Unpack your computer. It may include the following equipment:

• The system unit is the main device of the computer. It connects to a monitor, mouse and keyboard.
• Monitor - You can use an old monitor (if it suits you).
• Mouse and keyboard - choose the one that suits you best (price, quality, speed, ergonomics, etc.)
• Speakers - sometimes they are built into the monitor.
• Printer - usually it is purchased separately.

Install system unit so that there is empty space around it for free air circulation and cooling of computer components with its fans (usually located on the back of the case, but can be installed on the front, top and side surfaces). Do not install the system unit between drawers or inside a cabinet (in this case, make sure that there is enough free space between the walls of the drawers/cabinet and the system unit).

Connect the monitor to the system unit (connector on the rear surface). Monitors are connected to DVI, HDMI, VGA connector.

• Also plug the monitor into an electrical outlet.
• If you have a discrete graphics card, connect the monitor to it, not to the built-in (integrated) graphics card. The connector for connecting a monitor to a discrete video card is located on the rear surface of the case (below the built-in card connector).

Many of the programs we download from the Internet are zipped (packaged) to reduce their size. Those. programs are archived. Before installing the program from the archive, it must be unpacked (there are exceptions to this rule). Here is an example of installing a program for checking texts for plagiarism, which, after downloading, is in the archive.

Option 1. Only the ZIP archiver is installed on the computer

So, after downloading, a ZIP archive appears in the downloads folder.

Note that the archived file is displayed differently than regular folder. A zip lock is drawn on the archived folder. We can easily look into the archive folder and see the files necessary for installing the program in it.

Alas, if we try to start the installation by clicking on the setup icon, the installation of the program will not start, but a message will appear "This application may be used by others compressed files stored in this folder. To run the application correctly, you must first extract all the files.

In a particular case, to install the program, you can run not the setup file (setup.exe), but the EtxtAntiplagiat file ( EtxtAntiplagiat.msi). However, in some cases it is necessary to extract all the files from the archive, and only then proceed with the installation of the program. To extract files, use the button Extract all(see previous figure).

Pushing a button Overview, you can select the location where the archive will be unpacked. As an example, let's unpack the archive into the Program folder, which we will create on the desktop.

Now you can safely proceed to install the program. After double clicking on the icon setup the program installation process will begin.

After double-clicking on the setup icon, the installation process of the program will begin.

If the computer has WinRAR archiver, the steps will be slightly different.

Option 2. The WinRAR archiver is installed on the computer

As a rule, after installing the WinRAR archiver on the computer, it becomes the default archiver, i.e. all archived files will be opened with WinRAR. If the WinRAR archiver is installed on the computer, the archive files look like a stack of books tied with a belt.

The WinRAR archiver is much more advanced than ZIP archiver bundled with Windows. In a specific case, WinRAR allows you to install the program by running the setup.exe file, even without unpacking the archive into a separate folder. If you still need to unpack the archive, then in context menu(called by the right mouse button) you can select a location for unpacking the archive.

For example, if you select the Extract to etxt_antiplagiat\ option, then a folder will be created in the downloads folder that matches the name of the archive, in which the files extracted from the archive will be placed.

If you have any questions about installing programs from the archive, ask them in the comments.

Evgeny Mukhutdinov

Batch download programs- this is something that until recently only a select few advanced users knew about. Previously, you could download software from different developers using English language services, known mainly to system administrators and geeks. Now we have InstallPack, a Russian-language application for batch downloading programs, designed for users of any level.

Questions:

How to install multiple programs at once?

How to install all the necessary programs at once on several computers?

Recommend software for installing free programs

Other questions about InstallPack

Step 1

Download the InstallPack application. You can do it from ours or from the official site: https://installpack.net/ .

Step 2

We launch the application and get acquainted with the interface. In the main window - a list of programs available for download. They can be sorted alphabetically by clicking on the "Name" tab, or by category by clicking on the "Category" tab, respectively. The last option will certainly help when you know what the program is for, but don't remember what it's called. Opposite each of the applications, you can also see its rating, price, size and a brief description.

Step 3

Let's look at the ready-made sets of programs by going to dropdown, where "TOP-100" is selected by default. Here you should pay attention to the "Must have" package - it will be especially useful after reinstalling Windows. In the Patriot package you will find software from Russian developers. As for the rest, their names speak for themselves.

