Each user needs to be able to work with autoload, because it will allow you to choose which programs will be launched when the system starts working. Thus, you will be able to more competently manage the resources of your computer. But due to the fact that the Windows 8 system, unlike all previous versions, uses a completely new and unusual interface, many do not know how to use this opportunity.
If your system boots for a long time, then the problem may be that too many are launched along with the OS. additional programs... But you can see which software interferes with the operation of the system, using special software or standard system tools... There are quite a few ways to set up autoplay in Windows 8, we will look at the most practical and effective ones.
Method 1: CCleaner
One of the most famous and truly convenient programs to control autostart is. It is perfect free program to clean up the system, with which you can not only configure the startup of programs, but also clear the register, delete residual and temporary files, and much more. SyCliner combines many functions, including a tool for managing startup.
Just run the program and in the tab "Service" select an item. Here you will see a list of all software products and their condition. In order to enable or disable autorun, click on the required program and use the control buttons on the right to change its state.
Method 2: Anvir Task Manager
Another equally powerful tool for managing startup (and not only) is. This product can completely replace "Task Manager", but at the same time it also performs the functions of antivirus, firewall and some more, which you will not find a replacement for among the standard tools.
To open "Startup", click on the corresponding item in the menu bar. A window will open in which you will see all the software installed on your PC. In order to enable or disable the autorun of any program, respectively, check or uncheck the checkbox next to it.
Method 3: Standard system tools
As we said, there is also standard means to control the startup of programs, as well as several additional methods to configure startup without additional software. Let's consider the most popular and interesting ones.
Startup items are programs, shortcuts, drivers that are automatically loaded when the user turns on the computer and logs on to Windows. As you know, some programs are automatically added to startup during installation. Each startup program increases the system boot time, i.e. the amount of time it takes for you to get started. The more such programs and the more resource-demanding they are, the more significant the time spent will be. In addition to affecting the boot speed of the computer, this software also consumes the hardware resources of the computer - mainly, RAM, which can also affect the performance of the system during operation. This article will discuss several ways to manage startup in the operating room. Windows system 8, Windows 8.1.
■ Using Windows Task Manager
Using the Task Manager is the most common way to manage startup.
To open the task manager press the keyboard shortcut Win + X and in the appeared context menu select item Task Manager.
Also you can open Task Manager by pressing the keyboard shortcut Ctrl + ⇑Shift + Esc
In the Task Manager window, go to the tab.
and by selecting this or that program, you can see its state in autorun (Enabled or Disabled) and change it using the button at the bottom right, or by right-clicking on the program you need and select the appropriate item in the context menu.■ Using the startup folder
Adding or removing items to startup for a specific user.
The folder is located at:
Quote
C: \ Users \ username \ AppData \ Roaming \ Microsoft \ Windows \ Start Menu \ Programs \ Startup
for quick access it is convenient to use the command
Quote
shell: startup
Execute or right in the address bar Explorer.
In this folder, you can add or remove shortcuts for any programs that you want to have at startup.
The shortcuts for the programs you have added will be automatically loaded when you turn on your computer.
If you remove programs from the startup folder, they will be considered disabled.
You can add as many shortcuts as you like, but keep in mind that adding a lot of shortcuts to programs can slow down your computer's initial boot.
Add or remove startup items for all users.
To add or remove shortcuts to programs for all users, your Account should have administrative rights.
If you need to required program loaded at system startup for all users, and not only for the current one, its shortcut must be placed in the folder:
Quote
C: \ ProgramData \ Microsoft \ Windows \ Start Menu \ Programs \ StartUp
For a quick jump, you can use the command
Quote
shell: Common Startup
The command can be entered in the dialog box Execute or in the address bar Explorer.
You can add shortcuts to programs in this folder, or delete existing shortcuts to enable or disable the corresponding programs.
■ Adding a program to autorun through an entry in the registry.
In order to add a program to autorun through an entry in the registry, you need to use the registry editor ( regedit.exe) open a branch
Quote
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Run
create in it String parameter with the name corresponding to the name of the program, and specify the full path to the executable file as the value.
