Almost any Android smartphone over time starts to perform worse than at the time of purchase. To fix this, many users recommend doing a "Factory Reset" or Hard Reset. In addition, a factory reset is performed for a more correct installation of the new firmware and before the sale of the device. For example, we will consider resetting the settings on Xiaomi Redmi 3.

There are several ways to do a factory reset, but some devices simply cannot be reset to factory settings for each of them. Because of this, for example, for Xiaomi Mi5, a hard reset is impossible by entering the recovery due to a locked bootloader.

Simple method

There is a simplified method especially for such devices. To activate it, the owner of the device must simply open the settings, select the "restore and reset" item, and then carry out the reset procedure to the factory settings.

Xiaomi Redmi 3, factory reset

If we talk about hard reset for Xiaomi Redmi 3S, then here you can carry out the procedure in all available ways. Why is that? It's all about the unlocked bootloader, which allows you to penetrate more deeply into the device's parameters.

Reset via recovery mode

This method is only relevant for models based on Qualcomm processors with an unlocked bootloader. So, in order to carry out a hard reset on Xiaomi Redmi 3 (the same method is suitable for other smartphones of the company), you need to take a few simple steps.

1. You must turn off your device.
2. For the safety of personal data, it is better to remove the SIM and SD card.
3. The next step is to hold down the power key until the smartphone vibrates. Then we hold down the volume button "+" for 10 seconds.
4. The appearance of the "Mi" logo informs that it's time to release the power button while holding down the volume up button.
5. The choice of language appeared before us. We choose English. We confirm the selection with the "power" button.
6. Then the MAINMENU will appear in front of us, in which you need to select the "Wipe and Reset" item using the power and volume keys.
7. Now we select the item "Wipe User Data", which will mark the complete removal of user data.
8. We agree with the terms, select the item "Yes".
9. We are waiting for the Xiaomi Redmi 3S Hard Reset to be completed.
10. That's all. Now we have one step left - reboot.

Hard reset of this type is relevant for almost all devices of Mi and Redmi models, including Xiaomi Redmi Note 3 Pro and Xiaomi Mi4, only if they all work on Qualcomm processors.

Reset through third-party recovery

This method is not relevant for all devices of the company, however, it is quite popular among users of custom firmware. What is the reason for this? Many owners of Xiaomi phones install their own version of the recovery, which is why the previous instructions will not work for them. For example, our editor installed TWRP Recovery on his Xiaomi Mi4, and an employee of the SEO department on Xiaomi Mi3 uses the CWM version.

As a rule, everyone sets recovery differently, however, the reset through them is carried out according to a similar algorithm.

1. The first step will also be to turn off the device.
2. The second, as expected, will be the launch of the recovery, by holding down the power keys and increasing the volume.
3. After that, the user will have to select the item "Wipe all user data", without choosing a language, since it is selected by default in English.
4. The next step is to select "yes" to start the process.
5. At its end, the item "Wipe Cash" or "Wipe Dalvic" is selected. If both items are present, an alternate reset of each of them is done.
6. Once the process is complete, select "Reboot System Now" to reboot the device.

Now you know how to hard reset on Xiaomi smartphones, we hope this instruction helped you. If you have any questions or additions to the article - write in the comments, we will definitely answer.

Today you will not surprise anyone with the new xiaomi model. This manufacturer has been supplying its smartphones to markets around the world since 2014. Top models in their characteristics are not inferior to the flagship models of Samsung and Huawei. Therefore, the popularity of Xioami is quite justified.

With the increase in the number of gadgets, the number of questions and nuances on their use also grows, especially among the elderly. In this publication, we answer some of the most popular questions: how to do a general reset Xiaomi, i.e. factory reset?

Why do this?

If after prolonged use, your android system began to slow down and freeze
The graphic or numeric password was entered incorrectly, or you simply forgot it
Preparing the phone for sale

What is important to know:

Photos, accounts, downloaded apps, music, videos and other information will be completely deleted

For the entire model range xiaomi (Mi 4 / 4х / 4a, Redmi note 3/4/5 and so on) there are several basic reset methods.

Standard reset xiaomi via menu

To do this, in the menu tab "Settings" select the item called "Restore and reset"... Next, click "Reset" and confirm our actions by pressing "Yes".

Having trouble? Here's a video example of Hard Reset on Xiaomi through the settings.

