Good news Surely reached you, dear readers. Finally, the jailbreak of all IOS compatible with the 6th version of the devices is generally available, and each wishes can hack your iPad, iPhone or iPod Touch. And we will now tell how to do it.

First you need to make sure that your device is updated to the latest IOS version - at the moment it is iOS 6.1. Jailbreak can be made both on iOS 6.0 and on iOS 6.1, if you have any reasons not to be updated to 6.1 - this is your right, as the program evasi0N. Can hack any iOS 6.

The following devices are supported:

iPhone 3Gs.
iPhone 4.
iPhone 4S.
iPhone 5.

iPad.

ipad mini.
iPad 2.
iPad 3.
iPad 4.

iPod Touch.

iPod Touch 4.
iPod Touch 5.

So, if you have one of the above devices at your hand, a Mac, PC computer, or even Linux and there is a huge desire to make an unacted jailbreak, then we need to perform the following completely simple steps.

Firstly, Make a backup of the device or via iCloud or in iTunes. You can do this by going to "Settings" - "icloud" - "Storage and Copies" - "Create a copy". Or the same procedure can be done on the computer by opening iTunes.

Secondly, Do not forget to remove the password if you have on your device.

Thirdly, Download Evasi0N for your computer, links:

If any of these links do not work, you can always download Evasi0N for your computer from the official site of the EVAD3RS team.

After the Evasi0N program is loaded, you need to run it. Windows users will first have to unpack the archive with the program, and Mac users mounted a DMG image. Connect the iOS device using a USB cable and make sure that you are closed iTunes. On the screen you should see the following:

This is an open window of the Evasi0n program, which we will hack the IOS-device. As can be seen on the screenshots, the iPhone 5 is connected to the MAC version of the program, and on the Windows computer iPhone 4. Make sure the program displays the real model of your device. If the device is not detected, then try disconnecting it from the computer and connect again.

If everything is fine, then you can go to the next step - this is a deep breath and pressing the "Jailbreak" button, after which the program will begin its work on hacking your device. Make sure that iTunes is closed with you, also the program will ask you to do nothing with your computer and with the phone.

As the progress scale is filling out, over which the current step on the path to freedom of your device will be displayed, it will be necessary to touch the iPhone, iPad or iPod Touch once. You will need to find the Jailbreak icon on the desktop and click on it once, after that the screen blinks in black and the cracking process will continue.

Now it remains only to wait for the moment when the program will happily inform us that the jailbreak process is completed and you can disconnect the device. Your Iidevays can reboot several times to ensure that all necessary actions are completed - do not be scared, it is quite normal. In the end, you will see the Cydia icon on the desktop, which means that all steps are successful and your Iidevice is now absolutely free!

In the very near future, we will tell you about what tweaks can be installed on the iPhone or iPad in order to use it even more convenient for them!

Questions answers

What is jailbreak? Is it not harmful?

No, it is not harmful, and sometimes even the opposite. Making a jailbreak device, you give the ability to install unsigned Apple software packages that can largely change the functionality of the Iideevis. Most often for the better.

What if Evasi0N hung / does not respond / shows an error?

If it seems to you that something went wrong, you can disconnect the device from the computer and restart, holding the lock button and the "Home" button. After that, the operation can be repeated.

Will I continue to buy applications and music in?

Will my purchases disappear after "Jail"?

In no case, with your Apple IDs nothing happens, you can continue to use the device as well as before Jailbreak.

It is said that the device begins to slow down from jailbreak. It's true?

No, it starts to slow down from jailbreak. Brakes can appear from relegation with tweaks installed.

Well, what is a tweak?

Twitch is most often a small program that adds functionality and ease of use by the device. For example, rapid settings in the notification center.

Where to get tweaks and which of them are good, and which no?

Twitters can be found in Cydia, app store, which is a jailbreak symbol. And about what tweaks need to be put, we will definitely tell you on the pages of our site.

Why Cydia swears on errors and does not allow anything to download?

Immediately after the release of the jailbreak tools on the Cydia server there is a huge load. Just wait.

What is a tied and unlocked jailbreak? What I just did according to your instructions?

Unchanging jailbreak allows you to fully use the phone. With a tied jailbreak after each phone restarting, you must make an "injection" by connecting to a computer. With Evasi0N you get an unacted jailbreak.

How to return to standard firmware / remove jailbreak?

Restore device via iTunes.

With the release of the new version of the RedSn0W, the iPhone Dev Team Hacker Group provided users of the iPhone 3GS with the old bootrom opportunity to carry out unnecessary Jailbreak iOS 6. How to make an unconnected Jailbreak iOS 6, you can learn from our instructions further.

