In order to get to the web interface of the router, you must open your internet browser and in the address bar dial 192. 168.1.1, Username - admin. , Password – admin. (Provided that the router has factory settings, and its IP has not changed).

Changing the factory password

So that no one except you can enter the router settings, you must change the password to enter the settings.

To do this, select the left in the menu System tools(System Tools) - Password(Password) and enter the settings:

Previous username :: Old username, enter Admin
Previous Password: old passwordintroduce admin
New username: Enter a new username, you can leave Admin
New password: We enter a new password
Confirm the password: Confirm the new password

Connecting Internet Connection

Go to B. Net(NETWORK) - Internet access(Internet Access). Here you choose how (for what technology) will be connected to the Internet:

Configuration 3G / 4G Connections

1. To configure the Internet via USB modem (3G / 4G) go to Net (NETWORK) - 3G..

Region: Russia
Mobile Internet Service Provider: Choose Your Opartor Communication
Connection Mode: Connect automatically
Authentication Type: Auto

2. If your telecom operator is not among the proposed, go to Additionally(Advanced Settings). Let the point on " Specify manually set number, APN, username and password"Here we enter data from your telecom operator. After entering the settings, click Save(Save).

3. To configure Internet connection via WAN-port go to Net(NETWORK) - Wan.. Here in the grade WAN Connection Type(Wan Connection Type) Choose the type of connection that your provider is used.

Configuring PPPOE Connection

1. In field Wan connection type (Wan Connection Type.): Select PPPoE / Russia PPPoe
2. Username
3. Password ( Confirm the password(Confirm Password)
4. Secondary connection(Secondary Connection): Disable (Disabled)
5. WAN connection mode(Wan Connection Mode): Connect automatically(Connect Automatically)
6. Save (Save). Internet is configured.

Setting up L2TP connection

1. WAN Connection Type L2TP / Russia L2TP
2. Username(User Name): Your login under the contract
3. Password (Password): Your password under the contract. In some firmware, just below asks Confirm the password(Confirm Password)
4. Put the point on Dynamic IP. (Dinamic IP)
5. IP address / server name
6. MTU size (in bytes)
7. Connection mode (Wan Connection Mode) - Connect automatically (Connect Automatically)
8. After the introduction of the above settings click Save (Save). Internet is configured.

Setting up PPTP (VPN) with automatic receipt of the local IP address (DHCP)

1. WAN Connection Type (Wan Connection Type): Select PPTP / Russia PPTP
2. Username(User Name): Your login under the contract
3. Password (Password): Your password under the contract. In some firmware, just below asks Confirm the password(Confirm Password)
4. Put the point on Dynamic IP. (Dinamic IP)
5. IP address / server name (Server IP Address / Name) - address or server name (indicated in the contract)
6. MTU size (in bytes) (MTU Size) - change the value by 1450 or less
7. Connection mode (Wan Connection Mode) - Connect automatically (Connect Automatically)
8. After the introduction of the above settings click Save (Save).

Setting PPTP (VPN) with a static local IP address

1. WAN Connection Type (Wan Connection Type): Select PPTP / Russia PPTP
2. Username(User Name): Your login under the contract
3. Password (Password): Your password under the contract. In some firmware, just below asks Confirm the password(Confirm Password)
4. Choose Static IP. Static IP Address).
5. In fields IP address / server name (Server IP Address / Name) IP address (IP Address), Subnet mask (Subnet Mask), Main gate (Gateway) We enter data from the contract. In field DNS. You can enter DNS. Address of your provider.
6. Connection mode (Wan Connection Mode) - Connect automatically (Connect Automatically)
7. After the introduction of the above settings click Save (Save).

