It often happens that it is not necessary to enter a password each time you Windows startup 10. For example, you have home computer or a laptop, and you are sure that no one except you and your close relatives (who already know the password) will be able to use the device. And you want your Windows 10 to start right up to your desktop when you start your computer, without the hassle of having to enter a password.

If you are sure that you definitely do not need a password when logging in, then I will tell you step by step with pictures, how to disable password entry when logging in windows 10.

In Windows 10, this is done in the same way as in previous versions this operating system Microsoft: "seven" and "eight".

To start, hold down the Win key (this is the system Windows key on the keyboard, usually located between the left Ctrl and Alt), you must press the Latin letter R.

In the Run window that opens, enter the command netplwiz and click OK.

In the opened window " Accounts users" we need to uncheck the box "Require username and password", and then save the changes by clicking OK.

At the last step, you will be asked to enter your password twice to confirm that you really want to disable password entry when logging in. Windows system 10.

That's all. Windows 10 will no longer require you to enter a password when you sign in. Your computer will start up by itself to the state of the desktop while you, for example, go about your business in the morning.

Note! Disabling password entry when booting Windows 10 may not turn off immediately, but only from the second reboot. That is, the next time you turn off and on the computer, you will have to enter the password. Perhaps this is a glitch of the operating system, or perhaps its additional protection.

Is it necessary to say that enable password entry at login in windows 10 possible in the same way.

P.S .: After the article was written, the following entry appeared in the comments below: After all the suggested actions, I rebooted twice; initially does not require a password, but if the beech cover is closed and opened again, it again asks for a password.» The question from the user of Windows 10 arose quite natural and fair. Therefore, I add here a way to cope with this task.

Until then we are with you. Disabled the password prompt when turning on or restarting the computer. And in this case (closing the laptop lid), the computer goes to sleep. The appearance of a password after exiting these states is determined by completely different parameters. And here's how to turn it off:

1. Get up in search string Taskbars (magnifying glass next to the Start menu)
2. Type the phrase " Login Options»
3. Run the found tool " Login Options» .
4. In the "Login Required" section, select " Never».

Or here's an even faster way:

1. Press Win + i
2. Select "Accounts".
3. In the left column "Login Options".
4. In the "Login required" section, set to "Never".

Thus, we are with you disabled password prompt in Windows 10 after waking up from sleep .

The Siri virtual assistant is famous for doing voice commands, but it can also be interacted with via messages.

By turning on the "Typing for Siri" function, you can chat with the assistant messages. Text command"set a timer for 5 minutes" will be performed exactly the same as the voice.

This option is part of Accessibility in Mac OS, just like in iOS.

How to writeSirimessages inMac OS

The feature is available in macOS High Sierra 10.13 and later.

1. Go to the  Apple menu and select " System settings».
2. Then select "Accessibility" and click "Siri" in the sidebar.
3. Check the box next to the "Enter text for Siri" option.
4. Close settings.

You can now send Siri commands as messages instead of speaking them out loud.

Siri is activated in the same way as before - by clicking on the icon in the upper right corner of the screen, by clicking on the icon in the dock, or by a key combination. But now you don't have to say the command out loud, you can enter it as text.

If you don't know what Siri can do, you can read. We also recommend reading about the virtual assistant.

Do not miss Apple news - subscribe to our Telegram channel, as well as to

Most modern phones have a typing feature using the T9 service. With it, you can make the likelihood of errors when typing is minimal. If the system is installed, then it will automatically select words based on the characters already entered and complete the phrases. Even if you make a mistake, she will be able to put the right letter.

But what if your phone or this function is not set by default? Do I need to additionally install some software on Flame, or can I configure everything directly on the phone without third party programs? Today we will figure out how to enable T9 on Meizu M3S, and other similar models from this manufacturer.

Easiest in this case work through the settings of your phone. More specifically, it is necessary to use the on-off T9. However, it should be understood that not all phones this function can be activated in this way. So, the algorithm of actions is as follows:

1. Go to the "Settings" menu.
2. Select the "Language and input" section.
3. Your machine's keyboard is displayed. In our case, the Meizu keyboard should be displayed.
4. We select this item, and in the tab that appears, click on "Smart input".
5. Here again a list of available options will appear, among which you must select "Mode T9".

By clicking on it, you can turn text input on or off using the smart prompt system.

Russian Keyboard app

On some firmware, there is no possibility of activating T9 at all. Then you need to use alternative and resort to installing an additional application. It is called Russian Keyboard. If you do not know how to install it, then we will help you figure it out.

1. We go to using our account information.
2. We enter the name "Russian Keyboard" in the search for applications.
3. We agree to download the application to your phone.

When the download is complete, go to "Settings", selecting "Language and keyboard" there. Then, by default, we set the use of the Russian Keyboard application. Next, we indicate the Russian keyboard in the "Input Methods" menu. Immediately after that, all texts will automatically be typed in this way.

