To configure any of the ZTE line routers, it is first recommended to prepare authorization data for the Rostelecom Internet connection, since you will not be able to activate the network without them. In most cases, the provider uses the PPPoE type of service connection. These parameters are used to establish communication using ADSL and Ethernet technology. There are also less common options for connecting services that can be used when conducting a fiber-optic cable directly to an apartment or private house client.

Configuring Rostelecom parameters for ZTE routers

ZTE is one of the largest companies in the global electronics market. In addition to the manufacturer's smartphones, which have recently gained immense popularity, which have a lower cost than similar products from LG and Samsung brands, but at the same time are not inferior to them in terms of characteristics and quality, the company also occupies a confident position in the field of network equipment.

ZTE provides its customers with a wide range of devices to create a home or corporate network... For users who need the Internet outside the city, where there is no way to create a connection by wired, the manufacturer offers ZTE modems MF 190, distributed both with native (factory firmware) and with already built-in modification from Rostelecom.

These can be connected directly to a computer or using routers that support the appropriate connector and technology.

Attention! There is no way to reflash ZTE MF 190 modems from Rostelecom or other operators using official methods. For such tasks, the Dc-Unlocker program is usually used.

Also in the line of network equipment, ZTE also has routers, for example, the H108N, which was adopted by users as an Ethernet modem of Rostelecom for setting up high-speed home and work networks.

Preparing to set up equipment

Before setting up ZTE routers under Rostelecom, for example, model E5501, you need to check the equipment configuration, which contains:

• power supply unit (12V converter);
• at least one Ethernet cable.

Of course, in the newly unpacked box from the device there will also be a disc with software, a warranty and a lot of literature, but these components do not play an important role in setting up a ZTE modem under Rostelecom.

Attention! Even if you only want to use the Internet via Wi-Fi, an Ethernet cable is in any case an indispensable component that is needed for initial setup.

To connect the device, the first thing you need to familiarize yourself with are the ports on the rear panel.

Having deployed the ZTE E5501 with the functional connectors, as on the ZXV10 W300, here you can find:

• four LAN ports;
• Ethernet port;
• power cable connector.

The ZTE H108N model will have one difference from the above modems, namely a connector for an ADSL cable (telephone cable), since this router is designed for the Internet over a telephone line. This will not significantly affect the overall sequence of connecting network equipment. First of all, we connect the power supply to the outlet and the port on the router, and then insert the Internet cable into the WAN or ADSL port (depending on the modem model, one of these ports will be present). Now we find the RJ45 connector (standard network input) on the computer and connect it using an Ethernet cable to the corresponding port on the router. Since in our case there are four connectors, you can connect the cord to any one.

Attention! If the ZTE H108N is configured, then in addition to the described sequence, it is also recommended to connect a splitter that filters the Internet and network signals. This will allow you to use two provider services at the same time.

When all the cords are connected, you can turn on the equipment, which is done using the button on the rear panel.

Now let's move on to the front of the device. It contains indicators that will help you learn about the status of the options when setting up the ZTE ZXV10 W300, H108N or E5501 modems for Rostelecom. For example, data is displayed here about:

• in which of the connectors the computer is connected;
• is Wi-Fi working;
• is there a connection to the provider and the Internet.

Setting up an Internet connection on ZTE ZXV10 W300, ZTE H108N, ZTE E5501

When the connection is complete, you can proceed to setting up modems for Rostelecom, which we will do using the ZTE ZXV10 W300 as an example. We go from a computer connected directly to the modem into the browser and register the IP of the router in the address bar. You can find it in the equipment passport. In our case, it will be 192.168.1.1. Now we enter the standard username and password, which are also indicated in the instructions for the modem (admin / admin).

After that, it will be redirected to the control panel of the device software. In the Network tab, select the WAN parameters and configure PPPoE connections according to the data provided by the provider. They can be found in the contract or on a special Rostelecom card.

Since the equipment supports Wi-Fi parameters and such a modem is usually purchased with the intention of connecting wireless devices to the network, you can configure the module's operation on the Wireless tab. Here we select the network name (SSID), and also create a security key that will prevent unauthorized clients from connecting to your wireless network.

From ZTE, depending on its type (portable or stationary), it is made in several stages. In the case of installing routers for private apartments or small offices first, a suitable place is selected, then the connection is made, and after that the connection parameters are entered.

