In order to receive and send MMS messages, as well as in order to enter the Internet from the phone, you must configure the mobile phone. There are two ways to configure the GPRS connection, as well as setting up sending and receiving MMS messages in manual and automatically. This article describes how to get automatic settings MTS and setting up MMS, WAP, GPRS connections in manual mode.

Order Auto-tuning. Send, send, configure, connect gPRS Internet, MMS MTS. Automatic setup, receiving settings through the SMS number to the phone.

How to set up the Internet, setting up MMS on MTS.

1. Automatic MTS settings Obtaining via SMS.

In order to get an SMS on the phone with automatic settings, send an empty SMS message to a short number from the MTS SIM card 1234 or call the number 0876 . Your phone should come SMS with automatic settings. After receiving an SMS with automatic settings, it will be possible to save them. Save automatic settings In your phone. After saving the settings restart your mobile phone. Make sure in parameters mobile Internet Settings are selected as valid MTC GPRS..

Show more

Additional Information. When ordering automatic MTS settings, the user can choose which settings it is necessary. To do this, in the SMS message sent to the number 1234 Write text from the list below:

Internet - To receive GPRS-Internet settings.

MMS. - To get MMS settings

WAP. - To receive WAP-GPRS settings

empty message - To receive Internet-GPRS and MMS settings

CSD. - To receive WAP-CSD settings

2.2. Order a SMS with automatic GPRS settings for your phone on the site Mobile.yandex.ru. .

3. Automatic settings MTS - order via the Internet Assistant MTS.

The MTS website has the ability to set the tariff setting, turn on to turn off the options, as well as order Getting automatic settings MTS. All these actions, incl. and receiving automatic settings to the phone, you can do going into Internet assistant on the site mts.

4. Clearing phone for MMS, WAP, GPRS, Internet.

MTS manual settings to receive and send MMS, settings to access the Internet via the WAP or GPRS protocol.

4.1. Including GPRS Internet.

To configure the phone manually. It is necessary to do the following. Open in the menu "Settings" And choose an item with Internet connection parameters. Depending on the phone model, this item may be called "Connection", "Internet Settings" or "Data Transfer". Enter the parameters specified below.

MTS Internet
Data Channel / Data Bearer: GPRS.
Access point / APN: internet.mts.ru.
USER NAME / User Name: mTS.
Password / Password: mTS.

4.2. Incorrecting and receiving MMS.

Find on your phone item Setting MMS and enter the following parameters:

Profile name / Profile Name: MTS MMS.
http: // mmsc
Data Channel / Data Bearer: GPRS.
Access point / APN: mMS.mts.ru.
192.168.192.192
WAP PORT (WAP 1.X): 9201
WAP Port (WAP 2.0): 9201(8080)
USER NAME / User Name: mTS.
Password / Password: mTS.

Show more

4.3. Including WAP connections.

Important, configure the Internet access through WAP. compound not recommendedbecause Before no longtime, the cost of WAP traffic compared to the GPRS traffic cost more than more expensive. This information can be clarified by MTS by calling a short reference number. 0890 MTS. The call is free. On the Internet it is best to go through the GPRS connection for this configure the phone under paragraph 4.1.

To configure the WAP connection, you must go from the main phone menu to the Settings section and create a new access point with the following parameters:

Profile name / Profile Name: MTS WAP
Homepage / Homepage: wap.mts.ru.
Data Channel / Data Bearer: GPRS.
Access point / APN: wap.mts.ru.
IP Protocol / IP Address Address: 192.168.192.168
WAP PORT (WAP 1.X): 9201
WAP Port (WAP 2.0): 9201(8080)
USER NAME / User Name: mTS.
Password / Password: mTS.

The names of the menu items and the number of settings may depend on the model of your phone.

P.S.: After receiving the settings you need make surethat in your tariff plan is connected one of the services GPRS / Mobile office via an Internet assistantthat make it possible to enter the Internet through a cell phone.

How to order, get automatic mMS settings and the Internet on the MTS phone.

