How to return to a USB flash drive what you deleted. How to recover deleted or damaged data from a USB flash drive

Successful data recovery depends on a number of factors, but if there is any suspicion of loss, it is better to stop using the device immediately to prevent further damage. With this in mind, do not forget to download software and other important information to a system other than the one from which you are trying to recover files. The methods below will allow you to use the damaged device and overwrite the data you are trying to recover.

In addition to this, if your media is physically damaged, do not try to reanimate it yourself. Instead, contact a data recovery specialist who will give you some advice on next steps.

How to recover deleted files from a flash drive using Ontrack EasyRecovery

If you are sure that there is no physical damage to the media, then try using a program called Ontrack EasyRecovery to recover lost information. Shown below is how to reanimate deleted files step by step using this tool. We have deleted some photos from the USB stick and we will use the above utility to get them back.

Step 1. Select file type

First of all, you need to select the type of files to be restored. If you know which ones have been deleted (for example, a Word document or a JPG image), then before proceeding with the restore operation, check if the selection is enabled or just check "All data".

Step 2. Select a device or its location

Then determine the drive or location from where you want to recover important information. Ontrack EasyRecovery utility is capable of recovering data from a variety of devices and folders, including internal hard drive, SSD, SD cards, and USB. The only requirement is that they must be recognized by the system as a “removable multimedia device”.

Just plug in your external drive, select from the list and start scanning. Otherwise, the system will not recognize it because it will not be able to read it. Then you need to contact your local data recovery specialist or get further advice.

Step 3. Start Scan

Now, to start the process of searching for files, click "Scan". First, the program will launch a "Quick Scan", which will try to find the lost data as soon as possible. If you want to conduct a more thorough analysis, then when prompted, select the "Deep Scan" option, or if you do not have the necessary files, do it later.

Depending on the state of your device and the amount of data stored on it, it may take very little time for the process to complete. As shown in the image above, you will be able to see the current state of the scan, including how much data has been identified and how much time is left before it ends.

Step 4. Save important files

Finally, after the analysis is complete, the program will display a list of all data to be recovered. Note that in the upper left corner of the window there are filters for "File Type", "Hierarchy View" or "List of Deleted Files". The latter will only show the lost data that has been identified and will ignore all others.

You can view all files found by the software by simply clicking on them in the list. This is very handy when you want to recover specific photos, videos, or documents. To find specific names, try using the search bar in the upper right corner of the program.

Then just check the boxes to the left of the required files or folders and click "Recover". The utility will prompt you to select the location of the recovered data. Always choose a location different from where the loss occurred. If you are trying to reanimate files from a USB drive, save them to a folder on your desktop or in your documents.

If you do not have time to recover data, simply close the software and you will be prompted to save the results obtained first. Then, instead of restarting the scan, use the Resume Recovery button (top toolbar) to select where you left off last time.

After restoring all data, check it carefully and make sure you haven't missed any files or folders. If you suspect that something is missing, try running Deep Scan. So, to get the best results, the program will spend a little more time analyzing your device. As a result, all important information will be re-extracted without loss or damage.

How to recover deleted files from a USB flash drive using TestDisk

The following steps show you how to reanimate important data from a USB drive using the TestDisk utility.

In this example, we will be recovering a text file and an image.

Important! This method will not work on a formatted one. Recovery can go wrong. Perhaps you only partially reanimate the file (s) (as a result, you will receive a damaged copy), or you may not restore it at all. With any hope of recovering deleted data, you should stop the process on the USB drive immediately. This means that you cannot run TestDisk from a USB flash drive, otherwise all files will be lost completely. Most likely, the device uses the FAT32 partition format. If you cannot recover the names of the deleted files, then they will be named randomly. This is because FAT32 stores titles separately.

  1. Download TestDisk. Extract the zip file.

  2. Browse the extracted folders and run "testdisk_win". A black command prompt window will open.

  3. Press Enter when prompted. This will create a new syslog.

  4. Now the program will check the drives connected to the computer.
  5. Use the arrow keys to select the drive from which you want to recover the deleted file (s) and press Enter.

  6. Find the type of partition. Most likely, it will be "Intel". Hit enter

  7. Select "Advanced" and press the enter key again.

  8. Using the up and down arrows, find the section where the files are stored.
  9. Use the same keys to select the "Undelete" option. Press Enter.

  10. The window will list the data to be recovered. To reanimate all of them press "a".
  11. Hold Shift + C.

  12. Press C to save the default directory.
  13. Now the window will read “Copy complete!” And hopefully there won't be any problems.

You will find the recovered files in the same folder as testdisk_win.

Video - How to recover data from a USB flash drive

If important data on the flash drive was lost for some reason, you should not immediately order an expensive recovery from a computer company. There are a number of ways to recreate it yourself at home. The sooner this is done after removal, the higher the likelihood of getting it unchanged.

Reasons for data loss

Data that was stored on a USB flash drive can be deleted for several reasons:

Mechanical

Due to accidental or deliberate physical damage to the carrier itself (the controller broke, everything melted, etc.), the stored information is almost irretrievably lost. You can try to give it to a specialist, but the price of such resuscitation, as well as the probability of receiving it, is very low.

Hardware

Anything stored on the media can be lost forever due to the powerful magnetic field.

Program

Using the commands of the context menu or special buttons, files disappear from the visibility of the user. Most often, they are still on the carrier and for a certain time they can be obtained for your use using special software.