Step 4

For convenience and saving time, we use search string located in the upper left corner of the interface. It is enough to start typing the first letters of the program, and you will immediately see it at the very top of the list. For example, if you set out to find the Opera browser, type the Latin "op" on the keyboard - this will be enough.

Step 5

We mark the programs we need with a tick. You can also put a checkmark next to the inscription " Silent Installation” - in this way, we will save ourselves from notifications, which, as a rule, come from the installation wizard during installation. Programs will start installing one by one to minimize the impact on the processor load

Step 6

Finally, close InstallPack and make sure that the application shortcut is saved on the Desktop. Just in case, we recommend that you save InstallPack to a USB flash drive as well - since the application starts without installation, it can also be used as a portable version. We will be able to quickly and conveniently install several programs at once in various situations, whether it is reinstalling the system, buying a new computer, or working on a new project.

Hello dear readers.

Probably every computer user knows what CD/DVDs are. Especially the one that caught the era of soft media. Today, on such a portable memory, you can usually see the installation files of the operating system, movies or games. And earlier it was almost the only way to transfer large volumes of information at that time. And today, some companies offer applications on these kinds of devices. In the article I will tell you how to install the program on a computer from a disk?

Already today" World network» developed as never before. This allows you to get almost all software in a matter of minutes. But sometimes some users still encounter a situation where they need to install an application from a disk on a computer or laptop. To do this, we make several movements:

no drive( )

Sometimes there is a problem when devices simply do not have the appropriate connector. What to do if there is no disk drive? Then you need to insert the metal-coated plastic into another computer, copy all the files from it to a USB flash drive, and then use USB portable memory for installation.

Specialized programs( )

Some users often have problems with the location in the system of special software that relates to car diagnostics - OBD2, ProScan, ELM327 and many others.

It, like everything else, comes on a disk, along with elements that are connected directly to the car. How to properly place it in the system is indicated in the attached instructions.

If something is not clear to you, you can watch a video on this topic:

Sometimes problems arise with Victoria software, with which the hard drive is checked for problem areas. This usually happens due to incompatibility. Before starting, just find the right version.

After buying a new computer, upgrading the disk system or reinstalling Windows, every time we are faced with the need to install the set of programs we need. If your list of applications has more than a dozen titles, then the process of downloading and installing can take a whole day. It's much easier to do this with special programs, which can download and install many applications in batch mode. We will introduce you to some of them now.

AllMyApps

AllMyApps has a huge database of both free and paid apps. You can create a free account on the site, and then choose the programs you are interested in. After that, you must install the AllMyApps special client, which, in turn, will download and install all the programs you have chosen on its own. In addition, the client can detect all the software you have installed and update it as needed.

My personal favorite in this review. You don't even need to register to use Ninite's services. You just need to mark the programs for installation on the site, and then download the specially generated installer for you, which will automatically install all the programs you need in batch mode. There are not so many of them in the service database, but everything necessary and popular is available here. And the most important thing in the work of Ninite is its reliability and speed.

This small program allows you to automatically install in "silent mode", that is, without user intervention, a fairly wide range of programs. You will need to install Speed ​​Install on your computer, mark the programs you need and click the button Install. An interesting feature of the program is the ability to create "offline installers", which can be useful if you need to service a computer that does not have access to the network.

This program tries to mimic the functions of the Linux package manager. With its help, you can quickly install any of the programs available in the database, update or remove existing software. A feature of Npackd is the ability to install old versions of programs, so if you don’t like updating some application, then you can roll back to previous version. Currently, Npacd is aware of the existence of more than 300 software products.

Another great package manager for Windows, iPhone and Android. With it, you can easily download, install, update and remove applications from your device. All programs, and there are about 150 of them for the PC, are conveniently divided into categories with the ability to quick search. By ticking the the right programs, you only need to click on the button , after which FreeApps will perform all further operations on its own.

Although in operating rooms Windows systems there is no single interface for managing software, like it is done in Linux, there are still quite decent third party solutions. With their help, you can greatly facilitate and speed up the process of installing, updating or uninstalling programs on your computer.