Xiaomi Redmi Note 3 Pro is still too early to discount, although there is also. The model turned out to be very successful than the love of not only Mi-fans won, but also other users. In this article, we will tell you in detail about all the obstacles you have to face in the installation process on your custom firmware smartphone.
1. Install the driver on the computer
First of all, you need to install the driver on the computer. Most. simple way It is installing the MI PC Suite program that automatically downloads and installs all the necessary drivers. If for any reason you failed to install the drivers using this program, you will have to do it manually:
Load archive with drivers and unpack its contents in the folder "C: \\ Drivers"
Connect the phone to the computer using a USB cable; Open the Device Manager on the computer
Right-click on the "Unknown Device" that appears "and select" Update Driver "
You select "Run the driver search on this computer", find the folder with previously downloaded drivers and choose it
Confirm the installation, everything is ready 🙂
If you are still experiencing problems with the installation, then you may help to disconnect the check. digital signature Drivers installed.
2. Unlock bootloader
Now you need to unlock the bootloader on your phone. To officially unlock the bootloader on the smartphone from Xiaomi ,.
3. Installation of custom recovery
And now you must establish custom recovery on the device.
For this, clearly follow our instructions:
Load the image of the custom recovery in format.img, the version of TWRP 3.1.1-1 will be suitable;
Enter your device in fastBoot mode, simultaneously holding the button on and reducing the volume until the FastBoot logo appears;
Connect the device to the PC;
Open the folder with Miflash and move the downloaded .img image into it. Click the SHIFT on the keyboard and by clicking the right button along the folder space, open the context menu in which you select "Open the commands window";
In the window that opens, type the command: " fastBoot Flash Recovery File.img", Where file.img is the name of the downloaded image of a custom recovery. Perform the entered command by pressing the ENTER button;
Perhaps the phone will reboot several times, after which a custom recovery will be installed on it, and the device itself will be fully prepared for custom firmware.
If you suddenly decide to flash the official version of MIUI using a custom recovery, you will have to disappear bootloader: in the TWRP menu (custom recovery) click "Advanced" -\u003e "Disable Verify", then install a patch on the path / sbin / cofface .zip. If you are going to install custom firmware, then this step should be skipped.
4. Installation of custom firmware
Are you still here? Whether your patience and dedication! And just now you can install custom firmware.
Follow our instructions further:
Pre-download the firmware you like and Gapps to it (a set of google applications, its services and Google Play., including) and copy them to the internal memory of the phone;
Restart your smartphone to mode Recovery TWRP.by holding the inclusion button and increase the volume before the "Mi" logo appears;
Go along the path: "Wipe" -\u003e "Advanced Wipe", check "Dalvik / Art Cache", "System", "Data" and "Cache" after which you confirm the cleaning, or by clicking on the confirmation button, or by spending the slider below ;
Now select the "Install" item in the menu, select the firmware archive in the phone and, if necessary, the Gapps archive;
a slider or button confirm the installation, after which you select the "System" item in the "Reboot" menu, which is responsible for rebooting into the system;
After rebooting, configure the device as when you first turn on and enjoy a new firmware.
Detailed instructions for installing the official firmware on Xiaomi Redmi Note 3 Pro (Kenzo) through the Miflash application without having to unlock the bootloader.
Drivers and programs
Attention!
Installation Instructions
Create in the root of the disk with: \\ folder named " Android».
Disable drivers authentication.
Windows 7.
While turning on the computer after bios downloads, you need to press the key F8.. In the menu " Additional options Downloads" choose " Disabling mandatory driver signature». This method It can work not the first time, so you should repeat the action or open the command line on behalf of the administrator and enter two commands:
« bCDEDITIT.EXE / SET LOADOPTIONS DDISABLE_INTEGRITY_CHECKS»
« bCDEDITIT.EXE / SET TESTSIGNING ON»
Windows 8.
