Router TP link setting 3420 firmware. TP-Link TL-MR3420

First, let's look at the general view of the connection:

1 Connect the Ethernet cable of the provider (if you will use a WAN connection)

2 Connect your computer / laptop to any LAN port (there are 4 of them) using an Ethernet cable (included).

3 Connect a 3G / 4G modem (if you will be using a 3G / 4G connection).

4 Plug the power adapter into the socket of the TL-MR3420.

5 Press the ON / OFF button to turn on the TP-Link MR3220 Router.

Indicator - Power
Does not burn
TP-Link MR3420 is off.
Is burning
Meals included.

Indicator - System

Is burning
The router is loading.
Flashing
The router is in working mode.
Does not burn
The presence of a system error

Indicator - Wireless Wi-Fi
Does not burn
Wi-Fi is off.
Is burning
Wi-Fi is on.

WAN, LAN ports 1-4 Connect to network connectors
Does not burn
The cable is not connected to the corresponding connector of the Keenetic, or the network connection is not established.
Lights up or flashes
The network connection has been established, information is being transferred.

Indicator - USB port

Is burning
3G / 4G USB modem is connected, but data transfer is not in progress.
Flashing
Information is transmitted via 3G / 4G modem.
Does not burn
3G / 4G USB modem is not connected.

Indicator - WPS
Flashing slowly
The wireless device is connecting to the network. This process will take about 2 minutes.
Is burning
The wireless device has been successfully added to the network.
Flashing fast
The device was not connected to the network.
Does not burn
The WPS function is disabled.

In order to configure the TL-MR3420, you need to change the network settings on the computer / laptop to automatic retrieval of network settings ... After that, on a computer / laptop, open any browser (IE, Chrome, Firefox, Opera) and enter the IP address of the router in the address bar 192.168.0.1 ... Next, you need to enter a username and password, by default the username is admin, the password is admin.

TP-Link MR3420 firmware update.

For a more stable and safe work the TP-Link MR3420 router, the first step is to update the firmware. To do this, in the Status window, look at the hardware version and the version of the installed firmware.

After that, on a computer / laptop with Internet access, go to the site TP-Link select the hardware version (in this example V2) and download the latest firmware for it.

Attention!!! It is necessary to download the firmware specifically for your hardware version. Incorrectly selected firmware can damage your device.

Unzip the downloaded archive. As a result, you should have a folder with a file with the extension .bin.

Then on the web interface of the router go "System Tools" - "Firmware Update"... Then press the button "Overview", select the folder with the downloaded firmware archive and press "Refresh".

Attention!!! Do not turn off the router or computer / laptop during the firmware update, as this may damage the network device.

In the confirmation window, click "OK".

During the TP-Link TL-MR3420 firmware update, the rotor will reboot. After loading, in the status window you will see new version firmware.

Configuring the Internet on the TP-Link TL-MR3420 router.

After updating the firmware, you can start setting up the Internet. To do this, on the web interface in the menu, select "Network" - "Internet access"... Next, you need to decide which of the 4 modes you will use. Choose which mode suits you and press "Save".

If the mode you have chosen implies the presence of a 3G / 4G modem, you need to go to the menu "Network" - "3G / 4G"... Select Region and Service Provider mobile internet a. Don't forget to press the button " Save".

Then, if you are using an Ethernet connection, go to the menu "Network" - "WAN" in the line "WAN connection type" select the type of connection, you can check it with the provider, then, if necessary, enter the login and password data of the provider. At the end of the settings, click "Save".


Configuring a Wi-Fi network on the TP-Link MR3420 router.

The next step is to start configuring Wi-Fi on the TL-MR3420 router. It is worth noting that according to default wifi the network is configured and you can find the login and password for it on a sticker on the router.

If you want to change the network name (SSID) or password, you need to go to the web interface, select "Wireless Mode" - "Wireless Mode Setting".. If you want to get a more stable Wi-Fi network, I recommend that you define a free channel and indicate it in the "Channel" line, in more detail how to do this in the article How to select / change the wireless channel on the router / router ... Save your changes.

To change the password for the Wi-Fi network, go to "Wireless" - "Wireless Security"... For the safest using Wi-Fi network authentication type I recommend choosing WPA-PSK / WPA2-PSK... Next, in the PSK Password line, enter the password for connecting to the Wi-Fi network. I recommend using a complex password - at least 8 characters with letters, numbers and specials. signs (! # $). Save the settings.

