How to distribute wifi with ip spoofing. Why the laptop does not distribute wi-fi

Modern technologies wireless communication greatly simplify people's lives. On this moment using the Internet, you can find any information, the answer to any question and much more. However, far from even despite the widespread use of wireless technology WiFi Not every home has a wireless network. But at the same time there is a laptop and cable connection to the internet. In this regard, many ask the question of how to distribute Wi-Fi from a laptop in Windows 7?

How to set up WiFi sharing from a laptop

Nowadays, there are several ways to share WiFi from a laptop:

Configure distribution by creating a Computer-to-Computer connection;
Organize the distribution using command line;
Share WiFi from a laptop using a third-party software.

It should be noted that different ways giveaways open up different possibilities. You will learn about this later when we look at all the methods in more detail. The first two options use the built-in tools of the OS, for example, Windows 7. This means that you do not need to download and install anything. So, let's consider all the options in more detail.

You can also read more about these methods at.

How to Share WiFi from a Laptop on Windows 7: Video

How to organize a home network "Computer-Computer"

To do this, in the so-called tray (lower right corner, where the clock and date are located, as well as other icons), you need to find the "Internet connection" icon (as in the picture).

Click on the icon, and in the window that appears below you need to click "Network and Sharing Center". If you cannot find the icon, then on the Start menu in search bar prescribe the specified phrase and start the service.

In the window that appears, you need to click "Set up a new connection". Next, you should select "Settings wireless network"Computer-Computer" and click "Next".

A window will appear in which you need to fill in only three columns:

Network name - can be anything you like;
Security type - it is recommended to select “WPA2-ptrsonal;
The security key is a password that will later be required to connect other devices. You also invent it yourself, but you need to remember it.

After filling in, you need to put a tick on "remember network settings" and click "next". The system will configure the distribution of the Internet via WiFi and in the window that appears, click "Enable Internet Connection Sharing".

Now you should go to the "Network and Sharing Center" and go to the section "Change advanced sharing options". Here, in all the items, you must set the checkbox to "Enable". This will give other team members access to files and other resources on the computer.

This completes the system setup. If everything is done correctly, then the PC will distribute the Internet via WiFi. As you can see, sharing the Internet via WiFi from a Windows 7 laptop or PC is quite possible. Moreover, it is easy and simple to organize a private group. But this is not the easiest method. The second option works most stably - networking using the command line. At the same time, setting up a group is simpler and faster.

How to set up WiFi sharing using the command line

It should be noted that in addition to the well-known advantages this way allows you to use a laptop wireless connection to receive and share the Internet at the same time. That is, a laptop not only creates a network, but is also a signal amplifier from an existing router or access point. In this case, the PC can also act as the main access point.

It should be warned that this method works only if the wireless adapter driver supports the Virtual Router function. But don't worry, any laptop that runs on the Windows 7 operating system has this feature. And even if the device is old enough, you can simply update the driver.

So, how to set up to distribute the Internet from a laptop via WiFi with Windows 7? It's simple. First of all, you should run the command line. This is done using the "Win" + "R" key combination. In the window that appears, write cmd and press "Enter".

That's it, the command line is running. Now you need to write a command that will install the virtual access point driver and create a virtual WiFi network. It is spelled out as follows: netsh wlan set hostednetwork mode = allow ssid = My_virtual_WiFi key = 12345678 keyUsage = persistent, where My_virtual_WiFi is the name of the network, you can change it to any other, and Key is the password, instead of 12345678 you can come up with any another key.

After you have registered the command, you need to press "Enter". After that, if the line is spelled correctly, a new hardware "Microsoft Virtual WiFi Mini-Port Adapter" should appear in the Task Manager.

Now you need to configure the connection in Windows 7. To do this, in the Network and Sharing Center, go to the "Change adapter settings" section. Here you will see a new connection called Wireless network connection 2 "as in the picture.

In order to distribute WiFi from a laptop with Windows 7, you should go to the properties of the connection through which the computer gains access to the Internet. Here in the "Access" tab in the "Connection home network"Select the connection we created" and check the boxes, as in the picture.

Click "OK" and close all windows. Now you need to go to "Change advanced sharing options" and enable network discovery. If necessary, you can enable access to files and other resources here.

We save the settings and close all windows. Now, to share WiFi from a Windows 7 laptop, you just need to start the created network. To do this, you should write a simple command in the command line: netsh wlan start hostednetwork. Press "Enter".

Remember that the distribution will only be carried out while the laptop is running, and even the device going to "sleep" stops the distribution. After each reboot, you will need to re-register the netsh wlan start hostednetwork start command.

How to create a WiFi hotspot in Windows from the command line: Video

Using third-party programs

How to distribute wifi from a laptop with Windows 7 using a special program? Everything is extremely simple. All programs work according to the same principle, therefore, their setting comes down to three general parameters:

Choosing a group name;
A key to connect to a virtual group;
Selecting the connection through which the laptop gains access to the global "web";
Selecting the type of network.

