Consider a very important topic for beginners: how to use the update site, as well as download and install 1C distributions. I propose to immediately "rush into battle" and go to practice. Open the site and go to the "Software update" section, or immediately go to the site. If you are prompted for a login and password during the transition, but you do not know where to get this data, you can read the article, or contact your service organization using 1C and request this data there. After going to the update site, a table with available downloads will open. program files... Here you are interested in the sections with the technology platform and the names of your configuration.

The second column of the table shows the version of the latter on this moment release, in the third release date of this release. The remaining columns contain information about upcoming releases.

We install the 1C technological platform

Let's start debriefing from the Technological Platform. At the moment, the current version of the platform with the prefix "8.3". Older versions "8.2" and earlier are no longer supported, "8.4" is still in deep alpha testing. And so, if you have a need to update the platform, then we do the following. Click on the line "Technology platform 8.3". You will be presented with a list of all available versions.

Click on the latest version. A window with distributions for different operating systems will open. Select "Technological platform 1C: Enterprise for Windows".

We press the only line "Download the distribution kit". The download will start. After downloading, unpack the downloaded archive by right-clicking on it (if you do not have WinRAR to unpack, you can use free program ).

In the unpacked folder, run the "setup" file.

The installation wizard will open. Click "Next".

You can leave the list of installed components by default, click "Next" again.

Click "Install" and wait until all the necessary files are installed. The process usually takes a few minutes.

Then you will see a window prompting you to install the protection driver, uncheck this box. Click "Next", then "Finish".

Your technological platform has been updated. You can verify this by going to your base and clicking in the right upper corner badge

The platform version will be displayed at the very top of the window that opens.

Installing update distributions for 1C configuration

Distributions of updates are downloaded and installed according to the same principle as the platform. The only thing is, let's immediately indicate the folder for updates. The fact is that by default updates are installed in custom folder, which is not very convenient. The folder can be named whatever you want and create in any place convenient for you, in our example the path will be "D: \ 1c \ 1c updates". Launch the 1C shortcut on the desktop and click "Settings" on the right.

Click on the green plus sign in the section "Directories of configuration templates and updates" and specify the path to the update folder "D: \ 1c \ 1c updates". After adding, the path will be displayed in the same section. Click "OK".

We have done the preparatory stage, now let's take a look at what updates need to be downloaded. We return to the site and click on the name of your configuration.

Let's analyze it using the example of "Enterprise Accounting 3.0" (of course, you will have the name of your configuration). Click on given line, you will see a list of all available releases.

The growth of the profit of any organization directly depends on the success of the planning of economic activities and the effective work of its employees. At the same time, a good financial result depends not only on reducing the time and effort for the production of a quality product, but also on the correct documentation. Thus, if an enterprise expects an efficient and well-organized activity, then its management should also think about using software that will structure and minimize routine paperwork.

Just for such tasks, the 1C: Enterprise program was developed, the capabilities of which allow you to fully keep records of the economic activities of any full-fledged enterprise

Note: You can download 1C: Enterprise for free from our resource or the official website of the developer. To do this, use the direct links at the bottom of this material. This is a free educational version of the program that you can use, however, with some restrictions.

Thus, having a full-fledged set of accounting programs, you can easily automate many of the processes occurring within the company, and this can be done most efficiently and in the shortest possible time. The platform of the 1C: Enterprise program is as versatile as possible, which allows you to use products created on its basis in a variety of areas.

Description and software capabilities

The latest version of 1C: Enterprise 8.3 software was created taking into account all the previously accumulated experience, which the developers managed to systematize and analyze after the release of version 7.7 (more than six years ago). This confirms the fact that 1C products have not ceased to be recognizable, understandable and user-friendly at any level. computer literacy, - it just now contains an updated set of functions for various tasks, based on fresh innovations in legislation and changing needs of the business sphere. After all, it has long been no secret that some methods of accounting and formation of reporting documents have undergone a qualitative and semantic transformation, which were necessarily taken into account in latest version 8.3.

Composing their new product, the authors of the project relied on the numerous wishes of interested users in order to make the functions of all programs as efficient and optimal as possible in their work. And to assess its capabilities in practice, it is proposed to download 1c Enterprise 8.3 for free in Russian from the developer's official website.

Application area

Apply this program can be used to perform a wide variety of tasks in most commercial enterprises and virtually any budgetary organization. In any case, the software will be equally productive and useful for automating routine accounting processes.
Configuration "Trade Management", which is part of 1C: Enterprise, will help to easily automate many of the financial processes occurring within the organization, for example, to greatly facilitate the planning and analysis of trade operations, to simplify the management and operational accounting.