Recovering data on a USB flash drive

As soon as it became clear that the information lost from the USB memory is needed, it is worth stopping all manipulations with the media. We don’t write anything on it, we don’t delete it, and of course we don’t format it. The sooner you start searching after deleting, the more chances you have to get your materials back.

You need to understand that the lost files are on the media, but they are invisible. But everything that will be written to it again, deleted or any other manipulations (creating folders, copying, moving, etc.) will lead to the fact that new objects will be placed on top of the necessary data, and the important part will disappear irrevocably.

Recovery algorithm

Regardless of the type of documents, the timing of deletion and the program used, you need to follow a clear algorithm of action:

  1. stop all manipulations with the flash drive;

Anything that is written, copied or deleted from this drive can be placed over the erased objects, and this will make it impossible to resume.


Run a USB scan using any antivirus program. Then change the settings so that hidden objects become visible.

The method may differ depending on the system, but, in general, the following menu items should be performed:

Start - Control Panel -(this item may differ slightly) Appearance and themes -(sometimes parameters) Folder Options - Show hidden folder files.

Now you can see if the necessary documents have appeared on the USB flash drive. If not, then they were definitely deleted.

  1. prepare a place for the recovered data;

In any other place, except for the flash drive on which there will be a search, create a folder in which we place the materials received after resuscitation. Another USB drive or C, D drive will do.

  1. install special software for data recovery.

There are many programs that allow you to more or less get back the lost information. Free ones have limitations (for example, they do not allow working with the entire folder, allowing you to do it one at a time, or others), but in a normal situation these capabilities are quite enough.


It almost always takes about 20 minutes, regardless of whether it is a paid or free utility. It is best to always select all file types and advanced analysis for your search.

  1. indicate the place to save the information received (clause 3);

Check the box and save the received files there. If the entire flash drive is being restored, especially after formatting, then the reserved volume should be equal to the full volume of the drive, even if only a couple of MB of data is recorded there. Likewise, when creating an image when recovering a large USB flash drive.

  1. view recovered data.

Green badges at the found items indicate that the documents have been reanimated completely, yellow ones - partially, and red ones - they are completely damaged. You can try another program.

Photo: the result of the program scan

Simple applications Paint (graphics), notepad (text) and VLC (video and audio), allow you to use even partially recovered objects. We open a partially damaged document with the indicated or similar programs and through "Save As" we get a new file that stores a part of the data ready for editing.

Sometimes even that little bit of data found can be very important.

How to return data

The most popular free developments for this purpose: Easy Drive Data Recovery, R-Studio, Recuva, TestDisk & PhotoRec, R.saver , DMDE. All of these softwares are simply downloaded from their official websites, and the latter two work even without installation.

  • DMDE - restores very high quality, with the resulting file base you can work only with each separately.
  • HDD Raw copy Tool - makes sector-by-sector analysis and a copy of the media.
  • Virtual CloneDrive - creates an image in .img format - suitable for media with a size of 500 GB or more.
  • Recuva - good at restoring photo, audio and video materials. Text and installation documents are practically beyond her power.

If the free version did not help, you can go to the site of a paid utility, for example, Ontrack EasyRecovery Professional, Objectrescue Pro and in demo mode check what this version can find. If you are satisfied with the result, only then purchase the program. Only it will be possible to save the reanimated files.

Video: How to recover data

How to recover data from a flash drive if the computer does not see it

If after the USB drive has been inserted into the computer, it is not detected, you should determine the reason for "invisibility" - in the PC or in the flash drive.

The following reasons for rejection are typical for a computer:

  • the USB port does not work - often it is enough to rearrange it to another port and everything will work. In system units, it is better to use the rear port. This is due to a broken port or a lack of power. If the problem is a lack of power, then you need to leave only the keyboard, mouse and USB flash drive turned on, pull out the speakers and other devices and try again or use another computer for reading;
  • drivers do not work - you need to install appropriate drivers or delete the INFCACHE. It is hidden and is located in the system folder in the DriverStore;
  • unsuitable drive letter - after pressing the Win + R keys, enter diskmgmt.msc and there set your USB drive a letter that has not yet been repeated in any of the media. For this, disk management is selected, using the context menu, the flash drive is made active and a new letter is already assigned to it.

As you can see from the above, returning information after deleting it from a flash drive is a real thing. But a positive outcome can be expected if the new data has not been written with a new layer over the erased data. And this will become clear after scanning the flash memory with special programs. Further, you can save the information in a new place and try to bring it to its original state with the editor, if the file was only partially reanimated.

Start the recovery procedure. To do this, select the area to be analyzed in the program window (in our case, it will be a removable disk). Wait while the program scans the selected media and displays a list of all files available for recovery. The path to it, its size, the date of the last modification, and the approximate status of the probability of recovery are displayed next to the name of the file (or folder). Depending on the settings, the utility can display hidden and system files, as well as display a list of files with zero size. To restore, mark the necessary files and click the "Restore" button after which you will need to specify the location where you want to save the restored folder.

Related Videos

note

It is necessary to save the recovered files to a different disk or medium, as recovery to the disk from which the deletion was performed may lead to an error.

Useful advice

Back up the files and documents you need more often.