Connecting VPN Settings in Windows XP or Windows 7

1. To configure network connection home Internet MTS must follow these steps:

Press the Start menu, then the "Control Panel". In the next window, select the "Network Connections" icon if you have Windows 7 - "Network Management Center and Common Access";

In this section, you need to right-click the "Connection by local network"(This icon can have another name, for example, contain the connection number), in the next menu, select the" Disable "option. If your connection is not activated, it will not be necessary to disable it. If you work in Windows 7, perform actions as in pictures below;

Right mounted again and select the "Properties" option, in the appeared section, locate the list "Components used by this Connection" Click on "Internet Protocol (TCP / IP)", in front of this line, a check mark should be. Go to the properties of the component and check "Get the DNS server address automatically", and also "get an IP address automatically". Click Now OK button on the Internet Properties window and in the Local Connection Properties window.

To activate the connection over the local network, double-click on the icon of the same name.

To create a VPN connection, follow these steps.

In the "Network Connections" section, located on the left in the menu, select the "Creating a New Connection" option (also can be done through the "File" - "New Connection"). You will open the "Wizards of New Connections", then click "Next". In the window that opens, select the "Connect to the network in the workplace" option, and click the Next button;

To select the necessary network connection, highlight the "Connection to Virtual Private Network" string by pressing the Mouse, click the Next button. Then enter the name in the "Organization" field, click "Next" again. Put the daw "Do not connect now ...", this operation is needed to ensure the publicity of the network, it is possible that it will not be needed. Next, select the VPN server (Internet address). If you are working in Windows 7, perform actions that are listed on the images. In the "Computer or Computer Address" window, enter 172.19.0.1, then "Next".

Tab "Select the availability of connection". Operating systems in which there are several accounts, it is necessary to establish the availability of the connection individually for each user. This is done in each specific operating system, based on security policies. Click "Next". At the completion stage of the Connection Wizard, activate the "Add a shortcut to the desktop" option and click the "Finish" or "Close" button.

VPN connection settings

In the "Connection" dialog box, select the "Properties" section,


- From there, go to the "Security" section, where you select the option "Advanced (Selective Parameters)" and click the "Parameters ..." button, the "Data Encryption" window will appear, where you want to click the option "Optional (connect even without encryption)". In this window, fields should also be marked: "Allow the following protocols", "not encrypted password (PAP)", "Password check protocol (CHAP)", from all other items to remove, click "OK",

- Next, the system will ask you: "The selected protocols include SPAP, PAP and CHAP. "If one of them is used, the data encryption will not be executed. Use these parameters?", Click the "Yes" button. In the "Properties" section, go to the "Network" menu and control the "VPN type" list "automatically", and the Internet Protocol (TCP / IP) item has been allocated in the "Components used by this Connection" list.

Want to go to the World Wide Web using the operator cellular communication? Then you have to figure out, like, telephone, tablet. Recently, providers simplified this process as much as possible by providing subscribers the ability to automatically customize the Internet, and the topic almost ceased to be relevant.

However, incorrect installation of parameters happens, which makes it impossible access to the Internet. Therefore, information on how to set up the Internet MTS manually and will automatically be completely unnecessary.

Drop the fear that an attempt to independently adjust the gadget will be unsuccessful - modern devices Suppose a simplified connection scheme and to enter a lot of parameters no longer need.

To access the network parameters on MTS, you need to comply with a simple algorithm and can do it as manually and automatically. No need to enter any commands, codes and USSD requests.

How to order automatic settings?

The simplest way to set up a mobile 3G Internet from MTS is the installation of old SIM card in a new device. After that, the settings will come automatically as a service SMS, which will need to be saved.

If there is a need to configure access to the network on the old device, then you need to act differently: go to the Operator's website and in the section "Service and Help" to enter your telephone number. After a while you will receive automatic network settings that you want to save.

Important! After the settings are saved, it is recommended to restart the device for the maximum correct installation of the received parameters.

There is another way to request (order) automatic settings, it is to send an SMS message. This will require sending empty SMS. on the room 1234 or call to the room 0876 .

After that, you need to wait for the service message in which the parameters needed to access the Internet, as well as installations for MMS.

