If you do not work the speaker on iPhone - he completely broke or scrolls and rattles during the conversation - it is not necessary to immediately go to the service center. First you need to try to find the cause of the problem and eliminate the malfunction at home.
What could be the reason for breakdown
Problems with the sound of spoken (upper) and lower (polyphonic) speakers are quite common. The main causes of faults:
- moisture getting due to the fall of the smartphone in the snow or flooding with liquid (tea, coffee, juice, water)
- mechanical impacts (blows, drops on a solid surface), causing damage to the internal parts (loop, "ear sensor", microphone, anterior chamber or other)
- dust and small garbage in the dynamic or headphone jack
- failures in the work of software (especially if you install on the phone "Left" programs)
- poorly configured volume
- manufacturing defects
Problems can manifest themselves in different ways: poorly audible when talking the interlocutor, the speaker iPhone rattles and scrolls or stop working at all.
Eliminate a malfunction on your own
If you stop you hear the interlocutor or it says very quietly, start from checking the equalizer settings. First, adjust the volume during the call, making sure that the indicator is displayed on the screen. Make sure that foreign devices are not connected to the phone connectors. Insert several times and remove the headphone plug. Disconnect the bluetooth function.
To exclude the possibility of a software problem, you should delete a new, recently installed software, and also reset all settings. Algorithm of hard reboot device:
- at the same time press the "Home" and "Power" buttons
- hold 10-15 seconds
- wait to reboot Gadget
If the speaker still does not work on the iPhone (conversational or lower), restore the saved copy of the system using the ITYUNS. Do not forget to update the iOS regularly to the latest version.
Also often helps simple cleaning of auditory and polyphonic speakers from dust. Before performing the procedure, remove the cover and a film from the back and front panel, then use a softer pile brush, slightly moistened with alcohol or purified gasoline.
If you suspect a factory marriage, immediately carry the iPhone to an authorized service center or Apple seller - they should change the internal details of your model for free. Remember - when installing non-license ignition software and inaccurate circulation, warranty conditions are violated. Therefore, if you are dropped or flooded with a smartphone and damaged the speaker (auditory, voice), do not waste time on the trips. It is much easier to call an experienced master to the house.
Where to seek help
If you have problems with the microphone (located at the bottom on the left side) or speaker (upper, conversational), save time and strength - find the wizard on the site site. UADA's performers will find and eliminate the breakdown if you faced the following situations:
- the speaker does not work well - the worst of the interlocutor during the call it became after the moisture drops or mechanical damage
- rattling sound (when communicating through a voice speaker, during the inclusion of speakerphone)
- the sound does not scroll and can't tremble - there is no
Each YouDo performer has been working for many years, has great diagnostic experience and. Other advantages of performers.
Iphone 6, iPhone 5S, iPhone 5, iPhone 6S, iPhone SE, iPhone 4S, iPhone 4, iPhone 7 Plus, iPhone X, iPhone 7, iPhone 2G, iPhone 8, like others there are 2 speakers: upper and lower and sometimes It happens that 1 speaker does not work, and the second works.
At the same time, if one speaker does not work (auditory), that is, the spoken, and the loud connection or external (headphones) can work.
There are several reasons and most usually manage to eliminate themselves without visiting specialized places.
If the speakers have stopped working at once, the situation is complicated, but it is often amenable to an independent decision.
It also happens that the speaker during the conversation works quietly or bad, for example, scrolls - this situation will also consider below.
Sometimes it is even necessary to climb inside iPhone 5, iPhone 6, iPhone 5S, iPhone 4, iPhone 4S, iPhone 7, iPhone 8, iPhone SE, iPhone 5C, iPhone 6 plus and so on, but I hope you will bypass such a future.
Note: You will not believe, but there is an application that can actually restore the performance of the speakers on the iPhone. I recommend to try.
The reason is the first why the speakers do not work on iPhone - it is just turned off
In the Apple devices there is an almost imperceptible button on the housing and it can be inadvertently hooked - it turns off the sound (see the picture above).
What to do? Just move the button to another position (to the side of the red or yellow strip did not appear) and see what happens.
Also, the sound can be turned off through the settings - the embedded function is running not to disturb (on android is also so there is such).
Then do not hear if someone will call you. This is an icon in the form of a crescent - make it inactive (gray).
The second reason why the speakers do not work on the iPhone - headphone connector
If you often use headphones, the connector is very often damaging, while the smartphone writes the headphones connected (may not write).
What to do. Briefly can solve the problem if inserted several times and pull out the cable from the headphones from the device.
Also in the connector you can kick the match, but if you continue to use headphones, you will soon have to replace the connector.
