Instructions for installing the firmware on the smartphone Huawei P9 Standart, the firmware of the official update, the unlocking of the Huawei P9 loader, the firmware of the Custom Recovery TWRP Recovery, installation of custom firmware and receiving the root of the superuser's rights.
Installation of official stock firmware on Huawei P9 Standart
In general, there are two official ways to flash smartphone. The first and easiest is the OTA update, the firmware arrives on the phone through the air, the smart downloads it and installs it. Everything is fine, but such updates do not always arrive.
The second method, the Huawei P9 Standart firmware through the Hisuite program.
Thus, the firmware can be installed "on purely", that is, with the formatting of internal memory, as a result of which we get a varia-clean OS. This method refers to setting three buttons.
1. Update OTA:
When the next firmware is released, you receive a message in the status bar and offered to be updated. Behind the frequent update, it turns out in the form of a 40-80 MB archive (only updated files), but sometimes it turns out in the form of a full firmware. That so that ADAC, agree and go to the reboot. The recovery menu appears and the process went. As a result, we get an updated OS, with the preservation of former configuration, software, files, and other things.
2. Huawei P9 Standart Firmware through Hisuite Program
Unzipped. There will be a Update.app file in the DLOAD folder. You copy this folder and throw either SD or into the internal memory of the phone. Disconnect the phone from the computer. In the phone we go along the path: settings - update-menu-local update. Agree. Further, everything is as in OTA.
On the 6m Android, this item from the update menu was removed, on this to update locally on 6, you need to throw the DLOAD folder to the root of the SD card and then type in the dialer * # * # 2846579 # * # * Then 4 Software Upgrade SDGRADE. The result is the same.
4. Installing the firmware using the 3-button buttons
Download the archive with the firmware from the previous point, we unimpose the DLOAD folder there will be a Update.app file. You copy this folder to SD or into the internal memory of the phone. Disconnect the phone from the computer. This method implies full formatting of internal memory. Previously, you need to save (backup application) The necessary files from there otherwise lose them. Turn off the phone. Closed all three buttons at the same time: (ON) and (volume-) and (volume +) and wait until the Huawei screensaver appears, then the phone will appear again after it swings and the firmware process will go, the indication in%, as appeared immediately release and wait for the end. In the end, the pure original OS.
Unlock loader Huawei P9 Standart
we ship the phone to the fastbut and connect it to the computer (turn off the phone, clamp the volume key minus and connect the phone to the computer)
Start the ADB Run program on your computer, after starting the program, the main menu appears in which you need to select item 7 by pressing the corresponding key on the computer keyboard and confirm this action key ENTER 
in the menu that appears, select 1 item
in the next window of the program, you write the FastBoot OEM Unlock ****************** in which the place of the asterisks you need to put your diquses of the code that you got in advance
After the word unlock, there is a space and then talker
(Example FastBoot Oem Unlock 1234567891234567)
after entering the command confirm all this case, the Enter key
That's all, now your Huawei P9 with unlocked loader.
Installing custom TWRP Recovery on Huawei P9 Standart
First
Download Castoma Recovery TWRP Recovery for Huawei P9 Standart and copy it to the AdB Run folder along the ADB / IMG / Recovery path.
In manual Translate the phone to the bootloader mode (fastboot / fastboot). This is done like this, connect the USB cord to the phone, clamp on the phone and hold the volume - and power. After 5 seconds you will enter the bootloader mode. Or turn off the phone, clamp the volume minus and connect the cord from the computer and after 3 seconds you are in the bootloader.
Next, run the ADB program itself and press the number 5 enter then the number 3 Enter. Retires the window with your recovery file. Close window and follow the instructions of the program. All of you launched Castomal Recovery TWRP Recovery.
Second
In the ADB folder, find the Progbin folder into it throw the file you need a custom recovery TWRP Recovery.
On the phone go on the setup / for developers / USB / enable debugging.
Then press the ADB program icon on the computer. The menu will open, you press the number 7 in it. Then enter further 1 and enter.
In the field that opens, the following commands fit:
aDB Reboot-Bootloader
fastBoot Flash Recovery (xxxxxxxxxxxxxxxxx)
(where xxxxxxxxxxxxx is the name of the file of the custom recovery that you want to use)
fastBoot Reboot
After entering each command, click Enter.
If the first command does not work, then when the cord is connected to the computer, heal the volume - and power and hold (5-7 seconds) until the bootloader mode does not enter. And then you can skip the first command.
The bootloader must be unlocked
Installation of custom firmware on Huawei P9 Standart
To install a custom firmware on the Huawei P9 Standart smartphone, you must be unlocked by the loader and the second - installed modified recovery TWRP Recovery
Dear members of the forum, this article contains information about the mobile device. Here you can download the latest version of Android firmware on Huawei P9 Lite Dual Simand also be able to find out how to get root rights.
Read more about root rights you can. Instructions for getting below.
In which cases you need to update the firmware
- I want to install a new firmware to expand the capabilities of a tablet or smartphone;
- Need restoration after unsuccessful firmware
- The device is constantly rebooted without a cause;
- The device does not turn on.
What firmware we have
In order to download Android 5.1 Lollipop firmware, 6.0 Marshmallow., 7.0 Nougat., Android 8.0 O. At Huawei P9 Lite Dual Sim, read the article completely - it is very important. By installing a new available version of Android, you will be surprised by the opportunities that have appeared. And you can also find the official version of the miui firmware of different versions and custom original firmware.
