Do you want to set up home Internet or Wi-Fi, but you cannot enter the ill-fated address 192.168.1.1 go to the router (LINK, if not, read on)? This guide is for you. Very often, providers independently configure their devices: routers, routers, set-top boxes, FTTB equipment.
But, as a rule, this requires additional time or money. Although the user is able to understand this issue even with minimal knowledge. With our tips and advice, you will learn how to go to 192.168.1.1, set up the Internet or Wi-Fi, and get a lot of other useful knowledge on how to properly and securely configure network devices.
Login http://www.192.168.1.1 admin video manual on how to enter the router settings.
We remind you that to configure devices from D-Link, you must use a different login address, namely http:// , password and login admin/admin.
First, a few simple concepts to understand the issue. The address 192.168.1.1 is nothing more than an IP, which can usually be assigned by default to some types of devices, such as Internet modems, routers, routers, etc. By entering this address, as the name of any site, into the address bar of a browser such as Firefox, Chrome or Opera, you can enter the settings of this device. Some new router models are configured via the Internet at tplinklogin.net (admin admin) and routerlogin.net.
If you did everything correctly and the connection to the IP address was successful, you will see a window for entering a login and password, by entering which you get full access to the settings. The standard login and password are usually admin/admin, administrator/administrator and other combinations, you can find more details in the instructions specifically for your model.
If you can't access 192.168.1.1 and 192.168.0.1 when setting up the router.
If you can’t log in to either 192.168.1.1 (log in to the TPLink router) or 192.168.0.1 (log in to the Dlink router), usually in this case you receive the error "Page not available", "Page not found" or "Unable to connect to the server" and etc.
What to do in this case?
- Make sure the device is connected correctly, i.e. connected to the network (while the indicators on the device case should be lit), the network cable must be connected at one end to the modem, router or router, and at the other end to the computer or laptop. This is a prerequisite for initial setup. (Sometimes a Wi-Fi connection is enough, but it's better to play it safe and connect with a network cable.) If everything is connected correctly, the Power and LAN lights on the case should be lit. If these indicators are off, then your modem or router is broken!
- Check the network settings, for this you need to go to the appropriate section of the Windows control panel. In Windows XP it is "Network Connections", in Windows 7 and 8 it is "Network and Sharing Center". We find the icon of your network connection, depending on the configuration, it can be either "Local Area Connection" or "Wireless Network Connection". Hover over it with the mouse and press the right button, then go to the item "Properties" - "TCP / IP v4". In the standard version, all the checkboxes are set to automatic, you need to set the following parameters: IP: 192.168.1.2. Subnet mask: 255.255.255.0. Default gateway: 192.168.1.1. DNS: 192.168.1.1. Gateway: 8.8.8.8. And click OK.
- Check the Internet browser settings, for this, in the "Control Panel", select the "Network and Internet" section and go to "Internet Options". Next, at the very bottom of the tab, you need to go to "Network Settings" and make sure that the checkbox is not checked in the proxy server settings, otherwise we remove it.
- Try accessing http://192.168.1.1 from another Internet browser such as Firefox, Google Chrome, Opera. Perhaps the connection is being blocked by one of these browsers.
- Reset your router, modem, or router by pressing a paperclip on the reset button on the back of the device.
- If all of the above actions did not lead to a positive result, try disabling the Windows Firewall and all kinds of other firewalls, antivirus programs and firewalls. You can also disable the Firewall through the "Control Panel".
If all else fails and you still cannot connect to the settings, most likely the device is faulty, contact a specialist or technical support from your Internet provider.
Sometimes it happens that the connection to 192.168.1.1 is successful, but it does not let you into the settings because of an incorrect login or password. In this case, resetting the parameters to standard ones via the reset button is also suitable.
Note: for some models and manufacturers of network devices, 192.168.1.1 is the standard address for entering the web interface. But sometimes, depending on the network configuration, a different address may be required for configuration - 192.168.0.1. Popular network device manufacturers: Zyxel, TP-Link, Cisco, Lyncsys, Upvel, D-Link, Asus, Sagemcom, Netgear use these two addresses in most cases.
If it doesn’t help, study the detailed instructions with the video - how to enter the settings of the TP-link, D-link router, etc. Ask your questions in the comments!
192.168.1.1 - the main address for configuring modems, routers and the Internet.
192.168.1.1 admin admin - a pair of login and password to access the web interface for configuring routers and modems, as well as other network devices.
192.168.1.1 admin is the main administrator password.
http://192.168.1.1 - ip-address that you need to enter in the top line of the browser to access the device settings.