Sources:

  • how to recover deleted files on a USB flash drive

Almost every modern person stores some kind of information on flash drives. Some have photographs, while others have work files or a future diploma. Unfortunately, none of us is immune to the loss of this data, no matter how reliable the flash memory may seem. So many have encountered the problem of recovering data from such a medium. flash drives directly depends on how important files were lost.

Instructions

If the user just accidentally or accidentally formatted the data, then special programs will help the files. You can easily try to do it yourself by downloading the necessary program on the Internet. The main thing is not to get confused and not make changes to the media during data extraction. After retrieving the lost file, transfer it directly to your computer.

If it is clearly not working properly, for example, completely, or as empty, or if you damaged the flash drive mechanically - crushed it or got it wet, then you should contact a specialist to restore data. It is very important that if you find a problem, do not take any further action on the. The USB flash drive should be immediately and correctly removed from the computer or camera and no longer work with it - not taking pictures, not writing any data. Remember, in almost any malfunction, data can be restored if, after detecting an error, you immediately stopped working with the flash drive.

Take the faulty flash drive to a computer repair center, where specialists, using a special device (programmer), count all flash memory chips and decrypt them, thus obtaining your lost information. If possible, the computer center will not only restore your data, but also repair the flash card itself. By the way, there are companies that are ready to help you with data recovery around the clock.

The file recently deleted from the computer was suddenly needed urgently. Don't get discouraged ahead of time. There are a few easy ways to get your desired file back safe and sound.

You will need

  • Computer, Recuva or Objectrescue Pro.

Instructions

If you deleted the files by pressing the Del button on, or using the "Delete" item in the command menu, then you did not completely delete them, but only sent them to the Windows Recycle Bin. This is a kind of protective mechanism of the operating system against rash actions of the user. Recycle Bin is a special one into which files are to be deleted. They will remain in the trash until you decide with these files. They can be restored or completely removed. To restore, you need to do the following. Double click on the "Trash" icon. Here you will see the files that have been deleted. Select the desired file and click on it with the right mouse button. In the list of commands that appears, select the "Restore" item. The file from the "Recycle Bin" will disappear, but it will appear in the folder in which it was before deletion.

You may have deleted the file from, that is, deleted it from the "Recycle Bin". In this case, you can recover data using one of the special programs. Among them there are paid ones and there are free ones. As a rule, paid ones have an additional set of functions and a more convenient interface. Let's take a look at both types of free Recuva and paid Objectrescue Pro.

Download the Recuva installation file, install it and run the program. After clicking the "Next" button, you will be taken to the program window, in which you can select the types of files to recover. After choosing the file type, go to the window in which you can mark the disk on which the required file was located. Click on the Analyze icon next to the selected drive. You will be presented with a list of files that can be recovered. Check the boxes you need and confirm with the "Restore" button. An additional window will appear in which you will have to select a location to save the file. Click "OK" and wait for a message about successful recovery. The file has been restored.

Launch the preinstalled and activated Objectrescue Pro program. In the window that appears, click "Next". You will be taken to the area of ​​the program, which contains the disks of your computer. Select the one on which the erased data was located and confirm the selection with the "Next" button. In the next window, you can select the types of files that you want to find. Check the required types with checkboxes. We proceed to the next stage by clicking "Next". You are offered to choose from two types of disk space scanning. The first option "Scan free space only" is much faster than the second, but the chances of finding the file with it are lower. Click next and go to the window for choosing the location for saving the recovered data. You need to select a folder to save on any other disk, except for the one on which you are looking for files. There is also a check mark next to the item for automatic file recovery. You can use this item only when searching for a small number of files. Otherwise, the recovery process can be very delayed. Press the "Next" button and observe the process of searching for files. Upon completion of the search, you can go to the list of found files that can be restored. File icons are marked. To restore files, select them and click the "Restore" button. We can once again clarify the path to save the recovered files. After confirming the actions with the "Ok" button, files are going on. Now you can go to the folder with the saved files and make sure you have all the required data.

Unfortunately, not all files can be restored by an unqualified user. If your actions did not bring the desired result, contact a specialized data recovery company or one of the computer service centers in your city.

Related Videos

note

Only those files that were on the computer can be returned from the Recycle Bin. To recover data from USB drives and CDs, you need to use special programs.

Sources:

  • Piriform
  • recovering erased data

The Windows operating system allows the user to manage personal files stored on a personal computer. In this case, the user can change, delete, copy and transfer personal data. But there are situations when the file has already been cut, but has not yet been pasted into another folder. In this case, the system provides for a file buffering system.

You will need

  • Basic personal computer skills.

Instructions

First, make sure that the file is indeed still cut. To do this, check the directory of its previous location.

If the file is not there, then you may have already moved it to another directory. To search for the transferred file, call the "Start" menu and select the "Search" line there. In the window that appears, enter all the information you know about the transferred file (for example, name, file type or size). After entering all the required data, click the "Find" button. If the file was moved to another folder, the search engine will find it and show the current location.

If the file is in the same folder as before, but its icon is displayed in a translucent form (hidden files and folders), this means that the file is still in the operating system's clipboard. That is, the file is officially still in the same folder, but is ready to be moved. To return such a file, in the main window menu, click the "Edit" button, and in the list that appears, select the "Paste" line. After that, the system will give you a window notifying you of an error when moving (that the selected folder is the source for this file). In this window, click the "OK" button, and the file will be displayed in its usual form again.