There are actually a lot of such programs, and many of them are absolutely free. For example, one such program is mHotSpot. It is easy to customize. However, it should be noted that in order to distribute the Internet via WiFi, the laptop must be connected to a cable Internet. The fact is that, unlike previous way, mHotSpot cannot use one wireless adapter to access the Internet and distribute it at the same time.

How to share Wi-Fi from a windows 7 computer

Nowadays, not a single person can do without the Internet. Cable internet is in almost every apartment. However, it is convenient to use it on a stationary computer or laptop. However, what if there are other mobile devices in the house, such as a tablet, smartphone, and so on? Mobile Internet is quite expensive, and the speed is lower. Because of this, the question arises, how to distribute the Internet via WiFi on a computer with windows 7?

It should be noted that the easiest way to create a virtual WiFi network is to purchase wireless router, but what to do if this is not the case? Everything is very simple.

How to share WiFi using a laptop

First of all, it should be said that today there are two ways how to distribute WiFi Internet from a computer with windows 7:

Using the built-in windows tools.
Using special software.

It should be noted that creating a virtual WiFi group using built-in tools operating system can be done in two ways:

How to share WiFi in windows 7: Video

Setting up a network environment for distributing WiFi from a computer

It should be noted that any modern laptop supports the Virtual WiFi function, which makes it possible to distribute the Internet via WiFi. But now let's look at how to organize the distribution of the Internet by setting up the network environment (Network and Sharing Center).

To do this, go to the "Start" menu and launch the "Control Panel". In the window that appears, you need to launch "Network and Internet", then go to the "Network and Sharing Center" section. Or click on the network connection icon in the tray and launch the Network Control Center.

Here you should start the "New connection or network settings", then click the "Computer-to-computer settings" button and click "Next" and "Next" again. In the window that appears, you must fill in all the fields and save the settings made.

Fill in the fields for configuring the virtual network:

Wireless network name: can be anything you want (you can use letters and numbers, as well as their combination).
Password: can also be anything you like. It is required to connect to a group.
Security type: It is recommended to select "WPA2-Personal" here.

After filling in all the fields, you must check the box "Save the parameters of this network" and click "Next". After that, the system will create a virtual network. In the window that appears, you need to click "Enable Internet Connection Sharing". Close all windows.

Configuring WiFi sharing using the command line

First of all, it must be said that this method is only suitable if the driver of the wireless adapter supports the Virtual WiFi function.

Create virtual WiFi network using the command line. To do this, you need to launch notepad and write the following line in it: netsh wlan set hostednetwork mode = allow ssid = My_virtual_WiFi key = 12345678 keyUsage = persistent.

Here ssid is the group name and key is the password. That is, in the example, the group name is My virtual WiFi, and the password for the connection is 12345678. Any password can be used. After that, the file must be saved. Next, you need to change the extension and file name.

To do this, you need to right-click on the saved file and select “Rename file”. It is recommended to name the file the same as you named your network. After the name of the file, put a period, and after the period, instead of .txt, you need to write .bat. Next, you should run the file with administrator rights. To do this, again click on the file with the right mouse button and select the "Run as administrator" item.

All the above described actions can be performed in the command line itself. You can do it like this. In the "Start" menu in the search, we write "Command line" and run it as administrator by right-clicking. A command line appears, in which you need to write netsh wlan set hostednetwork mode = allow ssid = My_virtual_WiFi key = 12345678 keyUsage = persistent as shown in the photo.

This will cause the system to install this command. It is worth noting that new hardware should appear in the task manager. It's easy to check. In point " Network adapters”A device named“ Microsoft Virtual WiFi Mini Port Adapter ”should appear.

Next, you need to go to the "Network and Sharing Center" and select "Change adapter settings". A shortcut should appear here titled “Wireless Network Connection 2”. The label should show the status “No connection” as shown in the picture.

The next step is to launch the network. To do this, we call the command line again and write in it:. This will launch the created network. At the same time, a virtual access point (SoftAP) should work. In this case, the “Wireless Network Connection 2” label will change its status to “My virtual WiFi”.

In order to provide other members of the group with the opportunity to access the Internet, follow these steps:

Go to the Network and Sharing Center.
Go to the item "Changing adapter parameters".
and find the connection through which the computer (or laptop) is connected to the Internet, right-click on it and select “Properties”;
Here, in the "Access" tab, do the following:
- In the “Home network connection” item, select the created virtual group (in our case, “Wireless network connection 2”).
- After that, check the box “Allow other network users to use the Internet connection of this computer”.
- Click "Ok" and that's it. The network is fully configured and ready to use.

To manage a virtual group, there is a set of simple commands that must be written in the command line:

How to Share WiFi on Laptop Using Command Line: Video

Sharing WiFi from a computer using special software

The lightest and simple method sharing the Internet via WiFi from a computer is the use of third-party software.

There are a lot of such programs. They can be paid or free. At the same time, setting up all these programs comes down to three main parameters - the network name, password, and also the choice of the connection through which the computer gains access to the Internet. Moreover, you must come up with a name and password yourself. After making these simple settings, you should press the "Start Hotspot" button.

