What does the device mean is busy. Error when copying files from Android to PC: The required resource is busy

When copying multimedia files from a smartphone with an Android operating system to a computer, users can encounter errors to copy files and folder with the required resource busy. This error lies in the wrong phone connection or an incorrectly selected data transfer protocol. Therefore, to correct this problem, you should properly configure the work of both gadgets.

Causes of errors when copying files: The required resource is busy

When connecting a smartphone or a tablet running operating system Android to the computer, the user may encounter an error. The required resource is busy and refusing to further perform actions.

There is such a problem due to the fact that the device is connected not as a flash drive, but via the MPT protocol, which has limitations and causes an error when copying a file or folder.

IMPORTANT! During the opening of the video folder, photo or audio files, you can replace that building a file list or formation of a miniature is not too fast. And since the MTP protocol does not support multitasking, then copying files during the execution of another process (even to build a list or thumbnail) can cause an error the required resource is busy.

Methods for solving file copying error Required resource busy

If your PC has an error of copying a file or folder from the phone, then you need to wait until Windows recognizes miniatures. Only after the formation of file lists and folders can be copied or moving. Wherein this action Do not perform in parallel with other tasks. For example, copy the video and, while it moves, you run from the flash drive View photo. This can cause a crash failure.

Also to Windows faster Formed files of files and folders, it is standing in the conductor to set the "Minor Icons" or "Table" viewer. The system will not form miniatures, and quickly builds a list.

In the event that you need to copy a whole folder with files, we recommend not opening it, but copy immediately.

You also need to mark the moment that if there are programs on the computer that when you open the photos and video, it is better before copying files and before connecting to a PC device to disable them for a while.

IMPORTANT! Antiviruses do not scan the contents of the devices that are connected via the MTP protocol. However, there are such advocates that are endowed with this function.

In the event that the above recommendations do not help get rid of the error when copying files, you need to check on the computer and smartphone all installed applications And find out which one can access files during their copying.

Solution 1. Turn on the device

Solution: Look at the ON indicator located on the device. If the indicator does not shine, the device is turned off. Make sure that the power cord is securely connected to the device and electrical outlet. Press the ON button to turn on the device.

Solution 2. Check the correctness of the original

If this does not help, use the following solution.

Solution 3. Wait until the device completes the execution of the current operation.

Solution: Check the indicator on .. if it flashes, the device is busy. Cause: The device was occupied by copying or printing. If this does not help, use the following solution.

Solution 4. The device does not support the type of paper or envelope

Cause: The device did not recognize the paper type. If this does not help, use the following solution.

Solution 5. Check the presence of a suede paper

When trying to copy nothing happens

Use the following solutions to troubleshoot the problem. Decisions are given in descending order of the probability. If the first solution did not help to eliminate the problem, use the remaining solutions before eliminating the problem.

Solution 1. Make sure the device is enabled. Solution 2. Make sure the computer is turned on

Solution 3. Check the connection between the computer and the device

Solution 7. Wait until the device completes the execution of other tasks.

Solution 8. Make sure that the loaded paper is recognized by the Device Solution 9. Check the presence of a suede paper

Solution 1. Make sure the device is turned on

Solution: Look at the On button located on the device. If it does not shine, the device is turned off. Make sure that the power cord is securely connected to the device and electrical outlet. Press the ON button to turn on the device.

Cause: The device was turned off.

If this does not help, use the following solution.

Solution 2. Make sure the computer is enabled: Turn on the computer. Cause: The computer was not turned on. If this does not help, use the following solution.

Solution 3. Check the connection between the computer and the Device Solution: Check the connection between the computer and the device. Cause: There is no connection between the computer and the device. If this does not help, use the following solution.

Solution 4. Make sure the computer is installed on the computer. software Hp photosmart

Solution: Insert the device's installation CD and install the software.

Cause: The computer did not have the HP Photosmart software installed.

If this does not help, use the following solution.

Solution 5. Make sure the HP Photosmart program is running on the computer

Solution: Start the software and try scanning.

To determine if the software is running, right-click on the HP digital image processing icon on the right side of the Windows taskbar. Select a device from the list, then select Show Status.

Cause: HP Photosmart program has not been running on the computer. If this does not help, use the following solution.

Solution 6. Check the original load correctly

Solution: Place the original on the glass or in the document feeder tray.

If the original is loaded on the glass, place it the printed side down into the right front angle, as shown in the figure below. To copy the photo, place it so that the long side of the photo is located along the front edge of the glass.

When you boot the original in the document feeder tray, place the paper in the tray side to print upwards, as shown below. Place the page in the tray so that the top edge of the document first was loaded.

Do not upload photos to the document feeder tray for copying. When copying the photo, place it on the exposure glass.

Cause: The original was incorrectly placed on the glass or in the document feeder tray.

If this does not help, use the following solution.

Solution 7. Wait until the device completes the execution of other tasks Solution: Check the indicator on .. If it flashes, the device is busy.