Sources:

  • cut folder

Important files, deleted by the user himself, unfortunately, are far from uncommon. Despite the helpful windows with warnings about the consequences, such cases are not decreasing, because most often they are deleted files not needed at the moment. But they may be needed within a day, causing headaches and regret. But do not get upset ahead of time - under certain conditions files deleted from USB drives can be recovered.

You will need

  • USB flash drive with deleted files
  • File recovery software

Instructions

Remember - if you hope to return the lost files, in any case, do not do formatting, this can lead to fatal consequences. Any other manipulations with the flash drive are also undesirable. Meeting these conditions will greatly increase your chances of files can be restored.

The next step is to choose a program that will restore the lost files... Flash Recovery Toolbox is considered one of the best in its class. With this software, you can recover lost data not only, but also from digital, floppy disks, hard drives. There is only one condition - the media file system must be FAT or FAT32. Of the relative inconveniences, it can be noted that the program is paid, but if the number of lost files is small, then it does not matter: in the free version of Flash Recovery Toolbox you can recover and save 5 deleted files.

If you need to return a larger amount of data, another program, Disk Digger, is better suited. It is also not free, but it does not have a limit on the number of saved files, instead, every time before the restoration is completed, a window will pop up asking you to register this program. However, it has one definite plus - Disk Digger is able to recover files from media that have a wide variety of file systems, including such as exFat and NTFS.

The programs of this class also have a free analogue, so if you prefer products of this type, opt for Soft Perfect File Recovery. In addition to the fact that this program is absolutely free, it also combines many advantages of paid analogs, including such as working with almost all file systems, so it can be safely used not only to recover deleted files from, but also from hard drives, and from many other carriers.

Related Videos

note

These programs for file recovery have a fairly simple interface and do not cause problems when using. You just need to select a drive for recovery, wait for the scan to finish and save the recovered files.

Sources:

  • SoftPerfect File Recovery official website
  • how to recover lost files on a USB flash drive

Accidental formatting of a medium with the necessary information is not such a rare phenomenon. However, there is a solution to this problem - the restoration of seemingly lost files forever.

Instructions

Select one of the data recovery programs. Examples include such popular products as UFS Explorer, R.saver, GetDataBack, etc.

Download and install the program of your choice. To do this, run the installation file, read the license for use, select the installation location and, if necessary, other parameters.

Run the application. After that, an automatic scan will take place, as a result of which you will see a list of the detected partitions. Select the section information in which you want to restore, and then configure additional parameters. They can be the type of the file system, the boundary of the scan being carried out, the encoding, the algorithm by which the scan will be carried out. Depending on the selected program, the settings may contain other items.

Start scanning the corresponding section. Depending on its volume, connection method and other characteristics, scanning can take from a couple of minutes to several hours. After the end of the process, the found files and directories will be displayed in the application window.

Determine which files need to be restored. Some programs support the ability to preview, which makes the selection process easier. Select and mark the required files.

To keep the restored information, click on the corresponding button on the program toolbar. Select the location for the files to be saved. Please note that saving is not possible on the same section of the media on which the scan was performed. So choose either a different hard disk partition or a different storage device.

If recovery using one of the applications did not work, try another. Different recovery algorithms work in different ways.

Related Videos

If you accidentally deleted important files or a whole disk partition, then they can be recovered with a 90% probability. Naturally, certain types of files are difficult to recover.

You will need

  • - Easy Recovery.

Instructions

Naturally, you need to use special utilities for successful file recovery. Download Easy Recovery. Be sure to choose a relatively new version of this utility, because the number of recovered files can be colossal in comparison with outdated releases. Make sure that the selected version is compatible with your operating system. Install Easy Recovery and launch the program.

Open the Data Recovery menu. If you just deleted important files then select the Deleted Recovery menu. Wait for the new menu to open. Select the hard disk partition where the deleted files... Specify a category of file types to speed up the search process. Activate the Complete Scan item. This will perform a deep scan of the hard drive.

Click Next and wait while the program searches for deleted files. This process can take a long time. It all depends on the speed of your computer and the size of the specified partition of the hard drive.

After scanning is complete, a new menu will open. Wait a while for the process of listing the detected files to be completed. Now select those that need to be restored. To do this, check the box next to the corresponding folder in the left window of the program or next to a specific file in the right window. When it comes to, then usually you can use the preview function.

Click the Next button. Specify the drive where you want to save the recovered files, and a folder on it. Remember that you cannot specify the disk partition from which you are recovering files... Click the Next button and wait until the process of restoring the selected data is completed.

Related Videos

Sources:

  • recovery of lost files

Many deleted files are possible not only from hard drives, but also from external storage devices, such as flash cards. To do this, you must perform the correct sequence of actions.

You will need

  • Easy Recovery program.

Instructions

If you accidentally delete important files from your USB drive, never write new information to it. Safely remove the device and set it aside for a while. Download and install the Ontrack Easy Recovery software. It is better to use the sixth version of the utility.

Connect the USB stick to your computer and run the program. Open the Data Recovery menu and select Deleted Recovery. After a new menu appears, select the desired flash card on the left side of it. Check the box next to Complete Scan. Complete the File Filter field. Select the suggested templates or enter the names of the file types yourself.

Click the Next button. After that, the process of scanning the specified flash card will start. It will take a little time, because flash drives have a relatively small amount of memory. After the scan is complete, a list of found files will be generated. Check the boxes next to the ones you want to restore.