This is a problem not only for smartphones, but it often happens in the TV. The connector simply does not move into the original position, the metal plate and the device behaves as if headphones are connected.
Third reason why the speaker does not work on iPhone - the Bluetooth function is enabled
Apple smartphones can redirect the sound on the Bluetooth accessory then the speakers will not work.
What to do? Just go to the settings and turn off the bluetooth - if the sound appears, then you can disable this feature.
If it does not appear, it means that it is not something else, for example, in software. Then just make a reset settings to the factory.
Cause The fourth iPhone fell and the speakers do not work
If the phone fell into the water, then the speaker could be easily damaged. However, not only the speaker, but any element responsible for the sound.
The same thing may happen if it fell into the snow and a little bit there - the phone is warm, water is melting into the device.
I once had a wife dropped into the water (I, however, also dropped into the water on fishing, but I carried it), so not only the sound did not work or it was not turned on, but I did not like the phone even to repair.
If someone after the fall poured an iPhone with water, then the sooner you need to pull the battery (the smartphone is partially turned off) to avoid closures on the board.
Cause The fifth speaker in the iPhone works bad or quiet
Very often, the sound quality in the smartphone wishes the best. Wheems usually happens after falling - the membrane is damaged.
What to do? Only change the speaker - they are not subject to repair, and not expensive (the better quality, the more expensive).
The speaker works quietly when the dust or liquid falls in it is especially sweet in it.
What to do? Usually cleaning solves the question. If dust, then you can blow with a squeezed aircraft.
Also, the sound can be quieter when dropping resistance on the audio column (sat down like a battery), then only change to a new one.
Other reasons why the speaker does not work in iPhone
If the speaker works badly, you can not rush with repair, because something you can communicate, but when it does not work at all, then the reason can be a hardware - breakage of the loop or element of the motherboard responsible for audio.
As an option, try headphones, very often they work, and when you can contact your service.
Here for you there is a pleasant moment - the loop or speaker changes very quickly - approximately 20-30 minutes.
So long without communication will not, although much depends on the service point itself - make sure that the service is good there, and then the week will wait for the employee to find a suitable required component.
The speaker does not work in the iPhone - summarize
By summing up you can say the following. In the smartphone there is a top and bottom speaker. It may be damaged by any. To basic reasons belongs:
- pouring smartphone (snow, rain, tea, beer, coffee, juice, water);
- mechanical damage (falls: fell, dropped);
- dust, small garbage, connector
- software failure;
- the volume is turned off;
- manufacturing defects.
If there are suspicions of the factory marriage, then immediately carry the Apple service, just make sure that there is no unlicensed software in the iPhone - if there is no repair for warranty.
Also, the warranty is canceled if dropped, flooded or damaged the device - then you can contact any service - not necessarily in Apple. Successes.
You can not use your phone, since the speaker does not work on the iPhone? In this case, you should know the answers to the following questions:
1. Because of what this breakdown at all appeared?
2. How best to solve the problem - fix the iPhone yourself or contact the service center?
3. Ensure video instructions for independent repairs and where to find it?
On our site you can get answers to all these questions and many others. We recorded full video repair instructions. In addition, we will teach you to diagnose.
To restore the performance of the device, you need to know:
Top reasons due to which speaker does not work on the iPhone
|
Important: Promotion! Reduced the price of 50% marked with the word "action", valid until the end of this month
1. How to spare iPhone from copy; |
Cost Setting details in our Service center: |
|||||||||||
| Name of spare parts | X. price |
8/8 Plus. price |
7/7 Plus. price |
6s. price |
6s Plus. price |
6 price |
6 Plus. price |
5S / SE / 5C / 5 price |
Price installations in rubles. |
Repair time | ||
| Glass | 8900 Stock! Promotion until Sunday |
2400 Stock! Promotion until Sunday |
1800/1900 Stock! Promotion until Sunday |
1300Display with glass (original) Quality 100% | 25500 Stock! Promotion until Sunday |
9400 Stock! Promotion until Sunday |
6000/9300 Stock! Promotion until Sunday |
4800|||||
| Display with glass (copy) Quality 80% | 14400 5300/6300 1900/2100 3300 3300 1500 2300 1100 490||||||||||||
| Battery original | 1480 | 1480 | 1100 | 1100 | 1100 | 950 | 950 | 950 | 499 | 20 minutes | ||
| Battery Copy Promotion! | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 700 | 499 | 20 minutes | Rear camera | 4500 | 3900/3450 | 2600/2900 | 850 | 900 | 750 | 700 | 500 | 499 | from 2 hours |