Configuring WiFi ZXV10 H208L and ZTE ZXHN H208N router. detailed instructions settings in the "Router" mode and creation of a wireless WiFi network.

The ZXV10 H208L (ZTE ZXHN H208N) device combines the functions of an ADSL modem at the same time, wifi points access, client SIP telephony, in addition to the router. The modem has one external port - WAN (Wide Area Network) and four internal - LAN (Local Area Network). WAN is used to connect network internet cable to the modem. LAN ports provide connection of various devices (PCs, laptops) to the internal network. The modem is configured via the Web interface. To access it, you need a browser such as Google Chrome.

Customization features

We can configure it as follows: in Bridge mode (the Internet will be connected to only one computer), in Router mode, or open ports.

In Router mode, you connect to the Internet directly through your modem. The advantage of the modem in this mode is the ability to simultaneously use the Internet various devices(tablet, smartphone, PC, etc.). To set up wifi, you must first set up the Router mode.

Setting up wifi on byfly modems, in most cases, is a simple process that does not require special knowledge and skills. Please note that before configuring wifi on byfly modems, you should perform the following operations.

1. You need to install your modem model (ZXV10 H208L or ZTE ZXHN H208N).
2. Check if the modem is connected to personal computer or a laptop via a network cable.
3. Make sure you have a working connection when connecting to the Internet with a network cable.
4. Set up wifi on byfly modem according to the instructions.

Configuring to Router Mode

The ZXV10 H208L device (ZTE ZXHN H208N) is initially in Bridge mode, that is, there is only one PC access to the Internet, to switch to the Router you need to follow the instructions below.

Setting up the ZTE ZXHN H208N modem. Setup of the ZTE ZXHN H208N modem

Customization modem ZTE ZXHN H208N's router, customization WiFi, IPTV Setup of the ZTE ZXHN H208N modem in a router, the

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, customization master and manual internet, interactive TV, wi-fi

Launch your browser, preferably Internet Explorer, write the parameters of the router - 192.168.1.1

Read also

How to setup Xiaomi phone: Redmi, Note 4 are not others. Only basic optionsNewsRead the detailed annotation not useful tips how to set up a Xiaomi phone. Web, wifi, language not fingerprint sensor. The answer is simple in more than one article ...




How to check authenticity Samsung smartphone a50 Along with high technologies associated with new model Samsung phone A50, people tend to think that they can get the same features for a much lower price. Due to lack of awareness ...




Sometimes you are very annoyingly calling or sending messages from a subscriber who does not want to hear, in other words, this is just spam and similar unwanted contacts. In order to prevent this, it is enough to block them to get rid of it forever ...



Dropped an iPhone. The screen does not work If you drop the iPhone, the screen does not work, at first you need to calm down. The consequences of a fall are harsh, but there are effective ways to eliminate a malfunction in the phone without the help of others ...




How to install Russian language on HUAWEI smartphone(honor)?. Most of the world's smartphones are developed and assembled outside of Russia. Therefore, the main language of the smartphone interface is also not Russian. Usually, when you turn on your smartphone for the first time, you will be prompted ...

Open the browser, enter http://192.168.1.1 in the address bar

Will open new inset... Set Username to admin and Password to admin. Click the Login button.

Navigate to the Network Interface / Network menu.

Next, fill in the Connection name, you must select the PVC0 option, and if it is absent –Byfly.

You need to remove the Bridge connection. To do this, click on the "Delete" button.

A new tab will appear. Enter the name of your connection in the New Connection Name field, for example, PVC0. Next, go to the VPI / VCI field, where you should specify 0/33. Enter the information from your contract in the appropriate fields Username and Password, click the "Create" button.

If there is no Internet connection, it is worth checking the correctness of the Username and Password information.

Wi-Fi setup

To implement Wi-Fi settings on the ZXV10 H208L or ZTE ZXHN H208N device, press and hold the "Wlan" button for about 20 seconds, after which the corresponding indicator should blink. We enter the router settings as indicated above.

Go to the Network Interface tab.

Read also

How to change SmartHub region for Samsung KPosted 02/08/2017 by by andreyHow to change SmartHub region for Samsung K Preparatory TV setup Change IP address Install (unlock) Samsung smarthub From the off state ...




This 60+ wifi water leak detector only does the basics but it does them well There was an error emailing this page Sensentric SimpleSENCE Home Leak Freeze detectorWater leak detector when you are valid ...

How to connect a phone to a computer via usb: Solutions to the problem A very common problem for users who use ...




