--------
Nokia N91-1 certain circumstances single prolonged Music player ".
BUT
1020e4fe.cre
P.S. I decided to write about the solution to this problem here, and not in the comments to the files, so that this solution is not lost anywhere and goes into the treasury of knowledge
DimonVideo DimonVideo
The object is not available. Restored std. key function
---------
This is the 2nd time since using the good old Nokia N91-1 faced this seemingly small, but, nevertheless, very unpleasant problem - when certain circumstances phone refuses to answer single pressing the MM key (MultiMedia) while prolonged pressing - launches Visual Radio. And only in the target application ( Music player ) the smartphone somehow responded: " The object is not available. Restored std. key function. ".
BUT served under certain circumstances: for the first time - half-dead charging, which sometimes charged the phone, then not, and the second time - exactly the same state as charging, mini-usb cable. And, interestingly, in addition to the fact that the MM-key ceased to perform its function, phantom files also appeared on the hard drive of the device:
Attention! You do not have permission to view hidden text.
And if there were no problems with the solution of the latter, but with the first question it was not so simple -. And I didn’t really want to solve the issue with a hard reset of the phone, as I did it the first time out of desperation - you won’t deal with this disgrace every time: D
So I had to look for alternative ways. To begin with, I tried to use the program for reassigning keys, but I did not find what I needed in it. I decided to try as the author advises - again a mistake, Anykey.exe was not going to do what I expected from him. As a result, I came to this -, first, of course, having unlocked the smartphone. But even this did not give the desired result - well, still, if I try to make the phone do what it already has, I don’t add anything new (I don’t need any third-party programs on MM, I just need a Music player ). But right here - C:/private/10202be9/persists/- I found a very interesting file called 1020e4fe.cre . And curiosity played in me - having previously backed it up, so, just in case, deleted it from the disk. And ... About a miracle! I didn't even have to reboot the phone, as he responded to a single press of the multimedia key and showed the coveted Music Player. On this, my torment was over and, having received satisfaction from the result, despite a lot of free time spent, I went to share a small but pleasant find exactly here
It happens, after all, I really hope that this small, but extremely useful little note will help someone, and the comrade will not have to hard reset your device once again;)
P.S. I decided to write about the solution to this problem here, and not in the comments to the files, so that this solution is not lost anywhere and goes into the treasury of knowledge ">
For novice developers of 1C 8.3, it is difficult to understand why they get an error so often - The field of the object is not available for writing 1C (Working Date, Code, Table, Number, Date, etc.). Let's figure out why this error may appear, and how to deal with it.
If you have no idea what programming is, then it's better not to touch anything. Most likely, the programmers who finalized your configuration simply made an unfortunate mistake. Just call the specialist who worked with you. This error is solved quite quickly (if it does not entail other, more complex problems). If contacts with personal programmers are lost, you can contact our highly qualified professionals, details on the page -.
If an error occurs after configuration updates 1C 8.2 or 8.3, more likely, You need to last current version.
Get 267 1C video lessons for free:
If you are a beginner 1C programmer
Generally speaking, you are trying to change data in the program code that you do not have the right to change. Let's consider specific cases:
Change the object, not the link
Topping the list of causes for this error is an attempt to assign new attributes to an element reference. They usually do it like this:
Petrov = Reference books. Individuals. FindByName("Petrov Ivan" ) ; Petrov. Passport Number = "2156363" ;
And at this moment, the beginner receives an error - The object field is not available for writing 1C.
It should be clear: it is only possible to change the properties and details of an object. In this case, the variable "Petrov" contains the so-called. "link" - a unique identifier in the database, with the help of which the system maintains uniqueness. And what is available to us “by point” (Petrov.Passport Number) is just the convenience of 1C enterprise, and in fact, any “point” is another request to the database.
The correct solution to the problem:
PetrovLink = Reference books. Individuals. FindByName("Petrov Ivan" ) ; PetrovObject = PetrovReference. GetObject() ; PetrovObject. Passport Number = "2156363" ; PetrovObject. Write() ;
Attempt to change system fields
The second most popular reason for this error is an attempt to change details that cannot be changed.
- row number of the tabular section;
- use CurrentString instead of CurrentData;
- etc.
In December 2012, an event took place that many users of Apple devices in Russia and the CIS countries were looking forward to -. However, law-abiding residents of Russia have already managed to create American accounts for themselves, which allowed them to buy music and other content that is not available in the Russian App Store.
This account required the binding of one-time virtual bank cards or the purchase of gift certificates, since cards from Russian banks were simply not supported in the US iTunes Store.
With the advent of a full-fledged iTunes Store in Russia, the need for an American account disappears by itself. This guide will help you change the country of your current Apple ID.
In addition to obvious advantages, such as support for domestic bank cards, changing an account also has negative aspects:
1. You will need to spend all the money in your account and cancel your iTunes Match subscription.
2. If you change the store country, you will lose the ability to automatically update content purchased from the US Store. That is, you can go to the application page and click the update button, but programs will not appear in the updates section.
3. You will not be able to download content (games, programs, etc.) to your device that is not available in the Russian iTunes Store.
4. When going to the Russian store, you will need to enter the details of a bank card valid in Russia. Worst case, they'll do.
Now let's go directly to the instruction itself:
"Resetting" an account
If your account has an amount that is a multiple of 99 cents, then you can simply buy applications. If the amount is less than 99 cents, then you will have to write a letter to Apple support.
To do this, launch iTunes on your computer and select the item on the right support.
Then, in the window that opens, click the button again. support. After that, the Apple page will open in the browser, where in the menu on the left you need to select the lowest item - "Contact Support". Next click on the link "Contact iTunes Store support".
