In the iPhone, and immediately faced a problem - the fact is that when using the Internet (or) there are certain restrictions on downloading files. Accordingly, when trying to download the game from App Store. (or podcast) exceeding 100 megabytes, by means of cellular data, iPad or iPhone asks to connect to Wi-Fi network, and displays a notification:

The size of this object exceeds 100 MB. To download the Sky Force 2014, you need to connect to Wi-Fi network (if incremental loading is not available for this content).

And this limit (or restriction, as more convenient) applies only to standard iOS applications. For example installed in iPhone File The manager of such caps does not give out.

iPhone: Swing applications exceeding 100 MB

This way of circumventing the limit is successfully tested for iPhone 7 C iOS 10.3.2

1. Turning on cell data in the settings Cellular communication, Run the App Store and are looking for an application or game over 100 MB, trying to download or buy
2. iPhone gives a limit message due to the exceedable file size, click - OK
3. In the settings or in turn - airrest
4. We go to the settings and put the date - April 1, 2017
5. Continuing is in airport, and turn on it again.
6. Turn off the airrest and about the miracle application start downloading, the boot process is observed on one of the desktops.
7. Return the date now, and then the App Store will stop working and use the application.

For owners of newer firmware, the method described above may not work, so we downloaded a new iphone of 150 megabytes using -.

Bypass loading restrictions in podcasts

When trying to download a new musical selection (or other) from the application (using the Internet cellular operator) The iPhone user also faces the question - how to download a podcast more than 100 MB? After all, and here we will notify us:

The object is greater than 100 MB. To download "Artem Dmitriev Aka Chill - Best of Chill Winter 2016 Special Mix" Connect to the Wi-Fi network or use iTunes on your computer.

No, of course, you can go home, turn on the computer with and pump gigabytes of podcasts, or use the point access Wi-Fi, but in century mobile technology (especially with unlimited mob. Internet) Include the computer already a queen, and there is no access point nearby. Therefore, we have a little disappear and share bypass paths. Download the file more than 100 megabytes in iPhone podcasts you can still:

• We run podcasts, we go to the Search tab (1) and write the name of the podcast channel (2), we write - chill and click the Search button (Search)
• We go to our Channel Chill (3) and look after a podcast as soon as you decide, pull out the control point, turn on the air (4), remove the control point and press the cloud icon with the arrow (5)
• Now launch the settings - the main - date and time - set the date: March 8, 2017
• Turn off and turn on the iPhone
• Turn off the airrest, go into the podcasts, click the section in the NEPR. And at the very top you see how your podcast is loading more than 100 MB.
• After downloading, exhibit the correct date and time, and then get acquainted with this -

Today we managed to download two files exceeding 100 MB in iPhone, without the help of a computer and Wi-Fi. The game we downloaded from the App Store store, audomashers from the application podcasts. All successful downloads!

Mobile Internet every year is becoming faster and cheaper (relatively), so the need for wireless wi-Fi networks Gradually disappears. If the owners of smartphones based on Android can use the Internet from a cellular operator without any restrictions, then the owners of all Apple's iPhone and iPad are forced to experience serious inconvenience. If when loading through mobile Internet Applicated from App Store applications Excess 150 MB on iOS 11, an error message will appear.

Apple added to the IOS 11 operating system restriction, which does not allow the iPhone and iPad holders to download via mobile Internet programs and games weighing more than 150 MB from the App Store store. IN operating system iOS 10 This limitation was at the level of 100 MB, and in earlier assemblies everything was even worse. An error message from the "apple" corporation claims that it takes to connect the application to the Wi-Fi network.

Most likely, the American corporation intentionally added such a restriction in iOS so that the owners of the iPhone and iPad are forced to experience the need for Wi-Fi networks. This simplicity is simply no explanation, because for the mobile Internet, all subscribers pay from their own pocket and, probably, the user has the right to decide what to download. Previously, there was a way to get around this restriction, simply by turning on the "airrest" and reloading the phone, however, it was closed in iOS 10.3.3, so long time users of "apple" devices experienced great inconvenience.

However, there is a fairly simple way to get around the restriction of 150 MB when loading from the App Store through the mobile Internet. It works extremely simple, and it is not necessary to even perform a reboot to the download, that is, from the point of view of execution, it is even easier for those that were before. To begin with, it is necessary to download one or more applications to download, after which you wait for an error message.

When it appears, you need to go to "Settings" and open the "Main" sections - "Date and Time". Here you should deactivate the switch opposite "automatically", after which you need to manually replace the date on the later. For example, if now on November 26, then you can choose on November 27 or December 10 - any day in the future. When this manipulation has done, you should return to the desktop and click on all application icons that did not want to download without Wi-Fi. If everything was done correctly, they will be loaded on the device without any problems, even if their weight exceeds 1 GB.