NAT with automatic receipt of IP address (DHCP)

1. In the WAN Connection Type field ( Wan Connection Type.): Select Dinamic IP. (Dynamic IP)

Setting up Wi-Fi on the router

Configure Wi-Fi connection. In the side menu, go to Wireless. (Wireless mode). In the window that opens, enter the following settings:

1. SSID1. Your name is wireless network.

2. Region (Region): You can put Russia, and you can not choose anything. This is not critical.

Set up encryption Wi-Fi. In the side menu proceed to Wireless Security (Wireless Protection):

1. At the bottom, choose the type of encryption WPA-PSK / WPA2-PSK
2. Psk password. (PSK password): Enter the password on Wi-Fi Network. Password should not be less than 8 characters
3. Press the bottom button Save. (Save). After saving the settings, the router will be prompted, ignore this requirement (red inscription below).

Protocol - choose the required protocol

Status. - Enable

Press Save..

A source: rudevice.ru.

class \u003d "Eliadunit"\u003e

From a plurality of low-cost TL-MR3420 budgets, TP-LINK is highlighted by using a two-tailed scheme and the possibility of connecting a GSM or CDMA modem as a backup Internet channel. The rest is worth mentioning management throughput, Protection from attacks from outside, network diagnostics, as well as support for the secure connection function Wi-Fi Protected Setup, which has QSS in TP-LINK.

In this article, we will customize the router for its direct purpose, that is, the distribution of the Internet by LAN and Wi-Fi through 3G connection.

Connection 3G router to computerand its setup

1. Make necessary settings on the network card of his computer.

For Windows XP: Start - Control Panel - Network Connections - Local Network Connection - Properties - Internet Protocol (TCP / IP)- Properties - Get IP automatically and Get the DNS server address automatically.

For Windows 7: Start - dial watching network connections Connection on the LAN - Properties - Internet Version Protocol 4 (TCP / IPv4) And properties - get IP automatically and get the address of the DNS server automatically.

2. Connect the Ethernet cable network card and one of the router ports.but(For example, to port number 1 in Figure).

check that you received the IP address automatically from the router:

For TL-MR3420, 3220

For TL-MR3020

Make sure the mode switch on the device itself is in the 3G position

3. Open the browser window and in the address bar, enter:

For tL-MR3420, 3220 - 192.168.1.1 login and password for entry admin./admin.
For tL-MT3020. - 192.168.0.254 also admin./admin. , and press the entrance.

After pressing the input button, the settings page opens. After you have visited the password, " System " and " Admin Password ".

PS ... You can now and merissify the Web interface, this will require WINSCP to access. Use the router address (192.168.1.1), login (root) and password that you indicated to access the router.

Unpack the RUSSIAN archive and copy it to the router using WinScp

Setting 3G modem

1. First, we need to specify the type of network access.

Click the tab Network - Internet Access
Select Mode 3G ONLY(You can and 3G Preferred).

Save. - Save

2. Insert the 3G modem into the USB connector of the router.
Click the Status tab, make sure that the modem has been successfully recognized by the router:

3. If the modem is determined, then go to the tab Network. - 3G.
In the region (location) select Russia. (Russian Federation)
In field Mobile ISP Choose your provider.

Save.

My modem (Huaway E367) for Beeline started with such settings:

4. To check the status of the connectiongo to the menu "Status"

If you successfully connect to STATUS "e, you should have approximately the following:

Configuring a wireless router network

1. Open the browser and in the address stringhttp://192.168.1.1/
2. For access to Web interface Devices You will request a username and password by default admin./admin.
3. Go to the section QSS. (QSS function) and turn it off by pressingDisable (Disable)





4. Going on the Web interface device go to the menu " Wireless."(Wireless mode) and choose the submenu there" Wireless settings"(Settings wireless mode)

Wireless Network Name. (Network Name) - Your Network Name
Channel (Channel) - Better to choose manually the most free
Region (Region) - Russia




After settings - save - Save. (Save)

5. Go to the submenu " Wireless Security"(Wireless Protection)

Choose WPA-PSK / WPA2-PSK
In field PSK PASSWORD (PSK Password) Enter the password for your wireless network (at least 8 characters, English letters / numbers)





Save - Save..
After that restart your router via the "System Tools" section -\u003e Reboot (reboot)