Smart Keyboard app

One alternative to the T9 is the Smart Keyboard program. This is a great option if you've lost your T9 system but really want to use predictive text input. Moreover, here the dictionary is more extensive and there is more correct recognition of words during input. Yes, the app is faster.

The principle of operation in this case is exactly the same as in the previous case. Across Google Play download the program and install it. Through the settings, we set the Smart Key as the main program for entering text. Problems when typing text from that moment disappear once and for all.

How to disable T9?

Most Meizu phones allow quick turn on and shutdown T9. To do this, go to any of the applications where you need to enter text. For example, you can go to text messages.

Hold your finger on the input field for a few seconds, and the “Input Method” window will immediately pop up. One of the proposed options will be T9. Tap on it, you can both enable and disable the system.

The virtual (on-screen) keyboard is analogous to physical keyboard, which is being controlled. This article will show you how to enable the on-screen keyboard on Windows 7, 8, as well as how to configure, use and start it, disable it when the OS boots.

The keyboard on the computer screen is necessary in such cases:

1. missing physical device input.
2. The input device is not working properly or the keys are not working on it.
3. Health problems holding back from normal input

How to turn on the keyboard on the computer screen

The launch file of the virtual input device is located in the System32 folder of the Windows directory and is called osk.exe, from here you can call the virtual keyboard, but few people will use such actions. There are enough ways to enable the on-screen keyboard on Windows 7, 8. Let's look at each of them in more detail.

Enabling virtual input device in Windows 7:

To configure the input format and other settings, click the "Settings" button. Here you can change the following settings:

1. Acoustic confirmation - every press virtual keys will beep.
2. Enable numeric keypad - enables additional buttons on the right. With the help of it was made in the last article.
3. Keystrokes - sets the input by clicking the left mouse button.
4. Hovering over the keys - the character is entered when the mouse cursor is hovered over it, with the ability to select the hover duration.
5. Scanning keys - selection of a range of buttons in one line across the entire width, then after pressing the selection keys, scanning takes place over the selected line in a smaller range until the required button is pressed. You can set the scanning speed.
6. Text prediction - options allow you to suggest word options when typing the first letters and put a space after them.

After changing the parameters, do not forget to click OK.

I would also like to note that when you press Fn, the F1-F12 buttons appear in place of the numbers. When the numeric keypad is enabled, to access the numbers, press Num lock.

In Windows 7, 8, there are practically no differences in the on-screen keyboard, except that in the eight there are a number of additional buttons for improved control. These are the Nav (move), Mv Up (up), Mv Dn (down), Dock (pin), Fade (disappear) buttons.

So we looked at all the ways to enable the on-screen keyboard on Windows 7, 8, as well as the startup process, disabling its startup. The virtual input device fully mimics the actions of the buttons on a conventional keyboard and can be customized to suit your needs.

Keyboards in laptops come in two formats: with and without a numeric keypad. Most often, compact versions are built into devices with a small screen size, adjusting to the overall dimensions. In laptops with displays and larger device sizes, it is possible to add a Num-block to the keyboard, usually consisting of 17 keys. How to enable this additional block in order to use it?

Most often, the principle of turning this sector on and off is identical to conventional wired keyboards, but in some cases it may differ. And if you don’t have a right block with numbers at all, but you really need it, or for some reason Num Lock doesn’t work, for example, the mechanism itself was broken, we recommend using virtual keyboard. This standard application Windows, which is available in all versions of the operating system and emulates keystrokes by clicking the left mouse button. Use it to turn on Nam Lock and use the rest of the keys on the digital block. For information on how to find and run such a program in Windows, read the article at the link below.

Method 1: Num Lock Key

Key Num lock is designed to enable or disable the Num-keyboard.

Almost all laptops have a light indicator that displays its status. The lamp is on - numeric keypad works and you can use all its keys. If the indicator is off, you just need to click on Num lock to enable the block of these keys.

In devices without highlighting the state of the key, it remains to be guided by logic - if the numbers do not work, it remains to press Num lock to activate them.

It is usually not necessary to disable Num-keys, this is done for convenience and protection against accidental presses.

Method 2: Fn + F11 keyboard shortcut

Some laptop models do not have a separate digital block, there is only an option combined with the main keyboard. This option is truncated and consists only of numbers, while the full-fledged right block consists of 6 additional keys.

In this case, you will need to press the key combination Fn+F11 to switch to digital block keys. Reuse the same combination includes the main keyboard.

Please note that depending on the brand and model of the laptop, the keyboard shortcut may be slightly different: Fn+F9, Fn+F10 or Fn+F12. Do not press all combinations in a row, first look at the icon function key to see if it's responsible for something else, such as changing the brightness of the screen, Wi-Fi operation and etc.

Method 3: Changing the BIOS settings

In rare cases, the BIOS is responsible for the operation of the right block. The option to enable this keyboard should be enabled by default, but if the previous owner of the laptop, you or another person disabled it for some reason, you will need to go in and reactivate it.