In our progressive time it is difficult to meet a person who would not have mobile phone. Even sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, watching videos and more. Often, the owner, who wants to have a phone always at hand, wants to place it convenient way. The stores offer various expensive holders, but from our article you will find out what you can do

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's look at how to make a phone stand from these devices. To create a strong holder, you can use 1, 2, 3 and even large quantity binders. Some craftsmen assemble three-dimensional structures from a variety of clips of various sizes. But such coasters look bulky, and they are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder slightly towards the phone located on it. Even one piece with a folded lug will be enough to support the mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as if into grooves. To keep the clips stable, clamp a small piece of cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this design, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that it is necessary to fasten two pencils with an elastic band, and stick the third between the turns. It is advised to use pencils with an elastic at the end to prevent slipping on the table and a stronger grip on the phone.

bottle models

In the household, we use a variety of cleaning and detergent products. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. It can be a container for shampoo, shower gel, cleanser and more. Take a bottle twice as long as your phone. Cut off the neck and part of the container on one side approximately to the middle. All sizes are relative - measure at your discretion. On the opposite area of ​​the bottle, cut a hole that matches the parameters charger. You should end up with a piece that looks like a handbag or a pocket with a handle. Put the phone in the stand and connect the adapter to the network through the hole. Your mobile communication device will not lie on the floor, and the risk of crushing it will disappear. You learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or cloth.

paper clips

The simplest and most affordable stand option is an ordinary metal paper clip. It must be unfolded into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design perfectly holds the mobile phone without interfering with watching the video at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a strip measuring 10 x 20 cm. Then you need to fold it in half along the short sections. Next, draw a shape as shown in the photo below. The fold line must remain intact. Opening the detail, you will see that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. To make such a device at home is very simple. Step back from the edge of the card 1 cm and bend the part along the short side. Bend the rest of the card in half in the opposite direction. You will get a zigzag shape. Place the phone on the formed ledge. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned upside down, which, in turn, must be crossed. Mobile device is located between the frame of the frame and the temples that hold the phone.

How to make a phone stand from a children's designer? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of various shapes. The stand made of parts can hold the phone both vertically and in horizontal position. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another one interesting detail, which will help keep the phone upright - the old cassette. It must be opened and the lid folded back, thereby turning the box inside out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent, does not interfere with the use of the phone. In addition, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.

In the article you will find tips on making your own stand for a mobile phone or smartphone.

Introduce modern man without a smartphone or phone is simply impossible. This gadget is very closely connected with the daily life of both youth and adults.

Today, the telephone is not just a device for telephone communication. This is an organizer, messenger, graphic editor, TV, game console and music player.

For convenient use of smartphones (which are both compact and very large), a lot of stands and holders have been invented that comfortably position the gadget horizontally, vertically, help organize and keep its accessories in one place: charger, headphones, cords and more.

If you don't want to spend money and time looking for the perfect stand for your smartphone, you can make your own! This requires only a little of your imagination, desire, a modicum of creativity and some improvised materials.

INTERESTING: What coasters are not made of! In the course is the office, building materials, packaging from products, goods, toys and even garbage!

Types of homemade stands for smartphones:

Pillow - a stand for the phone, sewn with your own hands

How to make a phone stand with your own hands from cardboard, paper?

The most popular material for creating a phone stand is paper or cardboard, which anyone can easily find. Of course, it is best to use high-quality and thick cardboard so that the stand is reliable and strong. However, the strength of the stand also depends on the weight of the phone: the lighter it is, the easier it is to hold.

Stand options:

• From a bushing. The sleeve is the cardboard base of the roll, on which toilet paper or paper kitchen towels are wound layer by layer. For a stand, you need a third of a towel roll or one small toilet paper roll. Also stock up on push pins. Make a horizontal slot in the sleeve on one side so that the phone fits into it. The legs of the stand should be made of buttons.
• From cardboard. Any thick cardboard (packaging, for example) will come in handy. A long wide strip of cardboard should be folded into a triangle and secured on one side by making a slot. You can fix the cardboard with glue or pushpins. The stronger the cardboard, the more weight of the smartphone it will withstand. The width of the cardboard strip should be slightly larger than the width of the phone.
• Origami stand. This is a simple paper device, of course, disposable. However, it can help you out in the most uncomfortable situations. Having instructions and paper folding procedure, you can easily make a stand in a few minutes.