It is important to note that during their download and the installation to translate the date back in any way cannot, because in this case the error message will appear again, and the entire loading procedure will have to begin first that the loss of mobile Internet traffic is wasting. This method works on all versions of the operating system.

Surely, many owners are satisfied with their iPhone, but sometimes there are moments when some restrictions are incredibly annoying.

For example, you can take the case when you want to download the game or application via Mobile Internet. You will not be able to do this, you simply will appear that there is a limit of 150 MB.

Today we will talk how to get around this restriction and remove this annoying limit. It will be very informative and useful.

How to remove restrictions 150 MB on iPhone?

This limit is set by default, remove it standard methods It will not work. But there is one very tricky bug, which many users regularly use.

As far as is known, it works exactly on all versions of iOS 11 and iOS 12. Therefore, if you have an iPhone with this version, then you start reading the instructions faster.

To download the game or program more than 150 MB, follow these steps:

• go to B. App Store., we find the right game and click Download (in my case, this is "Gangstar New Orleans", it weighs 1.2 GB);

  Click "Download"

• a window appears that "the program is more than 150 MB" - you just click OK;

  

• now, come in Settings — Maintenance — date and time - Turn off Automatically;

  

  Settings - Basic - Date and Time - Automatically

• it appeared possible to adjust the date and now you need to change the date and any next year (20, 21, 22 - absolutely not important). To save, simply go to the main screen;

  

• we find your game label / programs under which it is written Expectation - Click on it;
• download started after completion, you can return your time settings back, turning on Automatically.

  

It's important to know! We definitely change not only the number, but also a year. I tried to change only the number and then nothing happened.

I also want to remind you that it is a bug. This means that in any next version of iOS., it can be removed and then we will lose such lifehak.

In order for your new iPhone to always work correctly, you must regularly fulfill the update of the branded operating system - iOS. New versions of the firmware eliminate all the shortcomings and problems of previous, identified during operation - according to reviews and remarks of users. They also make the operation of devices more stable, fast and clear. At the same time, the possibilities are significantly expanding as system applicationsSo and completely reveals the potential of "iron" in iPhone. Let's figure out how to update the iPhone correctly so that some unforeseen error does not arise.

Before the procedure

If you are the owner of the "six" version with a memory volume by 16 gigabytes, take care of the presence of sufficient free amount of memory. Keep in mind that even if it is enough to download the archived folder with updates, then when it is unpacking and installing it on the device, it will be needed slightly more. Therefore, try to always leave a small ground, beyond the specified volume of the update package. If this is not done - an error may occur at any time. Loading can be interrupted, iPhone - hang or stuck in the recovery loop, and it will be necessary to perform everything at best, at worst - forcibly restore the gadget, with full data loss.

Therefore, remember three main points that need to be done before updating iOS: make sure there is enough free space, update up to latest version iTunes, and be sure to back up your computer or in iCloud.

This will minimize the risk of unsuccessful update. And in the case of a system failure - you can restore all your data without loss.

For sure to eliminate the likelihood of errors, it will not prevent previously updating the operating system of your computer, built-in security programs, as well as installed antivirus. After that restart the PC to apply all updates, and you can start loading new firmware on the iPhone.

Update

There are two main ways to download and install updates. The first - from the iPhone itself, subject to a steady connection to the network via Wi-Fi, the second - using an authorized computer, in the iTunes - iTunes menu.

The main differences between them are speed and convenience.

The first option is convenient because nothing is required in addition to the smartphone and the Internet. The device will execute the entire procedure itself (if you choose this method - be sure to put an iPhone to charging - it is unknown, how much time will take the download and installation). Downloading iOS passes longer, as a purely physically - router, sinking Wi-Fi, makes the data transfer rate - slow.

The second - it happens much faster, but can not do without PC and connecting through the cable.

To make an update from the device itself - come from the settings menu - the main, and select - update the software.
After searching online recent updates iOS - the offer will be displayed on their download and installation - for this click on the appropriate message from below.

Then confirm the consent to the proposed terms of use. After that, you don't need to do anything else, Inephone will execute everything yourself. Just wait for the end of the process. It is best to carry out this procedure in the evening, then the Internet speed is higher, and you want to download updates less. And by the morning the smartphone will be ready for work.

As soon as the fresh update appears - iTunes when connected, it will surely notify you about it.

If you yourself initiate this process - connect the phone to the PC cable (preferably original), run iTunes. In its menu, find your iPhone among devices. In the Synchronization and Settings tab, initiate the update.