If the device performs another operation, such as printing or scanning, copying will be suspended until the device completes the current operation.

Cause: The device was occupied by another task. If this does not help, use the following solution.

Decision 8. Make sure that the loaded paper is recognized by the device.

Solution: Do not use the device to copy to envelopes or other types of paper that are not supported by the device.

Cause: The device did not recognize the type of loaded paper. If this does not help, use the following solution.

Solution 9. Check out the presence of a suede paper.

Solution: Eliminate paper jams and remove the scraps of the paper left in the device.

Remove all paper clips and clamps from the original document. Cause: Paper was jammed in the device.

Incomplete mapping or trim parts of the original

Solution: Place the original on the glass or in the document feeder tray.

Do not upload photos to the document feeder tray for copying. When copying the photo, place it on the exposure glass.

Cause: The original was incorrectly placed on the glass or in the document feeder tray.

Function in the page size works with failures

On the HP PhotoSmart Premium Fax C309B Series device, the page size is not available from the control panel.

Solution 1. Perform scanning, Increase the image and type a copy

Solution: The function in the page size allows you to increase the original only to the maximum value (as a percentage) available for the model used. For example, on the model used maximum value Maybe 200%. An increase in the photo of a passport by 200% may be insufficient to make the photo from occupied the entire page.

If you want to make a big copy from a small original, scan it on the computer, change the image size in the HP scanning program, and then print a copy of the enlarged image.

Cause: Attempt to increase the size of too small original. If this does not help, use the following solution.

Solution 2. Make sure the original is properly placed on the glass.

Solution: Download the original on the glass in the right front angle side for printing downwards, as shown below.

The function in the page size does not allow the use of the document feeder tray. To use the function in the page size, you need to put the original in the right front angle on the glass printed side.

Cause: The original was incorrectly placed on the glass or in the document feeder tray.

If this does not help, use the following solution.

Solution 3. Wipe the glass and the opposite direction of the cover for documents

Solution: Turn off the device, unplug the power cord. Then wipe the glass and the substrate cover for documents with a soft cloth.

Cause: Small particles could be accumulated on glass or substrate for documents. The device recognizes everything that is on the glass as part of the image.

Empty print

Solution: Place the original on the glass or in the document feeder tray.

Do not upload photos to the document feeder tray for copying. When copying the photo, place it on the exposure glass.

Cause: The original was incorrectly placed on the glass or in the document feeder tray.

Modern printers have advanced service capabilities and allow you to control a number of parameters of use. This is due to the fact that the device not only executes copies print commands, but also controls the execution of functions to which MFP is calculated. For example, in some cases you can see the message that the scanner driver will be closed. This is due to the overflow of the stack of memory and internal system error. You can correct the error to reset the parameters.

Service mode what it is

The simplest option for zeroing the cache will turn off. IN some cases Clear the parameters will have through the service mode. How and what to do in this case? Service mode is a job with the built-in service programsthat will help you configure or restore the work of the printer.

It is usually closed for a user, and it is necessary to press the key combination. It may differ depending on the model, it is best to refer to the instruction manual. In some devices, some sections are closed to the owner, only service engineers of dealer centers can go to them. This information can be found on the Internet.

Maintenance complex B. service mode It is related to the fact that both the scanner and the copier are also. In some cases, there are malfunctions and errors, for example, when the scanner did not fulfill the task and did not cleanse the cache, but it turned out that the printer is busy. When possible - in some cases when installing too big permission scan.

The printer can be busy when an error of sending print jobs occurred. It is required to check not just a state, but queue printing, update service settings, reset the cache itself, even rearrange the driver. A part can be made from the computer program interface, part directly from the device keypad using the display. Check the status if the printer is busy or an error occurred.

What to do in case of failures? There are two options, contact the service or try to solve the problem yourself. For example, the message "Code 2.140.21 error occurred" indicates problems with a color cartridge, it can be fixed only through the service mode. If it gives out that is busy.

Try go to service mode:

turn off the power;
disconnect the cord;
press ON / OFF, turn on by holding the keys;
hold down the keys, click Stop / Reset 5 times.

After that, many disabled features when a failure occurred should earn. For example, a scanner without printer cartridges.

We update the parameters when the failure occurred

If it does not print and busy, a failure occurred. It can be coated in the service mode, where you can also check the status, reset the settings. In all such cases, knowledge of a malfunction that occurred and is issued on the display. As written, Code 2.140.21 is associated with the removal or wear of the cartridge, there may be other messages.

What you want to do when "Printer is busy":

remove the cartridge;
wipe contacts, including on the carriage;
if it does not help, replace the cartridge;
look at the monitor, what kind of cartridge module you do not work.

Note that it often defines the correctness of the cartridge. It shows that both are not working, in fact, the replacement requires only one. With this, the Code 2.140.21 fault is often associated with this, you can check by alternately replacement.