If you have after that there is a connection problem mobile devicesthen do the following
- Disable the QSS feature in the QSS tab
- change the values \u200b\u200bof two parameters RTS Threshold. and Fragmentation Threshold. In the tabWireless\u003e Wireless Advanced(Wireless mode - Additional settings Wireless mode)
RTS Threshold - 2305
Fragmentation Threshold - 2304

Configure your Wi-Fi map on a computer to access the network

To do this, click the left mouse button once on the icon. network card In the lower right corner of the screen (next to the clock). In the window that appears, click the Connect button and enter the access key to the wireless network you specified in the previous paragraph.

In this article, we will talk about the TL-MR3420 router and its compatibility with USB modems of different operators of Ukraine and Russia. The main problem is that TP-LINK TL-MR3420 (like any other router) It may not work with all modem and operators. And before buying this router, you must necessarily check it for compatibility with your modem. And even better, choose a modem from the list of compatible exactly for this router (If you are planning to buy it, or have already bought). It may turn out that after purchasing, connecting the modem and settings, the router simply will not see the modem, or refuse to connect to the Internet.

How to check whether a modem compatible with TP-LINK TL-MR3420?

On the official TP-LINK website there are lists of compatible modems specifically for this router. Everything is very confused there. Now I will show how to see these lists. They are different for Ukraine and Russia.

Important moment! If a the modem is in the list of compatible, then there is no 100% guarantee that everything will work. I already wrote above that much depends on the firmware and hardware version. Yes, and modem firmware may change.

But if modem is not in the list of compatibleThis does not mean that it is not supported by TL-MR3420. Just this modem was not checked in TP-LINK.

1 As far as I understand, it is for testing modems ukrainian operators You need to follow the link http://www.tp-link.ua/ru/download/tl-mr3420_v2.html#compatibility, choose your hardware version of the router (It is indicated from the bottom of the router himself, if you have not bought it, you can clarify the sellers, what kind of hardware version they have in stock). Further, on the Compatibility tab, click on the "List of Compatible 3G / 3.75G USB Modems" link.

Save the file to the computer, open through Excel and we are looking for the required modem in the list.

2 if you have modem russian operator , Click on the link http://www.tp-linkru.com/download/tl-mr3420_v2.html#compatibility. In the same way, choosing the hardware version of the router, on the Compatibility tab, click on the link.

A list of compatible modems opens. Where the modem model is indicated, the operator, etc., also carefully read the information that is at the beginning of the page.

What modem works exactly?

It works exactly with Verizon USB720. This is the Ukrainian Provider InterTelecom. It should also work with Huawei EC 306.

Models that I found in reviews (I can not guarantee compatibility): Verizon UM150-VW, LGVL600, Huawei E1550, Sierra598u, Pantech UM-185, Huawei E352, Novatel U760, Pantech UM190, PANTECH UM150.

In fact, TP-LINK TL-MR3420 supports a lot of modems.

How to set up TP-LINK TL-MR3420 with 3G / 4G USB modem?

Very simple. I wrote about this in the article :. Everything is equally there.

Brief instruction on the example of TL-MR3420:

Turn on the router. We connect a USB modem to it. Connecting in network cable, or via WiFi from the device from which we will configure.

Go to. Or according to the instructions.

In the "Network" section (WAN) - "3G / 4G" see if the router defined our modem, then choose the country, the operator and connect to the Internet. If the connection is set, we save the settings.

If the provider is not in the list, then the number, username and password are manually specified.

What to do if the TP-Link TL-MR3420 does not define the modem and does not connect to the Internet?

Many options, consider the most popular:

1. If you connect a modem via a USB extension, then connect directly. Without extender.
2. Update the TL-MR3420 router firmware. If you have updated, and the modem is not exactly determined, then try to put another firmware. Even more old. It very often helps.
3. Write in support of TP-LINK. Let's describe in detail. Specify the hardware version of the router, modem model, operator. Perhaps they will tell you which firmware to install, or send you a bin file for your modem.
4. If the modem is determined, but there is no connection to the Internet, then first check if there is a connection via a modem from a computer. Make sure you correctly indicate the parameters in the router settings. And there is a coverage of your operator in the place where the router is installed.

