When installing the operating system, you must go to the Boot Menu to tell the computer which device to boot from. It is also necessary when you need to start from a Live CD or bootable USB flash drive. Today I will tell and show you how to enter the Boot Menu both on PC motherboards and laptops.
Just as you need to press a special key (F2 or Del) to enter BIOS or UEFI, there is also a specific button to invoke the boot menu. Typically, these are the F11, F12, or Esc keys, but there are exceptions. Usually, when you turn on the computer, under the splash screen, you can see a key that is responsible for calling the Boot Menu.
You can, of course, do without the Boot Menu, simply by choosing a certain boot order of devices in the BIOS, but if you want to boot one time (checking for viruses or installing the system), then I would advise using the boot menu, because it is much faster.
So, what is the Boot Menu for at all - you ask. This menu shows a list of devices connected to the PC from which you can boot (flash drives, CDs, hard drives) for further system installation or for testing components.
Entering the Boot Menu in Windows 8 and Windows 10
If you are the happy owner of a laptop on which Windows 8, 8.1 or Windows 10 was originally installed, then you may not be able to enter the Boot Menu. Let me explain why: shutdown in these systems is not complete, since it looks more like hibernation, so when you press F11, F12, Esc, the boot menu may not open. There are several ways to fix this:- hold down the Shift button when selecting "Shutdown" and then the PC should shutdown fully;
- turning off the quick start of the system - in the "eight" go to the Control Panel,
We go to the "Power supply",
On the left, click on "Actions of the power buttons",
Disable the "Enable Fast Startup" item (you can do this not even on a laptop).
Entering the Boot Menu on Asus laptops and motherboards
On almost all Asus stationary computers, to enter the boot menu, you need to press the F8 button immediately when the computer turns on. If we press F9 or Del, then we will get into the BIOS.
When it comes to laptops, this is a little confusing. The Esc key brings up the boot menu on modern models, on older laptops the F8 key works and mainly on models whose names begin with the letter k or x. In short, if the Esc key does not bring up the Boot Menu, then we reboot and try to press F8.
Entering the Boot Menu on Lenovo Laptops
The boot menu on Lenovo laptops can be accessed by pressing the F12 key. If you want to use additional boot options, press the additional arrow key,
Entering the Boot Menu on Acer Laptops
On all Acer notebooks and all-in-ones, the F12 key is used to invoke the Boot Menu at startup. But, laptops of this company have one unpleasant feature - the ability to call the boot menu is disabled in the BIOS settings. To fix this, let's get into the BIOS by pressing the F2 key. Now let's find the "F12 Boot Menu" parameter and activate it so that the word Enabled is next to it. All that remains is to save the settings and exit the BIOS.How do I enter the boot menu on my laptop and computer?
Do you want to boot your computer from a USB drive or disk drive? There is no need to enter BIOS settings for this purpose. Especially if you don't understand much here. Ultimately, of course, the easier way. In such circumstances, it is enough to enter the boot menu and change the boot priority of the devices. This is done over a period of 10 seconds. V. without shamanism in the BIOS.
Boot menu. what it is
What do users usually do to reinstall Windows? Typically, write a licensed digital copy to a bootable disk via UltraISO and then configure the BIOS to boot from a USB stick. In principle, this is not difficult, but there is an easier option. call in the boot menu. What's this?
The boot menu (or boot menu) is an extremely useful BIOS option. With it, you can quickly adjust the boot priority of devices. To put it simply, launching the boot menu brings up a small window where you can immediately place the USB stick (or DVD) in the first place instead of the hard drive. in the second. At the same time, you don't need to enter BIOS.
In addition, changing the settings in the Booth menu does not affect the BIOS settings. That is, this option only works once. for one inclusion. And when you restart your computer, Windows will boot from your hard drive (as usual). If you need to run Windows Setup again from a USB flash drive. bring up the boot menu again.
How to bring up the boot menu
How do I open the boot menu? It’s very simple. press one button while booting Windows. Which one of? It depends on the:
- BIOS version;
- motherboard;
- laptop model.
That is, the situation is exactly the same as in the BIOS. For example, to enable BIOS portable PC, you had to press the "Del" or "F2" button, and to open the boot menu you need to click on another.
Therefore, below we will consider how to launch the Booth menu on popular brands of laptops and personal computers.
How to enable boot menu on Lenovo laptops
Lenovo laptop owners shouldn't have any difficulties. After all, the boot menu in Lenovo starts very easily. pressing the F12 key while Windows starts.