For all users, this parameter needs to be created in this thread:
Quote
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Run
■ Adding a program to autorun using the Windows Task Scheduler utility
In order to add a program to startup, you can use and Task Scheduler (taskschd.msc).
To open Task Scheduler press the keyboard shortcut Win + R and in the Run dialog box that opens, enter taskschd.msc
In the opened window Task Scheduler press the button on the right Create simple task…
Win 8 startup is a hidden and secret folder that most users cannot find. The main problem is that this operating system is very different from the previous ones. If the seven was in many ways similar to XP, then the eight is not alike in any way. This is a completely new platform that both gives the user a lot of advantages and takes away the usual management of their programs.
We provide instructions that will tell you in detail how to view and find startup in Windows 8. Where is this coveted folder hidden? After all, in previous operating systems, everything was very simple. And now this process has become more complicated, the user simply cannot find the desired icon. Relax, the search is not difficult and when you understand what's what, then make sure once again - Windows 8 is an excellent system.
Windows 8: Startup and Search
For those who are looking for this folder just like that, we will tell you - the main problem is that during installation, many utilities start running along with the computer. It wastes energy operating system, they have to be turned off every time. windows 8 startup programs in this case is an ideal option, in just a couple of seconds you can turn off those programs that are not needed or are rarely used.
To find the system folder called "Startup", you need to go to the start menu. Next, we need the following address - C: \ Users \ Username \ AppData \ Roaming \ Microsoft \ Windows \ Start Menu \ Programs \ Startup. It is there that is always located system folder startup.
To speed up the process of getting into the folder, the developers have created a faster way. Hold down the Win + R keys, then write or paste shell: startup. Click next and find yourself in the program autorun folder. Now you can easily turn off all programs you don't need during system startup. This will significantly reduce the uptime in the future, as well as speed up the uptime of the system itself.
By the way, very often gamers who play games with innovative graphics are looking for autoloading. In order for nothing to freeze, you need to use all the resources of the computer. But a large number of programs picks them up. Therefore, the autorun folder is the only way out in this case.
Hello. I'm on vacation here for a bit, so I decided to write some new articles. And today we will look at a rather interesting topic, namely, adding sites to the list for automatic start at the start of the operating system. In fact, individually, each of the presented methods will be simple, but I decided to combine all the methods I know of in one article. As usual, only the means of the operating system itself.
Methods:
Now consider the methods listed.
Method number 1. Adding a program shortcut to the autorun folder.
This method comes first, since it is the simplest of all presented and in most cases it will be more than enough. To do this, you need to do just a couple of actions:
1) Click on the executable file of the program. And in the context menu, select "Create shortcut". The resulting shortcut is cut from the current location. You can also just copy the shortcut from the desktop, if available.
2) Next, we need to transfer (copy) it to the folder, which folder you choose. If you want this program to be loaded only for your user, then open the explorer and paste it into the address bar:
% USERPROFILE% \ AppData \ Roaming \ Microsoft \ Windows \ Start Menu \ Programs \ Startup
If you want the program to run for all users, then add to the folder:
C: \ ProgramData \ Microsoft \ Windows \ Start Menu \ Programs \ StartUp
That's it, after these steps the program will automatically start at system startup.
Method number 2. Adding a program to autorun through an entry in the registry.
1), for this we press the key combination Win + R and enter regedit.
2) There are also two options for the development of the event:
a) For the user only, open the branch:
HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Run
b) For all users, open the branch:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Run
3) Right-click on an empty space on the right side of the window and select "New" - "String parameter".
4) Set the name corresponding to the name of the program and double-click on it to open the properties and set the value. In the "value" we specify the full path to the executable file of the program. It can be taken from the properties of the desktop shortcut or the executable file itself.
Method number 3. Adding programs to autorun using the Windows Task Scheduler utility.
Yes, in OS Microsoft Windows there is a built-in utility for adding programs and not only to autorun. Moreover, with a very big amount settings.
1) Open the "Task Scheduler". You can open Control Panel - System and Security - Administrative Tools and here already select it from the list. Or press the Win + R keyboard shortcut and type taskschd.msc. The following window will open.