Router Tp-Link TL-MR3420 is a router supporting 3G / 4G networks with data transfer rates up to 300 Mbps.

Features of the tp link tl mr3420 router

The technical characteristics of this model for its relatively low price - the recommended cost of the router is only 1600 rubles - are worthy of praise.

Details of the characteristics of the tp link tl mr3420 model can be found in the following illustrations:


In addition, the TL-MR3420 router is compatible with LTE / HSPA + / HSUPA / HSDPA / UMTS / EVDO USB modems, which is a huge plus at the present time of Internet mobility. A complete list of supported modems is shown in the following illustrations:


Brief overview of the tp link tl mr3420 router

Router TL-MR3420 is equipped with 2 transmit / receive antennas.

On the front side of the case there is an indicator panel, which consists of 10 elements:

  • "Nutrition";
  • "System" - an inactive indicator indicates a possible system failure;
  • "WLAN" - when the indicator blinks, the function wireless transmission data is active;
  • "WAN" and "LAN 1-4" - when the indicator blinks, a device that is active at the moment is connected to the port;
  • "USB" - if the indicator is "on", then the usb modem is connected, but inactive, if it blinks - data is being transferred;
  • "WPS" - informs about the status of devices connected to wireless network by using . After successful connection, within 5 minutes, the indicator will turn off.

The rear panel contains connectors and ports for connecting external devices:

  • "Power" - to connect the power supply;
  • "ON / OFF" - a button to enable / disable (reboot) the router;
  • "LAN 4-1" - ports for connecting network devices;
  • "WAN" - port for connecting to the Internet line;
  • "WPS / RESET" - a button to activate "WPS" (just press) and reset the settings to factory settings (press and hold for more than 5 seconds).

The side panel of the router contains:

How to connect tp link tl mr3420 router?

Before proceeding with the installation and connection of the router, make sure that it matches the necessary requirements for the correct operation of the equipment:

  • there should be no heating elements in the immediate vicinity of the router;
  • possible electromagnetic interference must be minimized;
  • humidity within 10% ~ 90%.

If the requirements are met, then:

  • install the router in the chosen place, while not connecting it to the mains;
  • connect the provider's cable ("WAN" port) or USB modem and computer ("LAN" port) to it;
  • plug the router into the network and press the "ON / OFF" button.

To further configure the router follows.

How do I set up an internet connection?

To enter the web interface of the TL-MR3420 router, use the address 192.168.0.1, which must be entered in the address bar of any Internet browser (by default, the login and password will be “admin”).

To set up an Internet connection, you will need the authorization data specified by the provider in the agreement for the provision of Internet access.

The web interface consists of 15 main sections.

To create a new connection, open "Network" then the menu "Internet access" and select one of the options here:

  • "3G / 4G only";
  • "Preferably 3G / 4G";
  • "WAN preferred";
  • "WAN only".

Depending on the specified type of connection, select one of the menu items "3G / 4G" or "WAN":

"3G / 4G"

  • upon successful connection and definition usb modem the first line will show "Successfully defined";
    then select the region and service provider;
  • choose one of three connection modes;
  • Select Authentication Type Auto (unless operator requires PAP or CHAP).

Now click on the button " Additional settings»

  • if you know the dial-up number, apn, username and password - specify them in the fields of the same name;
  • if necessary, you can specify the preferred "DNS" servers.

If the modem is not identified, then you will first need to download a file with the extension .bin (you can find it on the website http://www.tp-link.com in the "Support" section).

Click "Browse", select the downloaded file and click "Download".

Then restart the router and check the status of the modem definition.

"WAN"

In the first line "Connection type" select one of the options according to the agreement with the provider:

"Dynamic IP"

"Static IP address"

Here you will need to specify the "IP address", "Subnet mask" and "Default gateway".

"PPPoE / PPPoE Russia"

Enter the "Username" and twice the "Password".

If it is possible to implement "Dual Access", select "Dynamic ip" or "Static ip". Specify one of the connection options (the default is "Connect automatically").

To select your preferred "DNS" servers, click "Advanced settings" and enter the required addresses.

"BigPond cable"

In addition to the username and password, specify the "Authentication Server" and "Authentication Domain".

"L2TP / L2TP Russia" or "PPTP / PPTP Russia"


Setting up wifi on a tp link mr3420 router

To configure the wireless network, open the "Wireless mode" section and specify the "Wireless network name" (the rest of the parameters can be left as default).

Go to the "Wireless Security" menu

and select one of the proposed protection modes:

1 "WEP" - you will need to fill in the "Key" line.

