IP cameras with P2P protocol can be used for various purposes.

Here are the main ones:

• Security of the apartment, house.
• Control of visits (at the entrance to the office, entrance and other premises).
• Surveillance and wiretapping (if the camera has mini dimensions and the possibility of inconspicuous installation).
• Street video surveillance.
• Work as part of security, alarm and video surveillance systems.

IP Camera 2p2 is able to solve many problems, thanks to its features and potential. The main thing is to choose a good model. Our store is always ready to help you with this, providing a choice of high-quality remote video surveillance devices at competitive prices.

Benefits of IP P2P Cameras

P2P IP video cameras available for purchase in our online store often have the advantages from the list below.

Main advantages:

• High degree of mobility and autonomy.
• Protected body.
• IR illumination for night shooting.
• High quality shooting.
• Motion detector providing security functions.
• Simple installation, which does not require the help of a specialist.
• Various remote controls.
• Lots of positive feedback from buyers.
• Affordable price.
• Clear instructions translated into Russian.

The site has models of 2P IP cameras that combine these and other advantages. You can buy a P2P IP camera at a price of 2000 rubles.

The exact cost depends on:

• video resolutions;
• viewing angle;
• power supply parameters;
• method of connection and signal transmission;
• list of network protocols;
• temperature regime;
• maximum air humidity;
• dimensions and weight of the device.

All this can be learned from the product description on the site, and compared with the current requirements, conditions, tasks. After easy and quick ordering, the courier service will deliver the goods in Moscow in the shortest possible time. The basic package already has everything you need for installation, connection and high-quality video surveillance.

In fact, this technology can be safely called a breakthrough. Previously, in order to watch a picture from a WI-FI camera, we needed to find it on the network, and for this we had to know its IP address. At the same time, this address should be STATIC, that is, never change. Yes, it is possible, but only a dedicated IP address costs a little, but still money, while setting up such equipment was beyond the power of ordinary buyers who faced this issue for the first time.

P2P technology is another matter - everything is very simple here. Each camera has its own individual number, which is usually pasted on the camera. When the camera enters the Internet, it knocks on the manufacturer's server and reports its ID and its IP address at which it is currently located. You download a control program to your phone and enter a unique camera ID number. The program on the server, by the specified ID, finds the camera (if it is online) and tells you that the connection is established. Then you just enter your login and password from the camera and that's all - you are already calmly watching what the camera shoots! Agree very simple and convenient. Minus one - if the manufacturer closes or goes bankrupt - stops the server, then the camera will turn into a small useless piece of plastic.

Types and features of WiFi cameras with p2p

WiFi cameras with p2p have an affordable price and are currently available in several versions:

• Internal cameras. Simple structural and inexpensive devices. They are most often performed in a plastic case, designed for installation in heated rooms;
• street cameras. Differ in the strong and reliable case from metal or special type of plastic. Protected from dust and moisture, can have an anti-vandal design. Most often performed in a domed case.
• Dome p2p cameras are used for all-round surveillance of the territory. The camera allows you to track a moving object very quickly - it will always be in the field of view of the camera

Modern wifi p2p surveillance cameras can be bought in Moscow for installation at sites that are remote from the city and are difficult to reach. Simply connect the camera to the Wi-Fi Internet and you can broadcast the video signal to a cloud server or connect to the device remotely using the same smartphone. Also, you can control additional camera options, namely the rotary mechanism.

Video surveillance without remote access today is money down the drain, of course, all recorded video information will be stored on the hard drive, but access to it will be carried out only at the place where the video recording system is installed, which is not always convenient. Just as practice shows, the ability to view video cameras online opens your eyes to many things happening at a protected facility, for example: what is the staff doing at the moment? How is the work with the client? How is unloading and loading in the warehouse? How is the car washed at the car wash? etc.

The possibilities of remote access today are endless, it remains only to choose a way to connect equipment to the Internet. Here, you guessed it, p2p video surveillance service is the easiest way to get what you want from video cameras or a DVR.