| Power supply with train Promotion! | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 499 | 30 minutes | Turning button with loop | 420 | 420 | 450/420 | 450 | 420 | 450 | 420 | 420 | 499 | 30 minutes |
| HOME button (body part) | 450 | 450 | 450 | 420 | 450 | 420 | 450 | 450 | 499 | 10 minutes | HOME button (Interior: Clay Components) | 490 | 450/490 | 490 | 450 | 490 | 450 | 450 | 490 | 499 | 20 minutes |
| Speaker | 290 | 490/290 | 290 | 490 | 290 | 490 | 290 | 290 | 499 | 20 minutes | ||
| Microphone | 290 | 290 | 290 | 290 | 290 | 290 | 290 | 290 | 499 | 30 minutes | ||
| Back cover | 3900 | 3690 | 3690 | 2950 | 3100 | 2500 | 2700 | 1900 | 250 Promotion! | from 30 minutes | ||
| Antena GSM. | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 499 | 30 minutes | ||
| Antenna WiFi. | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 450 | 499 | 30 minutes | ||
| Module WIFI. | 1500 | 450/1500 | 1500 | 450 | 1500 | 450 | 1500 | 900 | 499 | from 1st hour | ||
| Sound controller | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 499 | from 2 hours | Power controller | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 1200 | 499 | from 2 hours |
If a quiet speaker on iPhone, first need to determine the cause of the breakdown. For this, the diagnosis of the phone is carried out. How to do this we pointed out on the site in the Quality Control section. After the breakdown is determined, it will be possible to start the next step.
Video instruction: elimination breakage
We suggest you to explore the video instruction that will help to eliminate breakage. We all described in detail and showed how to make repairs.
You can see the other videos in the section quality control
If you have read the video, then you will have 2 options for solving the problem, because in practice, many often faced problems.
You can not waste time and immediately bring an iPhone to the GSMmoscow service center. Here the repair of your phone will be held by highly qualified specialists who know their work perfectly, so they will solve problems very quickly and efficiently.
If you still decided to repair yourself independently, then to work will be needed tool and spare parts. All this can be purchased from us.
Apple mobile phones (all generations) are allowed not only to carry out calls, but also watch the video, listen to music, enjoy high-quality sound. But this is subject to the fulfillment of the dynamics. Alas, but there are situations when some details of your favorite thing break. And if it happened so that you do not work the speaker on the iPhone or complain of a quiet speaker on the iPhone, carry it to "treat" specialists. And the sooner you will gather, the better, because with time the breakdown will be harder.
We invite you to consider some reasons that may cause malfunction
1. If a quiet speaker on the iPhone, it means that the auditory canal is clogged and should be cleared.
2. In fifty percent of cases from mechanical effects, the mechanism itself fails for the volume of sound in the device. Here you need to replace the speaker on the iPhone.
3. Twenty percent of cases when the speaker does not work on the iPhone, the phone simply thinks that the headset inserted into it, as a result of which the sound does not turn on. This is due to moisture from entering the device and closure contacts of the printed circuit board. To identify the place where the moisture hit, a diagnosis is required.
4. Thirty percent - the speaker does not work on the iPhone 4G after entering moisture or impact, which is due to the parts of the printed circuit board, tracks, sites, etc. are damaged. To clarify the problem, you need to diagnose.
Cost:
The table below shows the prices for spare parts, as well as the services offered by our service center.
It is important to remember such relationships as time is money. Timely repair, that is, the replacement of the speaker on the iPhone 6, 6 Plus, 5, 5S, 5C, 4, 4S, or simply eliminating the causes of the malfunction not only the time you will save you, but also will save from complications and increase the cost of repair work.
What can be done at home:
We offer several options:
1. Try to start very sharply insert into the socket and also drastically remove the headphone plug. Do this procedure several times.
2. Remember whether you installed some software. This also serves as a reason why the speaker does not work on the iPhone 4, 4S. Remove the software and look at the "reaction" of your iPhone.
3. Silent speaker on iPhone 4, 4S is a consequence of a random reduction in volume to a minimum. Check the sound lever.
4. If nothing helps - try rebooting, pressing the HOME button at the same time and the POWER button.
5. Quiet speaker on iPhone 5, 5S, 5C is a consequence of using Bluetooth headsets. To do this, go to the settings and disconnect them.
If the manipulations did not led to anything, it is necessary to contact us in the service center, as it is likely to replace the speaker on the iPhone. Do not try to "cure" it yourself, if it is not related to the situations listed above. Here you need help people who understand the mechanism of devices of this type.