On the page that opens, select "Account Management", check box "The topic is not listed" and in the field below enter the subject of the request: write off the balance of the account or cancel the iTunes Match subscription. After pressing the Enter key, solutions will be searched and after that the Email button will appear, which you will need to click on.
Then a page will open where you will need to enter your personal data: first and last name, contact email and email that you use to log into your Apple ID. All data must match the data specified when registering an American account. On this page, you also need to indicate the reason for the appeal.
After clicking on "Continue" You will be given an individual case number, and a message will appear on the mail you specified that your claim has been registered with iTunes support.
About a day later, a message will be sent to the mail with a notification that funds have been debited from the account. After that, you can start changing the country in the store.
Unsubscribing from iTunes Match
If your American Apple ID has been subscribed to the iTunes Match service, then you must first download the entire library to your computer from iCloud and follow all the steps in the same way as when debiting funds. But as the subject, specify: "disable iTunes Match subscribition". After that, a support person will contact you and notify you that your content will not be available after canceling the subscription, and will offer you a refund of the remaining months of using the service. It is necessary to reply to this e-mail that you have downloaded all your songs and want to receive compensation.
Sample text: "Hello. I'm sure I want to cancel my iTunes Match subscribition and I want to receive a partial refund."
Consideration of this application may take several weeks. Since support is required to agree on a partial refund to your account. After receiving the letter, the money will go to your Apple ID within a week, after which it will need to be spent in full to change the country.
Change country in the iTunes Store
Click on the Apple ID on the left and select the item in the drop-down menu "Account".
On this page we are looking for an item "Change Country or Region".
Choose from the list Russia and press the button Change, then "Continue", then agree to the terms of the iTunes Store and click the button "To accept". After that, you need to enter your payment information. After that, you can safely use the Russian App Store and Music from Apple. In order to download a program already purchased in the US Store, on the page with a description of the program, you must click the "Buy" button, while the system will inform you that the update is free, since you already have a previous version of this object. In this case, this program will not be displayed in the purchase history, therefore, updates will not automatically appear.
While using the application, the user often encounters a "polite" window warning about the occurrence of a particular error. Such errors are also generated during attempts to open a photo or send it to a friend. One such error is the message: "This photo item is no longer available on Viber." What is behind this message?
This photo element is no longer available on Viber: what is it?
Behind many error messages is usually a handler that throws an exception that indicates that the application cannot handle the problem. If a Viber user uploads photos from the Internet and tries to send a photo that has not yet been fully loaded, then Viber is forced to report that this photo is not yet available to him. It does not have access to the photo, which is occupied by another process - the upload process.
Another illustration for this error would be a deleted photo. Once a smartphone user launched Clean Master on his device to clear his memory of unnecessary (temporary, cached) files.
A conscientious master took and cleared all the files, including some of the photos that Viber had access to. The cleaning took place in accordance with the settings and it is foolish to blame the wizard for the careless deletion of Viber's files.
After the user launched Viber again, he saw that in the place where the necessary files once were, Viber shows crossed out pictures. When trying to open such a picture, the user inevitably received a response about its unavailability.
This photo element is no longer available on Viber: Possible Solutions
As you can see, there are plenty of situations that cause the error “This photo element is no longer available on Viber”. At the same time, the level of complexity for solving such situations is quite high.
To solve the issue with an error about the situation with sending photos on upload, obviously, you only need to follow a few steps:
- Wait for the full download of the photo from the Internet.
- Go to the downloads folder on your mobile device.
- Copy the downloaded images to the folder where the custom Viber images are stored. So we will allow Viber to access these images.
- Send searched photos to a friend.
In another situation, the solution would be to create a backup of Viber's data: contacts, files that this application works with, including photos. A backup is created in case of unforeseen situations, as happened with a user who launched Clean Master and accidentally deleted the files that Viber was working with. Careful handling of the program will allow you to avoid errors like “This photo element is no longer available in Viber”.
Surely many of you have encountered the error Program loading failed. program<Имя программы>failed to load at the moment. This error occurs either during the installation of the application from the App Store or during its update.
Moreover, the error is characterized by the fact that it is not clear by what algorithms it occurs. For example, I can update 50 programs, 47 will update normally, and 3 will show this message.
Cause: in most cases, this message means some kind of problem with the Internet or the App Store.
What to do?
Step 1: The most obvious
Try clicking the "Again" button. There is a chance that the application will still load.
Action 2
Click the button Ready. The app will stop loading. Go to the App Store section Updates. And push the button Refresh next to the problematic application.
Perhaps the second time the update should be run in a few minutes. If at the moment there are any problems with communication, then it is worth waiting.
Action 3
If the application hangs and clearly does not want to be updated, you can delete it and re-download it in the App Store. I do not recommend doing this if there are any documents in the application or it is a game whose save you do not want to lose.
Action 4
Action 5
Also, as a good option, you can consider re-login to the App Store. In the Selection section, scroll to the bottom. In the lower left corner, click on the button with your account. Click Sign Out (or Sign Out). Then again click on the button in the lower left corner. In the window that appears, enter your Apple ID and password.
Action 6
A radical but effective solution to the problem -. Since most people's ip is not static and will change after a reboot, this might help. Your ISP may be having some connectivity issues.
Outcome:
If nothing helps, but at the same time, your applications were previously loaded and updated without problems, then these are some problems either on the provider's side or on the Apple side. I recommend just waiting a few minutes / hours until the situation is resolved. At this time, you can try to update the application or download again and see if the problem is gone.
