What to do if Cydia crashes? Cydia not working? What can you do? Why won't cydia ios 10 open.

Last week. The jailbreak works quite well, although, as always, it was not without its problems.

Some users complain that they cannot launch Cydia after successfully jailbreaking their device with Pangu. Cydia won't open or crash right away, making it impossible to work with it and install tweaks.

If you encounter something like this, try repeating the following steps to make the problem go away:

Comment. Please be patient as it will be necessary to reset the device to factory settings and restore it from an iTunes backup.

  • If you have encrypted backups configured, disable this setting and make a full unencrypted backup of your device via iTunes.
  • Place the device in DFU-mod.
    • Connect it to your computer.
    • Turn off the device by holding down the Power button and swiping on the slide.
    • Hold Power for 3 seconds.
    • Without releasing Power, hold down Home for 10 seconds.
    • Release Power while continuing to hold Home until you see a pop-up from iTunes, notifying you to enter recovery mode.
  • iTunes will tell you the device is in recovery mode. Press Restore iPhone ... to start the restore process to iOS 9.0.2.
  • When the process starts, select the option to restore the device as new. Do not use backup yet.
  • Jailbreak your device with Pangu.
  • This is a very important step. Before starting Cydia, make sure that “Airplane Mode” is turned off and that your iOS device is connected to the Internet.
  • Launch Cydia and let it load completely. Don't click on Home. When Cydia boots up, the device will automatically restart.
  • Now log into iTunes on your device and restore from the backup.

Everything. Cydia should now work without errors.

Cydia crash after installing tweak

There are reports of issues with Cydia after installing the tweak. If you can't open Cydia after installing a tweak, try the volume up key trick. Namely:

  • Press and hold on Power until the shutdown slider appears.
  • Swipe on the slide to turn off your device.
  • Now press and hold the volume up key.
  • Start the device by clicking on Power.

As a result, all Substrate tweaks will be disabled, including the one that caused the problem, and Cydia should start normally. Remove the problematic tweak (or recently installed tweaks) to avoid repeating the error. After the tweak is removed, do not forget to restart your device so that you can use the tweaks again.

Don't miss the Apple news - subscribe to our Telegram channel, as well as to YouTube channel.

If you belong to the jailbreak community and prefer standard capabilities iOS tweaks from Cydia, you probably already know about the release of a new application for jailbreak iOS 9.2 — 9.3.3 from the Pangu team. However, this exploit is somewhat different from the previous ones.

All jailbreak tools previously released by hackers of various generations were conventionally divided into two categories - tethered and untethered. The former required connecting the device to a computer and re-jailbreaking after each reboot, while the latter allowed the system to be hacked once and for all. The new version of Pangu for iOS 9.2 - iOS 9.3.3 is a kind of hybrid - the jailbreak must be activated after iPhone or iPad respring (otherwise Cydia will crash), but this can be done without using a PC.

UPDATE!

V this moment Apple has blocked the ability to install the Pangu app via Safari browser by revoking the corresponding corporate certificate. The Totoa team does not advise users to reboot their devices and promises to fix the problem. To those who have already produced jailbreak iOS 9.2 -9.3.3 via Safari, we recommend jailbreaking by connecting the device to a Windows PC using.

If Cydia crashes after jailbreak iOS 9.2 - iOS 9.3.3, do the following

Video instruction:

1 ... Launch the Pangu app from the iDevice desktop;


2 ... Allow him to send notifications (if such a request appears);

3. Tap the circle in the center of the screen.

5 ... Wait for the text to appear (in Chinese) and lock the gadget (press once) with the "Power" button;


4 ... Ignore incoming notifications. Just wait about 30 seconds;


5 ... After an automatic reboot of the device (often there are two of them at once with an interval of 10-15 seconds) Cydia will work correctly again.

Probably, this inconvenience will have to endure until the exit, the work on the jailbreak of which, according to the assurances of the Pangu team, is in full swing.

Jailbreak for Apple devices with iOS 9. A utility called Pangu9 debuted four months after the company made iOS 9 available to developers. As in the case of "jailbreak" under previous iOS, to create it, the authors needed to find a vulnerability in a new software platform Apple.

Gray button "Start"

It's not even entirely a mistake. Pangu does not allow you to start hacking your gadget. In this case, the recommendation is as follows: disconnect from iPhone computer or iPad, install the latest iTunes version, connect your device to PC and jailbreak again. You can download the latest version of iTunes here.