Technology P2P allows the device to get a special permanent name (serial ID number) to communicate with the server when using a regular dynamic ip address.

Advantages of P2P.

1. Ease of setup. There is no need to buy static addresses or ddns and deal with port forwarding, you just need to set the ip address of the p2p camera or DVR to match the subnet of your router (gateway).
2. Work with any platforms. Access to p2p video surveillance is carried out through special mobile applications, cms or vms clients for PC, or simply through an Internet browser.
3. Does not require costs. Static addresses or ddns require an additional monthly fee, while p2p servers live off the manufacturers of video surveillance equipment.

Flaws.

For p2p video surveillance, a good outgoing Internet connection speed is required, since communication with the device does not occur directly, as in the case of a static ip address, but through a server that first receives a request for a specific command, uploads information from your device and only then transfers it through client application.

P2P video surveillance through 3g\4g networks.

P2P video surveillance can be created anywhere within the coverage area of ​​a mobile operator. To do this, you need a 3g \ 4g modem, a router with usb modem support and an external antenna (amplifier) ​​to improve the signal.

In the photo: We created an Internet connection using a Zyxel keenetic omni 2 router, (fail-safe wi-fi router, starts up with half a turn) using the “Megafon 4G modem” (connected via usb extension cable) to which it is connected. The DVR itself is located in the shield, connected to the router via the wan port.

The next step was to set the subnet of the router to the registrar, by default the zyxel router has an internal ip address of 192.168.1.1, which means we assign the registrar, for example, 192.168.1.100.

Thanks to the 4g signal booster, we got 10 Mb\s of outgoing speed, which, in principle, is enough for 14 video cameras.

In a specific example, we connected the DVR by p2p serial number, which allows us to view the device from any mobile platform and Internet browser. The downside is that the download of recorded material is extremely slow, so for large p2p systems it is relevant only for online viewing from mobile devices.

Low speed, but static.

In the following example, our device has a weak internet of 4mb\s, but receives a static ip address. We gave the device a white address and forwarded two ports on the router (for security purposes, the http port and the last ip value are hidden). Thanks to statics, we can access the web interface of the registrar without any problems, even at such a low speed, the cameras online work with a slight out of sync.

As we said earlier, a static address always outperforms p2p, at equal speeds, since here we are knocking directly on the web face of our device. Having a static address, working with the device is possible directly through an Internet browser, for example, if you enter its ip and port 10.12.50.77:8888 or by setting up a special sms client on your computer.

According to statics, 11 video cameras loaded without problems in cms, it is possible to view the archive and download it.

Through the p2p application, the maximum that was possible was to view 4 cameras without braking, viewing the video archive is difficult and works extremely unstable.

When opening all video cameras with strong braking, 6 streams opened, viewing is unrealistic.

Conclusion: P2p is good for a small video surveillance system and bad for a large one. With a significant number of cameras, you need a very good Internet connection.

P2P IP surveillance cameras.

All IP video cameras today have a built-in p2p service, which may differ in functionality and adaptation to various platforms. Some services allow you to work on all types of platforms, for example: mobile applications, sms for PC or through a special client site, while others only support work on mobile devices.

P2p camera can be an independent video surveillance system if it has a slot for a flash drive. Such a camera can record video, which in turn will be available through a special mobile p2p client.

There are also multimedia ip cameras that have a speaker and microphone on board. Such a device can not only output sound from the microphone to the client application, but also receive sound from the program to output it through the speaker of the video camera.

p2p cloud.

Many people confuse a p2p service with a p2p cloud, naively believing that a camera can write to a cloud server for free. Unfortunately, this is not the case, the p2p functionality supplied with CCTV cameras is very limited, recording can be done either on the hard drive of the DVR or on a flash card, both drives can be connected via a client application.