Some of the most popular programs are:

Connectify.
My Public WiFi.
mHotSpot.
Virtual Router Plus.

How to share WiFi in windows 7 using Conectify Hotspot: Video

Which of the above WiFi distribution methods to use is up to you. Of course, third-party programs are much easier to configure, but the built-in tools are more stable.

How to distribute Wi-Fi from a computer without a router

How to share Wi-Fi from a laptop on windows 7

How to distribute Yota over Wi-Fi with windows 7

How to share Wi-Fi from laptop windows XP

bezprovodoff.com

Configuring the distribution of WiFi from a computer windows 7 and XP

1 Laptop as a router on an old OS
2 Settings on the current OS

It is not necessary to buy a router to have WiFi in the house. A laptop, to which an Ethernet cable is connected, can also distribute the Internet around the apartment. There are enough instructions on the network on how to do this on windows 7 and older, but if you have XP, do not rush to do it. complete reinstallation operating system.

Laptop as a router on an old OS

On any operating system from Microsoft, the distribution of the Internet via WiFi can be organized both by built-in tools and third party utilities... But why clutter HDD redundant programs? On windows XP, follow these steps step by step:

Open “Start” and go to “My Computer”.
Select “My Network Places” in the left pane.
Next, go to the "Display network connections" section.

Click on the shortcut “ Wireless connections"Right-click and open the" Properties "item.

Next, go to the address “Wireless & networks” - “Advanced”.
Here select the "Computer-to-computer" option and confirm your choice.
Click “Add” and enter the details of the created network (name, password, encryption method) and confirm.
Next, open the "General" tab and highlight the IPv4 item, click on the "Properties" button.
In this window, set the indicator to the item "Use the following IP ..." and enter the following data:

IP - 192.168.1.1

Subnet mask - 255.255.255.0

The distribution has been created, it remains only to enable the ability to connect to it from other devices within the range of the wireless network. To do this, return to the network connections window and right-click on the local connection to open its properties. You need to put an indicator in front of the item "Allow other network users ...".

The WaiFai distribution should now be fully functional.

Settings on the current OS

Similar actions can be done with windows 7. To distribute Wi-Fi from a computer or laptop, you can, as in the previous example, create a new virtual network step by step. The only difference is in some steps.

You need to look at the "Network and Sharing Center".
Run “Setting up a new connection…”.

See also: Windows 7 computer does not restart

Then go to “Configuring the wireless network“ Computer-Computer ”and click the“ Next ”button.

As you can see, the steps are similar. In the new window, enter the network name, encryption type and password. Save changes and click "Next". The only thing left to do here is to apply the “Enable Sharing…” setting.

But that is not all. So that you can connect to WiFi from other devices, go back to the "Network and Sharing Center" and on the left side of the window find the line "Change advanced settings ...".

After opening this menu, make the items highlighted in the screenshot active:

Ready! But windows 7 offers another, more advanced and simpler way to organize the distribution of WiFi from a computer or laptop equipped with wireless adapter... This is using the command line. Find her in the list of all windows programs and open with administrator rights (right-click on the shortcut and select the appropriate item).

In the window that opens, enter a command of this type:

netsh wlan set hostednetwork mode = allow ssid = "new network name (at least 8 characters)" key = "password"

and press Enter. it quick creation distribution, and for the Internet to begin to be distributed from the laptop, use the command:

netsh wlan start hostednetwork

It remains only to go to the "Network Control Center ..." - Properties Local connection(the one that is the wire through which the Internet “gets” into the apartment). Open the "Access" tab and check both boxes. Now WiFi sharing is working.

(Visited 15,041 times, 42 visits today)

windowsprofi.ru

How to distribute Wi-Fi from computer to phone? | Your setevok

Connecting your phone to a computer via wifi will significantly save expensive 3G traffic and create your own wireless network even without access to a router. And in this article we will look at how to distribute wifi from computer to phone, and also touch technical features such a non-standard wi-fi network.

So, among the most common ways to connect a phone to a computer via wifi is the creation of a wi-fi connection using windows and using the command line. By the way, the computer here acts not only as an access point, but also as a repeater.

How to distribute wi-fi from computer to phone via windows 7 interface?

To begin with, let's analyze the option with a wi-fi connection using windows 7: this is the simplest and universal way creating a network between the computer and the phone.

Please note that the names of folders and files for other versions of windows may differ slightly.

- To transfer files from computer to phone via wifi, the PC must have active connection to the Internet;
- Create a new connection "Wireless network computer-computer";

- Fill in the network name (for example, let's call it “MyNewNetwork”), security type (WPA2 - PSK) and key (create a password) for the created network, and click “Save settings” - “Next”;

- Click on "Enable Connection Sharing". This completes the transformation of the computer into an access point. In the "Sharing Settings" section, set "enable" on all required items

Now from your phone, search for available wifi points, find the network you created ("MyNewNetwork") and connect to it by entering the security key.

How to distribute wi-fi from computer to phone via the command line?