Need to press the keyboard key WIN.+I., clamp the key Shift. And choose the item "". When you turn on the computer, select " Diagnostics» > « Extra options
» > « Download options» > « Reboot" When you download select "" by pressing the key F7..
Windows 10.
You must clamp the key Shift. and choose the menu " Start»\u003e" ". After downloading, choose " Troubleshooting» > « Extra options» > « Download options» > « Reboot" Then choose the item " Disable mandatory verification of driver signature"By pressing the key F7..
Download official firmware (for example, global for developers) and unpack the archive to any folder.
It is recommended to use the path to the folder without Cyrillic characters. For example, " C: \\ Android \\ name_name».
Run the Miflash utility, click the "button" Next»To install drivers, agree with installing all drivers, wait for the installation of the installation, and after clicking the" End.»To close the window.
Translate phone FastBoot mode.
To do this, turn off the device and turn on the volume with the volume key. On the screen should be displayed the hare in the hatching cap.
Connect the phone to the computer via a USB cable.
It is recommended to use the original or cable. good quality, as well as a USB 2.0 port located on motherboard (for PC).
Open command prompt and go to the created folder Android team « cD C: \\ Android \\"(Teams are written without quotes).
Make sure that the computer finds the device in FastBoot mode.
To do this, enter the command " fastBoot Devices." If in response, " xXXXXXX FastBoot"So the phone is connected correctly. If "Waiting for Device" is displayed or nothing at all - it is necessary to check the status of the USB connection or reinstall the driver.
Reload the phone to EDL mode (Emergency Download Mode.) team " fastBoot OEM EDL."Either" FastBoot OEM Reboot-EDL ".
IN " Device Manager»A new device should be displayed. Qualcomm HS-USB QDLoader 9008 in category " Ports (COM and LPT)».
Run the Miflash utility. Then click " Refresh.", Then" Browse ..."And specify the path to the folder with the firmware. At the bottom of the screen, select the item " Flash All Except Storage»To save files in the device's memory or" Flash All.»To format the internal memory and click the" Flash." The firmware installation process will begin.
After the operation, the phone should reboot himself.
If this did not happen, you need to enter the command line " fastBoot OEM Reboot-EDL»Or clamp the power button seconds 10 before the MI logo appears. Now the cable can be disconnected. After a couple of minutes, the device will boot and will be ready for further work.
If the firmware is installed on the basis of Android 6.0 Marshmallow, and it is planned to use TWRP, it is impossible to allow "encryption" of the user partition / Data..
To do this, it is necessary, without giving the smartphone to start loading into the system, immediately install custom recovery.
Immediately, after the end of the firmware installation process, you need to hold the volume key and the power button to go to FastBoot mode.
Then install TWRP command " fastBoot Flash Recovery Recovery.img».
At the end of the operation, reboot the device to the recovery mode by the team " fastBoot Boot Recovery.img.».
In the recovery to disappear the loader, as was done when installing a custom recovery file " lazyflasher-no-verity-opt-encrypt.zip.».
After completing the installation, restart the phone by selecting " Reboot» > « System.».
If the phone managed to boot into the system and the user section is not available in TWRP, there are two options to mount / DATA in the recovery:
Copy
List of instructions for Xiaomi Redmi Note 3 Pro 32GB
Installation of the official firmware | Xiaomitool
Now I will tell you how to install the global firmware on the Redmi Note 3 Pro.
Immediately warn you that all your actions you do at your own risk! The firmware is suitable for the Pro version of the SNAPDRAGON 650 processor database!
Preparatory stage:
1) Operating system Windows 64 bits (x64)The 32-bit error crashes and it turns out a brick from the phone!
4) this method of firmware does not require Unlock bootloader.
Instructions for the firmware REDMI NOTE 3 PRO (Kenzo):
1) Install the MIFLASH program: Run MiPhone.exe from the archive on behalf of the administrator. In the process, the red plate will be shown. "Failed to check the publisher of these drivers," we agree, click "Set this driver anyway."