A few words about what P2P is and what is the advantage:
P2P- a technology that allows you to get online access to the device via the Internet from a mobile or computer
P2P works on a unique ID code that is in devices with P2P. When an ip camera or NVR is connected to the Internet, they connect to the server and register on it, the client with the mobile application also connects to this server and gets access to video and control. The well-known TeamViewer works in a similar way when two PCs communicate with each other via a server by ID
P2P Advantage:
P2P technology does not require port forwarding, does not require DDNS, UPnP settings, only Internet access is needed to work.
It doesn't matter what your IP address is "white", "gray" dynamic or static, WiFi or 3G is the main Internet connection.
Each manufacturer has its own P2P server and its own application for connecting to the server.
This means that the OMNY ip camera will not be able to connect to the Dahua P2P server, because identification fails and vice versa.
A similar situation with Base and PRO.

Options for working with P2P
1. The most important thing is the presence of the Internet, because, as mentioned above, the camera accesses the server via the Internet.
2. Security - be sure to change the password, do not leave admin / admin by default, because someone who knows your ID will be able to watch your camera or recorder without your knowledge. There are those who are engaged in the selection of ID
3. By default, mobile applications use an additional stream for display, which is generally logical, because the smartphone screen is small and there is absolutely no need to display a heavy main stream.
The recommended bitrate for the additional stream is 256-512 Kbps at CIF, VGA, D1 resolution, check your stream settings, because often there is not enough mobile Internet bandwidth, it's one thing to download something, it's another to continuously pull the stream without delays and spilling pictures . Bitrate directly affects the delay and display of the picture.
4.Network settings in the camera or NVR. To access P2P, don't forget to fill in all parameters such as IP address, subnet mask, gateway, and DNS addresses, make sure that there is Internet access with these parameters. As an experiment, you can assign these settings to your computer for testing. The fastest option is to set the network settings to DHCP mode (if there is a DHCP server)
5.If,at your facility no Internet, You Not you can use P2P, but you can connect locally via Wi-Fi, for this, in the mobile application, select the option to connect by IP address. (not supported by Danale app)
6.Playback of the archive, when connected via P2P. As mentioned above, the mobile application displays an additional stream, BUT! The main stream is written to the archive, which is of high resolution, which means that the smartphone will need more effort and more Internet traffic to download the archive, which can affect the long response and constant swapping.
If you often watch the archive via your smartphone, you can enable additional stream recording on your NVR, and select the appropriate option in the mobile application - viewing the additional stream archive, in this case, viewing the archive is easier and faster, but do not forget that the camera which writes two streams at the same time, takes up more space in the archive, respectively, the storage period will decrease.
In what cases P2P may not work:

1. Valid DNS addresses are not specified in the network settings of the camera or recorder. The most common mistake.
To work with P2P, we recommend setting the network parameters of the device to DHCP mode
2.Low speed Internet connection, even if the smartphone shows you 3G,4G. Try stable Wi-Fi.
3.On the server can be held professional work, update, etc. you just have to wait
Do not forget that the servers are located abroad, and it is possible that somewhere there was an accident on the communication line.
As a rule, even the largest accidents are eliminated in a maximum of a week.
Unfortunately, we cannot influence the speed of professional work.
4.Device does not support P2P. Devices prior to 2015 are not and will not be supported.
Devices 2015-2016 are partially supported, depending on the current version, check with technical support.
Some Dahua devices do not support P2P as intended by the manufacturer, such as PTZ cameras, multi-apartment IP intercoms
This due to security, multi-apartment intercom should not have Internet access and PTZ cameras as a rule
put on large protected objects, where access from a mobile phone is contraindicated.
Please note, if your product does not support P2P, you can connect it in the traditional way by IP address!
5.Incompatible firmware version. Firmware for OMNY can be found for Dahua on the official website https://www.dahuasecurity.com/
6.The device does not pass identification on the P2P server. This can happen if the serial number of the device is not true, for example, it looks like 8888888888 or is completely missing. In this case, contact technical support.
7. Wrong mobile application. Make sure you are using the appropriate mobile app for your product and the latest version.
8. Incorrect connection data, double-check your login / password, do not use special characters for the name, login, password.