Reset via recovery mode

After that, the smartphone will reboot and a notification will appear on the screen with a greeting and further settings. This usually takes a little longer than normal device booting.

Here are some video examples:

Factory reset Xiaomi Redmi 4x

Factory reset Xiaomi Redmi Nota 5A

Xiaomi Redmi 3S / 3X Hard reset

Slightly different, because you need a special program. Similar to the method below.

Factory reset via firmware update (xiaomi firmware)

The most difficult and not secure.

No one guarantees that during its use no failures will occur and your xiaomi will not turn into a brick.

1. Manual flashing

• Download the MIUI ROM Flashing Tool on your PC or laptop, and from the official MIUI website (http://en.miui.com/download.html) the latest firmware version EXACTLY for your model;
• Activate FastBoot mode on your phone. To do this, turn off the device and press two keys simultaneously - Volume Down and Power (Power Button);
• As soon as the phone boots up in this mode, you will see a picture with a MIUI man and Android on your screen;
• Now connect your smartphone to the computer via a USB cable, unzip the archive with the firmware and copy the path to this file from the explorer;
• Open the program, in paragraph Select manually specify the path to the folder with the firmware, or just paste the path you just copied from the explorer;
• Click on the tab Refresh, after which the system will automatically recognize the new device;
• At the bottom of the program, be sure to check the box next to Clean all, and click on the tab Flash;

The system will automatically start the process of removing the old firmware and installing the new one. As soon as the progress bar turns green and the Success notification appears on the right side of the program, you can remove the device and try to turn it on.

1. Automatic sewing with PC Suite and factory reset on xiaomi

We hope that our material was useful to you, and if you have any questions, ask them in the comments. We will try to help.

Many people ask the question of how to reset Xiaomi? In many cases, Xiaomi smartphones can get blocked due to some additional reason. A few examples: your toddler was playing with his phone, your friend did a smart job with your phone, you put your phone in your pocket and forgot to turn off the screen, or you might just forget your password. Well, honestly things like that can happen in your life. How to unlock the Xiaomi Redmi 4 password? "Step-by-step instruction"

Instead of saying, “Oh my God! What happened? », You can read this two-center trick on how to reset Xiaomi security lock password, be it word password, PIN or even pattern lock. So, keep calm and read:

Note. You may lose most of the data stored on your phone, such as contacts, SMS, etc. Make sure you make a backup. Moreover, this method is the only choice if you have forgotten the Google security issue or your Gmail account password and username.

Hope you can reset your password instantly. If you have any problem, be sure to comment below.

How to factory reset Xiaomi Redmi?

Sometimes, to a certain extent, you may want to factory reset your Android device. For example, when you were planning to sell your phone to give it to your friends, since you don't need it anymore. Or maybe you just want to taste it like new without having to reinstall its ROM. If so, you can simply do a factory reset yourself, which is easy.

Xiaomi is a popular budget flagship phone with Qualcomm Snapdragon 650 or MediaTek MT6795 Helio X10 (depending on which version you have). The phone is so powerful and really worth the price. In addition to this, it also comes with a 16MP main camera and a 5.5-inch IPS touchscreen display with a pixel density of 403 pixels.

However, there is always the possibility of error during use. However, if something happened and your phone was full, or you found something wrong or bricked. The first thing to do is restart your phone. Doing a Xiaomi factory / hard reset is a first aid that you can transfer to your phone instead of flashing your ROM on Android again.

Below is how to do a factory reset in Xiaomi. But there are a few things you need to know before continuing with the process. Resetting your device will erase all your data, apps, settings, contacts, call history, and more. Therefore, you are strongly advised to make a backup.

Reset steps

Step 1 - First of all, turn off Xiaomi by pressing the power button as usual.

Step 2 - Just as a precaution, remove the SD card and SIM card from the phone.

Step 3 - Boot your phone into recovery mode. Follow these steps: Press the Power and Volume Down (-) buttons together and hold them for a while until you see the Mi icon. Release the buttons as soon as you see this.

Step 4 - Now in recovery mode, select "Wipe Data / Restore Factory Settings". Use the volume up and down buttons to navigate (because the touchscreen doesn't work there). Use the power button to select.

Step 5 - Then just select “Yes” - delete all user data. Confirm the action by pressing the power button.

Step 6 - Sit down and wait for the factory reset process to complete.

Step 7 - After that, boot your device into normal mode by selecting the Reboot System command from the menu.