2) open the console windows CMD.. To do this, press Win + R and enter CMD. In the opened console write
cD "C: \\ Program Files (x86) \\ xiaomi \\ miphone \\ google \\ android \\"
And press ENTER.
While we leave the window as it is and proceed to the next step.
3) We take the phone and go to settings -\u003e About Phone., then click on Miui Version 7 times and you will open Developer Options. Click the Back button and go to the Additional Settings -\u003e Developer Options. Turn on Options: Developer Options and USB debugging.
4) take high quality USB cable (Better Original Xiaomi) and connect the phone to the computer with it. If you have a laptop, then in any free USB port, and if you have stationary computerthen to any USB port. on the back wall of the system unit.
5) Press the combination of Win + Pause / Break, in the window that opens, click on the left "Device Manager" and check that the phone has been determined and all drivers are successfully installed.
6) go to the console, which was open after step 2. Introduce in it
adB Devices.
A query "ALLOW USB DEBUGGING?" Will appear on the phone screen. We put the gallery "Always Allow from This Computer" and click OK.
And again in the console we introduce
adB Devices.
7) After that, we enter the console
aDB Reboot EDL.
The phone will go to the firmware mode, the message should appear on the driver to install the driver for "Qualcomm HS-USB QDLoader 9008". The phone screen will go out and only flashes the red LED on the phone.
8) Unpack the firmware, for example, to a C drive:
Thus, you have firmware files will be in C: \\ kenzo_global_images_v7.1.8.0 \\
9) Run on behalf of the administrator C: \\ Program Files (x86) \\ xiaomi \\ miphone \\ miflash.exe. Press Browse. and specify the path before the firmware C: \\ Kenzo_Global_images_v7.1.8.0, then click Refresh.. Appears on the phone list, you need to select it and also to choose it Flash All..
After that click the button Flash. And we are waiting for the message "The operation has been successfully completed ...". I took the firmware process somewhere 200 seconds. After turning off the cable from the phone and click the power button for a long time. The first time will be loaded long enough - this is normal, because There is a system setting. You now have a multilingual firmware.
Greetings to all.
Some time ago I announced the emergence of this review in my accessories reviewers ordered to it, this, and 3.0 - ® BW-S5.
Although everything ordered was one day, the smartphone himself came the most latter. Price on order date
Briefly about the characteristics
Manufacturer Xiaomi.
Screen: 5.5 inches, resolution of 1920 x 1080, 403 PPI, Capacitive 10 clicks
CPU: Qualcomm 1.8GHz Hexa-Core
GPU: Adreno 510
OS: Android 5.0 + MIUI 7 (updated to MIUI 8)
RAM +. Inner memory: 3GB RAM + 32GB ROM, memory card - instead of second SIM
Cameras:
Fronal: 5.0MP with F / 2.0
Rear: 13.0MP with an angle of 78 degrees, and f / 2.2
The fingerprint scanner
NAVIGATION: GPS / A-GPS / GLONASS / Beidou
Support Bluetooth 4.1 and Wi-Fi 802.11 AC
SIM Cards: Two SIM Maps Micro Sims or One Micro SIM and Micro SD
Network support:
FDD-LTE + WCDMA + GSM
2G: GSM 900/1800 / 1900MHz
3G: WCDMA 850/900 / 1900 / 2100MHz
4G: FDD-LTE 1800/2100 / 2600MHz
Packaging - characteristic black package. Normal, without puffers 
Puchka separately, the box is closed into it 
Since for more than six months, I am the owner of the standard version of Xiaomi Redmi Note 3 - of course I will compare with him.
The box is exactly the same 
The difference can be seen from the back, guessed in the Specs. Note on Snapdragon 650 
The smartphone was ordered for women's hands, in golden colors 
Complete set, useful - smartphone, flat plug power supply, charging cable and clip 
BP - not similar about version, easily pulls 5V 2A, here and then I will refer to my review Note 3, the link to which is higher.