In addition, many models have a special button with a curved arrow on the case. You can click it if you want to select an additional one. boot parameters.
How to open the boot menu on Asus
Read also
Modern LG TVs can access the web, to use this ability, the majority of models have a Smart TV platform. Specifically, through a smart TV, the TV receiver interacts with services on the web, such as watching movies, communicating ...
Lenovo laptop does not fit Lenovo G580 laptop does not fit. Disassembly and repairFinding that your Lenovo laptop refused to cut it, the OS does not load, some kind of discrepancy with the indicators, then without performing a high-quality installation how to apply for repair, use ...
Gears 5 was a triumphant tech showcase for the Xbox One, and the Coalition gave insight into what the future of the franchises might have in terms of visuals. Speaking to Gamespot, Gears 5 CTO Colin Penti confirmed that Project ...
Android is used as a joystick for games. You can easily play your favorite races, flight simulators, shooters, using your weight android accessory as a real wireless joystick, part-time and a computer control panel! Installation is not ...
The Spring Festival will take place on January 25 next year, which suggests that the Realme X50 could go official later this month or early next year. Realme X50 could be launched until January 25 next year The phone will run on Qua ...
Have you ever needed to record a telephone conversation? If the answer is yes, then you've come to the right address. For now, let's talk about how to record a conversation on an iphone without much difficulty. However, the principle ...
It is immediately worth noting here that there are Asus motherboards (installed on a PC) and laptops of this brand.
Boot menu
on a computer with. Asus's board is simple. you need to press the F8 key when it boots (at the same time you normally enter BIOS).
How to enter the boot menu on laptop and computer
How to login Boot menu for Asus, Lenovo, HP, Samsung, Acer other laptops and computers. boot—menu/.
Acer Aspire E1-572G. Bios setup and full Windows installation process for ND!
How do I log in and configure the BIOS? How do I reinstall Windows? Let's look at it all with an example Notebook Acer Aspire E1-572G.
And there is a bit of confusion with Asus laptops. It seems that the manufacturer is the same, but there are several buttons for launching the Booth Menu. After all, launching the boot menu on Asus laptops is done using one of two keys:
Most often this is the Esc key, although it could be F8. There are only 2 keys, however, so you'll quickly figure out which one is responsible for launching the boot menu on your Asus laptop.
How to bring up the boot menu on Acer notebooks
The boot menu on Acer opens by pressing the F12 button. But there is one small nuance here. The fact is that usually the launch of the boot menu on Acer laptops is disabled. And when you press F12, nothing happens. For it to work, you need to do the following:
- Enter the BIOS (press the F2 button while booting the laptop).
- Go to the "Home" tab.
- Search for the line "F12 Boot Menu Msgstr "And change the value" Disabled "to" Enabled ".
- Save changed settings and exit BIOS.
Read also
Samsung and LG are making portable monitors for smartphones due in Q2 2020 Smartphones from Samsung and LG to arrive in Q2 2020 New smartphone monitors will allow users to connect their smartphones to them ...
The touchpad is an age old feature that has long changed different mouse controls. With the help of it, today you can completely control our device, even a laptop or a hybrid tablet. Probably laptops (Acer, Asus, HP, lenovo, Dell) have difficulties during work ...
Our Wish List for a 7th Surface Microsoft Microsoft has regularly developed some of the best Windows tablets and 2-in-1 laptops over time with its surface composition. When Surface Pro 6 was released, unfortunately, still ...
Some iPhone XR users are experiencing bugs and performance issues after downloading the latest iOS 13 firmware The 6.1-inch iPhone XR has been in color for over a year now, and we still get a lot of feedback from those who ...
How to Disable Auto Brightness on iOS 11 Auto Brightness (in other words, automatically adjusting the brightness of the screen) has appeared on smartphones and phones for a long time. On the iPhone, of course, there is such a function. It automatically selects ...
The system will reboot and you can enter the boot menu on your Acer laptop using F12.
How to enable stand menu on Samsung laptops
To bring up the boot menu in Samsung, you need to press the Esc key. But Samsung laptop owners need to know one thing. The fact is that to call the Booth menu you need to press the Esc button once! If you double-click, the window will simply close.
Therefore, you will need to use it to know when to press the Esc key. Although there is nothing difficult here. just a couple of tries and you will be taken to the boot menu on your Samsung laptop.
How to enter the Booth menu on HP notebooks
Launching the boot menu on HP also has its own peculiarities. In the end, opening the Booth Menu is slightly different. To enter the boot menu on an HP laptop, you need to:
- When Windows starts immediately, press the Esc key.