That's all. In the comments, you can ask your questions, and of course divides useful information About this router. I hope you managed to configure everything, and everything works fine. Good luck!

1. Connect an Ethernet cable included in your apartment in the port Internet Your router.

2. Make the necessary settings on the network card of your computer. To do this, click the left button on the button. Start, Select Control Panel, Further, paragraph Network connections.

In the right mouse button that opens, click the Network Card icon and context menu Select Properties.

Left mouse button once click Internet TCP / IP Protocol and click on the button Properties.

Make settings similarly shown in Figure:

3. Connect the Ethernet cable network card and one of the router ports, for example port number 1, as shown in the figure.

4. Open the browser window and enter in the address bar http://192.168.0.1 and press ENTER. In the authorization window that appears in the field Username Choose admin.,

in field Password dial admin., and press entrance.

5. After pressing the button entrance The settings page opens. To begin with, we need to specify the type of network access: note Wan Only.

Attention!! For the correct operation of the IPTV + Internet bundle, the router setting is necessary via PPTP protocol.

Then you need to configure this very WAN port: choose it below (left) and fill the fields as shown in the figure. Namely:

Wan Connection Type. - PPTP / RUSSIA PPTP

User Name. - PW ***

Password. - ********

Choose Static IP.

Server IP AddressName. - pptp.freedom

IP address - 10.*.*.*

SubnetMask. - 255.255.255.*

Gateway. - 10.*.*.*

DNS. - 195.98.64.65

Choose Connect Automatically.

Press the button Save.

6. Next, we will configure the routing for the operation of local resources, including torrents: Select the tab Advanced Routing in the menu on the left and Static Routing List. Next, fill as shown in the picture using your data from the registration card, namely the gateway address (column Gateway. on the router).

We add the first route:

Click Add New., and fill the data - Destination Network. (like on a picture), Subnet Mask. (like on a picture), DEFAULT GATEWWY. (Your gateway address from the registration card), Status. Leave Enable. The rest of the routes by analogy.

7. Now configure the wireless network:

In the router menu, choose the tab Wireless. And in it Wireless Settings. Fill data:

Wireless Network Name. - Your wireless network name (for convenience you can set a name for the network as well as login from the subscriber's registration card)

Region - Russia.

Channel - AUTO.

Mode. - 11bgn Mixed

Channel Width. - AUTO.

Max TX Rate. - 300mbps.

Button Save. We still save the data on.

Password for WiFi network You can set on the tab Wireless Security in point WPA-PSK / WPA2-PSK - PSK Password: Here I enter a password to wireless the network (you can set the network password as well as a password to access the Internet from the subscriber's registration card)

8. Know your way Wi-Fi Map On a computer to access the network.

To do this, click the left mouse button once on the network card icon in the lower right corner of the screen (next to the clock). In the window that appears, click To plug and enter Wireless Access Keywhich you asked in the previous paragraph.

IN modern world using home router Missed and comfortable. Universal location and minimum occupied space make them indispensable in public Internet, especially if necessary, use the network on multiple devices simultaneously.

However, there is one small difficulty. After purchasing the device, it is not always convenient to hire a professional for its configuration. Below, the above material will tell you how to set up TP-LINK TL-MR3420 yourself, as well as about its characteristics.

Characteristics

Before you configure the router TP-LINK Models TL-MR3420, read its characteristics.

This router is available at a budget price and has all the advantages of modern routers. At a speed of up to 300 MB / c, you can fully comfort movies in maximum resolution, download large files into several gigabytes. Simultaneously, mobile Internet Always be at hand. For those who need more specific numbers, the table will be below.

Description of the device

Router looks stylish thanks to smooth forms. The main material of the housing is white plastic. The lower part of the router is made of matte gray plastic. LEDs on the front side standard, with green illumination. On the bottom surface there are two T-shaped cuts for mounting on the wall.