Step 8 - Your phone will restart normally and you can see that your Xiaomi is restored to factory settings.

Simplified method

There is an easier way to reset your phone, but the one above is more thorough, extensive, and secure. Anyway, you can also try the following: On your phone, go to Settings> Backup & reset> Factory data reset> Reset phone> and then finally select Erase everything.

Ready! It was easy, wasn't it? Feel free to leave comments in the section below and subscribe to our group in contact with... Anyway, you can also use the same methods above for Xiaomi reset.

Guide to Xiaomi reset security password on smartphones

Ask Google security question to reset the security lock password (screen unlock screen) of Xiaomi smartphones. Xiaomi has unveiled its own Mi Ai Speaker.

To do this, make sure you have an Internet connection.

Using a primary google account for Xiaomi reset security password

This reset method only works on Android devices. You can reset your password (pattern) using your Google account. Internet connection is a mandatory password reset. The new Xiaomi Mi 5X was recently announced.

Xiaomi reset screen lock using search device

A special method is only available for users of Xiaomi smartphones to reset the security password and other type of secure code. But first make sure you have a Mi Cloud account.

How to factory reset Xiaomi phone without entering Mi password?

Since Xiaomi phones run on their own Android user interface, it is necessary to enter Mi Password during a factory / soft reset. But there are many users who have forgotten their password and thus were unable to perform a factory reset. These users do not need to worry, as here we have an easy way to perform a factory reset on any Xiaomi phone without entering the Mi password.

You just need to boot your device into recovery mode and then erase all data. It is a simple process that every MIUI 7/8 phone user can follow.

A factory reset on any Mi & Redmi phone will erase all data and settings. Therefore, a backup is required before performing the action. MIUI phones are also available for Android 7.0 Nougat update.

1. Turn off the device by long pressing the power button.

2. Once the device turns off completely, press and hold the Power + Volume buttons together until the Mi icon appears on the screen.

3. Now use the volume button to navigate to the "Russian" option and then press the "Power" button to select.

4. Tap Clear & Reset> Wipe All Data.

5. Confirm the deletion of the data by selecting "Yes".

6. After that, you need to return to the main recovery menu and select "Restart".

As a rule, after some time, Android users (Miui 8) notice that the smartphone has begun to work worse - periodic crashes, freezes, boot errors and other unpleasant moments interfere with the normal operation of the device. Anyone who has already reset the settings to factory settings on their smartphone knows that this is an effective way to solve many problems in the operation of the device. For those who want to fix these problems on their own, without carrying the phone to a service center, there is a Xiaomi reset, or Hard Reset. It is also used when they want to reflash the phone or clean it before selling it.

There are several options for how to reset the settings on Xiaomi, but they do not work on all devices. For example, with Android Xiaomi Mi 5, reset is impossible, since the bootloader is blocked in it.

How to reset the settings in an easy way

For such cases, there is a simple method for resetting to factory settings. To do this, you need to open the settings, find the "Restore and reset" item there, then "Reset settings" and delete the data.

If you take another smartphone - for example, Xiaomi Redmi 4 (Xiaomi Redmi 4), then you can make a Hard Reset in any convenient way, since the bootloader is unlocked here, which allows you to penetrate very deeply into the parameters of the gadget. Here, the main condition will be the operation of the selected mobile device based on the Qualcomm processor.

Give gifts

Hard reset Xiaomi through recovery mode

It is very easy to do a factory reset via recovery mode. For this:

1. We remove the SD card and SIM card. We turn off the smartphone.
2. At the same time, we hold down the on / off key and the volume key up, and hold it until the Xiaomi logo appears on the screen.
3. We select English (the system does not support Russian), and then confirm this action with the power button.
4. In the menu that appears, select "Wipe and Reset", and then - "Wipe All Data". We confirm the choice by clicking on "Yes". This action will completely delete all user data.
5. We are waiting for the complete cleaning of the phone to complete. Important! Very often the process reaches 98% and is delayed at this point for a long time. Don't worry - your phone isn't frozen, just wait 100%.
6. Ready. Now restart your phone, it will be clean as if it had just been brought from the store.