- The start menu will appear. press the F9 button.
- Ready.
This will open the boot menu for your HP notebook and you can set the device power-on priority (using the arrows).
How to enter the boot menu in Windows 10 or 8
All of the above methods allow you to launch the boot menu in Windows 7. If your PC or laptop has Windows 8 or Windows 10, you probably won't be able to enable the Boot menu.
There are three ways to fix this:
- Hold Shift when shutting down laptop or PC. After that, it will shut down normally (in the usual sense of the word). And then you can start
boot
Menu in Windows 10 by pressing the desired key.
- Instead of shutting down your PC, you can restart it. And at the moment of turning on, just press the specific key corresponding to your brand of laptop or motherboard.
- Disable Fast Startup. For this:
Everything. you can now easily navigate to the boot menu in Windows 10 or Windows 8.
List of keys to enter the boot menu
For your convenience, the screenshot below shows the keys to launch the boot menu for popular laptops and PCs. For example, for computers running on a mat. MSI board. F11 button. And launching the Booth menu on Sony VAIO laptops is done using the F12. In general, understand for yourself. the table is simple and straightforward.
The computer does not boot, what should I do? In the operation of the system, this is possible due to the action of various viruses, your mistakes in using Windows or the use of incorrect drivers. But do not despair, I propose to learn how to get out of such situations with dignity.
You can always try to fix such sudden problems with the F8 key and the windows 7 advanced boot options menu.
During computer startup, after loading the BIOS, press the F8 key which will bring up a menu for managing additional boot options for windows 7.
About the boot modes: "Safe Mode", "Safe Mode with Loading Network Drivers" and "Safe Mode with Command Line Support" you can find in the article
Let's consider the rest of the parameters:
Boot logging- here Windows will keep a log of loading all drivers and services by writing it to the ntbtlog.txt file, which is located in the Windows folder. After an unsuccessful system start, using this mode will view the boot log from the System Restore Console and find the driver or service responsible for the boot error.
Enabling low resolution video mode (640x480)... Loads the computer with a 640 x 480 screen resolution. This allows you to eliminate the incorrect setting of the monitor and video adapter, for example, if your monitor cannot support the set parameter.
Last Known Good Configuration (optional)- when booting in this mode, the saved data of the computer state after the last successful boot of the system is used, which cancels the changes made in the settings after this save. This allows you to cancel the installation of a driver or change the settings of services or the operation of the installed equipment. Use this mode to cancel installed drivers or unsuccessfully change parameters in the operation of services.
Directory Services Restore Mode- This option works on server systems and restores the directory service on a domain controller.
Debug mode used by professional programmers to debug the system. When using this mode, debug information is sent to another computer via the serial port.
Disable automatic restart on system failure- In the default settings, in case of a critical error during the boot process, the system automatically reboots. When you select this item, the automatic reboot mode will be disabled, which will help you to study the error message in detail.
Disable mandatory driver signature verification- this option allows you to disable the verification of digital signatures for drivers when loading the system. Sometimes this check can be the source of a boot problem. This option will also install an unsigned driver. However, in order to use such drivers, you will need to constantly select this item when starting Windows.
Out of habit or out of ignorance, some computer and laptop users use the BIOS or UEFI menu to boot from the device on which the Windows installation files are located, to launch a LiveCD or a system backup. But for this you can use the Boot Menu, especially since this option is more practical and simple. It is enough to call the menu with a special key and select the device (hard disk, USB flash drive, DVD drive) from which the download will be carried out.
You can learn how to enter the Boot Menu on laptops and computers from this guide.
Since manufacturers do not have a specific rule for assigning a button to call the Boot Menu, each of them chooses the one that they think is ideal for this task. This manual lists the keys that, in most cases, will display the boot menu. In addition, the nuances of calling it on laptops with Windows 10 preinstalled are mentioned here, and examples are specifically given for Asus, Lenovo, Samsung and others laptops, as well as motherboards from Gigabyte, MSI, Intel, and so on.
General information on entering the BIOS boot menu
Manufacturers provide special keys both for entering BIOS or UEFI, and for calling the Boot Menu. In the first case, it can be Del, F2, or the combination Alt + F2... The second can be used Esc, F11 or F12, but there are exceptions, which are listed later in the article. Usually, the prompt for the key to enter the Boot Menu is displayed on the screen during computer startup, but this is not always the case.
Features of Boot Menu Boot on Windows 10
On Windows 10 laptops and computers, the above keys may not work. This is because shutdown in this operating system is not exactly that. This process is more like hibernation. Therefore, when using F12, F11, Esc and other boot menu keys may not appear.
