Configure byfly Internet. Connect to WiFi Beltelecom. Everyone is described here necessary settings For modem from Beltelecom: To work the modem in the router mode byfly - the Internet operates with a machine gun (without connecting via a shortcut), it is possible to connect several computers (laptops, telephones, tablets) - thus create a homemade wireless network, To configure a Wi-Fi connection where the access point is the modem itself.
To configure, we need a good computer, a laptop, a netbook, without viruses, a modem (it is a router and a Wi-Fi access point) Promscape and a network cable (comes in the kit), connected Online service by Fly.
Description of the Modems Connection, D-Link Access Points, ZyXEL, Modem Control Modem Communication M -101A in the BYFLY router mode - are not considered in this article.
To configure Byfly Internet and Connecting on Wi -Fi It is necessary:
- Connect the cable to the network port of the computer (laptop) 2 or 3 port modem.
- Turn on the power in the computer, laptop and modem. Wait to fully download the system on the computer and initialization of the modem - router.
- It is advisable to remove the old antivirus (especially if not updated - can block). Sometimes you have to install Windows again, since the main problem is often not a modem, but the involved computer, and the Internet does not work, it works slowly and with cliffs precisely because of this.
- Run the Opera, IE browser.
- In the address bar, we enter (without spaces) of the number: 192.168.1.1 (this is the address of our modem byfly on the network).
- Click Enter.
We enter in both windows (password and user): admin (5 letters in English).
We fall into the modem interface.
Click the Interface Setup tab. Let's get on the Interface Setup tab and the Internet Return.
Everything should be like in the picture below.
You need to change the fields: Username (in the Beltelecom contract - user), Password (in the contract it is a password) and Bridge Inteface. We check the presence of active Checkbox Default Route at the YES position.
Click Save.
Click the LAN tab. Here you can change anything ( DNS Server Run automatically!)
Or as in the picture for the city of Minsk. We translate DNS Relay to the Used User DesCovered DNS state (use the user defined DNS servers, indicate for your region, in Figure DNS by Fly for Minsk.)
If you changed SAVE.
If you use a modem as a wired router (i.e., you do not need W-Fi) Further configure by Fly Internet Not required, it is also undesirable. Activation of Wi-Fi module in the modemia will make the device with a source of radio interference, electromagnetic radiation (not good for health), "Black Door" for an attacker.
Click the Wireless tab. This is a setup wireless connection Wi-Fi for Fly.
We only change what is indicated by the arrows in the picture.
Activate the Wi-Fi module in the router (the default can be disabled - menu items are not active).
As a rule, you must in the Access Point Settings menu, put the point to the Activated position.
Be sure to change the PRE-SHARED KEY item. This is your password to enter your wi-Fi Network. For convenience, change the SSID is the name of your network, make it unique to find out. Name it (for example) Bigman ( english layout obligatory), or in its own way.
Click Save.
The modem is ready for operation. Turn the power cable from the computer (laptop) to check wi-Fi works (if it's necessary).
We turn on the Wi-Fi map on the laptop - we are looking for a network (as prescribed in SSID). Click to connect, enter the password that you entered when setting up in Pre-Shared Key.
Everything should earn. If the computer or laptop does not displays the network, you may not be installed as a network card driver, or there are other malfunctions.
Thus, our wireless network, as well as through the cable, you can connect a sufficient number of devices at the same time, which will work with the Internet without interfering with each other.
Hello everyone! Literally a month ago, I had a big joy, I finally connected me the Internet using GPON technology, that is, fiber. Of course, this is a serious event for any computer guy, as there are completely different features and speeds.
But after the first emotions, naturally, I wanted to optimize the new equipment under my beloved, so the nearest series of articles will sound like this - the right configure the BYFLY router. And we will consider everything on the example of the model of the MT-PON-AT-4 terminal.
After all, it is at the initial start that the router and the new telephone numberwhich you definitely get when you go with the old on the modern GPON. Therefore, there is no particular sense to describe in detail the diagram of the physical connection of cables, consider themselves everything after the departure of the wizard.