How to Hard Reset via Third Party Recovery

This method will help to return the settings to the factory settings in the event that a custom firmware was installed, and your recovery menu differs from the standard one, as a result of which the previous method will not work for you. In all third-party recovery menus, the algorithm is similar:

1. Turn off the phone by first pulling out the SIM card and SD memory card.
2. We hold down the volume and power buttons, thereby going into the recovery menu.
3. The language is already set by default (eng), so without selecting it, click on "Wipe all user data". We confirm the choice.
4. After the end of the process, select the items "Wipe cash" and "Wipe Dalvic". If there is only one of two items in the menu, select it.
5. We reboot the smartphone by selecting "Reboot System Now".

Now you know how to reset your Xiaomi smartphone. The main thing to do before starting the operation is to make sure that all user data from the phone is saved to an external medium (computer or SD card). After such a hard cleaning, it will be impossible to recover the data.

Xiaomi Mi4i runs under the operating system Android 4.4... Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root-rights on Xiaomi

Root on Xiaomi Mi4i

How to get the root for Xiaomi Mi4i see instructions below.

Below are the universal programs for obtaining root rights for devices on Qualcomm Snapdragon

• (PC needed)
• (Route using a PC)
• (popular)
• (root in one click)

If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Specifications

1. Type: Smartphone
2. Operating system: Android 4.4
3. Case type: classic
4. Control: touch buttons
5. SIM card type: micro SIM
6. Number of SIM-cards: 2
7. Multiple SIM mode: alternate
8. Weight: 149g
9. Dimensions (WxHxT): 69.6x138.1x7.8 mm
10. Screen type: color IPS, 16.78 million colors, touch
11. Touchscreen type: multitouch, capacitive
12. Diagonal: 5 inches.
13. Image size: 1920x1080
14. Pixels Per Inch (PPI): 441
15. Automatic screen rotation: yes
16. Scratch-resistant glass: yes
17. Ringtone type: polyphonic, MP3 ringtones
18. Vibration alert: yes
19. Camera: 13 million pixels, LED flash
20. Camera functions: autofocus
21. Aperture: F / 2
22. Video recording: yes
23. Max. video resolution: 1920x1080
24. Max. video frame rate: 30 frames / s
25. Geo Tagging: yes
26. Front camera: yes, 5 million pixels
27. Video Playback: MP4, DivX, XviD, WMV, H.264, H.263
28. Audio: MP3, FM radio
29. Dictaphone: yes
30. Headphone jack: 3.5mm
31. Video Output: MHL
32. Standard: GSM 900/1800/1900, 3G, LTE
33. Support for LTE bands: FDD-LTE: bands B3, B7; TD-LTE: bands B38, B39, B40, B41
34. Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA
35. Interfaces: Wi-Fi 802.11ac, Wi-Fi Direct, Bluetooth 4.1, USB
36. USB charging: yes
37. USB-host: yes
38. Satellite navigation: GPS / GLONASS
39. A-GPS system: yes
40. Protocol support: POP / SMTP, IMAP4, HTML
41. Processor: Qualcomm Snapdragon 801, 1700 MHz
42. Number of processor cores: 8
43. Video processor: Adreno 330
44. Built-in memory: 16 GB
45. RAM: 2 GB
46. Memory card slot: none
47. Additional SMS functions: text input with dictionary
48. MMS: yes
49. Battery type: Li-Ion
50. Battery capacity: 3120mAh
51. Battery: Non-removable
52. A2DP profile: yes
53. Sensors: illumination, proximity, gyroscope, compass
54. Book search: yes
55. Exchange between SIM-card and internal memory: yes
56. Organizer: alarm clock, calculator, task planner
57. Features: LTE support depends on device modification and mobile operator.
58. Date announced

»

Firmware for Xiaomi Mi4i

Official firmware Android 4.4 [stock ROM file] -
Xiaomi custom firmware -

Xiaomi Mi4i firmware can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review for 4-10 lines about the smartphone in the subject line, this is important. The official Xiaomi website, unfortunately, will not help solve this problem, but we will solve it for free. This Xiaomi model has on board Qualcomm Snapdragon 801, 1700 MHz, respectively, there are such flashing methods:

1. Recovery - flashing directly on the device
2. A special utility from the manufacturer, or

We recommend the first method.

What custom firmware are there?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek's

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK (MoKee)
4. FlymeOS
5. Bliss
6. crDroid
7. Illusion ROMS
8. Pacman ROM

Problems and disadvantages of a smartphone from Xiaomi and how to fix them?

• If Mi4i does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
• If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
• Doesn't charge (usually iron problems)
• Doesn't see the SIM card (SIM card)
• The camera does not work (mostly hardware problems)
• Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.