To distribute the Internet from computer to phone via wifi:

Open "Command Prompt";

Enter "netsh wlan set hostednetwork mode = allow ssid = wifi phone key = 000000 keyUsage = persistent" (accordingly, all commands are entered without quotes);

- a notification will appear about the successful placement of the network you created ("MyNewNetwork");
- in the "Device Manager" ("My Computer" - "Management") there will be a device named "Microsoft Virtual WiFi Mini-Port Adapter";
- click on the created connection and open "Property" - "Access";
- set both options for sharing and select a new connection from the list.

To enable the network, open Command Prompt again and type “netsh wlan start hostednetwork”.

This command must be entered every time you turn on the computer - this way you determine when to grant access to your network.

To disable - "netsh wlan stop hostednetwork".

To change the username or password - "netsh wlan set hostednetwork mode = allow ssid =" WifiNewName "key =" New password "keyUsage = persistent".

For password recovery - "netsh wlan show hostednetwork setting = security".

In addition, to make it easier to connect your phone via wifi to a computer, you can make a mini-utility that will contain a command to start the network:

Open Notepad or the Notepad ++ editor enter the command to start the network;

Save the file with the .bat extension in the "File name" column, for example - new-wifi.bat;

After saving the program, to start the network, just open this file.

.Bat files, and especially .vbs files, require the included english layout keyboard.

However, such a network has a significant drawback: the computer will distribute Wi-Fi to the phone and other devices only in the "active" mode of operation, but the network will become unavailable even if the PC simply goes into sleep mode. Therefore, it is recommended to immediately turn off the "Hibernation" mode.

How to connect a phone to a computer via wifi: automatic network operation

You can also customize automatic switching on and turning off the network if the Internet needs to be distributed for a limited time.

Create 2. bat file: one with an on command and the other, respectively, with an off. For this:

- "Start" - "Control Panel" - "System and its maintenance" - "Administrative Tools" - "Task Scheduler" (or maybe "Scheduled Tasks");
- Set your task for each file (enable / disable): let's say that you will have Internet distribution every day from 12:00, and the second file with a shutdown will be launched every day at 16:00.

Sometimes the error "Failed to connect to the network ..." appears, or there is simply a "permanent" receipt of an ip-address without access to the Internet.

The reason that wi-fi does not work on the phone (but on the computer does) may be:

Connection blocking " Windows firewall»

Antivirus blocking the connection.

tvoi-setevichok.ru

How to distribute the Internet from a computer via Wi-Fi? detailed instructions

windows can turn your computer or laptop into a wireless hotspot if you allow it to share the internet over Wi-Fi. Configuring the distribution of the Internet on windows 7, 8 and 10 is somewhat different from each other. Therefore, to install the distribution of the Internet via Wi-Fi, we will consider a separate instruction for each windows operating system. Go.

Sharing capability wired connection to the Internet of your computer or laptop for connecting wireless devices is available in windows 7, 8 and 10 without installing additional components. Creating such connections, which are an example of peer-to-peer networks, is as easy as shelling pears. In general, a classic example of a peer-to-peer network is a computer-switch-computer network, and computers have the same rights in this network. And in our case, wireless network interface Wi-Fi will be in charge of the switch role.

Please note when setting up a peer-to-peer network using Wi-Fi adapter and your computer to distribute the Internet via Wi-Fi, the current Wi-Fi connection, if any, will be disabled. Since the Wi-Fi adapter will be used to distribute the Internet and it will no longer be able to receive it.

I want to inform you that here I do not give how, after all the settings, to find the resulting access point on a smartphone or laptop and connect to it. Due to the flourishing of the smartphone market, I think that everyone can connect to a Wi-Fi network.

How to distribute the Internet from windows 10

1. Launch the Parameters in any way convenient for you: by pressing + I on the keyboard, through the START menu, clicking on the icon. On home page settings, click the Network & Internet button.

4. In the Change Network Information window, give the network a name and enter your password with at least 8 characters.

That's all you need to do in windows 10 to share the Internet from your computer via Wi-Fi. This is one of best features anniversary update windows 10.

We distribute the Internet via Wi-Fi from a laptop or computer in windows 8

Unfortunately, windows 8 does not have graphical interface to configure a peer-to-peer network, so we will use the command line in some steps to configure the Internet via Wi-Fi.

I must say that this method of distributing the Internet via Wi-Fi, described for windows8, without any additions is suitable for windows 7. All steps are completely identical.

1. Open Network connections In a way convenient for you, for example, by pressing the combination + R on the keyboard and typing in the Run command ncpa.cpl in the window, click OK.

3. Switch to the Sharing tab and enable the Allow other network users to use this computer's Internet connection option. If the second option is Allow other network users to control Internet connection sharing. Then click the OK button.

4. Next, you need to run the command line with administrator rights. Open the START menu and type cmd. In the search results, on the Command Prompt line, right-click and select Run as administrator from the context menu.

5. At a command prompt with administrator privileges, enter:

Netsh wlan set hostednetwork mode = allow ssid = "" key = ""

Where is the name of your network and the password for connecting to the network, which will need to be entered to connect to the access point. In this case, the connection will be based on WPA2-PSK (AES) encryption.