The guy who applied to us faced such a problem: the speaker does not work on the iPhone 5, 5S, 5C. And it is one that is located in the upper part of the apparatus. That is, when conversing it, he can hear, and the interlocutor - no. Loud connection and headphones are in order. Restoration through Aytyuns also did not help. Checked the audio connector - also did not help. The diagnostics has established a breakdown of one radio element.
From this example, you should, Amena dynamics on iPhone 6, 6+, 5, 5S, 5C, 4, 4S, is not always required. It is enough just to refer to the specialists to establish the true cause of a malfunction. And then everything will be fine.
Never try to solve this problem yourself. This leads to an even more fault.
A little about our service center.
1. We sell original spare parts for the whole of Russia and at the lowest prices.
2. Regardless of which the repair of the iPhone dynamics is performed, we will give a guarantee for the entire device, and not on its separate mechanism.
3. Diagnostics are carried out for free.
4. Replacing the speaker on the iPhone is carried out only on high-quality equipment.
If the sound does not work in the iPhone X, then pay attention, first of all, two dynamics of the device: one is located below, and the other behind the hearing hole.
The speaker in the phone may not work for a number of reasons that are divided into two categories:
- problems with equipment;
- software problems.
If the speaker is a long time gives out an extraneous sound, then you should make sure that there are no foreign objects, blockages, garbage near the part of the reproducing sound.
Sound adjustment
Check out the sound adjustment button. When the phone is in silent mode, the sound speakers do not reproduce. When using the key, the corresponding indication will appear on the screen, so you do not confuse.
Look at the sound settings in the phone. Perhaps the sound sound is at a minimum level. Open the settings and select Sound Settings. Put the value of the ring volume level to the maximum position.
Wireless connections
Turn off the wireless connections (AirPlay). Their presence is the reason that sometimes the sound disappears in the iPhone X. Disabling AirPlay will allow you to be sure that the sound is not played through third-party devices, such as, for example, in the case of Apple TV. It happens an iPhone automatically connects to the devices that worked earlier.
How to disconnect the AirPlay devices? Open the Control Center, spending on the bottom up screen. Click on the icon indicating AirPlay in the form of a TV. If the blue icon, then the iPhone is connected to an additional device. Turn off the AirPlay and the sound will be played only through the speakers.
Please note: if you fail to open the Control Center, you may need to spend on the screen not from the Niza itself.
Disconnect the devices connected via Bluetooth. Repair the automatic connection to Bluetooth devices. The situation is similar, as in the case of AirPlay connected wireless, the device can reproduce the sound, while the speakers of the phone itself do not publish anything.
Turn off the Bluetooth on iPhone can be three ways
- Click the "Home" button and hold. Assistant Siri will appear. Enough to say "Turn off Bluetooth."
- Through settings. Bluetooth is turned off when the gray switch.
- Turning off Bluetooth via Control Center. Click on the Bluetooth icon turned off.
Looking at the right upper corner of the screen, you can easily determine if Bluetooth is turned on or not. If there is an icon, it means that it is turned on.
Mode "Headphones"
Make sure your phone is not in the connection to headphs. Your phone may seem to be in headphones mode. This happens if foreign objects, garbage, dust fall into the headphone socket.
Quickly learn in what mode the phone is located, you can click on the volume buttons on the left side of the case. Inspect the headphone socket so that there is nothing superfluous. If you have breaks, use a special antistatic brush or a new toothbrush.
ATTENTION: Do not use anything under voltage or items that can damage the device elements to clean the phone.
Update iOS on the machine
iOS is an operating system for iPhone, iPad and iPod. Apple regularly releases operating system updates, which eliminates errors and disadvantages of previous versions. If an outdated version of iOS is installed on your device, it may cause problems with sound. IOS update will allow you to resolve the question.
There are two ways to update iOS:
- through settings;
- through the iTunes application.
Open settings. Click General. Select Software Update. If the update is available - set now.
Update with iTunes
- Connect your iPhone 10 to a computer using a charging cable.
- Open iTunes.
- Press the button as a phone in the upper left corner of the application.
- Check for updates.
- If the update is available - click Download and install it on your phone.
ATTENTION: If you are going to update iOS through settings, make sure the battery is charged to more than 50% or connect the phone into the outlet.
Reset all settings
Reset settings will not hurt the personal data contained in the phone. This will allow you to bring all the parameters of the device to the initial, factory values. Then you can configure the battery operation, select a screensaver on the screen, set a new password for Wi-Fi and make a lot more.
Resetting the settings allows you to solve a number of problems caused by incorrect phone settings. Including this way there may be solved the problem of the absence of sound in the phone.
Click on the "Home" button
Open Settings - General - Reset all settings.