In such a case, you can also use the extensive capabilities of "1C: Enterprise Management", which facilitates the process of implementing end-to-end management accounting either for all firms that are part of a large company, or for each of them separately.

With it, your employees will be able to easily organize the process of filling out the primary template forms related to business documentation: warehouse, trade and purchasing, production, financial and other types of necessary documents. And also to speed up the registration of business transactions.

Especially among domestic commercial structures, it is in demand updated version software, which is distinguished by a well-thought-out mechanism of work and the versatility of its use within the framework of a variety of organizational forms. With its help, you can almost completely automate the maintenance of not only tax, but also accounting, as well as the natural formation of regulated reporting.

It doesn't matter what your organization specializes in: builds its own production, trades at a wholesale level, or deals with retail sales, provides any services, conducts commission or subcommission trading - in any case, you already have a competent solution for automating reporting, which is called 1C: Enterprise, which can be downloaded for free in Russian.

Additional program features

You can independently adjust the accounting methodology based on the existing framework accounting policies, generate the necessary reports in the necessary sections. In the new version of the program, the process of registering business transactions occurs simultaneously in the required sections of quantitative, analytical and currency accounting types, as well as in the area of ​​accounts accounting... Tax and accounting, even in the free training version of 1C: Enterprise, fully comply with all currently relevant laws.

conclusions: due to its versatility and flexibility, the proposed software will be as effective as possible in a wide variety of applications. It will help you: easily automate the process of carrying out economic and organizational activities, correctly fill out the regulated reporting forms, quickly calculate salaries, control the course of accounting with several charts of accounts at once, conduct arbitrary accounting measurements, simplify the efficiency of managing an organization, make financial analysis processes, overall planning and budgeting of the company more effective.

The last Russian version of 1C: Enterprise 8.3 can be downloaded for free with support for all relevant reporting documents, and its educational version will clearly demonstrate the entire set of possibilities basic version Software, and will also allow you to learn programming for 1C platforms.

Platform 1C: Enterprise 8.3 ➾ If you have a typical (no changes and modifications) configuration of 1C: Enterprise, then it is quite easy to update the platform. This article will help you understand the platform update, ✔ without resorting to the help of a specialist.

This article discusses the most common platform update option (using the example of updating from platform 8.2.19.130 to 8.3.6.2299) - updating the 1C: Appliance platform for Windows on the user's computer, when downloading the update distribution from the user support site.

Download the distribution kit for updating the 1C platform: Pidprisma 8.1, 8.2, 8.3

To update (install) the technological platform, you need to download the update distribution kit. To do this, on the Information Technology Support Portal website, go to the Software Updates page by clicking on the Learn More button in the Software Updates section (Fig. 1).

Picture 1 - home page"Portal of information technology support"

On the 1C: Software update page, click the Download software update button to go to the authorization parameters and enter your username and password (Fig. 2).

How can I find out the current version of the platform?

This can be done as shown in Fig.H.

In the opened window of the list of available products for download, you need to select the section "Technology platform 8.3", then the platform version (for example 8.3.6.2299). Then you need to select the item "Technological platform 1C: Enterprise for Windows", and click on the hyperlink "Download the distribution kit" (Fig. 3).

Figure 3 - selection of the distribution kit for updating the 1C: Enterprise platform

We publish news about the release of new releases of configurations and platforms on our pages. social networks. Subscribe to our pages Facebook or Twitter , - you will always be aware of the news regarding the release of updates.

You can see the update history of typical configurations by following the links to the corresponding Updates pages in our blog:

How to find out your version of the 1C: Enterprise platform?

Open the program. Click Help / About ... The version of your platform is shown in parentheses next to the logo:

Creating a backup copy of the infobase

Before updating the platform, it is necessary for all users to finish working with the program. Next, go to 1C: Enterprise in the "Configurator" mode, and unload the database (Fig. 3.1):

We save it anywhere on your hard drive. (Fig. 3.2)

Tip: create a folder "Archives" or "Backup" where you will always save backup database before updating. Indicate the date of saving in the file name (it will be more convenient to search for the necessary copy of the database if necessary).

If you managed to download the 1C: Enterprise of the required version, you need to unzip the platform files. Next, you need to install the platform by clicking on the setup.exe file in the unzipped folder (Fig. 4).

Figure 4 - platform installation file

Platform update version 8.3 (file version) infobase

To start installing the platform (according to example 1C: Enterprise 8.3), you need to click the "Next" button (Fig. 5).

Figure 5 - the initial installation window for the 1C: Enterprise 8.3 platform

At the next step, you select the set of platform components and the folder for installation. The composition of the components does not need to be changed, it is recommended to install 1C: Enterprise in the default folder. After selection, you must click "Next" (Fig. 6).