Netsh wlan start hostednetwork

From now on, your computer or laptop is ready to distribute the Internet via Wi-Fi.

7. At any time, you can view the connection information, where you can find out which channel your connection uses, the name of the access point, the type of authentication, type of wifi and the number of clients connected to the network.

Netsh wlan show hostednetwork

8. Stop broadcasting Wi-Fi distribution Internet using the following command:

Netsh wlan stop hostednetwork

Sharing the Internet via Wi-Fi in windows 7

As mentioned earlier, you can configure the distribution of the Internet in a way that is suitable for windows 8. But we will consider using a computer-to-computer network (Ad-hoc) to distribute the Internet via Wi-Fi. This method is interesting in that you do not need to use the command line to configure the distribution.

1. Open the Network and Sharing Center in the Control Panel. In the Change network settings section, click on Set up a new connection or network.

2. Then, in the window that opens, select Computer-to-computer wireless network settings and click Next.

The name of the network - come up with your taste;
Security type - choose WPA2-ptrsonal;
Security key - set a password that will need to be entered to connect to the network.

4. The system will automatically configure the distribution of the Internet via WiFi and show a window that is ready to connect to Wi-Fi networks with the specified parameters. In the window that appears, click Turn on Internet Connection Sharing.

We distribute wired Internet through the application

We install, launch, specify the network name (SSID), set the desired password, and select our wireless connection that we want to distribute. Click the Start Virtual Router button and you're done. Below you can see a list of connected devices. It couldn't be easier.

Setting up Internet sharing over Wi-Fi may seem like a hassle to some, but it's actually not that difficult. It all depends on which version of windows you are using. In addition, you can always use a third-party application, working with which comes down to even more easy way make an access point out of your computer or laptop.

Now you can always use this article to distribute your Internet channel via Wi-Fi, even if you are not at hand Wi-Fi router.

userello.ru

How to distribute Wi-Fi from a computer - without a router, to any device

Many of us, now at home, have not only a TV and a computer, but also a phone, a tablet and others. electronic devices... And there is only one internet connection. In this regard, the following questions arise: How to distribute Wi-Fi from a computer without a router? Is it possible and how to distribute the Internet from a computer to a phone and other devices?

How to make it so that you can go online from all devices that we have at home? How to distribute Wi-Fi from a computer? How to make Wi-Fi on a computer without a router?

You answer that the distribution of wifi from a computer (laptop) is possible only thanks to a router? Then this post is for you. But is it possible to make a computer or laptop distribute wifi without a router, can a computer distribute wifi without a router. Undoubtedly!!!

Most likely, you know what it is to distribute wifi, so we will not describe it in detail, but we will answer the above questions.

How to share wi-fi with windows computer 7, 8, 10, without a router for any device?

To connect several devices to the Internet at once, including wirelessly, most often a classic Wi-Fi router is used. Modern routers do an excellent job of providing a reliable and interference-resistant connection, but a router may not always be at hand. A standard situation - you decided to spend a few days at the dacha and took with you only a laptop with a USB modem. It would be nice to be able to connect to the Internet through it, not only on your laptop, but also on mobile gadgets such as a smartphone or iPod. Those. there is a need to use a laptop as a separate Wi-Fi access point, to which other devices can be connected by analogy with a conventional router. If anyone did not know, the functionality for the implementation of such a task is built into the operational Windows systems 7/10, the main thing is that your laptop is equipped with a wireless adapter.

So, in this article, in a step-by-step mode, we will consider all the main methods of distributing Wi-Fi from a laptop running under Windows control 7 or Windows 10. The access point will be created both by the system itself and by using the most popular third-party programs. The source of the Internet for the laptop will be a 3G modem of one of the operators mobile communications... However, all the considered schemes will work in the case of a conventional wired Internet connection.

Creating a virtual Wi-Fi router via the command line

For users who are not friendly with the command line, this method will probably seem rather complicated and tricky. However, if you follow the instructions exactly, then no problems should arise. Most importantly, this method is universal, i.e. works in both Window 7 and Windows 10, and does not require the installation of any additional applications.

First of all, we will launch the command line itself as an administrator. This can be done through the search bar of the Start menu by right-clicking on the "Command line" item and selecting "Run as administrator". In Windows 10, just right-click on the Start menu icon and select "Command Prompt (Admin)".

In the console, immediately execute the command netsh wlan show drivers to make sure that in this moment The Wi-Fi adapter of the laptop is capable of operating as an access point. After entering the specified command, press Enter and look for the line "Hosted network support".

If there is “Yes” next to it, then everything is in order and you can proceed to the next stage, but if “No” is written, then it makes no sense to continue, since the adapter is not ready for Wi-Fi distribution. The reasons for the lack of support for the hosted network can be very different - from incorrectly installed (or old) drivers to incompatibility current version Windows with installed equipment... We have devoted a separate article to ways of solving such a problem (see ""), so now we will not focus on them and will go further.