Manual setting

Manually configure the device, too, you can also simply and quickly, this is done so that the user spends the minimum time to connect to the Internet MTS in Russia. First you need to create a profile, indicating its name, type and name of the access point, as well as password and login.

About settings Read more:

• profile name - MTS (any arbitrary entry);
• APN (that is, the access point) - internet.mts.ru;
• data Transmission Channel - GPRS;
• username and password - MTS.

If the profile parameters contain additional items, then all the information specified there is better to leave unchanged. It is important not to include a proxy server, it is not necessary, and if it is not configured correctly, it can block access to the network. After installing manual settings, the phone is desirable to restart.

The Internet is an important part human everyday life. Without it, it's hard to imagine even a schoolboy. And therefore cellular operators were able to give us the opportunity to use the Internet on the phone. For this you have to choose the tariff and connect it. Internet settings ("MTS") - this is exactly what will help to quickly cope with the task, and not to lose a lot of money. Let's try to explore possible tariff plans for the Internet on mobile phoneAnd also try to connect them with you.

How to install

But before this it is worth discussing with you one very interesting and important moment, namely the installation of the Internet on the phone. As a rule, it is not so difficult to cope with the task.

Settings "MTS" (Internet on the phone), as a rule, come to SMS. All you need is to save them. True, not all customers know how to do it. Usually you have to go to the phone menu (while "messages"), and then look for a "Save" line there. It appears only when you really came the settings of the Internet "MTS" automatic.

Now, if you click on this inscription, you will automatically configure the selected tariff plan For access to the World Wide Web through the phone. But what can we offer today's operator? Let's try to figure it out.

"BIT"

The first option - you can get the settings of the Internet "MTS" with the tariff "Bit". This is the cheapest and most profitable option for those who rarely use the Internet on the phone.

The subscription fee is from 150 to 250 rubles (depending on the region). For this you will get 75 megabytes per day at high speed. After graduating from this traffic, the download will be much slower. Nevertheless, it will be enough to read the mail and viewing the web pages.

As a rule, "bit" and settings of the Internet "MTS" on "Android" are not installed. After all, this operating system implies more active use World Wide Web. Let's see what can offer mobile operator Those who prefer to live on the Internet.

"Superbit"

Such clients were prepared a new proposal. This is the "Superbit" tariff. His subscription fee is from 200 to 300 rubles, but you will receive unlimited Internet At high speed.

In truth, this option Very suitable for watching videos and movies. These are the settings of the Internet "MTS" on "Android" establish customers. For relatively small subscription fee they receive unlimited communication and the ability to use mobile access The network in the same way as they would do it for a regular computer.

"Superbits" is perfect for video calls. For example, with the help of Skype. It is only worth starting using this tariff, as you will see all its chic and shine. But let's now try to figure out how to order the settings of the Internet "MTS" (automatic) for the tariffs reviewed. It is not so difficult, as it may seem at first glance.

Personal visit

So, the first is a personal request to send you the settings of the Internet "MTS". To do this, you have to reach the nearest operator's office and inform the farely chosen tariff.

If you have a passport and mobile phone with you, you will help you to turn the connection. To do this, simply pass the phone to the employee and wait. He himself will send you the settings "MTS" (Internet on the phone), and then activates them. The main thing is that you have enough money for the subscription fee.

In the case when the money is not enough, the operator will inform you about it and will suggest to replenish the bill. Make it and you can repeat the attempt. So easy and just you connect the Internet on your phone. But there are some more pretty interesting and simple options.

Through call

Get the settings of the Internet "MTS" can be used with the most common call to the operator. Just before this, stock free time, as well as take care of the availability of cash in the account.

Next dial 0890, and then wait for the operator's response. You will have to report that you wanted to get automatic settings for the Internet. Name the desired tariff plan. You will tell you the conditions for providing, and then ask if you really want to start using this tariff. Agree to the conditions, then wait a while.

