LG cell phone fell into water or what to do if water gets into the phone
Recessed LG Phone. What to do if you drowned or just got wet.
Water can't hurt telephone . You tell me, what am I doing then on your site in this section? I've got it broken. Because it is not water that brings out of standing, but water in combination with a battery. As a result, electrochemical corrosion of the board occurs. In other words, the board of your gadget and all its elements begin to rust, rot, i.e. disintegrate, turn into dust.
Why don't LG cell phone manufacturers protect them from corrosion?
Well, why did you decide so? Protect and how. They cover the board with a protective layer of varnish, which is designed to protect your device.
And why, then, do they fail if its board is covered with a protective layer of varnish? Yes, because this varnish should not save you from swimming in the pool. Only a diving suit will save you from this. Its task is to create a protective barrier and prevent the formation of corrosion on the board if there is suddenly strong humidity. For example, a bathroom or a bath. And again, this barrier is not long in time, which means that you should not test it for strength while sitting in a steam room with friends.
The first thing to do if your phone gets water is to disconnect the battery. Then immediately take it to the service center. If this is not possible, then you need to try to somehow dry the device with a hairdryer, put it on the battery for the night, put it in a warm place for a couple of days, etc. Perhaps after that your favorites will work without problems. Although, as practice shows, the lion's share of phones that come in for repair have previously been exposed to water (rusty spots inside, oxidation, raids, etc.) and who knows for what really reason your gadget failed this time. In any case, it can be argued that it was the water that once got there that played a significant role.
In all cases of moisture ingress under the housingdrying and cleaning of the device is necessary. Otherwise, there may be a partial or complete inoperability of the device. I emphasize that it is possible, but not required. But the oxidation process can take quite a long time, and how will it behave mobile phone next day or in a month it is impossible to say. The more time has passed since the ingress of moisture, the less likely it is to restore full performance in the event of a breakdown.
If, after getting wet, you quickly disconnected the battery and brought it to us, then most likely you will save your pet and save your repair budget.
What do we do when your phone is mocked?
Phone disassembly;
- cleaning in an ultrasonic bath;
- removal of traces of moisture;
- cleaning the mobile phone board from corrosion;
- complete drying of the apparatus;
- phone testing.
Service market by phone or ask a question in any form of feedback.
Phone model: ke990
Question:
the screen is not working ... Everything is visible there is no damage .. But it does not react .. - Denis
Answer:
Bring it in for a free diagnosis. Most likely the sensor is faulty.
The panel is cracked and you can't see what's on the screen...
Phone model: LG KP110
Question:
The panel is cracked and you can't see what's on the screen - Zenfira
Answer:
Given the low cost of this model (within 1000 rubles in the store), the repair of such devices is not advisable. They are usually disposable and spare parts are not supplied for them.
the cost of repairing the display and the charging socket ...
Phone model: KP 265
Question:
the cost of repairing the display and the charging socket -
Answer:
800 rubles
How much does firmware cost?
Phone model: KC550
Question:
How much does the firmware cost? - Ivan
Answer:
04.08.09a problem with touch control. many commands are answered incorrectly or in general ...
Phone model: lg ks-660
Question:
touch control problem. many commands do not answer correctly or do not answer at all. For example, you press the number 2 and it turns out 5 and so on. Tell me, is there enough firmware or a screen to change? - Dmitry
Answer:
Try to calibrate the sensor through the menu. If this does not help, then only replacing the sensor will correct the situation.
Clamshell phone. When you open it, the picture is distorted, then the screen goes blank, but if ...
Phone model: LG KF 300
Clamshell phone. When you open it, the picture is distorted, then the screen goes blank, but if you open it a little, everything works fine - Anna
Most likely the cable is faulty. Bring it in and we'll replace it.
22.07.09how to format phone flash drive?
Phone model: ke 800
how to format phone flash drive? - Gulnara
Answer: There are several ways, as it is convenient for someone.
21.07.09sunbathed with the phone, it overheated now the phone is working, but touch screen not...
Phone model: KR 500
sunbathing with the phone, it overheated now the phone works, but the touch screen is gone how much does it cost to fix? Thank you! - Oleg
Answer: The phone cannot overheat in the sun, bring it for free diagnostics.
30.06.09How much does it cost to replace a touch screen?
Phone model: LG KF700
How much does it cost to replace a touch screen??? - Natalia
Display replacement 2600 rub.
25.06.09Touchpad not working...
Phone model: KE 800
Touchpad not working - Olga
07.12.06The call fails authorization...
Phone model: LG b2000
Question:
If a smartphone, tablet or phone turns off spontaneously, two circumstances are to blame. This is usually either a software failure caused by interference with the system, or a physical malfunction of the device parts.
To solve the problem with the self-shutdown of a mobile device, you must definitely find out its essence. If there is a suspicion that the hardware is faulty, you need to pay attention to the SIM card, battery, buttons, terminals with connectors. The microprocessor could also fail if your Android smartphone or tablet often overheated during operation.
There is a second reason that leads to the independent shutdown of the gadget - this is a malfunction operating system. It could have happened for a number of reasons. This is the wrong getting root-rights, and incorrect firmware, and the presence of viruses, and changing system files, And so on.
The first way is to fix hardware problems.
Perhaps the whole point is that you have been using your smartphone and tablet for a long time or carelessly, and the terminals have oxidized, moved away or collapsed. If you use the device for a long time without prevention, the connection points are broken. You need to check the connectors on the battery and the display.This is especially true for those users who carelessly handle the gadget: drops it, shakes it, picks it up with wet hands, uses it in the rain, knocks on the buttons, and so on. To avoid this problem, uncheck back cover device and remove the battery. All its terminals should be cleaned, and also check the clamping contacts of the smartphone connector.
They also need to be cleaned. But use a small screwdriver for this and, in no case, sandpaper. If you rub the connectors, they will oxidize even more afterwards. And they will also not adhere well to the surface, because grooves will appear.
So, how to properly clean contacts. Take a small screwdriver, wrap a piece of cotton wool around it, soak it in a special liquid for contacts and wipe them. If a cleaner is not available (you can find it at an auto shop), use alcohol. When you clean the contacts, straighten them a little. This will help them connect better to the battery terminals.
The previous steps are applicable for smartphones and phones. If you have a tablet, do not take it apart to remove the battery. In these devices, the battery is connected using a solder joint, and therefore this type of failure can be ruled out. Maybe another problem with the hardware of the tablet, but if you do not have special knowledge, you are unlikely to understand what is wrong. In this case, it is better to check the second method, and if it does not work, then take the device for repair.
The second way is to remove all software errors.
If you have updated software in manual mode, this method should solve the problem with the device turning itself off. It is pointless to try it if the failure in the system was due to incorrect obtaining of root rights. In this case, it is best to install the licensed Android platform.
So, to solve the problem of disabling the gadget, we use full reset cache data.
Turn off your mobile device and open special mode Recovery, used for disaster recovery of the system.
Depending on the devices, you can enter Recovery like this:
- If you have a tablet, use the following combination: power key + Volume - (or Volume +).
- If you have a smartphone / phone, use the previous combination or this: power off key + camera (or exit to the main menu) + Volume - (or Volume +).
The keys used in combination must be held for 10 seconds.
After starting the Android recovery mode, click on " wipe cache partition". This can be done with the highlight navigation key. And to select an item, use select. Now we need the item " reboot system now' to confirm your action. Pressing select will restart the device.
If, after turning on, the problem is not solved, reset the settings by clicking on " wipe data / factory reset ". All user data will be deleted!
If all else fails, take it in for repair.