Better let's consider in detail the input in the modem and the settings themselves. Specifically, we'll figure it out in this article, where you need to prescribe the name and login in order to be possible, in general, go to the network. That is, now we will disassemble the mode of operation called Router.(router).
So, so that everything happens for sure, let's now connect the computer to the router itself from Byfly using a power cable. Here the main thing is to remember that only "LAN1 -LAN3" connectors are involved by default.
The thing is that the fourth port (LAN4) is initially assigned to the needs of Zala television and therefore it is useless to connect to it. And to understand where what number, you need to pay attention to the appropriate labeling on the case of the device.
The parameters of the network card of the computer when the first connection is recommended to set to automatically obtain IP addresses. In more detail about this, I told you in the article about the organization. After that, we open any browser on the PC and drive the value in the address bar. " 192.168.100.1 "Without quotes .
The MT-PON-AT-4 modem authorization window opens. Standard login (username) and password (password) is the word " admin." without quavichek. After entering it, we get into the administrative part of the router and immediately move on the way " NETWORK-WAN-WAN Connection " .
Then in the grade " Connection Name. " You should select an entry with the name "omci_ipv4_ppoe" view. Key fragment here is a prefix " pPOe" . It is she who suggests that this is an account connection account to the Internet in Bridge mode.
It remains only in graphs " UserName. " and " Password. " Enter data from the contract for subscription service. I draw your attention, do not confuse these login and password with those that we entered when entering the modem. This is the root of different parameters.
In this case, the login will be like " [email protected]."Where X is your specific values \u200b\u200bfrom the contract that you have signed at the BYFLY Customer Service Point when they parted with their blood for the arrival of the master to your home to connect. 
Well, in general, and all things. The remaining parameters can be left unchanged, everything must work and so. It remains only to descend at the bottom of the window with the settings and click the button. " Modify. " To save changes. on more readable. In this will help us " New Connection Name. " . And of course, do not forget at the end of the button " Modify. " .
At this step, friends, the article comes to completion. If some questions remained, boldly ask them in the comments. We will solve the painful questions together. And in conclusion, as always, let's watch a very interesting video.
Instructions with pictures:
1. Press Start Control Panel
2. Choose Network and Internet
3. Choose Network and Shared Access Control Center
4. Choose Change adapter settings
5. Press the right button on the wireless connection, select Connection / Disconnection
6. On the required network, press the mouse and choose Connection
7. In the window that appears, enter the network key
8. On a wireless connection, press the right mouse button and choose Properties
9. Choose the Internet Protocol TCP / IP.V4.and click Properties
10. We prescribe a network card settings
In the IP address line, enter the value 192.168.1.10, in the subnet mask string - value 255.255.255.0, in the line the main gateway - the value of 192.168.1.254 (for Billion modems), or 192.168.1.1 (for other modems)
Select Use the following DNS servers addresses and enter the IP addresses of the primary and secondary DNS servers (the list of their values \u200b\u200bis given in)
Press OK
Connect to Wi-Fi is configured.
If you want to delete the network.
Hello, friends! In this article, I will give you an answer to the question - how to set up WiFi on Byfly? After all, using a router at home you can go online immediately from several computers or devices support WiFi technology. Undoubtedly, it is very convenient and will save you from forever interfering Internet cables under your feet. In this article, consider the ZTE modem and the M200A promsmound.
WiFi setup on Byfly starts with connecting the cable to your modem and computer. To do this, take the wire, which was complete with a modem and connect one end to network card Computer, and the other in the LAN port on the modem. Just do not confuse it with the ADSL port, it will not fit there anyway.
Go to the modem interface
The basic setting of the BYFLY router begins from entering the modem interface. To do this, unlock any Internet browser (Opera, GC, IE, MF, Safari) and in the address line, located at the top, drive the following - 192.168.1.1 and press input (ENTER). A request to enter the user name and password appear. Enter the username of the admin and password as admin. And you get into the modem interface.