Now in more detail about the features in connecting each of the products:

OMNY PRO
OMNY PRO series IP cameras and NVRs support P2P connection on iOS and Android mobile platforms.
Devices after 2016 are supported in the Windows program with a P2P connection.
To connect from a mobile, you need to download and install a free application EasyLive
(previously used Smartwatchman, MobileLive but they are no longer relevant)
There is an instruction in Russian and other programs for OMNY
Briefly: Application EasyLive scan the QR code that is on the WEB page of the device in the preview (below the QR icon)

The QR code contains an identifier, in the login / password field, enter the real data of your device.
Make sure that your smartphone and OMNY device have Internet access, and that DNS is enabled in the network settings.

OMNY Base
IP camera series OMNY Base support P2P connection only on iOS and Android mobile platforms
To connect, you need to download and install a free application Danale
There are detailed instructions (English) and other programs for OMNY Base
Briefly: With Danale APP, scan the QR code that is in the camera on the WEB page (System/system information)

Dahua IP cameras, NVR, HCVR, Intercom


Dahua devices support P2P connection both on mobile platforms and on a computer.
To connect on a mobile device, you need to download and install the application DMSS
There are various versions of the application, DMSS Lite, DMSS plus, DMSS HD
We recommend installing DMSS Lite. The paid plus version is practically the same, the HD version for tablets, but Lite also works with a tablet.
By there is detailed information and other programs for Dahua
Briefly A: First of all, P2P needs to be enabled on the device. Depending on the release, the tab may be located in different places, but as a rule it is located in the network settings. Click Enable to enable. A successful connection is the status of online or connect success
Use the DMSS app to scan the QR code.
To work on a computer: Install the program on the add devices tab, select the P2P type and manually enter the serial number, which is located in the same place as the QR code.

The Internet is a suitable medium for remote surveillance, so obsolete analog devices are increasingly being replaced.

Moreover, p2p-cameras, which are distinguished by their availability, functionality and ease of setup, are in increasing demand.

Before you understand the operation of a p2p camera, it should be noted that this device is a kind of standard ip camera. The only difference is that p2p technology is based on remote identification by a unique device code (ID number).

And unlike classical solutions, where a connection requires a static IP address and UPnPct and DDNS services, here only an identifier is used to establish a connection.

As you can see, the camera performs all the same functions: it transmits audio and video to the surveillance device via the Internet. But unlike classic ip-solutions, a simplified principle of operation is used here. This makes it easier to set up for users who are not familiar with how network technologies work.

How to set up a p2p surveillance camera

This technology appeared thanks to Chinese manufacturers who popularized IP video surveillance, providing ordinary customers with a functional, and most importantly, simple solution.

The principle of operation is really simple: as soon as the camera connects to the network, it automatically accesses the remote server of the p2p service with an identification request. Once a connection is established, this server can be accessed by an end user monitoring device that knows the ID code.

Depending on the model, the connection is via 3G, Wi-Fi or lan-cable. An ID code is used for identification. With it, the camera is tied to the installed program responsible for video surveillance.

To synchronize the device, the user just needs to manually enter the code (product number) in the program window or take a picture of the QR code with a smartphone (if it is used as a video surveillance monitor). P2p camera setup:

• choose a place for installation;
• install the camera and connect the power;
• install the program that comes with the kit;
• connect the device to the Internet;
• synchronize the operation of the camera by entering the ID-code into the program window.

If the software is not included in the kit, it is downloaded from the official website of the manufacturer. Some of the official programs work with devices from other manufacturers. But the use of alternative software is allowed.