Externally - just as a complete analogue of Note 3, the films are not to shoot the stadium - as the gadget was not bought for himself. 
Similarly, the location of all elements from behind. 
Difference - in the tray for sIM card. In Note 3 - you can insert 1 or 2 SIM, in Note 3 Pro - instead of the second SIM - you can put MicroSD 
Better full of similarity will demonstrate comparative photos 
I was very comfortable to keep my smartphone 
Thickness is the same 
It is time for inclusion 
From the box installed multilingual firmware based on MIUI 7 
Normal for MIUI 7 type of desktop. In a pink version. Let not the impression of the dim screen - a photo through the transport film. The screen is beautiful. 
Installed some incomprehensible stable 
What plus this model is You do not need to unlock the bootloader and install custom firmware. Just in case I remind you that once received permission to unlock on your MI account - you can unlock 1 phone per month. I unlocked on my pieces 5, and in terms I had the opportunity to unlock this, but did not intentionally do this. The fact is that there is a global official firmware, in support of multilinguality and OTA updates. Therefore, there is no need for the need.
You only need to easily flash the global firmware, then it will be updated itself.
The firmware was done on a computer running 64x discharging Windows 7 using the 4PDA site. In order not to look for - I give instructions here.
1. Installing drivers.
To do this, we set the program that will set all the necessary drivers. We answer all requests - set anyway. This program does not sew !!! Only need for drivers 
2. Swing the program for the firmware - and unpack on the disk with
3. Swing the firmware - I chose the Developer version of the global firmware from the official site for Android 5.1 and Miui 8. But this is at your discretion. Whatever to look for - from the official site. Here version 6.8.18 is the last on the date of writing the review, I sewed 6.5.19 (seen on the screenshots below) until the latter updated on OTA.
Downloaded by the archive - Unpack WinRar "Ohm to the folder. It is recommended to simplify the name of the folder, but I for example did not do this.
4. We translate the smartphone to the EDL mode - for this, on the smartphone, turn on USB debugging mode (USB debugging), which is in the settings for developers, which in turn will appear in additional settings After repeated tapan on Miui Version in the telephone information, and just in case you still activate the factory unlocking (OEM Unlock).
5. We connect the phone to the computer, all drivers must be determined correctly. 
6. Run the mode command line (CMD in line Search for programs and files) and go to the folder where we put before Xiaomiflash - C: \\ Xiaomi \\ Xiaomiflash \\ Source \\ Thirdparty \\ Google \\ Android
Enter the ADB Devices command which should list of devices - your connected smartphone 
Click OK in the window that appears on the phone screen.
We translate the smartphone to the EDL mode by the ADB Reboot EDL command 
And the phone goes into EDL mode, which will indicate the flashing LED in red.
7. Firmware
Run Xiaomiflash on behalf of the administrator.
We connect the phone in EDL mode.
Click the refresh button that would make sure that the phone has been found by the program. 
We click Browse and point the way to the folder with the firmware, the left below is choosing the Clean All-clear version of the Clean All - it is necessary to clean everything, why we are incomprehensible to us, click Flash and wait for the crosant fingers. 
After a while - the firmware is successfully completed! 
Turn off the phone and long pressing the power button overload it. The first load is somewhat long. But now you have a formal, multilingual, constantly updated firmware. No need to fear Developer - it works great, much more new than stable, and contains all the latest buns. I myself use six months only Developer version, I update every week (although it is not necessary, some updates contain an improvement in the fonts of notifications from Chinese banks) and happy.
So, info about the phone after firmware and update on OTA
Many screenshots and tests I will not do, because first - time was 1 evening to do everything and give, and secondly - things like cameras, GPS, fingerprint sensor and much more I have already described in note review 3. Here is all too.
I will stop at some moments in which these phones are different. First, the parrots of the Antuta.