At this stage, we need to enter a command to initialize the created virtual host Wi-Fi. It looks like this:

netsh wlan set hostednetwork mode = allow ssid = InternetNout key = 87654321

InternetNout is the name of the wireless network;
87654321 - password.

If everything went well, a corresponding message will appear, as in the screenshot.

Now we launch our network with the command netsh wlan start hostednetwork, as a result of the execution of which we should see the message "Hosted network started".

We need to check if a new wireless connection has really appeared. We go to the "Network and Sharing Center" and find the network we created InternetNout.

True, she still has the status "Without access to the network", which categorically does not suit us. In order for a virtual Wi-Fi point to be able to distribute the Internet, it must access directly the connection through which the laptop itself receives the Internet. In our case it is Ethernet 3.

Click on it, and then click on the "Properties" button.

Next, go to the "Access" tab and put a checkmark next to the item "Allow other network users to use the Internet connection of this computer." Below in the drop-down list, select the target connection. We have this "Connection by local network* fourteen".

Click "OK" to apply the parameters. Now in the network management center status InternetNout changed to "Internet", which is what we wanted.

We take a smartphone in our hands and in the corresponding settings section we check whether the device sees the created Wifi hotspot... If all the steps described above are completed, then the network will certainly be detected. We click on it, enter the password and wait for the connection to occur.

The laptop will start distributing the Internet to our smartphone via Wi-Fi. To display information about the network, for example, the number of connected clients, the command netsh wlan show hostednetwork... To disconnect the access point, run the command netsh wlan stop hostednetwork.

Sharing Wi-Fi using a computer-to-computer wireless network in Windows 7

This method allows you to create an access point without any manipulation of the command line, but the technique works only in Windows 7. First, open the "Network and Sharing Center", and then click on the link "Set up a new connection or network".

In the window that opens, select the item "Configuring the wireless network computer-computer", and then click "Next".

Fill in the fields "Network name" and "Security key", then click "Next" again.

A window will appear informing you that the network is ready for use. At the same stage, it is proposed to enable Internet Connection Sharing. This must be done by clicking on the corresponding link.

Now all that remains is to wait for the operation to complete.

To see the newly created network, in the "Network and Sharing Center" on the left you need to go to the link "Manage wireless networks".

Here you can manage connections - delete, add, change properties, set priority.

Mobile hotspot in Windows 10

In Windows 10, it is possible to very quickly organize an access point for mobile devices via the Parameters utility. Launch the application and go to the "Network and Internet" section. In the menu on the left, select the item "Mobile hotspot".

If the laptop is connected to the Internet by wired or using a USB modem, on the page that opens, it will be possible to allow the sharing of the Internet connection by several devices. That is, the same Wi-Fi access point will appear, through which the Internet will be distributed from the laptop to other devices. To activate the hotspot, move the slider located at the top to the "On" position.

The network name and password for accessing it will be indicated below (they are generated automatically). The network exists (we call it DESKTOP-EHJUIN4 3118), but does not yet have access to the Internet, which can be verified by going to the network control center.

To open this access, you need to repeat all the same actions that we performed when working with the command line. We go to the Properties of the connection responsible for the "delivery" of the Internet to the laptop, and on the "Access" tab, put a tick next to the corresponding item. Below, select the desired connection from the list, for which we open access to the Internet. We save the changes with the OK button.

Make sure the network is now connected to the Internet.

We connect to it on a smartphone or any other device.

Popular programs for distributing Wi-Fi from a laptop

If all of the above methods do not suit you or you did not manage to distribute the Internet with the help of them, it makes sense to use third party programs, of which there are a great many. We will consider two of the most convenient in our opinion.

MyPublicWiFi

This application has many positive feedback and has a simple interface that allows you to start distributing the Internet via Wi-Fi from a laptop after a couple of clicks. Download the program from the official website mypublicwifi.com and install it on your portable computer... During installation, you will need to restart your laptop. Next, run the utility and set the settings for the virtual access point.

We register the name of the network and the password, we also indicate the connection through which the Internet will be distributed via Wi-Fi. The virtual network is launched by pressing the "Set up and Start Hotspot" button. The program has a minimum of settings, so it will not be difficult to understand them.

Connectify Hotspot

Another popular program that provides the ability to easily distribute Wi-Fi from a laptop to anyone portable devices... Download the Russian-language version of the utility at http://www.connectify.me/ru/, install it and restart your computer. We launch the program. On the "Settings" tab, we see that the application can work in several modes. By default, the "Wi-Fi hotspot" mode is selected - this suits us. We set the parameters of the virtual router approximately as in the screenshot below.

Please note that we have created a new wireless access point, receiving the Internet through the same Wi-Fi. The program allows this configuration. After completing all the settings, we launch the point by pressing the button at the bottom of the window. After a few seconds of waiting, the network should appear. We find it on a smartphone and connect, having previously entered the password.

We did not have any difficulties - after a successful connection, the distribution of the Internet from the laptop proceeded as if it were a regular router. All users connected to your Wi-Fi will be displayed in the Clients tab of the Connectify Hotspot app.