Video: Paper phone stand

How to make a do-it-yourself phone stand from wood, plywood?

A small wooden plank or piece of plywood will come in handy in order to make a phone stand: practical, simple, very comfortable, durable.

Of course, to work with wood, you must have the art of sawing with a jigsaw. Nevertheless, such coasters are very durable and will be able to please you with their practicality more than once. There are many ideas and forms of coasters that you can create yourself and it all depends on your imagination.

Materials for work:

• Block of wood or plank
• Sandpaper
• jigsaw

• First choose your favorite design
• Then, following the template, cut out the shape
• Sand the sharp edges of the wood with sandpaper
• Open with varnish

IMPORTANT: Plywood is much easier to work with, but it should also be cut with a jigsaw or saw. Unlike wood, it can not be varnished, but painted with acrylic paints.

Types of stands made of wood:

Video: Wooden phone stand

How to make a do-it-yourself phone stand from a metal clip, clips?

It turns out that in order to make a practical, and most importantly, a stand that really holds the phone, expensive materials and many hours of time are not required. Inventive gadget owners come up with new coasters, both durable and disposable.

You can “figure out” a strong stand for a small smartphone from stationery paper clips (the larger, the better). To do this, they should be fastened in a certain order (see the diagram and video below).

If you don’t have stationery clips at hand now, you will need an ordinary paper clip (of course, also a large one, because a small one cannot afford to hold a mobile phone). The secret of such a stand is in the correct twisting. This should be done in such a way that the weight of the gadget is easily and evenly distributed on the paperclip (how to fold the paperclip, see the photo and video below).

Video: Simple paper clip phone stand

How to make a phone stand with your own hands from improvised materials?

Some improvised materials that you seem to already want to throw out can be very useful to you if you decide to make homemade stand for phone.

For example, a plastic card. It may be ordinary Discount card from a store (unnecessary or one that you don’t use) or an old credit card with an expired date. This plastic is strong enough that all you need to do is just fold the card in such a way that you get the right curves to hold the gadget in a vertical or horizontal position.

INTERESTING: Of course, you can dream up cutting out a certain figure from a plastic card for a more stable position on the surface, but not all cards lend themselves to scissors.

On the other hand, a plastic bottle is always at hand and it is always cut. Using diagrams, photos or your own ideas in your head, you can cut out a stand of any complexity, the main thing is to want. Then it is quite possible to paint this blank with paints as desired.

INTERESTING: Do you keep old cassette boxes? These simple plastic boxes in position offer you a ready made stand.

Video: Plastic card stand for smartphone

DIY music phone stand

Have you ever thought about the fact that sometimes you really want to have a powerful stereo system for your smartphone or a convenient delivery in order to comfortably watch movies in the evenings? There is an exit! You can make any stand, holder, stereo system or “dummy cinema” with your own hands.

For example, a wide sleeve from kitchen towels or any cardboard tube will at times amplify the sound of the smartphone speakers located below and bring it out in different directions. The same effect can be achieved by attaching paper cups on both sides.

Types of "acoustic" stands:

Video: Phone stand with speakers

DIY movie phone stand

The effect of "cinema" can be easily made from the most ordinary cardboard box:

• Cut a hole for your smartphone
• Cut out a hole for your head (to watch movies on your phone while lying on your back)
• Make acoustics (if you wish) from cups (see the video below)

Video: Home cinema: phone stand

Now it is difficult to find a person without a mobile phone, which has become an integral part of our modern life. And every phone requires regular charging from the network. When all family members charge their mobile phones and gadgets, it seems that the room is entangled with numerous wires that often get tangled and get in the way. Savvy craftsmen came up with a holder for charging the phone especially for such cases and shared with the world how to make it with their own hands!