2 “WPA WPA2 - Enterprise” - enter “Radius IP address” and “Radius server password”.

3 "WPA-Personal / WPA2-Personal" - enter the password in the line of the same name.

Setting up IpTV

Configuring the operation of a router with a set-top box is carried out in the section "IPTV:

  • "Automatic" - using "IGMP Proxy", LAN ports work unchanged, which provides access to viewing through a wireless and wired connection;
  • "Bridge" - you will need to specify the port number to which the set-top box was connected;
  • 802.1Q Tag VLAN - Specify the VLAN Tag ID and configure port trunking (if required by your service provider).

Additional router features

As additional opportunities it is worth considering the "WDS" setting, i.e. transformation of "TL-MR3420" into:

  • to enable this function, you must put a check mark in the "WDS" line in the "Wireless settings" section;
  • specify "SSID" - this is the name of the access point,;
  • "BSSID" is (or just click on the "Search" button and select an access point from the list);
  • select "Key type" and enter the password by analogy with the existing access point.

Summing up, it is worth saying that "TL-MR3420" is a solid, high-quality router for creating home network with a simple intuitive interface and decent technical characteristics.

Authorization

In order to get into the web interface of the router, you need to open your Internet browser and type 192.168.1.1 in the address bar, Username - admin, Password – admin(provided that the router has factory settings and its IP has not changed).

Changing the factory password

So that no one except you can enter the settings of the router, you need to change the password to enter the settings.

To do this, select on the left in the menu System Tools(System Tools) - Password(Password) and enter the settings:

  1. Previous username: old username, enter admin
  2. Previous password: Old Password, enter admin
  3. New username: enter a new username, you can leave admin
  4. New Password: enter a new password
  5. Confirm new password: confirm new password

Setting up an Internet connection

Go to Network(Network) - Internet access(Internet Access). Here you choose how (by what technology) the connection to the Internet will be carried out:

  • 3G / 4G preferred- Use 3G / 4G as primary connection and WAN as backup connection.
  • WAN preferred- Use WAN as primary connection and 3G / 4G as backup connection.
  • WAN only- Use only WAN to connect to the Internet.
  • 3G / 4G only- Only use 3G / 4G to connect to the Internet.

Configuring 3G / 4G Connections

1. To configure the Internet via USB-modem (3G / 4G) go to Network(Network) - 3G.

  • Region: Russia
  • Mobile Internet Service Provider: Choose your communication partner
  • Connection mode: Connect automatically
  • Authentication type: Auto

2. If your telecom operator is not among the offered, go to Additionally(Advanced Settings). Put a point on " Specify manually Dial number, APN, username and password". Here we enter data from your telecom operator. After entering the settings, click Save(Save).

3. To set up an Internet connection via the WAN port, go to Network(Network) - WAN... Here in the graph WAN connection type(WAN Connection Type) select the type of connection used by your provider.

PPPoE connection setup

  1. In field WAN connection type (WAN Connection Type): select PPPoE / Russia PPPoE
  2. Username
  3. Password ( Confirm the password(Confirm Password)
  4. Secondary connection(Secondary Connection): Disable (Disabled)
  5. WAN connection mode(WAN Connection Mode): Connect automatically(Connect Automatically)
  6. Save(Save). Internet is configured.

Configuring L2TP connection

  1. WAN connection type L2TP / Russia L2TP
  2. Username(User Name): your login by agreement
  3. Password ( Password): your contractual password. In some firmwares, a little lower asks Confirm the password(Confirm Password)
  4. We put a point on Dynamic IP(Dinamic IP)
  5. IP address / Server name
  6. MTU size (bytes)
  7. Connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
  8. After entering the above settings, click Save(Save). Internet is configured.

Configuring PPtP (VPN) when automatically obtaining a local IP address (DHCP)

  1. WAN connection type(WAN Connection Type): Select PPTP / Russia PPTP
  2. Username(User Name): your login by agreement
  3. Password ( Password): your contractual password. In some firmwares, a little lower asks Confirm the password(Confirm Password)
  4. We put a point on Dynamic IP(Dinamic IP)
  5. IP address / Server name(Server IP Address / Name) - server address or name (specified in the contract)
  6. MTU size (bytes)(MTU size) - change the value to 1450 or less
  7. Connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
  8. After entering the above settings, click Save(Save).