Wanscam Center Monitor is compatible with Windows XP/7/8. For Windows Phone, Wireless IP Camera P2P is used. Googleplay for Android offers the P2PWIFICAM app. For Apple products, IP Cam Viewer Pro is offered.

Thus, the setup is reduced to a few simple steps and it will take the average user 10 minutes. After installation, it is desirable to test the available functions: video recording and two-way voice communication.

p2p surveillance camera device

Depending on the conditions of use of these cameras, a choice is made according to specific parameters that are taken into account when purchasing.

The choice starts with the housing: available in a standard plastic or metal housing, protected from water ingress and rough mechanical impacts. Then the connection method is selected.

• wired, via lan-cable;
• wireless with Wi-Fi connection;
• wireless with mobile connection (GPRS, 3G, 4G).

The next operating parameter is resolution, it varies from 0.3 to 5 megapixels. Increasing the resolution improves picture quality, but requires higher internet speeds.

If video surveillance is installed in well-lit places, it is permissible to use video cameras without backlight.

Most models have an optional IR LED for shooting in the dark.

In addition to fixed non-reversible models, which are distinguished by an affordable price, PTZ p2p cameras are sold. In this case, turn control is remote, using the corresponding function provided in the software.

If the camera is used for security, it is recommended to choose a model with a motion sensor.

It activates shooting when an object enters the field of view. Functional models support working with MicroSD cards: in this case, shooting can be recorded on a memory card for subsequent uploading of video to the Internet.

Pros of p2p surveillance cameras

• Monitoring the perimeter of the protected area.
• Ensuring the security of private residences.
• Ensuring the security of various small business facilities.
• Supervision of children, pets or patients.
• Monitoring street traffic.
• Surveillance in state and municipal institutions.

Easy setup. The main advantage of this type of video camera is a simplified connection and adjustment procedure. P2P is the choice for security agencies and ordinary citizens who, without in-depth knowledge of Internet connections, want to organize remote video surveillance.

No reference to distance. Another obvious advantage is remote video surveillance. We are not talking about tens of meters, as is the case with outdated analog solutions: an IP camera is capable of transmitting audio and video signals to anywhere in the world, an Internet connection is enough.

Use of various devices for monitoring. For video surveillance, almost any device with Internet access is suitable: a personal computer or laptop, tablet or smartphone. All you have to do is install the necessary software and enter the camera ID number.

Not tied to an IP address. Often, maintaining a static IP is a problem for Internet users, as some providers provide access to a network where the address changes automatically every time you connect. A static IP is a binding to a specific computer.

The lack of binding to IP allows you to use the camera anywhere without additional configuration, which is convenient when periodically changing the place of observation. In addition, p2p cameras work smoothly on the Internet with a dynamic IP.

Flexible product range. Devices of any price category and functional purpose are available to the buyer. Thus, depending on the budget and tasks, you can purchase a camera with minimal functionality, which will replace a baby monitor, or a security camera protected from weather conditions and rough physical impacts.

The disadvantages include the illumination of the picture with an IR illuminator with excess power, as well as interruptions in operation when the Internet speed drops.

How to use

Before choosing a p2p camera, the conditions under which it is planned to carry out video surveillance are taken into account.

To prevent malfunctions, protect the camera from adverse influences (moisture, mechanical damage).

When using it, it is important to make sure that you have reliable 3G coverage or sufficient Wi-Fi signal strength.

When using the camera outdoors, models in a protected, weather-resistant housing are used.

The use of excess should be treated with caution: dust, fog, rain and snow lead to reflection of the spotlight and light up the picture.

It is important to note that use for covert surveillance is illegal in some countries.

Manufacturers and models of p2p surveillance cameras

Falcon Eye

Falcon Eye is a leader in the production of affordable devices for the market and security systems, registered in Russia in 2005. Offering a wide range of p2p cameras, it quickly gained popularity in the Russian market. The company's products are certified according to the international ISO-9001. Popular brand solutions:

All cameras shown are equipped with