In this case, one of the following methods can help to enter the Boot Menu:
How to call the Boot Menu on Asus
In the case of Asus motherboards, you can enter the Boot Menu using the key F8 immediately after turning on the computer. Actually, as when trying to enter BIOS or UEFI with the keys Del / F9... On ASUS laptops one of the options can be used - entering the Boot Menu by pressing F8 or Esc.
How to enter the Boot Menu on Lenovo laptops
On almost all monoblocks and laptops from Lenovo, the key is responsible for launching the Boot Menu. F12... It, like on other devices, must be pressed when turned on. There are also models where a separate small arrow button is provided to enter the boot menu. It is often located near the power button.
How to open Boot Menu on Acer laptops
Acer laptops and all-in-ones have a single key to enter the Boot Menu - F12... However, you can enter this menu only after enabling a special option. To activate it, when you start your computer, you need to get into the BIOS using the key F2 and change the state Disabled on the Enabled opposite point F12 Boot Menu in the main BIOS parameters.
Other laptop and motherboard models
Below is a list of keys for entering the Boot Menu on laptops and PCs with motherboards from different manufacturers.
Motherboards:
- Gigabyte - F12.
- MSI - F11.
- Intel - Esc.
- AsRock - F11.
- American Megatrends - F8.
Laptops and all-in-ones:
- HP - F9, or Esc, and then the F9 key.
- Dell - F12.
- Samsung - Esc.
- Sony - F11.
- Toshiba - F12.
- Packard Bell - F12.
Boot Menu is a menu that allows you to select the device that the system will process first. This function is actively used to replace operating systems and to carry out diagnostics, such as RAM with MemTest.
This function is extremely convenient, as it is intended for a one-time launch of the equipment, as the main carrier. This same function is required when installing Windows, as it does not require changing priorities.
After completing the actions required to enter the menu, all devices that are connected at the current time in the computer, and with which the program is potentially likely to start, will be displayed.
Unfortunately, there is no one denominator in the question of entering the described menu, since there is no hard standard in this industry yet. Nevertheless, there is a dependency between the manufacturer and the actions required to launch the Boot Menu, which will be discussed in detail in the article.
General information on entering the Boot Menu
Boot Menu is used to specify from which device the program should be launched. Of course, the BIOS already has such functionality, but for one-time use, for example, a program, it is better to use the boot menu.
An interesting question is how to call up the boot menu on the motherboard because there are no standards in this regard. Each manufacturer uses different options. Most often, a hint appears on how to go to a section. In general, the buttons F8, F9, F11, F12 and Esc are used.
To launch the desired menu, press the key corresponding to your brand of motherboard during system startup. Often, several of the above buttons are used. You can get more accurate information by going to the section corresponding to the manufacturer of your computer.
There are also slight differences in launching the required menu in monoblocks and laptops that have Windows 8 and higher preinstalled.
How to enter the boot menu on a netbook? - To complicate matters, laptop computers might not use a full shutdown, but hibernate instead. This option is quite justified, since it returns the PC to a working state faster, but is not suitable for entering the menu. All you need to do is turn off the netbook completely, hold down Shift and click on "Shutdown". If this does not help, then you need to configure the "Power supply" section.
Launching Boot Menu in Windows 8, 8.1, 10
The thing is that personal computers in this configuration most often use hibernation mode instead of the usual shutdown. Often this has a positive effect on the boot time of the system, and the processes launched in the last session are restored, but in this case this method is not suitable for us, to do this, use one of the following options:
1. Restart the computer using the appropriate option in the menu, you do not just need to turn off the button and turn it on again, for the reason just described;
2. At the moment when you press the "Shutdown" button, hold down the Shift key, thanks to this procedure, the PC will turn off fully, then press the desired key at the time of startup;
3. You may need to disable Fast Startup.
- Open the "Start" menu;
- Go to "Control Panel";
- Select the tile with the name "Power Supply";
- Follow the link "Actions of the power buttons";
- Disable the "Quick Start" item.
After completing these steps, at the time the system starts, you will need to press the required key, usually Esc, F8, F9, F11, F12. More detailed information on your motherboard model is indicated below in the corresponding paragraph.
Entering the Boot Menu for the manufacturer Acer
This manufacturer on all configurations of computers, all-in-ones and laptops uses the same key to enter the Boot Menu, this button is F12. A distinctive feature is only an item in the BIOS or UEFI, which includes the necessary handler, that is, nothing will happen until you enable this function, sometimes it works by default, for this:
1.Go into BIOS, for this boot press F2 or Del;
2. Find the item "F12 Boot Menu";
3. You need to replace the value with "Enabled";
4. Restart your computer.
After performing these manipulations, the boot menu should become available by pressing F12.