Everything, further processes will flow automatically. The main thing is that the network connection is stable. After downloading the IOS update package, the installation will start, during which the iPhone can repeatedly reboot - this is normal.

But it happens that on your part, all the conditions are met, but it is not possible to update the iOS. An error is stubbornly high, and there is no possibility to use the device.

Types and causes of errors

It happens that by running the firmware update process, a system message type is displayed on the screen: "Failed to connect to the iPhone update server. First of all - check the device connection to the Internet, and eliminate network problems. An error may be issued and when the cable is fault or its unsuitability (always use the branded for the firmware). Try also to eliminate the router's malfunctions, connecting the computer directly to the network.

In addition, it is possible that it is at this point that Apple has temporary problems on the IOS activation servers. Repeat everything a little later. If you still failed to establish a connection with the iPhone update server, try to connect to another PC, with a network from another operator.

Sometimes an error occurs due to restrictions that are superimposed installed antivirus or a computer firewall, or non-compliance with the versions of their updates. Therefore, set all the current databases (including for the computer operating system), restart the PC and repeat the phone firmware.

In some cases, the software error is solved by the so-called. "Rigid" reboot. It will help in the event that the smartphone has stopped responding to any user actions. To start it, simultaneously press, and ten seconds hold the buttons in this state - Home with Power. The gadget screen should go out. Release the buttons, wait for the logo in the center of the display. After that, press and immediately release Power - iPhone should boot in normal mode.

When the phone is unexpectedly ground, and there is no response to pressing the buttons - make sure the battery device is not discharged. Put it for charging just in case, and wait 10-15 minutes so that it scores enough energy to start all systems. After that, enable it in the usual way, and repeat the update procedure.

If the above methods did not help, then, most likely, you will have to restore the device using iTunes or ICloud (we hope that listening to our advice, you have created copies of all important data). The procedure is similar to the update process, only with the corresponding request, select you to restore. When restoring - the iPhone must automatically install the latest firmware version.

If you need to restore or update the device, since your device has encountered an update error, or an unstable beta version of iOS, you need to download the IOS firmware package with using iTunes.. But what if there is no access to the Internet or you fear that update iTunes. Can get stuck in recovery mode or Apple logo, what can you do? Fortunately, below we will tell you how to download iOS IPSW file in offline mode For your iPhone / iPad in iOS 11/12.

Refresh the latest version of iOS system step instructions

Part 1: Why you can't download the firmware through iTunes

iTunes can help download and install the latest IOS 11 iPSW file on the device, but what if any problems arose, such as network connectiondamaged during loading, this will lead to iOS update It will not be completed when installing or updating, then your device is completely stuck or closed, then you need to restore your device, and all data on it will be deleted.

Part 2: Hand loading iOS firmware offline without iTunes

Based on what I illustrated, we suggest you choose another one safe method Downloading firmware, for example, which can help you automatically find a compatible firmware package and download iOS firmware offline without connecting to the Internet required during this process. Then you can freely update your device or correct all kinds of IOS problems in the operating system without fear of data loss. Now follow these steps and find out how to download iOS firmware Without iTunes for your iPhone / iPad in iOS 11/12.

Download and install on Tenorhare Reiboot to your computer, and then run it.

Step 1. After starting the program, connect the iOS device to a computer using a USB cable. Click "Solve all iOS freezes" in the main interface.

Step 2: Then the tool will automatically find the appropriate firmware package for your iOS device. Click the Next button to start loading the firmware package on the Internet. If something did not work out during the download, you can click "Copy" to download through the browser.

Step 3: After all this, you can start updating your device or restore your operating system.

Super light and safe, isn't it? If you also wonder how to get iOS firmware with iTunes, continue to read.

Part 3: How to get iOS 11/12 firmware using iTunes

If you have a habit of doing backup Regularly, this method can be useful, how to get the iOS firmware using iTunes.

Step 1. First of all, connect your device to a PC / Mac computer via a USB cable. And make sure that iTunes is open and access to the Internet.

Step 2. Click on your device on the iTunes panel. Then click Restore iPhone to download the file, click "Restore iPhone".

Please note that finding the iPhone must be disabled.

Step 3. Wait until iTunes execute replication with update servers, then click "Not to do backup", Because you just want to download the IPSW file if you want, you can also backup.

Step 4. Then click "Restore and Update" and click the Download icon, now you can see that downloads its IPSW files for the iPhone.

The first method is much easier and safer than the second method. So go to Tenorshare Reiboot and try in the near future! If you encounter any problem, let us know below, commenting, we are waiting for your offer.