Oppo launches its new smartphone called Oppo A31. This device comes with many new features and modern technologies... 91mobiles recently posted a poster featuring the Oppo A31 designed to triple the rear camera setup ...

If you don't see your router's IP address in the list above. There are two additional ways to determine the IP address of your router:

1. You can also follow the How to Find Your Router Address guide.
2. Or you can use our free software called the IP address of the router.

Now that you have internal IP address your router, we're ready to go into it.

Login to the ZTE router via the web interface in a web browser

ZTE has a web interface for configuration. You can use any web browser you need to log into ZTE. For this example, we will be using Internet Explorer.

Enter the internal IP address of ZTE

Put the internal IP address of your ZTE in the address bar of your web browser. It looks like this:

Then press the Enter key on your keyboard. A dialog box will appear asking for your ZTE username and password.

ZTE router password and default username

You need to know the username and password to login to ZTE. All default usernames and passwords for ZTE are listed below.

H220N	HPN	blank
MF28B	none	none
MF65	none	smartbro
MF923	none	attadmin
MF93D	admin	admin
ZXDSL 831	ZXDSL	ZXDSL
Unite US	unknown	unknown
Z-917	none	admin
Z288L	admin	printed on router
ZXHN H208N	cytauser	cytauser
ZXHN H298N	user	user
ZXV10 W300	on	on

Enter your username and ZTE password in the dialog box that appears.

Steps to change WiFi password for SLT ADSL - ZTE

1. Open your browser and enter 192.168.1.1 and press Enter.

2. Then a pop-up window will open and ask you to enter your credentials. Enter the username as admin and password as admin and click the login button. (This is the default username and password for the SLT router configuration page, you can change it anytime after entering the router configuration page)

3. The configuration page of the router will open and click the menu INTERFACE SETUP, and then select Wireless(see image below).

4. Now go to the bottom of the page to the WiFi password section and change the WiFi password.
Changing the Pre-Shared key will change the WiFi router password.

5. After entering your password, scroll down to the bottom of the page and click the Save button.

6. That's all. You have successfully changed your ZTE password.

Forgot ZTE router password? I need to reset the ZTE router

Have you changed the username and / or password of your ZTE router and forgot why you changed it?
Do not worry: All ZTE routers come with a factory default password, which you can revert to by following the instructions below.

Resetting your router to factory defaults is a serious measure. However, sometimes when you have no other way to access your router, this step is necessary. Specifically, if you are unable to log into your router at normal mode(perhaps because you forgot your password) this may be your only resource. Before resetting your router to factory defaults, make sure the passwords are not working, including the default passwords.

Reset ZTE router to default, this will reset ZTE password to default

If you choose to return your ZTE router to factory default settings, you must perform a 30-30-30 reset as follows:

1. When your ZTE router is powered on, press and hold the reset button for 30 seconds.

2. While holding down the reset button, power off the router and hold the reset button for another 30 seconds.

3. While holding the reset button, power on the device again and hold it for another 30 seconds.

Your ZTE router should now be reset to its new factory settings. Check the table to see what it is (Most likely No / No).
Important: remember to change the default username and password to increase the security of your router after a factory reset, as default passwords are available all over the internet (for example, here).

I still cannot access my ZTE with the default password

Make sure you followed the reset instructions correctly, as the router should always return to the factory default settings (ZTE password and login) when resetting. Otherwise, there is always the risk of damage to your router and it may need to be repaired or replaced.

How to change the wireless channel on my Wi-Fi

Example. The performance of your wireless router may be affected by interference from other nearby routers. You can change the wireless channel to one that has less interference.

Step 1. Open an Internet browser (such as Internet Explorer) and enter http: //dlinkrouter.local or http://192.168.0.1 in the address bar. Press Enter.

Step 2. Enter the password for account administrator in the field. If you have not changed this default password, leave the field blank. Click "Login".

Step 3: Move the cursor to the Settings tab and then click Wireless connection»In the drop-down menu.

Step 4: Click " Additional settings» for the band for which you want to change the wireless channel. Select a channel from the drop-down menu " Wi-Fi Channel "... The process for selecting a mode is the same for the 2.4 GHz and 5 GHz bands, however the options available for each band are different.

2.4 GHz band:

5 GHz band:

Note. In most cases, you only need to change the channel on your router. Majority wireless adapters automatically detect the channel used by your wireless network.