2) Click on the right button "Create a simple task ...". The "Create Wizard simple task"(Where in Microsoft without creation wizards;). We enter the name of our task and, if necessary, give a couple of lines of description. And press the button "next".
Many programs add themselves to startup during installation. At the same time, they start to run every time you log on to the system. This may not be very useful, because immediately after launch they may not be needed, but they give the OS a load, and this can seriously slow down both the launch of the system itself and many necessary utilities... The opposite situation also happens, the user wants some utility to be immediately launched upon logging into the system in order to immediately start using it, in which case it can be added to startup. This article will show you how to do this.
How to add applications to startup and where is it located
This section will describe in detail how to add programs to startup, you can do this in several ways.
Start Menu
In order to find the desired directory, you should go to start, open the computer, and then go along the path C: \ Users \ UserName \ AppData \ Roaming \ Microsoft \ Windows \ Start Menu \ Programs \ Startup.
This folder is responsible for only one specific user, under whose record they are now working. You can drag the shortcuts of any utilities here, then they will start running at system startup, however, do not add a lot at once, this can lead to brakes and a long load. To add an application to autorun for all users at once, you must have administrator rights.
Labels, in this case, should be placed in the directory C: \ ProgramData \ Microsoft \ Windows \ Start Menu \ Programs \ StartUp.
In this case, the user will first need to open Task Manager(Ctrl + Shift + Esc) and then go to the tab. 
The programs themselves cannot be added here. However, those that are already on the list can be turned off and on. Disabled, will not load on computer startup. To enable or disable them, just right-click on the application you want and select the appropriate item.
Windows 8 Registry
In this case, first you should run the utility to edit the registry, you can do this by pressing win + r and writing in the window that opens regedit... Then you need to go along the way HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Run... In the section that appears, you will need to create a string parameter, and specify the full path to the utility file as its value. 
Task Scheduler
To open this program, you need to press win + r and enter taskschd.msc... In the right part of the window, you will need to click on Create a simple task. 
Then it remains to enter the name, it can be anything, the main thing is that later the user himself does not get confused in them. Next, you need to mark the section when starting the computer. 
In the next section, the first item should be noted " Run the program", And in the next you will need to click on the overview and specify the path to the application. 
Startup management programs
This section will provide several programs that can help the user to manage startup in windows 8.1.
Microsoft Sysinternals Autoruns
This application will check all available locations and find all utilities that start automatically. In it, the user will be able to add or remove utilities, detailed instructions, as well as the program itself are located at the link https://technet.microsoft.com/ru-ru/sysinternals/bb963902.aspx 
CCleaner
This utility has many functions, with its help the user can get rid of unnecessary garbage in the system, as well as check the registry for errors. The function is also available here application management in startup, you can download it from the official website https://www.ccleaner.com 
The required item is located in the service - startup section, here you can enable or disable programs, as well as remove them from the list.
TuneUp Utilities
Download trial version utilities can be found at https://www.avg.com/en-us/tuneup-utilities. With its help, the user will be able to optimize and customize the operation of the computer. 
The necessary section is located just in the system optimization, there you can select Increase performance - TuneUp Startup Manager.
AusLogics BoostSpeed
Another utility for configuring and optimizing your computer, which allows manage startup... You can download it from the page https://www.auslogics.com/ru/software/boost-speed/ 
The required tool is located in the Tools - Software Control / Autostart section - uncheck or check the box.
Glary utilities
Download this useful program can be from the page https://www.glarysoft.com/ 
It will allow you to check the OS for errors and tune its work. The startup management tool is located in Modules - Optimization - Startup Manager.
AnVir Task Manager
This program will allow you not only to manage autorun, but also to set the start time of the utilities. So you can start the application not immediately, but a few minutes after logging in, which can be much more convenient, you can download it from the link https://www.anvir.net/ 
What applications can be removed from startup
In autorun, you should leave only system programs , as well as those that may be immediately required for work. It is better to start all the rest on your own, at the time in which they are needed. This will reduce the load on the OS and it will start working faster.