Please be aware that some files can be recovered with errors. This is because some clusters may have been overwritten after deleting files. Return to the main menu of Easy Recovery and select "File Repair". The utility used successfully works only with office documents and archives. Select the files you want to restore the integrity of and click the "Next" button. Check the quality of the recovered data.

Related Videos

If you accidentally delete files from your hard disk or other drives, you should immediately start recovering them. To do this, you can use both expensive utilities and their free counterparts.

You will need

  • Recuva.

Instructions

Go to the "Security" tab and click the "Change" button. In the window that appears, right-click on the "Add" button. The system will prompt you to select a user or user group. Then click the "Advanced" button, and in the new user selection window - the "Search" button. In such an intricate way, we finally got to the list of all users of this computer.

Find your user among the search results, select him and click "OK". Agree again and return to the Security window. Now your name will be among the users. Check the list of permissions below and click "OK".

Such difficulties with user access rights arise due to the fine-tuning of the user policy in the Windows 7 operating system. Such a policy allows you to protect personal files user from deletion or modification by an unauthorized person. In general, we can say that this operation, when performed sequentially, will not take much time and effort.

Data that has been deleted from a flash drive in any way can be recovered in most cases. To do this, you just need to follow a number of certain rules and use special recovery software.

Instructions

Having discovered the loss of data, or by accidentally deleting the necessary files, first of all, protect this removable disk from further data recording. Excluding writing is necessary in order to prevent irrecoverable loss of data, since the standard deletion procedure does not imply the physical disappearance of files, but only serves to prepare the file system for the next write. If you decide to recover lost data, connect it to your computer so that it is recognized as a removable disk and do nothing with it.

Install any data recovery application. If the importance of the deleted information is not great and you have met all the conditions to increase the likelihood of recovery - feel free to use free software solutions. One such utility is Easy Drive Data Recovery, designed specifically for flash cards and using special algorithms to recover data from this kind of media. You can download Easy Drive Data Recovery here http: //www.munsoft.ru/EasyDriveDataRecovery/articles/flash_card_data_rec ...

Run the program and start the procedure for recovering lost data. To do this, select the area to be analyzed by the program (in this case, a removable disk). After the utility scans the USB flash drive, a list of files available for recovery and brief information about each of them will open in a special window. The most important point of information in this case will be the likelihood of file recovery. Make sure that the file you need has this probability high, then click the "Recover" button. After that, select the directory where it should be saved. Please note that you can restore the file only to another disk, that is, the file must be saved to a directory located on the hard disk, or to another.

Related Videos

Tip 8: How to recover files from a formatted flash drive

There are times when we accidentally delete the necessary information or format the wrong disk or flash drive. There are ways to recover the data you need that you can use.

You will need

  • - a computer with Internet access;
  • - program for data recovery.

Instructions

Download the installation file for Recover My Files 4.9.2.1240. The program has the function of recovering data from, from local disks after formatting. Run the installation file. Follow all the instructions of the program, then run the program to restore files removed from storage media. There will be two options available in the program window: “Restore files"And" Recover Disk ".

Select the disk recovery option and click Next. The next window will display a list of disks on your computer, both local and removable. Select the required disk, for example a memory card, click the "Next" button. In the next window, you can choose either automatic data recovery from flash drives, or recovery of files of a certain format. If, for example, there were only documents in the .doc format, and they are the ones you want to restore, select the second option. If there are many files and they are all in different formats, select the first option. Then click "Start". Or "Next" and select the file type you want.

Wait for the scanning process to complete. At the top of the program window, a status bar is displayed, to the right of it is the "Cancel" button. Select the disk recovery option and click Next. The next window will display a list of disks on your computer, both local and removable. Select the required drive, for example, click the "Next" button. In the next window, you can choose either to automatically recover data from a memory card, or to recover files of a certain format. If, for example, there were only documents in .doc format, and they are the ones you want to recover, select the second option. If there are many files and they are all in different formats, select the first option. Then click "Start". Or "Next" and select the file type you want. After scanning is complete, a list of files available for recovery will appear on the screen. Select the ones you need and click the "Restore" button on the toolbar.

Tip 9: How to recover data on a USB flash drive after formatting

It often happens that data from flash drives is accidentally deleted due to carelessness. But there are programs that can pull out deleted files even after formatting the media.

You will need

  • - Computer;
  • - Hetman Uneraser program.

Instructions

Download the Hetman Uneraser program to your computer, for this follow the link http://hetmanrecovery.com/ru/download.htm... Wait until the download is complete, install the program to recover information from media after formatting. The program is capable of recovering data in the following formats: digital photo (JPEG, CR2, RAW), documents created in Microsoft Office programs, archives, and audio files.

Run the program, run the file recovery wizard. A window will appear, in it you need to select the disk from which you want to recover information after deletion. The program will carry out the function of "deep analysis" and scan the disk to determine the types of files deleted during the formatting process from FAT or NTFS partitions. The program supports data recovery from disks with FAT, NTFS partitions, as well as from compressed NTFS partitions. Select the drive, click the "Next" button.

Review the list of files and folders available for recovery. To recover files after formatting, select and click “Recover”. Use filtering to see only deleted files, you can also search by recovered files, by size, type, name, date of the file.