Note that to create an access point, we used a free version of the program, the functionality of which turned out to be quite enough. If you want advanced features, then, of course, you have to pay.

This is, perhaps, all that we wanted to tell on the topic of distributing Wi-Fi from a laptop using Windows 7/10 or using special programs... If virtual router does not want to be created, then, most likely, there are problems with the adapter drivers or it does not support operation in the access point mode at all (the latter is unlikely). If the network appears, but after connecting to it, the sites do not load, then the general access to the Internet is not open or is blocked by a firewall / antivirus. Write about the difficulties that arise in the comments below, and we will jointly try to help you.

Windows can turn your computer or laptop into a wireless hotspot if you let it share the Internet over Wi-Fi. Configuring Internet sharing on Windows 7, 8, and 10 is somewhat different. Therefore, to install the distribution of the Internet via Wi-Fi, we will consider for each operating system Windows standalone instructions. Go.

The ability to share your computer's or laptop's wired internet connection to connect wireless devices is available in Windows 7, 8, and 10 without installing additional components. Creating these kinds of peer-to-peer connections is a snap. In general, a classic example of a peer-to-peer network is a network of the form computer - switch - computer, moreover, that computers have the same rights in this network. And in our case, the Wi-Fi wireless network interface will be responsible for the role of a switch.

Please note when setting up a peer-to-peer network with using Wi-Fi the adapter of your computer to distribute the Internet via Wi-Fi, the current Wi-Fi connection, if any, will be disabled. Since the Wi-Fi adapter will be used to distribute the Internet and it will no longer be able to receive it.

How to share the Internet with Windows 10

1. Start in any way convenient for you: by clicking + I on the keyboard, through the START menu by clicking on the icon. On the main settings page, click the button Network and Internet.

4. In the Change Network Information window, give the network a name and enter your password with at least 8 characters.

That's all you need to do in Windows 10 to share the Internet from your computer via Wi-Fi. This is one of the best features of the jubilee Windows updates 10.

We distribute the Internet via Wi-Fi from a laptop or computer in Windows 8

Unfortunately, Windows 8 does not have a graphical interface for configuring a peer-to-peer network, so we will use the command line in some steps to configure the Internet via Wi-Fi.

I must say that this method of distributing the Internet via Wi-Fi, described for Windows8, without any additions is suitable for Windows 7. All steps are completely identical.

1. Open Network connections in a convenient way for you, for example, by pressing the combination + R on the keyboard and typing in the window Execute command ncpa.cpl, press the button OK.

3. Switch to the tab Access and enable the parameter Allow other network users to use this computer's Internet connection... If the second parameter Allow other network users to control Internet connection sharing... Then press the button OK.

4. Next, you need to run the command line with administrator rights. Open the START menu and enter cmd... In search results on line Command line right-click and select from the context menu.

5. At a command prompt with administrator privileges, enter:

Netsh wlan set hostednetwork mode = allow ssid = " "key ="

Where this is the name of your network and The password for connecting to the network, which will need to be entered to connect to the access point. In this case, the connection will be based on WPA2-PSK (AES) encryption.

Netsh wlan start hostednetwork

From now on, your computer or laptop is ready to distribute the Internet via Wi-Fi.

7. At any time you can view the connection information, where you can find out which channel your connection is using, the access point name, the type of authentication, the type of Wi-Fi and the number of clients connected to the network.

Netsh wlan show hostednetwork

8. Stop broadcasting the distribution Wi-Fi internet can be done with the following command:

Netsh wlan stop hostednetwork

Sharing the Internet over Wi-Fi in Windows 7

As mentioned earlier, you can configure the distribution of the Internet in a way that is suitable for Windows 8. But we will consider using a computer-to-computer network (Ad-hoc) to distribute the Internet over Wi-Fi. This method is interesting in that you do not need to use the command line to configure the distribution.

1. Open in Control Panel Network and Sharing Center... In the Change network settings section, click on Setting up a new connection or network.

2. Then, in the window that opens, select and click Further.

Network name- we come up with it to your taste;
Security type- choose WPA2-ptrsonal;
Security key- set a password that will need to be entered to connect to the network.

4. The system will automatically configure the distribution of the Internet via WiFi and show the window of ready connection to the Wi-Fi network with the specified parameters. In the window that appears, click Enable Internet Connection Sharing.

We distribute wired Internet through the application

We install, launch, specify the network name (SSID), set the desired password, and select our wireless connection that we want to distribute. Push the button Start Virtual Router, and you're done. Below you can see a list of connected devices. It couldn't be easier.

Setting up Internet sharing over Wi-Fi may seem like a hassle to some, but it's actually not that difficult. It all depends on what Windows version You are using. In addition, you can always use a third-party application, working with which comes down to an even easier way to make an access point from your computer or laptop.

Now you can always use this article to distribute your Internet channel via Wi-Fi, even if you don't have a Wi-Fi router at hand.