Boot Menu for Asus
For the vast majority of computers at the base of which this platform is located, you need to press F8 to launch the Boot Menu, but with laptops everything is a little more complicated, there is some division here.
For most Asus laptops, the Esc button is used, but this is more likely for more or less modern PCs, and for models that start with K and most with X, F8 can be used.
Entering the Boot Menu in Lenovo Laptops
It is quite easy to go to the menu of interest thanks to the F12 key, it is used in all models. This situation also applies to monoblocks from the same manufacturer. A distinctive feature is a special button located on the case, next to the standard inclusion, usually a circular arrow is drawn on it, by clicking on it you can get to the menu of special options for starting the system.
Information on other manufacturers
For most manufacturers, it makes no sense to describe the instructions for switching to the Boot Menu, since the only difference is the required key, and everything else works according to the standard scheme, so:
- Dell, Toshiba laptops and Gigabyte motherboards - F12;
- Samsung laptops and Intel motherboards - Esc;
- HP Laptops - F9;
- AsRock and MSI Motherboards - F
This should be enough to launch the Boot Menu with any configuration of the computer, if you have a little-known manufacturer, you should use the instructions that should be presented on the manufacturer's website.
If you still have questions on the topic "How to enter the Boot Menu on a laptop and computer?", You can ask them in the comments
if (function_exists ("the_ratings")) (the_ratings ();)?>
Want to boot your computer from a flash drive or disk? To do this, you do not need to go to the BIOS settings. Especially if you don't understand much about this. There is an easier way. In this case, it is enough to enter the Boot Menu and change the boot priority of devices. This is done in 10 seconds. And most importantly - no shamanism in BIOS.
What do users usually do to reinstall Windows? Typically, a licensed digital copy is recorded on, and then executed.
How to call the Boot Menu
It's very simple - to click one key when Windows starts. Which one? It depends on the:
- BIOS versions;
- motherboard;
- laptop models.
That is, the situation is exactly the same as with BIOS. For example, so that you need to press the Del or F2 button, and to open the Boot Menu, you need to click another.
Most often it is Esc or F12. Although, as mentioned above, the call button may differ on different PCs.
Launch Boot Menu on PC with mat. Asus board as easy as shelling pears
You must press the F8 key when it boots (at the same time when you usually enter the BIOS).
Most often this is the Esc button, although it could be F8. However, there are only 2 keys.
Boot menu on Acer opens by pressing F12
But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:
- Go to the "Main" tab.
The system will reboot and you can enter the boot menu on your Acer laptop using F12.
On Samsung, you need to press the Esc key. But Samsung laptop owners need to know one feature. The fact is that to call the Booth Menu, you need to click the Esc button once! If you double-click, the window will simply close.
Therefore, you have to get used to knowing exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts.
HP also has its own specifics
Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out in a slightly different way.
- Ready.
After that, the boot menu of the HP laptop will open, and you can set the priority of turning on the devices (using the arrows).
Boot menu on Windows 10 or 8
If Windows 8 or Windows 10 is installed on a PC or laptop, then you most likely will not be able to turn on the Booth Menu.
The fact is that these operating systems have a small peculiarity - by default, they have Quick Start enabled, so they are not turned off completely. This is called hibernation (kind of like sleeping). Therefore, when you boot your PC or laptop, you will not be able to open this menu on Windows 10.
- Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can launch it on Windows 10 by pressing the desired key.
- Instead of shutting down your PC, you can restart it. And at the moment of switching on, simply press the specific key corresponding to your brand of laptop or motherboard.
For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs.
For example, for computers running on mat. on the MSI board, this is the F11 button. And the launch of the Booth Menu on Sony VAIO laptops is carried out using F12. In general, you will figure it out for yourself - the table is simple and straightforward.
Want to boot your computer from a flash drive or disk? To do this, you do not need to go to the BIOS settings. Especially if you don't understand much about this. There is an easier way. In this case, just go to the Boot Menu and change the boot priority of devices. This is done in 10 seconds. And most importantly - no shamanism in BIOS.
Boot Menu - what is it
What do users usually do to reinstall Windows? As a rule, they write a bootable USB flash drive through UltraISO, and then configure the BIOS to boot from the USB flash drive. In principle, this is not difficult, but there is a simpler option - calling the Boot Menu. What's this?