If you were lucky enough to be the owner of one of the early iPhone 3GS models, then now you can enjoy the charms of a full-fledged unlocked jailbreak IOS 6, downloading Redsn0w 0.9.15b1 for Windows or Mac.

How to make an unconnected jailbreak iOS 6 for iPhone 3GS (Old Bootrom)

Step 1: Create a folder on the desktop and name it is Pwnage. Download RedSn0W and place the file to the Pwnage folder. Download the official IOS 6 firmware file and copy it to the same folder. Remove RedSn0W from the archive.

If you have not been updated on iOS 6, now is the time. If you have a locked iPhone 3GS / iPhone 4, you should be updated while saving the modem firmware.

Step 2.: Run the RedSn0W 0.9.15b1 in the administrator mode, if you are on Windows or make a click while holding the CTRL button, and select "Open" from the new menu, if you are an OS X Mountain Lion user.

Step 3.: Connect the device to the computer and click the Jailbreak button.

Step 4.: Turn off the iPhone and click the Next button.

Step 5.: According to the instructions on the screen, put the device on iOS 6 to DFU mode. To do this, hold the lock button 3 seconds. Not releasing the lock button, click the Home button for 10 seconds. Holding the home button, release the lock button. Continue to hold the button for 30 seconds.

Step 6.: Redsn0w will prepare everything you need for jailbreak. Check the box in front of the Install Cydia menu and click Next.

Step 7.: After automatic reboot, you will have an iPhone on iOS 6 with a jailbreak.

Note: If you saw the inscription "Tethered Jailbreak", then your iPhone 3GS model has a new bootrom and you need to download the smartphone in the "tied" mode.

From this point on, each time you have to restart or turn off, you will have to connect the device to the computer and translate it into the jailbreak mode using a special REDSN0W function. To do this, open the EXTRAS section and click the Just Boot button.

After the exit, unpaid Jailbreak for iOS 6 became available.

The following devices are supported:

• iPod touch 4G.
• iPhone 3Gs.
• iPhone4 (GSM)
• iPhone4 (CDMA)

The following instruction will help make unlined jailbreak Firmware 6.1.3 / 6.1.4 / 6.1.5

(Up to 13 steps is a previously well-known installation procedure tied Jailbreakif you know how to make a tied Jailbreak can immediately go to the 13th step)

Attention! All do at your own risk!

1. Download the last version of redsn0w (,) and unpack

2. Connect the device to the computer, run REDSNOW

3. Press Extras.

4. Click Select IPSW and specify the previously downloaded for your device.

5. Go back and press the jailbreak button

6. We see the instructions for the Jailbreak procedure (follow the instructions of the program)

Read more: You need to translate the device to DFU mode (if it does not work look like numerous video instructions in YouTube)

but. Turn off the device with the cable turned on

b. Press the HOME and POWER buttons simultaneously and hold 10 seconds.

in. Release the Power button and continue to keep home another 10 seconds

the device must go to DFU mode (the screen should be black)

7. RedSn0W will begin the procedure

8. After the end of Jailbreak, select Install Cydia option.

9. At this stage we get tied Jailbreak

10. To turn on the device, you must click on the EXTRAS button, select the iOS 6 firmware by pressing the SELECT IPSW button, and then press the JUST BOOT button

11. We again go to DFU mode as in paragraph 6

12. Now the device is loaded and you must see the Cydia icon on the desktop

13. Now you need to use the search and install tweak in Cydia

14. After rebooting, get unlined Jailbreak iOS 6

Until the device is in a tied jailbreak mode, you will not be able to turn it on normally without performing steps 10, 11 (6)

We remind you all you do at your own risk! We do not support piracy!

Allowing to get ancient Jailbreak IOS 6.1 / IOS 6, you probably have questions about it. This instruction for receiving iOS-hacking using Evasi0N for Windows and Mac will help you within 5 minutes to get the iOS 6.1 / iOS 6 jailbreak on your iPhone 5, iPad 4, iPad Mini, iPad 3, iPad 2, iPhone 4S, iPhone 4, iPhone 3GS and iPod Touch 4 and 5 generation.

Jailbreak iOS 6.1 / iOS 6 - Evasi0N. Instructions for Windows and Mac

1. Make your device through iTunes. or through icloud. (Settings –> icloud. –> Storage and copies –> Create a copy).

2. Turn off the password ( Settings –> Maintenance –> Password protection –> Turn off the password).

3. Download Evasi0N. From section « » on our website.

4. Launch Evasi0N..

5. Connect your device to a computer (iTunes on the computer should not be running). The following will appear on the screen:

6. If your device is not detected or detected incorrectly, disconnect the device and re-connect.

7. When the program has identified your device correctly, click on the button. "Jailbreak". It is very important during the jailbreak not to disconnect the device from the computer.