In the recovery wizard, select the file search criteria and click Next. In the next window, specify the required file types for recovery. You can select the "All Files" option, or the "Filter by Mask" option (if you know the file name), or select the file types to recover (for example, databases and images).

note

Not sure how to recover a USB flash drive, hard drive or memory card? Are you looking for a way to recover deleted data from a FAT or NTFS logical partition? Do you want to recover files completely preserving the logical structure of the disk? Need to completely recover a disk partition after formatting?

Useful advice

R-Studio is perfect for recovering data from a flash disk - DOWNLOAD. After starting the program, we immediately see a list of your storage devices. Recovering data from a flash drive. And finally, here are the deleted files that the program was able to find on the USB flash drive. The found data will be presented in folders by file type, you just have to select the desired file, deleted during formatting, or restore all at once.

Surely everyone at least once faced with the inaccessibility of files on a USB flash drive. There may be many reasons for this (incorrect extraction, physical damage, accidentally removed files), but there is still hope to restore the cherished data.

You will need

  • One or several programs: Recovery Toolbox for Flash, SuperCopy, Recuva, PC Inspector File Recovery, Undelete Plus, Unstoppable Copier.

Instructions

First, don't make unnecessary movements. The less manipulations with files you have done after damage or, the easier it will be and the more likely it is. Do not format, and if formatted, then do not write new data to it. Recovering deleted data is easier than recovering deleted data after formatting.

If you did not delete the data, but access to it is denied, and a system warning about an error appears, then try restarting your computer (sometimes it even helps). When that doesn't work, remove it correctly and reinsert it.

If this does not help, then it is necessary to carry out a "check of the removable disk". To do this, in the "My Computer" window, right-click on the icon and select "Properties". In the window that appears, select the "Service" tab and click on "Check". Check the boxes "Automatically fix system errors", "Check and repair bad sectors" and run the scan.

If access to the files is still closed, then you need to resort to the help of specialized programs. Also, such programs can (not always) recover deleted manually and after formatting files... Most of these programs are easy to use and intuitive. The likelihood of recovering lost files depends on many factors, but the chance is decent. One drawback is that the vast majority of such software products are paid or shareware, but almost all provide an opportunity to try them out on several files.

Download and use one of the following programs:
- Recovery Toolbox for Flash;
- SuperCopy (free);
- Recuva;
- PC Inspector File Recovery (free);
- Undelete Plus;
- Unstoppable Copier.

There is a chance that where one utility fails, another will help. If lost or damaged data was dear to you, then do not be lazy and try several recovery programs.

note

How to recover damaged files? Need a program to recover corrupted files? Looking for a way to recover corrupted files? Your files won't open or open with an error after a virus attack, program crash, computer crash or unsuccessful data recovery? Not sure how to fix an internal file structure error?

Useful advice

DiskInternals Uneraser - Recovers any deleted files, including documents, photos, mp3 and zip files. DiskInternals Flash Recovery - Recovers all damaged and deleted photos from memory cards and hard drives. The likelihood of its performance in the event of minor damage remains quite high. In addition, in the latest versions of Skopin FileCopier, it became possible to inscribe data from a special image file created by the FileCOMPILER program from ...

Sources:

  • damaged flash drive

Tip 11: How to recover data from a formatted flash drive

Instructions

For formatted data, you need one of the specialized applications. Examples include R.saver, Recuva, UFS Explorer, etc. Connect to your computer and launch one of the selected data recovery applications.

After starting, wait until the end of the automatic scanning process. After that, the program interface will display a list of found partitions and devices connected to the computer. Select the USB flash drive from which you want to recover information.

Configure information recovery options if desired. You can specify the type of file system, encoding, scan area of ​​the flash drive memory for data recovery, algorithm. You can also leave all settings as default.

After that, start scanning the selected device. The duration of the scan is influenced by such characteristics as the baud rate of the interface through which the device is connected and the size of the flash drive itself. The larger it is, the more time it takes. The result of scanning will be the display in the program interface of the found folders and files that have been deleted from the device.

Carefully study the information provided and determine which data needs to be recovered. Select the ones you want to restore. After that, on the program toolbar, click the button responsible for starting the recovery process. In the window that appears, specify the location on the computer hard disk where the files to be restored will be written. You will not be able to select to save. Confirm the start of the restore procedure and wait until all the necessary files are restored.

If using the application did not bring the expected results, try another data recovery program.

Related Videos

Sources:

  • how to return formatted data to a USB flash drive

Due to failures that can be triggered by various reasons, information on flash cards can be lost. Do not immediately give up on it. There are several ways to recover lost data.

Instructions

Find the File Explorer app. Select your USB flash drive from the list of devices. Click on it with the right mouse button. In the context menu that appears, select the "Format" item. Choose a quick formatting method, then click OK.

Install on your personal computer a program that will help you recover flash card data. Download Easy Recovery Professional from the Internet. It is available. You can download it on the official developer's website or on any other portal.

After the program is installed, run it. Go to the "Data Recovery" section. Find Format Recovery. After you activate it, a system scan will automatically start. Then a warning will appear stating that the files to be restored should be saved to a different drive. Agree with this statement by clicking OK.

Select the USB flash drive in the list of media in the program interface. Then click the Next button. A scan of the flash card will start, as a result of which all data that has been recently deleted or erased for some reason will be found. To recover files from a flash drive, select them from the provided list. You can restore all of them, although it is better to restore selectively.

Click "Next". Then select a folder on your personal computer where you would like to save the recovered files. Then click the Next button. The file recovery process will begin. When it finishes, all the recovered information will be saved in the folder you specified.