Boot Menu (or boot menu) is an extremely useful BIOS option. It can be used to quickly set the boot priority of devices. Simply put, launching the Boot Menu brings up a small window in which you can immediately put a USB flash drive (or DVD) in the first place, and the hard drive in the second. In this case, you will not need to enter BIOS.
In addition, changing the settings in the Booth Menu does not affect the BIOS settings. That is, this option is triggered once - for one activation. And when you restart your PC, Windows will boot from your hard drive (as usual). If you again need to start the installation of Windows from a USB flash drive, call the Boot Menu again.
If you remember, when you changed the settings in the BIOS, you had to go into it again and change the boot priority of the devices back (i.e. put the hard drive in the first place). And in the case of Booth Menu, this is not necessary.
How do I open the Boot Menu? It's very simple - to click one key when Windows starts. Which one? It depends on the:
- BIOS versions;
- motherboard;
- laptop models.
That is, the situation is exactly the same as with BIOS. For example, to turn on the BIOS on a laptop, you had to press the Del or F2 button, then to open the Boot Menu, you need to click another.
Most often it is Esc or F12. Although, as mentioned above, the Boot Menu button may differ on different PCs.
Therefore, below we will consider how to run Booth Menu on popular brands of laptops and personal computers.
How to enable Boot Menu on Lenovo laptops
Lenovo laptop owners shouldn't have any difficulties. After all, the Boot Menu on Lenovo is launched very simply - by pressing the F12 key when Windows starts up.
Plus, on the case of many models there is a special button with a curved arrow. You can click it if you want to select additional. download options.
How to open Boot Menu on Asus
It is immediately worth noting here that there are Asus motherboards (installed on a PC) and laptops of this brand.
Run the Boot Menu on the computer with the mat. Asus board is as easy as shelling pears - you need to press the F8 key when it boots (at the same time when you usually enter the BIOS).
And there is a bit of confusion with Asus laptops. It seems that the manufacturer is the same, but there are several buttons to launch the Booth Menu. After all, the launch of the Boot Menu on Asus laptops is carried out using one of two keys:
Most often this is the Esc button, although it could be F8. However, there are only 2 keys, so you will quickly figure out which one is responsible for launching the Boot Menu on your Asus laptop.
How to bring up the Boot Menu on Acer laptops
Boot Menu on Acer is opened by pressing the F12 button. But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:
- Go into the BIOS (when you boot the laptop, press the F2 button).
- Go to the "Main" tab.
- Look for the line "F12 Boot Menu" and change the value "Disabled" (disabled) to "Enabled" (enabled).
- Save the changed parameters and exit the BIOS.
The system will reboot and you can enter the Boot Menu on your Acer laptop using F12.
How to enable Booth Menu on Samsung laptops
To bring up the Boot Menu on Samsung, press the Esc key. But Samsung laptop owners need to know one feature. The fact is that to call the Booth Menu, you need to click the Esc button once! If you double-click, the window will simply close.
Therefore, you have to get used to knowing exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts, and you will go to the Boot Menu on a Samsung laptop.
How to enter Booth Menu on HP laptops
Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out in a slightly different way. To enter the Boot Menu on an HP laptop, you need:
- When you turn on Windows, immediately press the Esc key.
- The startup menu will be displayed - press the F9 button.
- Ready.
After that, the Boot Menu of the HP laptop will open, and you can set the priority of turning on the devices (using the arrows).
How to enter Boot Menu on Windows 10 or 8
All of the above methods allow you to run the Boot Menu on Windows 7. If Windows 8 or Windows 10 is installed on your PC or laptop, then you most likely will not be able to turn on the Boot Menu.
The fact is that these operating systems have a small peculiarity - by default, they have Quick Start enabled, so they are not turned off completely. This is called hibernation (kind of like sleeping). Therefore, when you boot your PC or laptop, you will not be able to open the Boot Menu on Windows 10.
There are three ways to fix this:
- Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can launch the Boot Menu on Windows 10 by pressing the desired key.
- Instead of shutting down your PC, you can restart it. And at the moment of switching on, simply press the specific key corresponding to your brand of laptop or motherboard.
- Disable Fast Startup. For this:
That's it - now you can easily enter the Boot Menu on Windows 10 or Windows 8.
List of keys to enter the Boot Menu
For your convenience, below is a screenshot showing the keys to launch the Boot Menu for popular laptops and PCs. For example, for computers running on mat. on the MSI board, this is the F11 button. And the launch of the Booth Menu on Sony VAIO laptops is carried out using F12. In general, you will figure it out for yourself - the table is simple and straightforward.