In the box with the device are attached: switching cord, CD with software, power supply, 2 removable Wi-Fi antennas.

TP LINK TL MR3420 has five ports that are located on the back side, 4 lan-port and 1 van port, the reset button and the power connector.

And the USB port, to connect a USB mode.

Technical equipment

The device works at the ATHEROS AR7241 series chip, as well as on central processor With a capacity of 400-megahertz. There is a cooling system. The microcircuit of the company of the same name belongs to the fourth generation of XPAN, includes two radio paint.

Setting

Let us turn to the detailed instructions for setting up the device:

1. Service provider cable Set to the "Internet" port.
   
2. Connect two antennas.
   
3. Connect the power supply to the device and network.
4. Enable the router with the "POWER" button and wait a few seconds.
5. Open any browser convenient for you and independently drive the address 192.168.0.1
6. Enter the word "admin" and "password" graphs "Admin", as shown in the screenshot.
7. This item may need firmware update. Look at the label hardware version of the equipment, and then read the firmware version. This information will appear when you enter your username and password. In case the version is outdated, on the official TP LINK website you need to download last version firmware. Then open the "System Tools" on the router page and go to "Update the built-in software", and open the desired file.previously saved on the computer.
   Video S. detailed instructions How to flash router:
   
8. Tab "Network" - go to "Internet access". Choose the item - "only WAN". Do not forget to click "Save".
   
9. Go to the "WAN" tab. In the Count "Connection Type", set the value corresponding to yours. It can be clarified on the official website of the provider or in your contract. It can be a dynamic IP address, static IP address, L2TP, PPTP or PPPOE. For the first three types, the remaining items are not required to fill out, you will need to enter a login and password from the contract, and the PPTP connection will require an indication of the IP address, the DNS server addresses, the subnet gateway, and the subnet mask, as written in the contract.
   
10. Go to the "Wireless Mode" tab. In the "Name Name" column, we enter the name you enjoy. It is him you will see in available connections via Wi-Fi network.
    
    The "Wireless Protection" tab allows us to come up with a password. Take care to be reliable. But first select the WPA2 / PSK version.
11. You can clone your MAC address. This is useful in changing network equipment not to call and save your time. Just go to the "Cloning MAC Address" tab, click the same button and save.
    

On this, the main setting of your router is complete. Detailed setting is better not to do and call a specialist.

Changing the factory password

In order to protect your internet connection, namely, protect your settings from other users, it is worth changing the standard password.

• We open the tab - "System Tools", go to the "Password" tab.
• In the "previous" field name fields and password enter "Admin".
• In the "New" name of the user, enter any name you like.
• Change the "new" password at your discretion: try to choose something easily memorable, but at the same time complex for the selection.
• In confirmation, duplicate your password.

Attention: If you forget a new password, to return to this menu you will need to reset the router to the factory settings.

Checking performance

When you are already familiar with how to configure your router, you should check its functioning. Here is the easiest way to analyze the wireless network on your personal Computer or laptop:

1. Enter the "Network Management Center", right-click on the monitor icon in the lower right corner of the screen.
2. In the menu that opens, select the network you created and connect, entering the invented password.
3. Then open the browser and go to the page of any authoritative search engine (they have the minimum probability of servers failure). If the search engine opened - everything works.

Conclusion

For a total mass of feedback on the MR3420 model, it can be concluded that this is the most acceptable and affordable option for the home wireless network with the support of the mobile Internet.

The advantages of this model are the cost, pleasant characteristics and ease of configuration. Also, the model guarantees stable operation, which will allow you to continuously enjoy your Wi-Fi connection. The only minus can be the lack of a USB extension card in the kit: you should remember this feature and buy it immediately, if there is a need.

Additional video configuration video tP-LINK router TL-MR3420:

We hope that the router setting has passed for you as easily and painlessly, enjoy the Internet surfing.