When the reset is completed - the phone will automatically reboot.
DFU-flashing device
Refracting the device allows you to get rid of the problems that arise by erasing the code causing dysfunction.
- Connect the iPhone 10 cable to the computer.
- Open iTunes. It does not matter that your phone is turned on or off.
- Press and hold the phone's turning button and the bottom of the volume control key until the iPhone detection message appears in the iPhone application as part of the recovery process.
- The phone screen at this time should be completely black. If it is not, then repeat the above steps again.
- Run the phone firmware recovery using iTunes.
We hope you managed to solve the problem through the above steps. Speakers should sound loud and clean. If the problem with the speakers remained unresolved - please contact the service center. Most likely, some components of the device came out. Professional specialists will eliminate this problem.
No sound is a rather common problem in modern smartphones. Could fail both front and main speaker. It is impossible to use a device with such a defect on the destination - you simply do not hear the sound sound or the word of the interlocutor when talking. The problem occurs both on Android and on iOS devices. It is described below what to do if the speaker does not work on iPhone 6.
As noted, it can break through both the upper and lower sound modules. We highlight the main causes of faults:
- Water got into the smartphone and disabled the hardware. The fluid can get on the fee and lead to its breakdown. To repair such malfunctions, contact the service center.
- Fit into the dust module or other small particles. If you constantly wear a phone in a dirty pocket pocket and handle it casually - clogging will become a frequent problem.
- Program malfunction that violated the operation of the drivers. The failure may also be a consequence of infection with viruses.
If only one speaker broke on the iPhone - it is still possible to talk, turning on a loud connection. In some cases, it helps the use of the headset.
Elimination of software malfunctions
The module stops working due to improper smartphone settings. Follow the instructions below to eliminate all the causes of the software failure.
- Open the gadget parameters, go to the Assistive Touch tab. Set the switch to the "Enabled" position.
- Check the current volume level. Use the "swings" and check whether the sound is present in some specific position. Perhaps the device incorrectly determines the volume.
- Restart the device by pressing the power button and the HOME button for 10-15 seconds. After completing the procedure, everything will work again.
- Check the device for malicious software - sometimes viruses disable the display or other phone modules. Free antiviruses download in the App Store.
If the above methods did not help - the problem is in the hardware.
Output
In most cases, breakdown occurs after a mechanical impact on the gadget body - when dropping or strong impact.
- If you do not hear the interlocutor when talking on the iPhone 6 - make sure the phone did not fall and was not in the sun for a long time. Due to overheating, the components of the board can seriously suffer and stop performing their functions.
- The sound disappears and after entering the fluid inside the smartphone. In iPhone 6, the sound module is protected by a fine grid that does not save the speaker from water.
Hardware faults are best eliminated in official service centers.
Important! When liquid enters the device, the warranty becomes invalid.
Cleaning a beep loop
After the fall, it can disconnect from the connector or obtain physical damage loop on the chip. If the iPhone speaker stops working, do not rush to disassemble the device - you just remove warranty obligations from the manufacturer, and not eliminate the problem. Any maintenance procedures and its components should be trusted only by proven Apple specialists.
Important! Treat care to cheap "masters", working in the markets and in small stores. Spare parts and repairs in such specialists are cheaper, but the guarantees that the smartphone will work regularly, no one gives.
Iphone motherboard malfunctions
No sound can be caused not only by the malfunction of the dynamics itself, but also damage to other chips and components. For example, in the iPhone 4, it could not work because of the poor contact of the plume connector with the board.
In addition, after entering the liquid, the contacts of the contacts are oxidized, which often becomes the cause of their breakdown. The sound module itself can lose the necessary contact with the fall after the fall.
Sound check methods
Several basic ways to check sound availability can be distinguished:
- Turn on the music and set the most loud mode. Apply the phone to the ear and listen, whether the sound module makes some noise. Perhaps the corresponding chip simply does not receive power from the board.
- Check how correctly the volume is running.
- Make sure one speaker works when talking. Specify from the interlocutor if he hears you.
In some situations, the usual reboot helps to eliminate the fault. Perhaps the operational memory of the smartphone is overloaded with a large number of processes. Cut can and sound driver.
Use headset
Prior to a visit to the service center, use headphones to make calls and listen to music. If only the sound generator itself is faulty - this method will work, but when the chip is out of order.
Conclusion
On the iPhone, the call disappears after physical damage to the device - drops, blows and water from entering the case. The cause of the problem is often infected with viruses and a banal "hanging" of the system. In some cases, a simple reboot or installation of the necessary parameters in iOS will help, but most situations should be included in the Apple service center.
Video