Leaving feedback through the comment form, you help others learn about the pros and cons of Huawei P9 Lite Dual SIM and make a purchase decision.
Availability of firmware: in stock.
Download firmware
Leaving a review through the comment system, specify a real email if you have problems with installing the firmware. Please take into account that we provide free consultations, so we can respond with the delay. In addition to the administration, you can answer and help ordinary users, everything is like on the forum.
Instructions for installing firmware is based on the links below. Downloading the firmware for Huawei P9 Lite Dual SIM is available via torrent with instructions.
Firmware Installation Instructions
To download, select the firmware you need and click on the link.
For installation:
- Download a file with firmware and a special program.
- Run the program on your computer
- Select the desired firmware version
- Follow the instructions from the file archive
Video on the firmware Huawei P9 Lite Dual SIM
Smartphone Huawei P9 Lite. It is estimated in 0 points on the productivity scale and works under the control of Android 6.0. This smartphone - needs an additional evaluation .. Find out how to get root and make a reset settings. By the way, we can download firmware and instructions on your Huaway. On board has - Hisilicon KIRIN 650.
Characteristics
- Type: Smartphone
- Operating system: Android 6.0
- Case type: Classic
- control: Screen buttons
- SIM Type: Nano SIM
- Number of SIM-Cards: 2
- Mode of operation of several SIM cards: alternate
- Weight: 147 g
- Sizes (shXVXT): 72.6x146.8x7.5 mm
- Screen Type: Color IPS, 16.78 million colors, Nonsor
- Touch Screen Type: Multitach, Capacitive
- Diagonal: 5.2 inches.
- Image Size: 1920x1080
- The number of pixels per inch (PPI): 424
- Automatic screen rotation: yes
- Camera: 13 million pixes., LED N'sp
- Camera Functions: Autofocus
- Video recording: yes
- Front camera: yes, 8 million pixels.
- Audio: NMP3, AAC, WAV
- Headphone jack: 3.5 mm
- Standard: GSM 900/1800/1900, 3G, 4G LTE, LTE-A Cat. four
- Interfaces: NWI-FI 802.11n, Wi-Fi Direct, Bluetooth 4.0, USB, NFC
- Satellite navigation: GPS / GLONASS
- A-GPS System: yes
- Processor: Hisilicon Kirin 650
- Number of processor cores: 8
- Video processor: Mali-T830 MP2
- Volume of built-in NPamyti: 16 GB
- RAM size: 2 GB
- Memory card slot: yes, up to 128 GB (combined with a SIM card slot)
- Battery capacity: 3000 mA / h
- Charging Connector Type: Micro-USB
- Loud connection (built-in Ndamik): yes Management: voice dialing, voice control
- Flight Mode: Yes
- Sensors: Lights, Nizable, Compass, Fingerprint Read
- Flashlight: Yes
- Complete set: smartphone, charger, nusb cable, 3.5mm headphones
- Features: Hisilicon KIRIN650 processor: 4 cores 2.0GHz + 4 kernels 1.7GHz, 64-bit
- Nanouncement date: 2016-04-06
- Case material: plastic
- Max. Video Resolution: 1920x1080
- Max. Frame frequency NVideo: 60 frames / s
- LTE range support: FDD: Band 1, 3, 7, 8, 20
»
Firmware for Huawei P9 Lite
Official firmware Android 6.0 [Stock ROM file] -
Custom firmware Huawei -
If a custom or official firmware on Huavay has not yet been added here, then create a topic on the forum, in the section, our experts will quickly and free help. With backup and manuals. Just do not forget to write and reviews your smartphone - it is extremely important. This page will also appear firmware on Huawei P9 Lite. Please note that this model Huaveway requires an individual ROM file, so you should not try firmware files from other devices.
What are the Castom Firmware (Firmware)?
- CM - Cyanogenmod.
- Lineageos.
- Paranoid Android
- Omnirom
- Temasek's.
- AICP (Android Ice Cold Project)
- RR (Resurrection Remix)
- MK (Mokee)
- Flymeos.
- Bliss.
- crdroid
- Illusion Roms.
- Pacman ROM.
Problems and disadvantages of the smartphone from Huawei and how to fix them?
- If the P9 Lite does not turn on, for example, you see the white screen, hanging on the screensaver or only flashes the alert indicator (perhaps after charging).
- If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
- Not charging (usually, problems with iron)
- Does not see the SIM card (SIM)
- Camera does not work (for greater extent, hardware problems)
- Sensor does not work (depends on the situation)
Hard Reset for Huawei P9 Lite
Instructions, how to make a Hard Reset on the Huawei P9 Lite (Reset Settings). We recommend to get acquainted with the visual guide, which is called on Android. . 
Codes for resetting settings (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off the device-\u003e Go to Recovery
- "WIPE DATA / FACTORY RESET"
- "Yes - Delete All User Data" -\u003e "Reboot System"
How to go to Recovery?
- hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
- the menu will appear with Android. Everything, you in Recovery!
Reset settings on Huawei P9 Lite can be done in a completely simple way:
- Settings-\u003e Recovery and Reset
- Reset settings (at the bottom)
How to reset the graphic key
How to reset the graphic key if you forgot it, and now you cannot unlock your Huawei smartphone. On the P9 Lite model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.
- Reset graph. Locks -
- Password reset -