Installed iOS Public Beta Profile message

Installed iOS Public Beta Profile "means that Apple profiles installed as part of beta testing have been found on the device operating systems... Go to General device settings and delete installed profiles... After that, jailbreak iOS 9 again.

Cydia does not appear

If the iOS 9 jailbreak passed without errors, but the Cydia icon did not appear on the home screen of the device, then you should not panic. The tip is simple: launch the native iOS Photos app before opening the new Pangu app. Now close Photos, launch Pangu app and allow access to photos. The Cydia icon will then appear on the home screen.

Cydia won't start

Everything seemed to be in order: there were no errors, and Cydia was in place. But when you try to open the store, the application crashes. In this case, the only solution is to perform a factory reset from Settings -> General -> Reset -> Erase Content and Settings. After that, you need to make a "clean" iOS installation 9.0.2. Before proceeding, do not forget to do backup all data on the device.

Tweak settings are missing

Currently, the jailbreak tweak PreferenceLoader, which is responsible for configuring tweaks in the settings, has not been updated to support iOS 9. This means that options for many tweaks may not appear in standard application Settings. For this reason, many add-ons do not work in iOS 9. This problem cannot be solved in any way, it remains to wait for the release new version PreferenceLoader. The developer is already preparing an update.

Only yesterday we talked about that, by personal example, and today we will talk about the errors of Pangu 9 and problems with Cydia. If in the process of jailbreaking iOS 9.0, 9.0.1 and 9.0.2 you have errors in Pangu, Cydia does not appear or does not start (crashes to “Preparing file system"), Welcome to cat.

1. Updating iOS 9 "over the air" (via Wi-Fi)

In this case:


2. "Runtime Error" error when starting Pangu 9

If you get the error "Microsoft Visual C


3. Error Pangu 9 "Error occured in preparing of the enviroment, Error code - 0A" by 45%

If the jailbreak process stops at 45% and Pangu 9 shows the error "Error occured in preparing of the enviroment, Error code - 0A", most likely you have encrypted backups enabled in iTunes.


4. The "Start" button in Pangu 9 is not active.

This problem occurs when Pangu 9 does not recognize the connected device. On the face of the problem with connecting the device to the computer: either with a USB cable or with the drivers supplied with iTunes.


5. Error Pangu 9 "Installed iOS Public Beta Profile".

This happens when your iPhone / iPad is configured with the "iOS Public Beta Profile" and you are participating in the iOS beta testing program. This profile must be deleted: "Settings -> General -> Profiles", select the appropriate profile and delete it.

6. After jailbreak iOS 9 on iPhone / iPad Cydia does not appear

If Pangu successfully jailbreak and did not encounter any errors, but after the last reboot, the Cydia icon did not appear on the iPhone / iPad desktop, but Pangu is still displayed instead, launch the stock Photos app. Then launch the Pangu app on the iPhone again and allow the program to access Photos.

7. Cydia does not start ("crashes" on "Preparing the file system")

If, after numerous attempts to launch Cydia, the program crashes while preparing the file system, there is nothing left but how to set it up as new and try jailbreak again.

8. Cydia error "/ usr / libexec / cydia / cydo returned an error code (2)".

I had one after a seemingly successful jailbreak, but instead of Cydia, my iPhone 5s still displayed Pangu on my desktop.

Cydia appeared after erasing content and settings, but after each program launch, a red error message appeared: "/ usr / libexec / cydia / cydo returned an error code (2)".

To correct given error it is possible only if you restore the iPhone / iPad in iTunes (erasing content and settings does not help) and jailbreak it again.

9. Application settings from Cydia do not appear

It's all to blame for PreferenceLoader - a small utility that allows you to integrate program settings from Cydia into the standard iOS Settings. At the time of the release of Pangu 9 this utility did not support iOS 9, therefore, access application settings from Cydia from iOS settings it was not possible.

The issue with the PreferenceLoader has been fixed for now. The utility has been updated.

As you can see, Pangu 9 errors and problems with Cydia that appear after jailbreak are not critical and can be easily resolved. In most cases, if the jailbreak is unsuccessful, you need to restore the iPhone / iPad in iTunes, set it up as a new device and try to jailbreak it again with factory settings.

Do not forget before restoring so that after flashing the data can be.

SIMILAR ARTICLES