Configuring PPtP (VPN) with a static local IP address

  1. WAN connection type(WAN Connection Type): Select PPTP / Russia PPTP
  2. Username(User Name): your login by agreement
  3. Password ( Password): your contractual password. In some firmwares, a little lower asks Confirm the password(Confirm Password)
  4. We choose Static IP(Static IP address)
  5. In the fields IP address / Server name(Server IP Address / Name), IP address(IP Address), Subnet mask(Subnet Mask), Main gate(Gateway) enter data from the contract. In field DNS can enter DNS your provider's address
  6. Connection mode(WAN connection mode) - Connect automatically(Connect Automatically)
  7. After entering the above settings, click Save(Save).

NAT when automatically obtaining an IP address (DHCP)

  1. In the WAN connection type field ( WAN Connection Type): select Dinamic IP(Dynamic IP)
  2. Push Save(Save). Internet is configured.

Setting up Wi-Fi on the router

Configuring Wi-Fi connection... In the side menu go to Wireless mode(Wireless). In the window that opens, enter the following settings:

  1. Field Wireless network name(SSID): enter the name of the wireless network
  2. Region(Region): Russia
  3. Channel (Chanel): Auto
  4. Mode: 11bgn mixed
  5. Channel width(Channel Width): Auto (Automatic)
  6. Enable wireless broadcast and Enable SSID Broadcast- check the boxes
  7. Press the button below Save(Save)

Configuring Wi-Fi encryption... In the side menu, go to Protection Wireless mode (Wireless Security):

  1. Choosing the type of encryption WPA-PSK / WPA2-PSK
  2. Version- Automatically
  3. Encryption- AES
  4. PSK Password: enter the password for Wi-Fi network... Password must be at least 8 characters
  5. Click the Save button at the bottom. After saving the settings, you will be prompted to reboot the router, ignore this requirement (red inscription at the bottom).

Port forwarding / forwarding

This function automatically redirects requests for certain services from the Internet to the corresponding host of your local network located behind firewall router. Use this function follows if you want to create a server on the local network behind the router's firewall (for example, a Web server or mail server). Go to Call forwarding (Forwarding), push Add (Add New).

IP address - network address the device to which the request will be redirected. Service Port and Internal Port- port number to be opened Protocol- Select the required protocol State- Included. Push Save.

Inexpensive, yet highly functional router entry level Is TP-Link TL-MR3420. In addition to the usual 5 RJ-45 ports for connection, it also has one YUSB. The latter is universal: it allows you to connect a 4G / 3G modem to a local area network, external storage or network It is strong and weak sides of this network device and will be discussed in detail in this review.

Router capabilities

Let's start with the specifications of this router. Router TP-Link this model is enough functional device entry level. It is equipped with one input port and 4 output ports for creating a wired segment of home transmission of information for each of them is 100 Mbps. Also, this router is equipped with 2 antennas at once for wireless transmission of information using the "Wi-Fi" technology. Such a constructive solution allows you to make the coverage area larger and increase the transmission speed in this way by 2 times up to 300 Mbit / s. Another important feature of this router is the presence of a YUSB port, which, as noted earlier, is universal. You can connect to it an external network storage device, a 4G / 3G modem, and multifunction device... It is important to keep in mind one point. There are two versions of this model of router. The first of them comes in a "rectangular" case and works only with networks of the 3rd generation, and the second is a stylish, streamlined case and the ability to work in all existing mobile networks today.

Contents of delivery

Compared to competitors, the list of complete documentation for TP-Link TL-MR3420 compares favorably. Reviews highlight the presence of several additional booklets on the network products of this manufacturer, which allow the most optimal selection of equipment for a home network for novice users. In addition to brochures, this list also includes a certificate of conformity, a warranty card and an operating manual. In addition to the router itself, it comes with 2 bendable antennas, a crimped twisted-pair cable, a power supply and a CD with an application software to configure this network device.

Appearance and information content

TP-Link TL-MR3420 looks very stylish. The bottom cover is made of matte plastic and has 2 holes for wall mounting. In turn, the upper part of the case is made of plastic, but only with a glossy finish. Not quite the right decision - dust and dirt will collect on it. Also, LED indication is displayed on the upper edge of the router. There are 10 LEDs in total on this router. The first of these is an indication of the presence of power. If it is on, the power supply is on and the POWER button is in the down position. The second LED is an indication of the operation of the router. If it glows continuously, then loading in progress network device.