192.168.1.1 login - through any Internet browser.
192.168.1.1. and http://192.168.1.1/ - spelling options for the address of network settings, including Wi-Fi devices.
192.168.1.1 admin password - the main password for accessing the settings.
192.168.1.1 configuration - is performed after entering the web interface and the configuration menu for a specific type of network device.
192.168.1.1 admin admin password - the most popular login and password for configuring routers and routers, it is advisable to change them after configuration.
http://192.168.1.1 login via admin - enter this address in your browser to login.
192.168.1.1 login admin password admin - what you need to enter when the login window is displayed. 192.168.1.1 administrator login - login with an administrator login and password to configure the Internet or Wi-Fi network.
http://192.168.1.1/admin is an invalid login address.
192.168.1.1 login admin - to enter you need to know the login and password from your device.
192.168.1.1 admin admin password login - if this combination is suitable, you can proceed to the Internet connection.
192 168 1 1 - spelling of the address without spaces, also incorrect.
http://192.168.1.1 input - the word "input" does not need to be written.
192,168,1,1 is also wrong.
192.168.1.1 password - the login password can be changed in the corresponding item of the web interface.
http://192.168.1.1 login admin password admin - standard account to enter the settings.
192.168.1.1 Wi-Fi setup - after creating an Internet connection, make sure that it works and proceed to setting up a wireless Wi-Fi network.
192.168.1.1 admin admin set up wifi - you will be able to set up a wireless network only after connecting the device to a computer or laptop.
192.168.1.1 admin/admin - use this pair to enter settings.
192.168.l.l - Invalid login address.
192.168.1.1 login - enter this address in any browser to login.
192.168.1.1 admin - panel - settings panel for your device.
192 168 1 1 admin admin configure wifi - configure wi-fi only if your device supports this function.
This instruction will tell you how to install, connect and configure a Wi-Fi router by logging into the admin panel http://192.168.0.1 or http://192.168.1.1 for D-Link DIR-300 and DIR-615, TP- Link TL-WR740N and TL-WR841N, Tenda N301 and other routers using these IP addresses to access the Personal Account. This information will be useful for everyone who sets up a Wi-Fi, Internet or IPTV wireless network for the first time in their apartment or private house.
The sequence of actions that will allow you to enter the router settings is as follows:
1. Turn on your modem or router.
2. We connect it with a network LAN cable to a computer or laptop
3. Launch a web browser (Google Chrome, Internet Explorer, Opera).
4. Enter the router's IP address in the address bar. Depending on the model and brand of the router (TP-Link, Dlink, Tenda, etc.), they can be as follows:
- 192.168.0.1
- 192.168.0.10
- 192.168.0.50
- 192.168.1.1
- 192.168.8.1
- 192.168.88.1
- 192.168.100.1
Also, instead of IP, a symbolic address of the site can be used:
- tplinklogin.net
- tplinkwifi.net
- tplinkmodem.net
- routerlogin.net
- my.keenetic.net
- netis.cc
WiFi router personal account - what is it ?!
Logging into your WiFi router's personal account to configure it is quite easy. To do this, simply enter its ip-address - http://192.168.0.1 or http://192.168.1.1 - in the address bar of the browser. Many users refer to the web interface as the site of the router and believe that in order to access it you need an Internet connection. This is wrong. On the contrary, for the initial setup, it is not recommended to connect the provider's cable to the device before the necessary parameters are set.
If you do not know which IP is used on your router - 192.168.0.1, 192.168.1.1 or another - you can use the hint that the manufacturer left for users in the form of a sticker. You can find it on the case at the back or bottom. Here is an example for D-Link DIR-300:
As you can see, the D-Link router uses 192.168.0.1 login admin, password admin.
But the sticker on the router Rostelecom Sagemcom [email protected] 2804v7:
On this model, IP is used to enter the web interface 192.168.1.1 admin/admin.
How to further configure the router
So, you managed to enter the router settings and don't know what to do with it next?! The procedure is usually like this. First you need to set up an Internet connection. this is done in the "WAN" or "Internet" section. To do everything right, first find out in the technical support of your telecom operator - which protocol you use - PPPoE, IPoE or something else. If PPPoE is used, then you also need a login and password to connect.
If you are using a static IP address, then you need information about the address you are using, mask, gateway, and DNS server.
The second step is usually to set up the WiFi network. Here everything is usually easy and simple. You must first come up with a name for the wireless network - SSID. Then - the password for Wi-Fi. As a password, it is better to use a key phrase no shorter than 8-10 characters and numbers and letters of the Latin alphabet.