Often, users have a need to provide several gadgets with a worldwide network. However, the purchase of special equipment will require certain funds. But there are other ways as well. In this article, we will tell the readers of our blog how to distribute WiFi from a laptop to Android tablets or smartphones.

There are several ways to distribute the Internet from a laptop to Android devices, which we will now talk about.

In order to provide wifi distribution from a Windows laptop to Android (or any other device), several conditions must be met, and they are mandatory regardless of which method you prefer.

The laptop must be equipped with a Wi-Fi adapter (in the case of stationary computer, you will probably need an external receiver connected to the USB / PCI slot).
The Wi-Fi adapter must have a driver that supports Virtual WiFi. If the virtual network does not start, then you will need to update the Wireless adapter to the latest current version.
The laptop must be connected to the Internet, which will be active.

Using Windows 7 tools

This option is quite simple and does not require additional software to be installed. However, you need to take into account that the tools with which you can distribute wi-fi are possessed by an OS with a version of at least Professional.

So what should we do:

On your laptop, in the lower left corner of the screen, click "Start" and go to the Control Panel:

Now select "Network and Sharing Center":

* If sorting is set by categories on your PC, select the "Network and Internet" item.

Here we have to click on the line "Setting up a new connection or network":

From the list of connection options that opens, select "Computer-computer" and click the "Next" button:

Now we enter the network name (optionally), create a password and put a tick in the "Save the parameters of this network" line so as not to enter the password every time you connect:

That's all, now you can distribute the Internet from your laptop (or computer) by connecting an Android device.

Using the command line

First you need to check if it is possible in principle to distribute from your PC. To do this, on a laptop, press the button " Start"And enter in the search bar" cmd»:

After the system finds the program, open it, this will be the command line:

Now we need to enter the command " netsh wlan show drivers"(Without quotes). After that, information will open in which we find the line Hosted network opposite it should be written “ Yes"(For settings in Russian:" Hosted network support»: « Yes»):

So, if our laptop supports distribution, then we return to the command line and enter the settings for the network distributed by the device: netsh wlan set hostednetwork mode=allow ssid=» MyWIFI"Key =" 12345678 ". Where ssid- the name of the network, it is set arbitrarily (in the screenshot MyWIFI), a key- password, we also specify arbitrarily (in the screenshot “ 12345678 «):

Now it remains to configure our newly created network. To do this, follow the path described above: "Start" - "Control Panel" - "Network Control Center", on the left side of the window we find "Change adapter settings", open, find your network, right-click on it, in the drop-down window activate "Properties":

In a new window on top panel click the "Access" tab and, by checking the box, give permission to other users to use the Internet connection from their PC. In the field below, select your network and click "OK":

Now we can connect our Android device via Wi-Fi to the Internet, which is distributed by a laptop.

Possible problems:

The smartphone does not connect to the created network

Most likely, a firewall, antivirus, or other similar program is blocking the connection. Disable them, and if everything started working, then you need to add your connection to the antivirus exceptions.

Gadgets are connected, Wi Fi is active, but the Internet does not work.

Perhaps in the settings the general access to the Internet was not allowed. You need to make sure that the Internet is working on the distributing laptop, check the settings for permission to public access, restart the PC and restart the network.

Starting the network after restarting the computer

This does not require entering the network or password, just enter the following command - netsh wlan start hostednetwork

How to open an access point on a smartphone

So if one of the above methods gave positive result, it remains for us to provide access to Wi-Fi on the Android device. This is done quite simply:

* Items on your device may have a different name, for example: “ Settings» — « Yet» — « Modem mode» — « Wi-Fi hotspot».

Distributing wifi from a laptop using third-party software

If none of the described options suits you, then you can easily and simply get what you want by installing one of the applications. I'll tell you about Connectify, with which it is possible without special efforts distribute the internet.

You can download Connectify from the developer's official website, where you can learn more about the functionality and capabilities of the program.

I, briefly presenting the program, will say that this is a tool that programmatically provides the distribution of the Internet without the help of a router (router), while assigning a Wi-Fi adapter built into the motherboard as a distributing device.

The application is distributed for paid and free of charge... The free version provides the use of the WiFi sharing function. After downloading Connectify, we will need to agree with license agreement... Then, after waiting for the installation to complete, we reboot the system (button Reboot now).

After restarting, the corresponding icon will appear on the desktop, open the program, go to the section “ Settings" (settings). Here we are interested in three points, in which we need to enter the following data:

« Hotspot Name"- the name of the network, in free version the one you see in the screenshot is available.
« Password»- a password containing at least eight characters.
« Internet to Share"- here, by clicking the button, we select the active connection from the drop-down list, which we will use

That's all the settings, it remains to press the button " Start Hotspot"And start the distribution process. We will see that the WiFi sign has turned blue, and in “ Disconnected Clients»The changed state of the access point and the type of encryption will appear.

You can connect your Android smartphone to the created network (activate the access point and enter the password), and if everything went well, a message about connecting a new device will appear below:

If you still have questions on how to distribute Internet to Android from a laptop, write to us, and we will be happy to answer them. And I have nothing more to add. Good luck!