Figure 6 - selection of components of the 1C: Enterprise 8.3 program

Next, you need to select the installation language (Russian / Ukrainian), or set the value " System settings", In this case 1C: Enterprise will be installed in the language of the operating system. After selection, you must click the "Next" button (Fig. 7).

Figure 7 - selection of the default interface language in 1C: Enterprise 8.3

You are now ready to start the installation. It is necessary to click the "Install" button (Fig. 8).

Figure 8 - the beginning of the installation of the 1C: Enterprise 8.3 platform

Figure 9 - the process of installing the 1C: Enterprise 8.3 platform

After installation, at the last step, the system will offer to install the protection key driver.

It is only needed if hardware protection is used, i.e. USB HASP key. If used software license without USB HASP dongle, you need to clear the flag.

Also, if a USB HASP security key is used and the platform is being updated, and not installing for the first time, then the installation of the security driver is not required, since it is already installed along with the older release of the platform. To proceed with the installation, click the "Next" button (Fig. 10).

Figure 10 - Installing the protection driver 1C: Enterprise 8.3

After the window with the notification about the completion of the installation is displayed, you need to click the "Finish" button (Fig. 11).

Figure 11 - window for completing the installation of the 1C: Enterprise 8.3 platform

Platform update version 8.2 (file version) infobase

Important! This action must be carried out at all workplaces where 1C is used: Enterprise 8.2

Before performing the update, all users need to exit the program.

Download the distribution kit (Technological platform 1C: Enterprise for Windows)

How to install 1C Enterprise 8.3? This question torments many newbies, in fact, it is much easier than you might think! You don't have to be at all for this. In this step by step instructions I will tell you the process of installing the 1C 8.3 program and how to install the 1C configuration using the example of "1C Enterprise Accounting 8" with an operating room Windows system... The procedure is absolutely similar for other applications, such as 1C Trade Management.

By the way, if you haven't bought 1C yet, you can order any 1C program and customization services from. Delivery and installation of 1C PROF in Moscow and regions for free!

The installation can be conditionally divided into 2 small steps:

1. The first step is to install the 1C 8 platform itself and
2. Configuration installation: There are a lot of 1C configurations, and it is not possible to consider installing all of them. For example, I take the most popular configuration - 1C Enterprise Accounting.

Get 267 1C video tutorials for free:

As a rule, configuration files are packed into an archive, in which setup files... It looks something like this:

In the archive you need to find and run the file "setup.exe".

A window like this will appear:

Here it is necessary for the first three points, as in the picture, to set the parameter “ This component will be installed on HDD". Also, in the menu of interface languages, you can specify the one you need (by default, they are Russian / English).

1C: Enterprise 8.3. Technological platform. Thin client distribution. Server 1C: Enterprise.

The 1C: Enterprise 8 software system includes a platform and applied solutions, developed on its basis, to automate the activities of organizations and individuals. The platform itself is not software product for use by end users who, as a rule, work with one of the many application solutions (configurations) developed on the basis of this platform. This approach makes it possible to automate various activities using a single technological platform. You can download it completely free of charge on our website.

The flexibility of the platform allows 1C: Enterprise 8 to be used in a wide variety of areas:

• automation of industrial and commercial enterprises, budgetary and financial organizations, service enterprises, etc.
• support of the operational management of the enterprise;
• automation of organizational and economic activities;
• accounting with several charts of accounts and arbitrary accounting dimensions, regulated reporting;
• ample opportunities for management accounting and construction of analytical reporting, support for multi-currency accounting;
• solving problems of planning, budgeting and financial analysis;
• payroll and personnel management;
• other areas of application.

Changes in version 8.3:

• Increased scalability and fault tolerance of the server cluster, improved load balancing. A new architecture of server cluster load balancing has been implemented, which automatically distributes the load between the cluster nodes, based on the composition of the servers, the failover criteria set by the administrator and the actual analysis of their available performance. At the same time, it is possible to fine-tune the load on individual cluster nodes. Provided the ability to more accurately control the amount of memory consumed by server worker processes, which makes it possible to increase the cluster's resilience to careless user actions.
• Licensing services and external management sessions. The licensing service allows you to organize a centralized issuance of software client and server licenses, which greatly simplifies the tasks of deploying a server cluster in a virtual environment and dynamic change resources allocated to the server. The external session management service allows you to inform the external system about the beginning and end of a session, receiving in response permission or prohibition to start a session, which allows you to limit the number of users connecting to a particular infobase, keep track of the time the database is used by users, etc. Interaction external system carried out through a web service.
• Automatic update Thin client through the Internet. This opportunity will significantly reduce labor costs when updating software for remote users. Previously automatic update it was only possible when working within a local network.
• Provided support for secure SSL connections and certificates for all Internet protocols and platform mechanisms based on them. For example, Web services and a Thin client can run over a secure channel.
• Restructuring information bases in the background. The new feature allows you to minimize the system downtime required to update application solutions. If earlier it was necessary to stop the work of users for the entire duration of the restructuring of the infobase, now the bulk of the changes are performed in the background, and the termination of the work of users is required only at the final short phase of restructuring. This approach makes it possible to reduce system downtime not even several times, but by orders of magnitude, thereby increasing the level of system availability, which is especially important for cloud services and large-scale deployments with large databases. Background restructuring can be performed incrementally, intermittently, which frees up computing power during periods of peak workload on the working system, and restructuring can be launched when the system is not loaded, for example, at night and on weekends.
• Security profiles. If a service provider provides Internet access to 1C: Enterprise application solutions developed by third-party suppliers, it cannot always control the reliability of such solutions. At the same time, he must ensure the uninterrupted operation of the service as a whole and other applied solutions provided within the framework of this service. For this purpose, security profiles are implemented in the 1C: Enterprise version 8.3 server cluster. They prohibit the application solution from performing actions that are potentially dangerous for the functioning of the server cluster and the entire service, such as:
  • appeal to file system server;
  • launching COM objects, external treatments and reports, applications installed on the server;
  • usage external components"1C: Enterprises";
  • access to Internet resources.
• The platform version 8.3 received a new interface for the Taxi applications, which is more convenient and intuitive. It implements a number of new approaches to working with applied solutions, including:
  • The functions necessary for easy navigation through the application are implemented in several auxiliary panels: tools, favorites, history, etc .;
  • The developer of the application solution can set some standard composition and arrangement of these panels in accordance with the purpose and features of the application;
  • The user can independently design his workspace by placing panels in different areas of the screen. For example, you can create a "minimalistic" workplace, leaving only the toolbar on the screen, while all navigation functions in the applied solution will remain available with its help. Or you can place several panels on the screen at once, providing yourself with various and fast opportunities transition to various functions applications.
  • Any section, list, database object, report or processing, as well as a command can be added to the "favorites", so that later, if necessary, quickly return to them.
• Among the interface innovations of the new version of the platform, one can also note:
  • Option for the interface to work without using modal windows... In this mode, no new browser windows are opened, which increases the convenience, productivity and stability of work through the web client, allows you to work with 1C: Enterprise applications through a browser on any mobile devices;
  • simplification of lists customization;
  • a new line-by-line input mechanism that significantly speeds up data retrieval.
• Optimizing performance. Improvements have affected client workstations, server cluster, mechanisms of interaction with various DBMS, work with memory. To optimize the work with the DBMS, the largest amount of work was carried out for Microsoft SQL Server, including providing support for working with newest version Microsoft SQL Server 2012.
• Improvements to application development tools. The ability to load / unload 1C configurations (structure and data) as a set of files is provided. To store the uploaded data, it is used XML format... The possibilities of organizing the program code have been expanded due to the selection and grouping of arbitrary areas of text in the module editor. The developer can give each area its own name, which makes the code more readable. Improved contextual help - now it is also displayed when setting parameters of procedures and functions, indicating their types and possible options syntax. Also, in the contextual tooltip, automatic recognition and display of developer comments, drawn up in accordance with development standards, is implemented - when typing the name of a procedure or function, extended information on its purpose and use cases is displayed, and when typing a parameter - for this specific parameter. To provide developers with a convenient tool for quick contextual search of information on topics of interest, the syntax assistant has added links to collections of teaching materials on relevant topics, which are regularly updated on the specialized Internet resource 1C.
• Automated testing. The new mechanism allows automated testing of applied solutions using algorithms described in the embedded language. It is also possible to record interactive user actions in a file for their subsequent analysis, or to form an automated test based on them.
• The functional and visual capabilities of reporting have been expanded, new presentation capabilities of business diagrams, additional statistical and aggregate functions, such as ABC, have been implemented.
• Working with external data sources is much closer in functionality and convenience to standard configuration objects. Data external sources can be placed in temporary tables for use in complex queries, used as part of separators in cloud applications, and forms can be programmatically overridden to view them. It also became possible to connect multidimensional data sources, such as Microsoft Analysis Services, Oracle Essbase, IBM InfoSphere Warehouse.
• Supported special treatment compatibility of infobases with previous versions... It allows you to use applied solutions developed on the 1C: Enterprise platform versions 8.0, 8.1 and 8.2 without additional processing. Compatibility mode also allows you to downgrade platforms from version 8.3 to 8.2, if necessary. In order to use all the features of version 8.3, in solutions created on the platform "1C: Enterprise 8" more early versions, you will need to make minor changes.