The third stage is setting up IPTV - digital interactive TV. Usually, one of the LAN ports is separated for this, which is configured for the STB set-top box.
Sometimes, for some programs or games to work, it is also necessary to set up port forwarding or other services. After that, the router settings are saved and you can connect the provider's WAN cable to the connector on the router.
For more information on your router model, look on the Internet.
Login 192.168.0.1 or 192.168.1.1 - page is not available and does not open
Despite the fact that the process of setting up common network devices for home and small office is relatively simple, it is still very common for users to encounter difficulties. This is especially true for beginners. One of the common problems is that when trying to access the router via http://192.168.0.1 (or via http://192.168.1.1), the user gets a “page not found” error and the web interface does not open. To solve it, there are the following ways.
1. Try a different web browser. Often you have to deal with the fact that due to a malfunction or a crooked cache from a web browser, you can’t access the router. Try clearing your cache and cookies. If it doesn't work, use a different browser. As practice shows, Internet Explorer and Microsoft Edge are best for accessing network device settings through 192.168.0.1. You can also try to log in using Safe Browser Mode. In Google Chrome, this mode is called "Incognito".
2. Turn off your antivirus software and firewall. Very often, the computer does not go to the router due to the fact that for some reason it is blocked by the antivirus. A vivid example is Kaspersky Free Antivirus, which has to be completely deactivated in order to get into the modem or router configurator.
3. Check the network card settings. Very often you have to deal with the fact that users have any addresses registered in the parameters of the network card. By itself, with such settings, you will not be able to log in to the router at http://192.168.0.1 or http://192.168.1.1. To check this, open the Windows settings and go to the section Network and Internet | ethernet. and click on the line "Configure adapter settings":
Next, in the list of network connections, select the adapter through which you are connected to the router or modem and right-click on it. Select the "Properties" menu item to open the following window:
Double click on the line IP version 4 (TCP/IPv4) and see this window:
In most cases, to successfully connect to the router, it is enough to leave the receipt of addresses in automatic mode. If, in this way, logging in to D-Link, TP-Link or Tenda via 192.168.0.1 is not available, try entering the parameters manually:
We write the values as in the figure:
IP address - 192.168.0.222 mask - 255.255.255.0 Gateway - 192.168.0.1 DNS - 192.168.0.1
click on the "OK" button and check access to the network device.
4. Try to connect to the router from your phone via a wireless WiFi network. To do this, many manufacturers even have special mobile applications for configuring routers. For example, TP-Link Tether, D-Link WiFi, Zyxel My.Keenetic, etc.
5. If all else fails, try resetting the router with the Reset button.
It is located on the back of the device. Use a paperclip or pencil to press. Hold Reset pressed for about 8-10 seconds, then release.
If you are looking for information on the request “http://192.168.1.1 login and password”, then you may have encountered the following situations:
First situation. In the browser address bar (Opera, Firefox, IE, Chrome) you enter http://192.168.1.1 (Figure 1).
A browser window opens (as in Figure 2 or similar) with a suggestion to enter a login and password in the appropriate request fields. And you do not know what login and what password is on your modem (router, router) or the password that you have is not suitable.
I will not consider dozens of models of ASUS, TP-Link, D-Link modems, but will write a universal instruction for solving such a problem. Just read everything and choose the options that are convenient for you.
- Most often, the word admin is suitable as a login and password.
- Often the login and password are indicated on the back of the modem (see the sticker).
- You can also see the password and login to enter the router settings in the instructions that are usually attached to the modem (look in the initial paragraphs, which describes how to get started with the device and provides the address - for example, http://192.168.1.1 - to enter the settings) or you can simply download the instructions from the manufacturer's website.
- In the case when the router was given to you by the Internet provider, then the necessary data on setting up the modem can be obtained from him. Call the provider - and you will be happy :).
If none of the above helped, or rather, you probably found the correct username and password, but you couldn’t enter the router settings, then:
- Or the login and password have been changed in the modem.
- Or a software failure has occurred.
In any case, there is only one option. Find and press (hold for 5-7 seconds) the “RESET” button (most often the “RESET” button is located at the bottom of the router). But it is important to consider the following: after you press the “RESET” button, all modem settings will be reset and you may need to configure sometimes only WiFi (if you need it), and sometimes Internet settings.
Attention!
If after all these steps you could not enter the modem settings, then your modem is faulty, and you need to either replace it, or reflash it, or send it in for repair. And no specialist in the field will be able to configure the modem at home.