Also, for convenience, buttons for entering the BIOS are written. If for some reason you cannot open the Boot Menu, you can always change the boot priority of devices in the standard way - through BIOS.
Good day to all.
When installing Windows (for example), it is very often necessary to select a bootable media other than the hard drive. This can be done in two ways:
1) Go to the BIOS and change the boot queue (i.e. put the USB flash drive in the boot queue in front of the HDD - this way the PC will first check the USB flash drive for boot records, and only then the hard drive);
2) Call the Boot Menu and select a specific boot medium in it at the moment. In my opinion, this option is even better than the first one: it's faster and you don't need to go back and forth in the BIOS to change the boot queue.
To enter BIOS (call Boot Menu) in most cases, the keys are used: F2, Del, Esc, F12 (depending on the manufacturer of the device). You need to press the button immediately after turning on the computer (you can several times so as not to miss the right moment.
By the way, if you look closely at the first screen, which is visible immediately after turning on the computer, then a button is often written on it to enter the desired settings (call the menu). An example is shown below.
Rice. 1. Dual Bios. DEL button - enter BIOS settings, F12 button - Call the Boot Menu.
Table 1: hotkeys for computers
To use the table - you need to know which motherboard you have, the BIOS version. You can find out in several ways, I will give the fastest:
A simple free program that will tell you a lot about your hardware. For example, you can find out information about: processor (CPU), RAM (Ram), motherboard (Motherboard), video card (Graphics), HDD drives, SSD (Storage), etc. In addition, you can find out and control the temperature online main components: hard drive, video card, processor.
A screenshot of the operation of this utility is shown in Fig. 2.
Rice. 2. Speccy - getting information about the motherboard
Table # 1
| Motherboard | BIOS version | Hotkey | Which menu will be open |
|---|---|---|---|
| Acer | Del | Enter Setup | |
| F12 | Boot Menu | ||
| ASRock | AMI | F2 or DEL | run Setup |
| F6 | Instant Flash | ||
| F11 | Boot Menu | ||
| TAB | switch Screen | ||
| Asus | Phoenix-Award | DEL | BIOS Setup |
| TAB | Display BIOS POST Message | ||
| F8 | Boot Menu | ||
| Alt + F2 | Asus EZ Flash 2 | ||
| F4 | Asus Core Unlocker | ||
| BioStar | Phoenix-Award | F8 | Enable System Configuration |
| F9 | Select Booting Device after POST | ||
| DEL | Enter SETUP | ||
| ChainTech | Award | DEL | Enter SETUP |
| ALT + F2 | Enter AWDFLASH | ||
| ECS (EliteGrour) | AMI | DEL | Enter SETUP |
| F11 | BBS POPUP | ||
| FoxConn (WinFast) | TAB | POST Screen | |
| DEL | SETUP | ||
| ESC | Boot Menu | ||
| GigaByte | Award | ESC | Skip memory test |
| DEL | Enter SETUP / Q-Flash | ||
| F9 | Xpress Recovery Xpress Recovery 2 | ||
| F12 | Boot Menu | ||
| Intel | AMI | F2 | Enter SETUP |
Table number 2: hotkeys (Bios / Boot Menu, etc.) for laptops
Note: on modern laptops, the key combination in Windows also works: hold down the SHIFT button + select the restart button with the mouse.
Boot Menu is a small window in which using the mouse (arrows on the keyboard) you can select the device from which to boot. An example of such a menu is shown in Fig. 3.
Depending on the manufacturer of your device - the menu may differ slightly, but the principle of operation is the same everywhere.
