popular combinations are "123456" and "qwerty".
- If you are in a hurry to set up an Internet connection on a zte router, you may not notice a special point about installing a security key. In this case, outsiders do not even have to search or select a combination, a couple of mouse clicks will be enough to connect to your wireless network.
Password change process
Changing the password on the zte wifi router is quite simple, you do not have to call a computer wizard or contact your provider. In this case, an active Internet connection is not necessary, you can not connect to the network, but all the wires must be installed in the necessary slots in the router.
To change the password for the wireless network, you need to log into the web interface, this can be done from any computer or laptop connected to the router. To do this, open any available browser and enter "192.168.1.1" in the address bar, then press the "Enter" key. The entered digits are the IP address of the router in the local network, it is set by default for all zte routers. If the page asks for a username and password, you must enter "admin" in both fields, if you use an Internet connection from the MGTS provider, the username can be "mgts" and the password "mtsoao".
After that, you will be taken to the start page of the interface, made in white and green, all items on it will be indicated by words in English, but you should not be afraid. If you have never entered the settings of the router, you can simultaneously change some parameters to improve the quality of the connection and establish additional protection against unscrupulous neighbors.
To do this, in the top panel, select the item marked with the word "Network", in the list that opens on the left, go to the line "WLAN" and in the subsection "Basic", where the basic parameters of the router are set. In the Mode item, it is desirable to change the value to a mixed type of connection (802.11b + 802.11g + 802.11n), set Russia in the Country / Region line, and select Auto in the Channel item. Then you can set the signal strength (Transmitting Power), it is calculated as a percentage. If you have a large apartment, and you plan to use the Internet at different points in it, it is better to set the maximum value. If you will be connecting to a wireless network on different devices while in the same room, you can set a lower value so that the signal is not transmitted to your neighbors' apartments. After completing all the settings, you must press the "Submit" button at the bottom right of the page for them to take effect.
Some zte wifi routers are capable of creating multiple networks at the same time, which can also reduce access security and overall connection speed. So that, having changed the password, you again do not think about the reasons for the low speed, you need to establish a single network. To do this, in the “WLAN” section, go to the “Multi-SSID Settings” subsection, select “SSID 1” in the “Choose SSID” line, check the “Enable SSID” box and name the network in the “SSID Name” line.
Changing the password is made in the same section "WLAN", but in the subsection "Security". As in the previous menu, in the line “Choose SSID” you need to select “SSID 1”, the type of encryption (Authentication Type) is better to choose “WPA2-PSK” or “WPA / WPA2-PSK”. Finally, in the "WPA Passphrase" field, you must enter any phrase from numbers and Latin letters that you find convenient to remember, but it is impossible for outsiders to pick up. After you have changed the security key, you must press the "Submit" key for it to take effect.
Since it is very easy to change the password on the zte router, it is advisable to do it often to avoid unauthorized connections.
How to remove graphic lock from Android on ZTE gadgets.
If you accidentally locked your ZTE device by repeatedly entering the pattern key incorrectly, then in this case there are several options for solving your problem.
The methods of unlocking will be discussed in this material.
Choose the option that suits you best.
Be careful when performing one of these methods, otherwise you can seriously damage the system of your device. Good luck!
Method number 1.
The option concerns your Google account. Your device must have an account with this service. Also, to solve your problem using a Google account, you will need a network connection.
Let's get started, after you have entered the wrong graphic code 5 times, the question "Forgot the graphic key?" Should appear on your screen. We select this inscription. We need to get to the page where we will enter our account data. If all the data was entered correctly, then a page automatically appears with a proposal to choose a different blocking method. At this point, you can completely remove the pattern or set another type of lock. It all depends on you.
Method number 2
The option will suit you only if ROOT access was obtained for your ZTE device and USB debugging was enabled when connected to a personal computer.
Let's get started. We follow to connect your device to a personal computer and open the Windows command line. There we drive the cmd command into the search engine. It can also be found by following the path "Start" - "Programs" - "Standard" - "Command line". In this command line you need to enter: adb shell, su, rm / data / system / gesture.key
Then you should restart your ZTE gadget. The pattern lock will appear again on the display, but this time you can enter absolutely any combination - your device will be unlocked.