In such a case, both a smartphone and a wire, and a bright one, will fit. appearance looks much nicer, more aesthetic and more modern than just a phone lying on the floor. A holder for charging the phone was made from a bottle of Johnson`s cosmetics, pasted over with a colorful paper napkin using decoupage technique.

How to make a DIY phone charger holder?

Everything is very simple. We find a suitable plastic container. Johnson`s products are perfect for the holder due to the elongated oval shape. We outline the outlines of the future cover with a pen and cut the workpiece with sharp scissors or a knife.

A cut bottle will be easier to wash and clean from cosmetic residues. Make sure the inner surface is not greasy. In the protruding part of the holder, cut a hole suitable for the plug of your charger. Then carefully sand the entire surface of the bottle and the edges with sandpaper.

You can decorate the holder with anything, not only decoupage napkins. You can try to paint it with acrylics, wrap it with threads, stick ribbons and beads, pebbles, twigs and shells - let your imagination run wild! If you decide to follow this example, then prepare a bright paper napkin, decoupage glue and a sponge (brush).

Carefully cover the bottle with a napkin, outer part also covered with glue (or varnish).

Smartphones in modern world replace many familiar items a few years ago. Player, clock, navigator, voice recorder, mini-cinema - one gadget contains a maximum of useful functionality. If earlier this device was in the bag most of the time, then with the advent of additional features it has migrated to the desktop. How to make a phone stand with your own hands and what materials are preferable to use, read on.

Varieties of models

Age of development information technologies dictates its own rules. Mobile have become so indispensable that people almost never let go of them. With the increasing importance of this device, the telephone stand has its own advantages. First, she organizes life. Secondly, it disaccustoms to constantly keep the phone with you.

Popular types:

Stand from stationery binders

Prices for phone stands

Phone stands

Step by step instructions for making

Since many technologies have been developed to create this organizer, we suggest that you familiarize yourself with the most popular ones. It only takes a few hours to create the stand. The product is reasonably priced. In most cases, all the necessary materials are at hand.

paper origami

Miniature easel

It is a classic telephone stand, similar in appearance to the holder for the stretcher.

• mini easel;
• pencil;
• decorations;
• sticks for needlework made of wood;
• tassel;
• glue;
• Mod Podge;
• acrylic paints.

Prices for artistic acrylic paints

Artistic acrylic paints

To process the product, you will need sanding paper with a fine grit.

Binder stand

Stationery is one of the most best options to make an organizer.

Required materials and tools:

• 2 large metal or plastic staples;
• 1 staple medium size;
• scissors;
• colored tape.

Color-dyed BOPP tape is available at any stationery store.

Sequencing:

Video - A lesson on making a deck chair for your phone

panda stand

An original product, especially relevant for children. For all its utility, it is a cute toy.

• 12 oval cardboard blanks;
• 1 pair of fluffy white 1 pair of black socks;
• blush;
• cotton wool;
• glue.

Terry socks are suitable for this device. They are hypoallergenic because they are 100% cotton. The difference from cotton is only in the technology of weaving fibers.

Step 1. Cut out 12 oval elements from cardboard paper and divide them into 3 groups with an equal number of shapes. Take 1 stack and on one of the details trace the outlines of the bottom of the smartphone, including the hole for the charging cable. Cut out according to the markup. Using this template, do the same with the remaining 3 sheets and glue the 4 pieces together.

Step 2 The second group of cardboard ovals is designed to decorate the part of the phone in which the wire is located.

Step 3 Set aside from the 2 remaining groups of 1 detail. Glue the rest to the workpiece.

Step 4 Fix cotton wool on unused elements. Cut a white sock and glue it to the fluffy mass.

Step 5 Glue half of the black sock on the main part of the product.

