This article describes how to set up cable Internet on your computer.
Many users use Wi-Fi at home to connect to the Internet, which is very convenient, especially if you have several devices (computer, tablet, smartphone). But it also happens that you need to connect your computer to the Internet directly through a cable, without using a router. In this case, a direct connection is established between your ISP and the PC network card (the Internet speed increases).
In addition, you may just need to connect your wired Internet to a new computer that you want to install at home. We will talk about all this in this review. All computers that run " Windows» ( 7, 8, 8.1, 10 ) will be configured in the same way, the instructions below will work for all of these cases.
To begin with, let's note some points. The Internet connection that providers provide to their users is usually divided into static and dynamic. Static connection is when you are given your permanent unchanged IP address. A dynamic connection automatically selects an IP for itself, which can change every time.
Many modern companies provide just such options when connecting to the Internet, but there are also providers that use a PPPoE connection, which requires a password and login. The provider offers to establish such connections by sending its masters to the clients. But this is often a long history, so we will learn how to connect cable Internet to a computer on our own.
Connecting the Internet to a computer via a cable using static and dynamic IP
In order to connect an Internet cable to a computer, as you know, it must be plugged into the Ethernet port on the rear panel. This creates a direct connection between the Internet provider and the computer's network card. Next, you will need to configure the connection in the operating system.
To configure the Internet in this way on your computer, you need to take the following steps:
- Through the menu " Start" go to " Control Panel»
How to install and configure the Internet on a new computer via a cable
- In the window that opens, go to the Network Control Center
How to install and configure the Internet on a new computer via a cable
- Next, in the left column, click on " Change adapter settings»
How to install and configure the Internet on a new computer via a cable
- You will be taken to the folder where all your Internet connections are available (if any, we will talk about how to create a new connection below). Right-click on the Ethernet connection, and in the window that opens, click on " Properties».
How to install and configure the Internet on a new computer via a cable
- The next step is to select the protocol with the mouse " IP version 4 (TCP / IPv4)»From the proposed list. Select it and click on " Properties».
How to install and configure the Internet on a new computer via a cable
- Now there is, as they say, the final touch. If you want to have an Internet connection with a static IP, then you will need to fill in the fields in the new window as shown in the screenshot. We show the default settings. The settings for your particular ISP may differ slightly. It's best for you to call him and ask what settings your provider offers.
How to install and configure the Internet on a new computer via a cable
- If you want to connect to the Internet with a dynamic IP, then in the new window that opens, do not touch anything. All settings will be set by the system automatically. Just click on " OK", And setting up the connection of the Internet cable to the computer can be considered complete.
How to install and configure the Internet on a new computer via a cable
How to install and configure the Internet via cable on a new computer?
If you want to create a connection from scratch, that is, for example, on a new computer, then in this manual we will explain how to set up such a connection. Physically, you just need to plug the Internet cable directly into your computer's NIC on the back panel.
- Again, we want to go to the control panel (in the screenshot we will show an alternative option)
How to install and configure the Internet on a new computer via a cable
How to install and configure the Internet on a new computer via a cable
- Then again we want to go to the control center of our networks
How to install and configure the Internet on a new computer via a cable
- After that, we select the connection setting, which can be wireless, modem, and VPN
How to install and configure the Internet on a new computer via a cable
- Next, in the new window, click on the uppermost option " Internet connection"And click" Further».
How to install and configure the Internet on a new computer via a cable
- Next, let's choose a high-speed Internet connection
How to install and configure the Internet on a new computer via a cable
- Now a window will open where you will need to fill in all the required fields. We put the checkboxes, as shown in the screenshot, and also enter your username and password that your Internet provider gave you. Naturally, with this password and login you will go to the Internet. Press " To plug».
How to install and configure the Internet on a new computer via a cable
- As a result, if you did everything correctly, then in the lower right corner of the screen on the taskbar you will see your connection icon.
How to install and configure the Internet on a new computer via a cable