Method number 3
The option will suit you if a custom recovery was previously installed on your device, for example, CWM.
You need to download the latest version of Aroma File Manager. Then we place the archived document in the base of the memory card. We start CWM (using the "volume up" + "power on" keys.
In CWM, you need to load the data section (mounts and storage -> mount / data). After that, we go back to the main CWM page. Then follow the path "install zip from sdcard" - "choose zip from sdcard" - "aromafm-1.80.zip" - "Yes - Install aromafm-1.80.zip".
This means you have launched the download of Aroma File Manager. Now go to the data - system directory. There we find the gesture.key file and activate it by checking the box. Now in the lower right corner we find the item "Menu". It should contain the item "Delete". We activate it.
You can now exit the Aroma File Manager program. Go to the main CWM page again. There you need to select the category "reboot system now". The lock screen should load again. Ignore it and enter any combination. It will work.
Method number 4
This option is suitable if you do not feel sorry for your files stored in the device's memory.
Method number 5.
The option, in our opinion, is the simplest. To unlock your device, you need to select the button on the "emergency call" lock screen. There we dial a combination of numbers * 983 * 987 #. Then we select the item "Reset phone settings". In this case, not only the graphic code will be deleted, but also all the settings of your device.
In this article, you will get acquainted with 2 ways to find out the name of your Wi-Fi network and the password (key) to connect to it.
A short version of the instructions is located.
Method 1. The name of the Wi-Fi network and the password (key) are on the back of the modem (terminal).
Step 1
Flip the modem over.
Figure 1 - Rear view of the modem (terminal) ZTE F660v5 (option 1)
Figure 2 - Rear view of the modem (terminal) ZTE F660v5 (option 2)
Step 2
Option 1. If on the back of the modem there is an inscription "SSID1" and "WPA-PSK", then "SSID1" is the name of the wireless Wi-Fi network, and "WPA-PSK" is the password (key) to connect to it.
Option 2. If there is an inscription "SSID1" and there is no inscription "WPA-PSK", then we are looking for an inscription "SN". "SSID1" is the name of the Wi-Fi wireless network, and "SN" is the password (key) to connect to it.
Please note that capital letters may be written here!
Figure 3 - Sticker for connecting to "Wi-Fi" on the modem (terminal) ZTE F660v5 (option 1)
Figure 4 - Sticker for connecting to "Wi-Fi" on the modem (terminal) ZTE F660v5 (option 2)
Note: if the "Wi-Fi" indicator on the modem does not light up, then you need to press the "Wi-Fi" button 1 time (without holding) for the indicator to light up.
Figure 5 - Button "Wi-Fi" on the modem (terminal) ZTE F660v5
Method 2. The name of the Wi-Fi network and the password (key) in the modem (terminal) settings.
Step 1
Connect the cable from the computer to the modem in port 1 (LAN1).
Step 2
Open a browser, for example Google Chrome, and enter "192.168.100.1" (without quotes) in the address bar.
Figure 6 - IP-address of the web interface of the modem (terminal) ZTE F660v5
Step 3
In the “Username” field, enter “admin”, in the “Password” field, enter “admin” (all without quotes). Click the "Login" button.
Figure 7 - Login to the web interface of the modem (terminal) ZTE F660v5
Step 4
Figure 8 - Section "WLAN" - "Basic" in the settings of the modem (terminal) ZTE F660v5
Step 5
Figure 9 - Section "WLAN" - "SSID Settings" in the settings of the modem (terminal) ZTE F660v5
Step 6
Figure 10 - Section "WLAN" - "Security" in the settings of the modem (terminal) ZTE F660v5
Step 7
Find a wireless Wi-Fi network and click on it.
Figure 11- Wireless Wi-Fi network on a smartphone
Step 8
Enter the password (key) to connect to the wireless Wi-Fi network.