Second situation. In the address bar of the browser, type http://192.168.1.1 (Figure 1), and as a result you get a page, as in Figure 3. This indicates that there is no connection with the modem. There can be many reasons. How to solve this issue, I will write in detail in the article “http://192.168 1.1 go to the router”.
I note by the way that when buying a modem, it is better to first ask your Internet provider what device he will recommend. This will greatly facilitate both your life and the life of the Internet provider if you have questions about setting up the Internet.
This article will be useful to those who want to go into the settings of their router. Since on most routers the address 192.168.1.1 is used to log into the system, this guide will be universal and probably very popular. Regardless of what kind of router we have and what parameters we want to change, we first need to enter the settings. Get access to the control panel. And you can do this at the address, or.
On routers from such popular companies as TP-Link, ASUS, ZyXEL, D-Link, Netis, Tenda, Totolink, everything is about the same. In any case, you can always find out the factory address. For example, look at it on the device case, or in the connection properties on the computer. We will return to this.
If you do not understand what this article is about, what these addresses are for and what we will do in general, then I will try to explain. If you are in the subject, then you can not read what is written under the spoiler.
On Huawei it's usually 192.168.100.1. In the article I will show one way, using which you can open a page with the settings of absolutely any router or modem. Even if you don't know his address. After all, it can be changed and not correspond to the factory one. which is indicated on the device.
How to go to 192.168.1.1?
On device (computer, laptop, smartphone, tablet), which is connected to a router or modem using a network cable, or a Wi-Fi network, you need to open a browser. Any will do. But I advise you to use the standard. I will log into Windows 10 through Microsoft Edge.
In the line where the site addresses are displayed, enter the address. Or http://192.168.1.1. Press Enter to navigate.
And if you entered the address correctly, the device is connected to the router and configured, then the page of your router will open.
At this stage, many are faced with a problem when the page with the router settings for some reason simply does not open. If this is your case, then see the solutions at the end of this article.
If a search engine page opens, then make sure that you are not entering the address in the search bar. Or better yet, open it with a different browser.
I have an ASUS router and it asks for a username (Login) and a password (Password) for authorization.
We indicate these data and get into the personal account of the router. Yes, many people call the web interface that way, but this is not entirely correct. The personal account is with the provider.
Another simple, versatile and working way. On the computer, go to the explorer, on the "Network" tab. Our router should be displayed there. Right-click on it and select "View Device Web Page".
A browser will open with the page of our router. No need to manually search for anything, enter, etc.
Let's take a closer look at the authorization process. Many in the comments ask about it. Not everyone understands what needs to be entered when the router asks for a username and password. And where can I get the login information for the router account.
Login to 192.168.1.1 via login and password (admin/admin)
Please note that the router does not always ask for a username and password. I have input on factory settings. And if it asks, then this does not mean that admin is required by default.
- On some routers, there is no authorization at the factory settings. The router system opens immediately. A window may appear asking you to set a username and password. And if not, then it can be done in the settings. I wrote about this in an article:.
- If the username and password request still appears, then they must be indicated on the body of the router itself.
In my experience:
- On TP-Link and ASUS routers, the default is always admin/admin. The address is usually 192.168.1.1.
- D-Link can also have admin. Or the username is admin, and the password field is left blank.
- The ZyXEL does not have a password set at the factory.
- Netis - no authorization. If the login and password were not set by the user himself.
- A web interface immediately opens on Tenda. The password can be set manually.
- Totolink - admin and admin.
In any case, there just appears a window asking for a username and password. It may look a little different. Specify them correctly - go to the web interface. If not, then an error will appear. If you changed and forgot this password, then we reset the router to factory settings.
I can't log in to the router, what should I do?
Not infrequently there are problems. There can be many reasons for not being able to access 192.168.1.1.
I'll tell you about the solution of the most popular.
1 Try the method I wrote about above in the article. When we open the web page of the router through Windows Explorer. 2 Restart your router. Try logging in with a different browser. When I can’t open the web interface, I first of all try to log in from another device. If it exists. 3 Next, you need to make sure that the factory address of your router is exactly 192.168.1.1. The address itself can be viewed on the router body (Must have a sticker with information). The factory "User Name" and "Password" are also indicated there.
If another address is indicated there, then go to it.
4 Be sure to check if there is a connection to the router. Even if the connection status is "Without access to the Internet", the settings page should still open smoothly. 5 If you are trying to log in from a computer or laptop, then check the IP settings. There should be an automatic receipt of addresses. In the properties of the local area network (Ethernet) connection, or wireless connection. Depending on how you are connected.If all else fails, reset the router to factory settings. But I do not guarantee that it will help, you need to try. It happens that the router is simply broken, so the settings do not open.