Change LAN IP on ZTE

If you've followed our navigation guide above, you should see this screen.

We start this guide at home page ZTE router. Want to change your IP address? You have come to the right place. We'll show you how.

Question: How to set up the Internet on smartphones (phones) and ZTE tablets?

Answer: Internet setup on ZTE devices is performed in the following order.

1. We connect the service with the operator. This can usually be done via a USSD request.

To connect to the Internet from Megafon, we recommend following the link - http://www.megafon.ru/internet/, select the type of device for connection, for example - "For a smartphone", select your region, then select a tariff, click "Buy", after then the information will appear, what code must be dialed to activate the service, for example - * 236 * 0 #. We dial this code like a regular phone number.

To connect to the Internet from MTS, we recommend following the link - http://www.mts.ru/mobil_inet_and_tv/, select the type of device for connection, for example - "Internet from the phone", after which a page will open with the code that you need to dial to connect services, for example - * 252 #.

To connect the Internet from Beeline, we recommend following the link - http://beeline.ru/customers/products/mobile/, select the type of device for connection, for example - "On the phone", then select a tariff plan, then click on "Connect" -> "Connection and service management" after which you can see information on how to activate the service, for example, by dialing the code - * 115 * 04 # or by calling the number.

Attention! The page addresses and USSD request codes are for example only and may change over time! To connect, go to the home page of your website cellular operator and already since home page go to the pages with information about internet connection. For other operators, the setting will be approximately the same. You can also call your cellular operator at hotline and connect the service verbally. Another option is to come to any operator's sales office in your city, where the sellers are obliged to connect the service to you.

2. To turn on the Internet you need to go to "Settings" -> "Data transfer" and opposite the item "Mobile. traffic "or check the enable checkbox, or move the switch to the right to" On ". For most ZTE smartphones, this is enough to automatic switching on mobile internet. After the connection is established, depending on the type of connection, in the notification panel, next to the network signal strength icon, the symbol H (HSDPA), G (GPRS), E (Edge), R (Roaming) or 3G will appear. Also, to check the Internet connection, open a browser and wait for any Internet page to load, for example, by typing “ya.ru” (a light version of Yandex) in the address bar.

Attention! If ZTE smartphone 2-SIM, then the SIM-card that will be used to access the Internet must be inserted into the WCDMA / GSM slot, and in the settings "Settings" -> "More" -> " Mobile network"->" Network settings SIM1 "(or 2 depending on the model, see the slot number under the cover) ->" Network mode "->" Preferred network mode "->" GSM / WCDMA "or only" WCDMA ".

3. If the Internet on your ZTE device does not appear after following the previous recommendations, then you need to either get the Internet settings from your mobile operator in automatic mode, or enter the settings manually.

Automatic tuning

If the operator is Megafon, then go to the site - megafon.ru, click on the link "Support" -> "Settings", select "ZTE" there, and then your smartphone model, for example - "V880E" and enter your phone number. After that, the settings should come to your device.

If the operator is MTS, then go to the site mts.ru, then “ Mobile Internet& TV "->" Help and Service "->" Settings "->" Phone Settings ". There we enter the number and wait for the settings to be received.

If the operator is Beeline, then automatic setting mobile Internet can be ordered free of charge by calling 0880. (Password for saving settings - 1234.)

Manual setting

If the operator is Megafon, then go to the address http://labs.megafon.ru/dev/, there we select "Other manufacturers" -> "ZTE", we are looking for our device, for example " ZTE Nubia Z5 ″, well, we are trying to configure the way it says there.

If the operator is Beeline, then go to the site beeline.ru, there we click on the link "Help and support" -> "Internet settings" in the search field, enter the model of your device, for example - ZTE V790 and then click "Find instructions" and read the information on at the construction site. You can also send instructions directly to your phone by selecting the link "Send SMS with instructions for ZTE V790".

If the operator is MTS, then go to the site mts.ru, then "Mobile Internet and TV" -> "Help and maintenance" -> "Settings" -> "Phone settings" -> "Internet" -> "Android", read the instructions ...

General rules for manual configuration

Go to the section "Settings" -> "More" -> "Mobile network". If 2 Sim cards are used, then we select the settings of the Sim card for which the Internet is activated. Next, click on the item "APN Access Points" -> "New Access Point" and enter the settings that are indicated on the website of your cellular operator. After entering the settings, save the access point, reboot the device and rejoice.

In most cases, the following settings are sufficient.