Xiaomi Redmi Note 3 Pro scored 75697 points against about 52,000 NOTE 3 
Relatively - almost like Galaxy S6 
That's what is the problems. But still, if necessary, it is easy to solve software 
My impressions - I certainly liked the smartphone, as the owner itself is almost the same. This is probably the only apparatus that, after half a year, I absolutely do not want to change. Would I go to Note 3 Pro with Note 3? No, it makes no sense, my device is more than satisfied with me, the increase in the parrots - I do not need. Moreover, I will say on Note 4, too, there is no desire to move, I do not see anything fundamentally new.
Should I buy if you have an old and dying phone - definitely yes.
Redmi Note 3 Pro or Redmi Note 3 - If you do not play games, then what is cheaper in this moment:), if you play the Redmi Note 3 Pro.
In general, a very successful and balanced device, I am very pleased with my own, as I hope, and the mistress of the current review will be pleased.
Thank you all, if there are questions - I will try to answer.
- mobile device does not turn on;
- the smartphone is constantly rebooted;
- the previous version was unsuccessful;
- brakes are observed, the device is regularly "buggy";
- there was a desire to establish the latest version.
Before making custom xiaomi firmware Redmi Note 3 Pro SE is recommended to carefully examine instructions for use, otherwise the operability of the phone can significantly decrease. If you have any questions and misunderstanding, it is better to give the phone to those specialists who easily cope with the task.
Methods of firmware
Before you start updating your smartphone, you should get root-rights that allow the device owner to change the settings in the system, delete system files, Run interesting applications. You can flash in two ways.
The first is considered to be easy, you need to have sequentially such actions:
- Download the official firmware and move it into the memory of a smartphone or an SD card using a USB cable.
- Go to the device settings, find the "phone" or "about the device" string, and then go → "System Update".
- In the window that appears in the upper right corner, you should click on 3 points, then on the "Select Firmware File" string. You should choose that one of them, which was recently downloaded and saved, then click "OK".
When working, the Internet should work. After firmware, all contacts, messages, settings will be deleted, that is, the system will be clean. If this method does not work for some reasons, you need to try another method.
Firmware via Flash Tool
The second method of firmware on the Xiaomi Redmi Note 3 Pro Sore is complex, but quite fulfilled. It is done in 2 stages:
Preparation
Be sure to need a PC or laptop with the installed windows version 7, 8, 8.1, 10. You should follow the following:
- Download program for installing drivers - MI PC Suit and Xiaomi Mi Flash Tool (Program Firmware).
- Download archive with firmware and save it on local disk "FROM".
- Now you need to go to the telephone settings, find the line "On the phone" and the inscription "MIUI version" to press several times. When the message appears that the owner of the device has become a developer, return to the settings of the smartphone. Find the "Advanced Settings" string, to find the string "for developers" and turn on the button to "USB debugging".
- The device is loaded into EDL mode. To do this, it must be turned off, after which it is connected to the PC, clamp the volume buttons (+ and -) and wait until the FastBoot mode will not be restarted.
Update
Now you should run the Xiaomi Flash.exe file (already as an administrator). For this, the folder with the new firmware is selected.
In the window you need to find a button. « refresh "and click on it. COM 20 shows that the computer sees the device.
Next, you need to click "SELECT" and specify the path to the folder in which previously stored installed firmware. Opposite Clean All, in order to stably work firmware, you should also put a tick. After pressing the "Flash" button, the download will go, will only wait for its successful completion. Usually it takes 4-5 minutes.
The number 231 indicates the boot time in seconds. For smartphone Xiaomi. Redmi Note 3 Pro Special Edition Firmware completed.
Immediately turn on and restart your smartphone is impossible. You should climb the power button and upper "+" on the machine. As soon as it boots, the Russian language is set, if desired, you can leave English. After that, you need to save recovery, putting a tick opposite it.