Table 2
| Laptop manufacturer | BIOS version | Hotkey | Function / menu call |
|---|---|---|---|
| Acer | Phoenix | F2 | Enter Setup |
| F12 | Boot Menu (Change Boot Device, Multi Boot Selection Menu) | ||
| Alt + F10 | D2D Recovery (disk-to-disk system recovery) | ||
| Asus | AMI | F2 | Enter Setup |
| ESC | Popup Menu | ||
| F4 | Easy Flash | ||
| Phoenix-Award | DEL | BIOS Setup | |
| F8 | Boot Menu | ||
| Benq | Phoenix | F2 | BIOS Setup |
| Dell | Phoenix, Aptio | F2 | Setup |
| F12 | Boot Menu | ||
| eMachines (Acer) | Phoenix | F12 | Boot Menu |
| Fujitsu Siemens | AMI | F2 | BIOS Setup |
| F12 | Boot Menu | ||
| Gateway (Acer) | Phoenix | Click mouse or Enter | Menu |
| F2 | BIOS Settings | ||
| F10 | Boot Menu | ||
| F12 | PXE Boot | ||
| HP (Hewlett-Packard) / Compaq | Insyde | ESC | Startup Menu |
| F1 | System Information | ||
| F2 | System Diagnostics | ||
| F9 | Boot Device Options | ||
| F10 | BIOS Setup | ||
| F11 | System Recovery | ||
| Enter | Continue Startup | ||
| Next | F1 | Boot-Menu Call | |
| F2 | BIOS setup | ||
| Lenovo (IBM) | Phoenix SecureCore Tiano | F2 | Setup |
| F12 | MultiBoot Menu | ||
| MSI (Micro Star) | *** | DEL | Setup |
| F11 | Boot Menu | ||
| TAB | Show POST screen | ||
| F3 | Recovery | ||
| Packard Bell (Acer) | Phoenix | F2 | Setup |
| F12 | Boot Menu | ||
| Toshiba | Phoenix | Esc, F1, F2 | Enter Setup |
| Toshiba Satellite A300 | F12 | Bios |
Table 3: recovery from a hidden partition (for laptops)
Most modern laptops have a special hidden partition with the ability to restore Windows using a "pair" of keys (no need to prepare a bootable USB flash drive, download ISO images from Windows, etc.).
As a rule, to start the recovery function - after turning on the laptop, just press one key (F9, for example, on Asus laptops). Next, a window will appear in which you need to follow the instructions of the recovery wizard.
Note: when restoring information, the system drive "C: \" is often formatted and all information from it is deleted. Make a copy of important data from it in advance.
Rice. 4. ACER Laptop - Recovery Service Utility
Table 3
| Laptop manufacturer | Button combination | Note |
|---|---|---|
| Acer | Alt + F10 | First you need to enter the laptop Bios, and enable the D2D Recovery function. In the recovery system, by default, the password is set to 000000 or AIM1R8. |
| Asus | F9 | |
| Dell Inspiron | Ctrl + F11 | |
| Fujitsu Siemens | F8 | |
| HP | F10, F11 | |
| Lg | F11 | |
| Lenovo ThinkPad | F11 | |
| MSI | F3 | |
| Packard bell | F10 | |
| RoverBook | Alt | |
| Samsung | F4 | |
| Sony VAIO | F10 | |
| Toshiba | F8, F11 |
PS
The tables will be updated (over time). For additions on the topic of the article - a big merci in advance. Good luck to all!
Hello! Today I rested all day, Sunday same. But in the late afternoon I thought that I needed something useful to write to my blog. I began to think what I hadn’t written yet, and what could be useful to you in the process of solving various computer breakdowns, and then the thought came that I had already written about that, and how I also wrote in it, but there is also a way by which, when turned on computer can select device to download without having to enter BIOS. I will write about this, I am sure that this advice will be useful to many.
You often have to choose from which device you need to start the computer. For example, you want, or just boot your computer from the boot disk to scan your computer for viruses. And to do this, you have to go into the BIOS, look for where this item is located in which the boot order is set, and on different computers it is all done in different ways, and many at this stage abandon the idea of repairing the computer on their own. from a CD / DVD disk, or a flash drive, you can do without changing the settings in the BIOS. And now I will tell you how to do it.
Selecting the boot device when turning on the computer
We insert the disc into the drive, or connect the USB flash drive. We restart the computer and as soon as it starts to boot, press the key F11.
A window will appear "Please select boot device:", in which using the up and down arrows we select the device we need from which we want to boot, and confirm our choice by pressing "Enter". As you can see, I have the ability to boot from a drive, a flash drive and of course a hard drive.
Which device you choose, from this one the download will go. As you can see, everything is much easier than digging into the BIOS settings. If nothing happens when you press F11, then there are at least two options:
- You have a USB keyboard, and the BIOS settings have disabled support for such keyboards when the computer starts up. You need to connect a regular keyboard, and already with its help go to BIOS and in the Integrated Peripherals item, find USB Keybord support and set the Enable value. After that, your USB keyboard should work.
- And the second case, it's just that you have a different key installed to call up the boot device selection menu when you turn on the computer, or simply this function is disabled in the same BIOS. For example, in Acer laptops in the BIOS there is an item “F12 select boot device” (or something like that), which must be enabled by setting Enable. After that, the menu will be called by pressing the F12 key.
It seems that he wrote everything, there will be questions, ask. Good luck!