8. Closer to the end of the jailbreak process, the program will ask you to unlock your device on iOS and click on the icon Evasi0N..

9. After pressing your screen should blink in black and the jailbreak process will continue.

10. When Evasi0N. Complete all the necessary operations, the program will report that the jailbreak is completed. Click on the button "EXIT" To exit the program. Now the device can be disconnected from the computer. After that, your gadget can reboot several times - this is normal.

11. The result of all our actions should be an icon Cydia On one of the desktop pages on your device with iOS.

If on some of the stages Evasi0N. stopped working or issued an error, then disconnect the device from the cable and clamp the screen lock button and the button "Home". This will restart your gadget. After that you can try to make jailbreak again.

Another common problem faced by users - Cydia It works very slowly and gives errors. The reason for this is a large load on the server Cydia In the first few hours after the release of the jailbreak. You should wait some time and Cydia It will start normally function normally.

All successful attempts to receive a jailbreak using Evasi0N.Or about the problems that have arisen, please write in the comments below. We will understand together.

If You're An iPhone 3GS Or iPod Touch 4G User and Have Upgraded To Fix A Critical SSL Bug Then The Good News Is That It Is Still Possible to Perform An Untethered Jailbreak on Your Ios Device Using A Combination Redsn0w and p0sixspwn.

In this article We show You How to Jailbreak iOS 6.1.6 First using, and then converting it into an untethered jailbreak using Cydia Package.

Update (June 17):Please note a New Version of P0sixspwn Has Been Released Which Adds Support for iOS 6.1.1, So You Can Use P0sixspwn Directly to Perform The Untethered Jailbreak on Your Device Running iOS 6.1.6, Instead of Using This Workaround. You can Check Out Our. If You've Any Problem With That Method Then You Can Use This WorkAround.

Here are some Important Points to Note Before You Proceed.

• This Guide Is Meant ForiPhone 3GS and iPod Touch 4G Users AS IOS 6.1.6 IS Compatible with Only These Devices. If You're Looking for a Jailbreak for iOS 7 Or Higher Then Checkout Our for Links to the Latest Tutorials.
• Warning: If You Depend On to Unlock Your iPhone, Then Do Not Update to iOS 6.1.6.
• Please Note That May Void Your Warranty and Hence Proceed With And At Your Own Risk.
• Please do not forget to backup your ios Device Before You Proceed. You can for instructions on how to backup your ios Device using icloud or to backup your ios Device using iTunes.
• Please Ensure You are Running Latest Version of iTunes.
• This Method Use An iOS 6.0 Jailbreak WITH THE IOS 6.1.6 FILESSESTEM, SO IT COULD CAUSE SOME UNKNOWN ISSUES.

You Can Follow These Step-BY-STEP Instructions to Jailbreak Your iPhone 3Gs and iPod Touch 4G ON iOS 6.1.6:

STEP 1:Download Redsn0w 0.9.15b3 (RedSn0w 0.9.15 Beta 3) From and save the application in a folder named "ON Your Desktop.

Step 2: Download iOS 6.0 Firmware File (Yes, The Trick IS to Point Redsn0W To the iOS 6.0 Firmware File and Not. iOS 6.1.6 Firmware File) for your ios Device from the Links Mentioned Bell:

• Note: Please Ensure You Download The Correct iOS 6.0 Firmware File for Your iPhone Model. Check If You Need Any Help in Identifying Which Ios Firmware File To Download for Your iPhone Model.

STEP 2:Connect Your Device To the Computer and Double Click The Redsn0w Zip File and Extract The Redsn0W Folder and Launch The Redsn0W Application.

Windows 7 Users SHOULD RUN THE EXE IN Windows XP Compatibility Mode (Right-Click on the Redsn0w Exe and Select Properties, Then Select The Compatibility Tab and Select Run This Program in Compatibility Mode for Windows XP). Windows XP and Windows 7 Users Should Run RedSn0W AS 'Administrator'(Right-Click on the RedSn0w EXE and SELECT 'RUN AS AN ADMINISTRATOR').

STEP 3:Click on extras button.

STEP 4:Then Click On The Select ipsw. Button. Navigate and Select The Firmware File Download in Step 2. IT SHOULD SUCCESSFULLY Identify It and Inform You That It Will Be Used in the Rest of the Session.

STEP 5:GO Back to Redsn0w's Main Page and Click on the Jailbreak Button.

STEP 6: RedSn0w Will Now Start Preparing The Jailbreak Data.