Step 6 To decorate the ears, cut out 2 ovals, glue them with cotton wool and decorate with a black sock. For the eyes, cut out 2 semicircles and decorate with a black sock.

Step 7 Glue all the details together. At the back, fix the deferred white part. If desired, a ponytail can be made from a sock and cotton wool. Decorate cheeks with blush.

Glue gun prices

glue gun

Video - Panda phone stand. Master Class

Oak plank stand

Required tools and materials:

• oak planks;
• yardstick;
• glue;
• clamps;
• fine sandpaper;
• mineral oil;
• miter and circular saw;
• marker;
• saw stand;
• belt sander.

You will also need a planer-thickness machine for the initial and final grinding of wooden surfaces.

Step 1. Fit the parts in thickness, trim and cut to width.

Step 2 Glue 4 pieces together.

Step 3 Process the workpiece with a planer-thickness machine and cut.

Step 4 Divide one of the resulting elements, glue into a bar and trim.

Step 5 Glue the blanks together.

Step 6 After the glue dries, sand the product and cut off the support bar at an angle.

Step 7 Finish the edges with sandpaper and coat the stand with mineral oil.

wooden organizer

Design feature - shelves for placing smartphones are located horizontally. Externally, the product is a vertically directed box with a closed front wall. Although this part increases material consumption, it ensures the safe storage of the phone.

The stand is assembled from a sawn plate with the help of euro screws. Using a hot iron, the end parts are closed with a self-adhesive edge. The bottom can be made from cheaper raw materials. If the base of the previous model was taken from improvised materials, then for this stand it must be purchased.

Step 1. Material selection

Table 1. Analysis of the timber products in demand for the manufacture of organizers

Variety	Characteristic
	A popular material for making various home organizers. In view of the fact that the minimum thickness of commercially available boards is from 20 to 25 mm, this is not the best choice. Given the miniature design, to create it, you will need boards with a thickness of 12 to 15 mm. Otherwise, the stand will look bulky. It is possible to reduce parts to the desired size only with the help of professional equipment, for example, a planer-thickness machine.
	A multi-layer board produced by gluing pre-finished veneer.
	It is a sheathing board made of natural wood.
	The optimal choice. Timber made from several layers of small particles of wood bonded together with synthetic resins. Made from high quality chipboard.

Due to the specifics of the production technology, laminated chipboard has a number of advantages over the raw materials listed in the table. This applies to good aesthetic qualities and environmental cleanliness.

Basic properties:

Step 2. Prepare tools and equipment

Required tools:

1. Jigsaw. Hand held device equipped with a replaceable saw blade. Designed for sawing thin boards and plywood.
2. Files. Steel blade mounted in a jigsaw.
3. Drill. Cutting device, the principle of operation of which is based on rotational movement. Used to create holes.
4. Skin. Paper strewn with broken glass or emery. It differs in the degree of granularity.
5. Confirmat (Euroscrew). Fastener, which is a rod with an external thread and a head. Forms an internal carved pattern in the recess of the attached part. In addition to them, wooden dowels are needed.
6. Drill. An electric or hand tool manufactured for fast hole making.

In addition to the above, you will need a self-adhesive furniture edge, an iron and glue.

- this is a great and easy to implement way to decorate your home, make the interior truly unique. Even such crafts can become an original gift for loved ones, and if children are involved in the process, then the lesson will become a true field for creativity!

Step 3: Familiarize yourself with the safety rules

Before you start making a stand, you need to familiarize yourself with the basics of carpentry work:

1. Wear work camouflage.
2. Prepare a place to create a product.
3. Firmly fix the saw table to the workbench.
4. Check each tool for serviceability.
5. Firmly insert a file into the frame of a manual jigsaw.
6. In the process of work, you can not bend low over the workpiece or make sudden movements with the toolkit.
7. Devices with pointed tails should be equipped with wooden handles.
8. It is forbidden to be distracted during the performance of work.

Step 4: Cut and assemble

Video - How to make a phone stand. 7 easy ways