Configure Internet
And at the end, the WiFi configuration on Byfly moved to the main point - the configuration of the Internet connection. And so proceed, click the "Interface Setup" tab and immediately go to the "Internet" submenu. In Encapsulation item, set a point in PPPOA / PPPOE and select "PPPOE LLC". Next, you need to enter your Internet connection data. In the "User Name" field, we introduce your name under the contract. And in the Password field, you also enter your password on the Internet. We put the point in the Bridge Inteface paragraph on Activated. Check whether the point is on the "Default Route" paragraph on the YES option. Press the "Save" button.
Setting up a local network
In principle, settings local network You can not change, or how to set both in the picture and enter the DNS of your city (on the example are shown for the city of Minsk). Change the settings do not forget to save by pressing the "Save" button.
Setting up a wireless network
WiFi configuration on Byfly moves to the final item, namely to setting up a wireless network. To do this, go to the Wireless tab. First, activate Wi-Fi on the router (by default it can be disabled). In the Access Point Settings item to put a point in the Activated version. In the "Pre-Shared Key" field, enter the password inserted into the Wi-Fi network. We invent and prescribe the network name in the "SSID" field (the English layout is required. We click the "Save" button.
I hope that I was able to answer the question in the most detail - how to configure WiFi on Byfly. I think this becomes you become more experienced and raise your knowledge level in the area computer literacy and network.
The method of setting up your home wi-fi depends on the selected equipment. The wireless network is organized by one of two methods: direct connection of the telephone cable to Wi-Fi router With support for ADSL or serial modem and conventional router.
Configure by Specialist Byflay
BYFLY Provider provides free settings Wi-Fi Router When connected. It is performed by the company's specialists, with departure to the client. Under the terms of the contract, this setting is made only once. If in the future the parameters of the router will be reset or needed to be changed, you can order paid service By setting up Wi-Fi.
Note! If necessary, the client device is provided by the users of Baiflai for rent, without additional charge.
Wi-Fi Access Cards
Byfly has developed a prepaid access system for using a wireless network in public places. After authorization at any point of the Baiflay on the territory of Belarus, the login page will open in the browser. If you have already bought a wi-fi card, erase the protective coating on the reverse side. Login and password that are under it, enter in the "Authorization" section.
Access to Wi-Fi can also be obtained without the presence of a physical map of Baiflai. At the same time, 15 minutes of using wireless Internet are provided free of charge. Pay large quantity You can on the same page, with help bank card. To do this enter the number mobile phone In the text field on the right and select the desired time.
Tip! Avoid errors when entering the phone number. If you pay a Wi-Fi plastic card, details for connecting to ByFly will be sent to SMS to the specified number.
Educational video: how to configure Wi-Fi by Byfly
Self-configuration of the Wi-Fi Router
Divide the paved telephone line using an ADSL filter (splitter). Such adapters are usually included in the delivery of modems and ADSL routers. They allow you to separate the transmission frequencies byfly and voice communication data. The filter outputs are labeled, for example, "Modem" and "Phone". Connect the devices to the appropriate connectors.
If the BYFLY provider is provided by an ADSL router, connect the filter cable and router. Connect the device to the computer via the Ethernet output. When using a separate modem and Wi-Fi router, connect the devices in the following sequence:
- Insert the telephone cable connected to the splitter in the "LINE" connector on the modem.
- Connect the UTP Cable Modem and Router. On the router, use a separate connector, which is usually indicated in blue.
- Connect the router to the computer through any of the remaining ports.
Turn on the equipment into the outlet and go to the control panel through any browser. The entry address to the web interface is indicated on the sticker or in the instructions for the router. The data is placed there accountdefault. Enter the username and password in the authorization window.
The menu path to configure the Wi-Fi depends on the model used. On the popular ADSL router D-Link DSL-2640U, you can configure the wireless network for Baiflai in the "Wireless" section. On the Basic tab, make sure that the Enable Wireless item is active (marked with a check mark). If you want to make a hidden Wi-Fi network, select the Hide Access Point check box. In the "SSID" field, enter the desired name.