Figure 12 - Entering a password for connecting to a wireless Wi-Fi network on a smartphone
Articles and Life Hacks
Many mobile users are interested in the question regarding ZTE products - how to unlock a phone? If you have a similar problem, it needs to be urgently addressed.
Unlocking sequence
- If a similar problem arises, experts advise you to unlock your phone yourself. To do this, you need to remove the SIM card from the device and turn on R221 by dialing the following combination: * 983 * 8284 #.
- Then you need to enter the required unlock code. Next, the mobile phone must be turned off and a SIM card of another cellular operator inserted into it.
- After turning on the mobile device, you need to enter the PIN code - the cell phone is unlocked and can work on a SIM card of any mobile operator. In this way, you can unlock any zte mobile device.
- To unlock your phone, you first need to download the firmware, which is usually quick and hassle-free.
- However, a user who dares to do this procedure on his own takes responsibility, since such firmware does not work on all phones.
Unlocking features
- To find the NCK code used to unlock your device online, you need your unique cell phone number (IMEI). This number can be found on a sticker located under the battery, on the packaging, or by dialing the combination * # 06 #.
- Each device has its own IMEI and NCK, therefore, you should not try to determine them by dialing random numbers. This will disable the device or even destroy it.
- To determine the date and firmware version of the phone, as well as find data on its range, you need to enter the following combination * # 0000 #.
- To softly (with a preliminary request for permission to perform the operation) restore the original device settings, dial * # 2820 #.
- Smartphone owners need to remove the SIM card and flash drive, and then try to return to the factory settings or format the phone.
To fully format the device, when turning on the device, hold down the Green button together with * and button 3 until the screen displays "Formatting ...".
In the process of device operation, press and hold the Menu button for some time, display the operating applications, and then select the required one for unloading in the memory.
Although the method itself works on other models of this brand, such as: SFR-114, SFR-231, SFR-232, SFR-341, SFR-342, SFR-343, SFR-251, SFR-251 Messenger Edition, Orange Vegas , Orange Lisbon, Orange Rio, Orange Miami, Orange Rome ZTE Sage, TMN5000, Vodafone Indie, A261 +, X670, X760, X761, X960, X990, X991, N261, N281, N292, N295, S202, GX760, GX761, GR230, GR231, T-Mobile Vairy Touch, T-Mobile Vairy Touch II, Vodafone 547, ZTE Zest, Zong R221, Zong R231 and others. I would like to focus on the fact that the code is generated only 12-character, if your phone does not accept it, then you need to try other options, for example
The entire unlocking procedure will not take more than 5 minutes, but it requires some steps on your part.
How do I find out the IMEI number?
First of all, we need to find out the unique IMEI number that is assigned to each device. To do this, turn off the phone, take out the battery and read it on the sticker. Or even easier, we type the combination *#06# and get it. Once we have figured out what IMEI is in our phone, we proceed to calculating the unlock code.
How do I get the unlock code?
To calculate the code of interest to us, go to the page of the free online calculator of the wintechmobiles command, where in the line Enter IMEI enter your number, consisting of 15 digits.
Push Calculate Codes and in a few seconds, the cherished codes are in our pocket!
It remains now to enter the received code into the phone.
How do I enter the code into my phone?
Due to the large number of supported phone models, there is no universal method for entering the received code. Here are the main ways to unlock phones:
- Insert a non-native SIM card into the locked phone, the phone should ask you to enter the unlock code (NP code?). This is an easy way, you just need to enter the code.
- If the first method didn't work? We take out the SIM card, turn on the phone without it and dial the code ###825*09# there was a request to enter a code? Enter the unlock code.
- Nothing again? try another combination *983*8284# should work .
- For new phone models ZTE such as F102, this combination should work *983*865625#
That's basically all, I think that there is nothing complicated in this procedure. But you can save time and money.
What if the code doesn't match?
Due to the fact that the model range supported by this free calculator is very small, try asking a question in the comment. There is a paid option with which codes can be calculated for other ZTE phone models.
Order instant unlock!
You can also safely use the services of our partners for unlocking ZTE phones.
Instant receipt of the code after payment
You will not find better deals on the net!