The next indicator shows the operation of the wireless segment of the computer network (it should blink continuously when it is on). The next four LEDs indicate the process of communication in the wired section of the network. They are attached to each port from the back. Then comes the indicator of receipt and from the global web. An LED labeled "3G / 4G" indicates wireless network activity. When the last indicator turns on, the search for new network devices starts. In this case, the procedure for establishing communication will be performed with a minimum number of manipulations. On the rear side of the router, four RJ-45 ports are brought out, which are designed to create a wired segment of a computer network. One blue port is used to connect the input cable from the provider. At the edges of the rear side of the router there are slots for installing antennas. Near the right is the reset button, and on the left is the power supply and a socket for installing a pin from the power supply. The YUSB port and the button for fast connection to the local area network are displayed on the left side.

Provider data

Next, you need to find out the values ​​that will be set in the TP-Link TL-MR3420. Tuning without these parameters is simply impossible. All the necessary information can be found in the contract with the provider. First of all, this is the type of connection. The most commonly used for these purposes are L2TP or PPPoE. Also in this document the login and, of course, the password for gaining access to the global web are required. In the case of using a static address, it is also included in this agreement. In general, all the necessary data is often given in this document and must first be clarified so that there are no problems during the setup process.

Scheme for customization

The next step is to assemble a circuit for TP-Link settings TL-MR3420. 3G modem, network MFP or storage device connects to YUSB port... Moreover, according to this interface only one device can be connected. Then we install both complete antennas. Next, we install the power supply into the outlet, and its cord with a connector to the corresponding port of the router. We install the twisted pair cable supplied with the network device with one connector into the yellow port marked "1", and its other end into the laptop socket or personal computer... But the wire from the provider does not need to be connected to the network device at this stage of the setup.

Initial setup

At this stage, the TP-Link TL-MR3420 software configuration is performed. To do this, the computer and the router are turned on using the "POWER" button. Then we wait until the end of loading both the computer and the router. Then we launch any Internet viewer that is on the PC. Then you need to type 192.168.1.1 in its address bar. Next, a request will appear with the fields "Username" and, of course, a password. We take this information from the bottom cover of the router. Typically, the "Username" is "admin". The default password is 12345. But it's better to clarify this information anyway. On the first "Start" window, simply click on the "Next" button. Then you need to select the mode of connecting to the Internet: only wires are used, a 3G modem, preferably a wire connection or a connection using a 3G modem. Set the appropriate checkbox and go, click on "Next" again. The next step is to set the connection parameters. Moreover, both using a wireless modem and using an input twisted pair. All necessary logins and passwords are set, as well as the type of connection. If a static IP address is used, then it must be set along with the mask. All this information, as indicated earlier, is in the contract for the provision of services. The user, at his discretion, can only set the name of the wireless network, the password for accessing it, the type of encryption and select the channel. At the end, it is imperative to save all the changes made. Turn off all equipment and disassemble the circuit.

We transfer the router to a permanent place and connect

Now we select the place where the router will be permanently located. It should be located as close to the center of the apartment or house as possible. This will ensure largest area cover. Also, the lead-in wires from the Internet service provider should be able to reach this point without any problems. Well, in relative proximity there must be a 220V outlet. As soon as the place is chosen, we begin to connect the router according to the previously given method. At the final stage twisted pair from the provider we install in the blue port of the network device. This completes the switching for TP-Link TL-MR3420. In most cases, the firmware does not require updating. Therefore, we check the correctness of the connection and apply voltage to the router.

We set the connection parameters for "Wi-Fi"

This stage is performed on devices running the Android OS. Itself is already configured properly TP-Link TL-MR3420. Setting up the connection of a mobile device is done as follows:

    In the status menu, activate the "Wi-Fi" transmitter.

    We go into the program menu and find the "Wi-Fi" shortcut. We open this utility.

Checking the wired segment of the home network

Now we check how information is transmitted over the wired segment of the local area network TP-Link router TL-MR3420. To do this, it is enough to launch a browser on any computer connected to the network using a twisted pair cable and enter an address, for example, qip.ru. Then press "Enter" and it should open start page of this internet portal.

Wireless Test

The next step is to check the functioning of the wireless segment of the computer network when the PC is connected to it. The TP-Link TL-MR3420 router itself, as noted earlier, is already configured and must be turned on. Next on PC with wireless adapter we go to the network control center. Its shortcut is in the lower left corner of the screen. In the list that opens, we find our network and connect to it, and do not forget to enter the password correctly. Next, close all windows and launch the browser and check, according to the previously stated method, the correctness of the "Wi-Fi" operation when connected from a PC.

SIMILAR ARTICLES