Related Videos

Sources:

  • data recovery from flash

Tip 13: How to recover files after formatting a flash drive

If you accidentally formatted an external USB drive, then try to return important for you files... For such cases, special programs have been developed that perform the process of searching for deleted data.

You will need

  • - Easy Recovery.

Instructions

Please note that you should never write any information to this USB stick. The more intensively you use after formatting, the less chance you have to restore the necessary files... Download and install the Easy Recovery app. For this purpose, use the system partition of the hard disk.

Connect a formatted USB drive to the appropriate port on your computer or. Run the Easy Recovery program. In the quick launch menu, select Data Recovery. In the window that opens, select the Format Recovery menu. In the left window of the program, select the required USB drive. Be sure to specify the previous file system type for this one. Click the Next button.

Wait for a while while the utility collects information about the files previously stored on this USB drive. This process can take a long time. Much depends on the performance of your computer and the speed of the flash drive used. Wait for the new menu to appear.

Now tick off those files to be restored. If you want to return all available information, then simply select the topmost gurney in the left menu. Click the Next button. Specify the hard disk partition and folder where the deleted files will be recovered. files... Click the Next button again and wait until the recovery process is complete.

If you need to recover documents of a certain type, select the File Repair menu in the quick launch bar. Select the type of document from the menu that appears. These can be text documents, tables, and created using the programs included in the Microsoft Office suite. Follow a similar algorithm to find and recover lost data.

note

Data recovery after hard disk formatting. In case of data loss, many people want to perform an hdd recovery or flash drive recovery. For information on how to convert the file system of a USB flash drive from FAT to NTFS, read the article How to format a USB flash drive to NTFS. Later I will write an article on how to recover deleted files using a powerful free program. so as not to miss.

Useful advice

R-Studio is perfect for recovering data from a flash disk - DOWNLOAD. After starting the program, we immediately see a list of your storage devices. Select your USB flash drive and click on the "scan" button to start searching for lost files. Recovering data from a flash drive. And finally, here are the deleted files that the program was able to find on the USB flash drive. The found data will be presented in folders by file type, you just have to select the desired file, deleted during formatting or ...

Now in the next window, check the box for your flash drive, and if the hard drive partitions are ticked off, uncheck them. This localizes the program to work exclusively on your flash drive. Then proceed further. If you are looking for a specific file, then in the line "File criterion" enter its name, you can approximate. You can also enter the file extension. If you need to restore information in general, then leave the "Search Criteria" line blank. Click Next.

After that, the file recovery process will begin. At the end of it, a window will appear with a list of files that can be restored. Select those that you need, then click "Restore" at the bottom of the window. Then select the item "Restore to the specified folder". Specify a location to restore. It can be directly a USB flash drive or any other folder on the hard drive of the computer. Then click OK and the files will be restored.

Specify the formatted partition in the next EasyRecovery Professional dialog box and specify the file system you used in the drop-down directory. Save the changes you made by clicking the "Next" button and wait until the search for the required files is completed again.

Select the files to be restored in the list of the next program dialog box and confirm your choice by clicking the "Next" button. Use the "Browse" button to specify the location to save the recovered files and confirm the selected action by clicking the "Next" button. Wait for the restoration process to complete and click the "Finish" button in the final window of the application. Save the changes made by clicking the "Yes" button in the system request window and exit the program. Make sure all the information you want is displayed correctly.

Recuva will help out in trouble

The Recuva utility will help you to cope with the problem of recovering deleted files. Small, about 4 MB in size, it has high performance. Plus, it's pretty easy to use. Therefore, it will not hurt anyone to install it on a computer.

You can find the program on the Internet, on sites with software. Download the application and install it on your computer. To do this, run the installation file. In the window that opens, select the interface language - Russian. Click the Next button. After that, the interface will be updated to Russian, and you can continue with the installation. To do this, click the "Next" button and in the new window that opens, check the box for the main settings of the program. You can create a shortcut on the desktop, create shortcuts in the Start menu, add search for deleted files in the Explorer menu, add search for deleted files in the Trash menu, and automatically check for program updates. By default, the program has all these parameters set, but you can change them, although it is best to leave everything as it is. In this case, searching for deleted files will be most effective. After all, you can use this program to recover files deleted from your computer.

In the additional settings menu, you can set a restriction on the use of the program: only for yourself or for everyone who has access to this computer.

After that, click "Next" and specify the location to save the program. The program will be automatically downloaded to the hard drive in the folder with the program files, but if you wish, you can change its location using the "Browse" button. After that, follow the prompts of the program, click the "Install" button and wait until a new window appears - "Completion of the installation wizard." In it, check (or uncheck) the "Launch Recuva" and "Program Information" items and click the "Finish" button. Now you can use the program and recover deleted files.

Recuva searches for files

To recover information deleted from a flash drive, run the Recuva program and click the "Next" button. After that, in a new window, mark the type of files that you need to find on removable media: all files, pictures, music, documents, videos, compressed, e-mail.

Then, in the next window, specify the location of the deleted files, in this case you will need to select the "In the specified location" option and specify a specific removable media (flash drive). After that, click the "Next" button and in the next window, check the box next to "Enable in-depth analysis" and click the "Start" button to start the process of searching for deleted information.