STEP 7: You Will Now Be Prompted to Select The Jailbreak Options. Make Sure. Cydia IS Selected and Click on the Next Button to Continue. You can also select Enable Battery Percentage. Option.

STEP 8: You Will Now Be Prompted to Put Your ios Device Into The Dfu Mode. Turn Off Your Device, However Keep It Plugged in to the Computer.

STEP 9: Click on the Next Button. Redsn0w Will Take You Through The Necessary Steps:

Home Button.

STEP 10: Your ios Device Should Reboot Now. Please Remember to Release The Home Button.

STEP 11: Your ios Device Will Reboot Again and Redsn0w Will Now Begin Uploading The New Ram Disk and Kernel.

STEP 12: You Will Be Notified Once The Jailbreaking Process Is Complete. Click on the Quit. Button to Exit The Application.

STEP 13: The Rest of the Process Will Take Place On Your Ios Device, Wait for It to Complete. Your iOS Device Will Reboot Once Again (Which Could Take Approximately 5 Minutes). You Will Now See The Home Screen On Your Ios Device, But Cydia Would Still Be Missing, That's Because You Still Need to Tether Boot Your Ios Device using Redsn0w. SO Follow The Steps Mentioned Below.

Boot Tethered:

STEP 14:Launch Redsn0w Again.

STEP 15:Click ON. Extras. Button.

STEP 16:Then Click On The Select ipsw. Button. Navigate and Select The Firmware File Downloaded in Step 2.

STEP 17: Then Click On The Just Boot Button.

STEP 18: You Will Now Be Prompted to Plug Your ios Device to the Computer and Switch IT Off Again. Follow The Instructions and Click On The Next Button to Move to the Next Screen:

STEP 19: You Will Now Need to Put Your iOS Device Into The Dfu Mode. Redsn0w Will Take You Through The Necessary Steps:

(a) HOLD THE POWER BUTTON ON YOUR IOS DEVICE DOWN FOR 3 SECONDS:

(b) Now Simultaneously Hold The Home Button. And Keep The Two Buttons Pressed For 10 Seconds:

(c) Now Release The Power Button While Keeping The Home Button Predect Until Redsn0W Detects The Device:

STEP 20: Redsn0w Will Recognize The iOS Device in Dfu Mode and Apply The Limerain Exploit (Remember to Release The Home Button). Your iOS Device Will Reboot and a Pineapple Logo Will Appear, Indicating a Tethered Boot.

STEP 21: Wait For the Process to Complete, Once It Is Complete, You Should See The Lock Screen On Your Ios Device.

Your iPhone or iPod Touch Has Now Been SuccessFully Jailbroken and You Should See Cydia On The Home Screen. If You Don't Find It On The Home Screen, Please Don't Panic, Search for It using Spotlight. The Jailbreak IS Currently A "Tethered" Jailbreak,

Convert Tethered Jailbreak to Untethered Jailbreak using P0SIXSPWN:

STEP 22:Launch Cydia. SINCE You're Launching Cydia for the First Time, You may be Prompted to do An Essential Upgrade. Please Go Ahead and Do It, And Thene Relaunch Cydia Again.

STEP 23:TAP On The Search Tab, and Search for P0sixspwn.

STEP 24: TAP on P0SIXSPWN from The Search Results, Tap On Install, Followed by The Confirm Button.

STEP 25: TAP ON. Return to Cydia WHEN PROMPTED.

That's IT, your ios Device Has Now Been SuccessFully (UnteThered) Jailbroken.

Troubleshooting Tips:

1. CAN'T FIND CYDIA:

IF You Can't Find Cydia on the Home Screen Then Double Check You Have Tethered Boot Your Device. Please Ensure You've Followed Steps 14 to 21.

2. Unsupported IPSW:

If You Get An Error Message Informing You That The IPSW IS Not Supported by This Version of Redsn0w, Then It Means You've Downloaded iOS 6.1.3 Firmware File in Step 2 Instead of IOS 6.0 Firmware File. Please download iOS 6.0 Firmware File to Jailbreak Your iOS Device Running On iOS 6.1.3.

3. Cydia Closes Immediately:

If Cydia Closes Immediately When You Try To Launch It, It Means That You Have't Installed P0sixspwn Package From Cydia. Follow Steps 22-24 Mentioned Above to Solve This IsSue.

Related TOPICS:

If you're New to the Jailbreaking World and Wondering What to do After Jailbreaking Your iOS Device, Checkout Our Category Page to Find Out The Apps You Can Install on Your Ios Device using the.

Hope This Helped. Please don't Forget to Let US Know How It Goes in The Comments and If You Hit Assues Start A Thread In for Help.