After that, the program will analyze and identify the files that it was able to find. Select the files you need (you can select all documents at the same time) and click the "Recover" button in the lower right corner. Then specify the hard drive where you want to save the recovered information. Wait until the end of the process and view the result. Rest assured that most of the information will be recovered.

Please note: Saving files to the same drive that was searched can reduce successful file recovery. Therefore, you need to save the found information to another hard drive or removable media.

Information can always be restored

In the modern world, information is a part of every person's life. Now it is no longer necessary to store archives in large rooms (like a library) - they were replaced by a computer, as well as electronic media, on which most of the information is now stored. Today the word "information" means any document stored electronically.

But if earlier all the accumulated information could, for example, burn out, now information can be lost even faster - due to a virus attack, a computer failure or careless formatting of hard drives. However, if after a fire it will be already problematic to recover data, then it is much easier to solve the problem of deleting electronic files.

Wherever this information is stored - on the hard drive of a computer, on a flash drive or on a phone memory card - you can always recover lost data.

Data recovery methods

So how do you recover data from a USB flash drive? First of all, it is not necessary - after that it will be more difficult to recover the data. If the flash drive has been formatted, do not write any new data. This will also complicate the process of recovering information.

Usually, when trying to connect a USB flash drive to a computer, system errors occur when reading the device. If you go to the properties of the removable disk through the shortcut "My Computer", you will notice that the capacity of the flash drive and the file system are determined incorrectly (usually it shows that 0 bytes are occupied, and 0 bytes are also free).

To restore information on a USB flash drive, first of all, you need to restart your computer. It won't get any worse, but sometimes this method can help. If the flash drive is still not readable, then you need to disconnect the USB flash drive through "safe removal of the device", and then connect it again (for correct removal, you need to click on the flash drive shortcut in the tray next to the clock and select the "Eject device" item) ...

If this does not help, you need to check the removable media. To do this, you need to open "My Computer", call the context menu on the flash drive icon, and select the "Properties" item. Then, in the window that appears, you need to select the "Service" tab, and click the "Check" button. In a new window that opens, both checkboxes should be selected.

If all the same does not help, then there are only two options. The first is the use of special data recovery software. But each program works differently and sometimes it will be able to recover data and sometimes it won't. You need to try several programs to recover information.

And finally, the last way is to take the flash drive to the service center, where the specialists will do their job and restore all the lost information. And so that this does not happen again, you need to make backups more often to your working computer, and use the USB flash drive only as a temporary removable media (for which it was created).

It is an easy-to-use yet powerful utility for recovering lost data.

To restore, you will need to select a medium from the list on the left side of the program window, and then click the QuickScan button.

The media structure appears in the navigator on the right. Deleted files will be indicated with white icons.

Then it is enough to select the necessary documents and click the Restore button. In the dialog box, specify the directory for saving the recovered files and approve the recovery.

When the process is complete, the recovered files will be ready for use.

Advantages:

Ability to work with a large number of media (up to a hard drive);

Easy to learn and friendly interface;

Free version available.

Flaws:

Lack of Russian localization;

The free version has a limit on the size of recoverable files.

Recuva

The freeware utility not only works with flash media, but also provides data recovery from a disk.

After starting, the program prompts you to select the medium, then the file type.

The "Enable in-depth analysis" item will increase the chances of finding lost data.

On the left side of the program window there will be a list of files found on the media. It is enough to mark the checkbox next to the required ones and click "Restore".

Then you will need to specify the directory for saving the data and approve the process.

Once completed, the files will be ready for use.

Advantages:

Completely free distribution;

A wide range of functions;

Ability to completely delete files.

Flaws:

In some cases, it does not restore the contents of the file.

Easy Recovery

The intuitive interface of the program allows you to quickly recover lost files. To recover lost data, just select the type of media.

Select a specific media from the resulting list.

Then you need to choose whether the data has been deleted or formatted. After scanning, the file structure of the media will appear on the left side of the window.

Folders highlighted in blue - existing, in green - erased or unmarked.

To restore, you will need to select the necessary files and in the drop-down menu by right-clicking, select the "Save As" item.

After specifying the location for saving, the files will be available for use.

Advantages:

High recovery rate;

Intuitive interface;

Ability to work with many types of media.

Flaws:

The high cost of the paid version;

The trial version allows you to extract only one file at a time.

Auslogic File Recovery

The program allows you to effectively recover lost data from both flash drives and hard drives.

On the left side of the window there is a navigator in which you will need to select the media for the recovery procedure. On the right, options for action will be presented.

You can recover a specific file type, or you can scan for all types.

Upon completion of the search, there will be a list of files in the central part of the window. It is enough to select those of interest and click "Recover selected".

After saving to the specified directory, you can freely work with the files.

Advantages:

The exact search mode saves time;

Ability to work in simple and complex modes of operation, depending on the level of training of the user;

Complete removal of confidential files.

Flaws:

Trial version for 15 days;

Unoptimized interface.

GetDataBack

Detailed instructions accompanying each step of data recovery will help even users with a minimal amount of knowledge to cope with the program.

In the first step, you will need to select the media. On the left side of the screen there will be a list of available ones. In the second step, you will need to select the type of file system.

The standard file system for flash drives is FAT32, but options are also possible.

In the third step, the program window will display an expanded navigator for the scanned media. All files will be marked according to the legend at the bottom of the window.

Now all that remains is to copy the necessary ones.

Recovering a formatted flash drive: how to get back deleted files?

SIMILAR ARTICLES