You will receive a message to a mobile phone. Usually after a conversation should go around 10-15 minutes. Open SMS, and then save all the settings of the Internet "MTS". That all problems are solved. Now you can easily and just be able to visit the World Wide Web with mobile device. And no problems. Nevertheless, there is another rather interesting option. It will help you get the settings of the Internet "MTS" depending on the tariff you have chosen and without assistance.

Special combinations

For example, you can use the so-called USSD requests. It is they will help you, depending on the selected tariff plan on the Internet, connect yourself.

In cases where you want to get the "bit" settings, type * 252 # on the phone, and then click the Subscriber's Call button. Sending request will begin. When it is completed, it will just be easy to save the message sent in response. It will contain the settings of the Internet "MTS".

If you wanted to use the "Superbit", then dial * 628 #. Now, as the last time, click on the Call button. Wait until the request processes and you will receive an SMS alert. Now it can be saved. How it is done is described slightly higher.

Conclusion

So it's time to summarize our conversation. The point is that the settings "MTS" (Internet on the phone) can be obtained in several ways. All of them are pretty simple and easy to handle.

If you can not decide, then visit the nearest cellular office of the MTS operator. There you will quickly help to cope with the question. In addition, all settings will save you, and you will leave with the Internet already configured on your mobile phone.

There are several options for setting up the Internet MTS, manufactured in automatic or manual mode. A detailed description of these procedures will help to easily adjust the output in the network even inexperienced.

Competent 3G Internet Configuration Allows you to get correct access to the network from any device, be it phone, modem or router. Usually, all installations occur automatically at the time of logging on the network. If this did not happen, you can use one of several options and configure everything yourself.

Automatic Internet Configuration MTS

Installing a new SIM card is most easy way Install all parameters on the device in automatic mode Without your participation. But unfortunately, this procedure is not always successful. In particular, it concerns outdated models. In this case, for accessing the network, you can use two ways to automatically configure the mobile Internet: using the official site or sending SMS from the phone.

Automatic installation of mobile Internet on MTS website

To open access to the network on the phone, you need to go to the official website of the company in the "Internet and TV" section and click the tab "Help and maintenance". After that, the page opens www.mts.ru/mobil_inet_and_tv/help/settings/settings_phoneon which there will be information about installing the network.

Here is the window, with detailed description Action to obtain basic parameters. To do this, take a few steps:

1. Enter the phone number in a special window. On it will be sent automatic parameters for installation.
2. Before sending, you need to check the "Antiskot" check, which is presented as a group of images.

After confirming the query, the system must send parameters to the phone within a few minutes. They must be saved, after which to restart the phone. Only after that they will take effect.

Automatic Mobile Internet Installation using SMS notifications

This way, you can access the network only using the phone only to one action. To do this, you must send an empty message to number 1234. In response, the service will be sent to SMS with data to access the network. In addition, messages contain additional information on installing MMS.

Manual setting

In the case when the automatic configuration of the 3G internet does not pass, you can try to do it in manual mode. To do this, you must enter the device menu manually. standard parameters:

• in the column "Profile name" are introduced - MTS Internet. In principle, here you can write down any word you like;
• as an APN or access point indicate - internet.mts.ru;
• transmission channel - GPRS;
• user (name) - MTS;
• current password - MTS.

The listed data are the same for all operating systems. Only the paths of their input differ.

Important: Depending on the device model, the menu interface may differ slightly. Therefore, the ways described below are only approximate.

IOS operating system

As a rule, devices with this operating system Already initially have a correct way to the network. Therefore, manual configuration of MTS mobile Internet may be needed if the data suddenly "flew". In this case, several actions are required:

• you must open the section "Settings";
• to stay on the "Main" tab;
• reveal "Cell data" And further "Cell data transmission network";
• next, enter the main parameters.

After entering data, we must maintain them.

Android operating system

In order to enter manual settings On Android, you must follow the following instructions:

• enter the main menu;
• next, open the tab « Wireless connection» where we install the checkbox in paragraph "Mobile Internet";
• after that, we enter « Mobile networks» and enter the standard Internet installation options for the phone.

If in paragraph "Mobile networks" There is no indicated profile, then you need to create it manually by pressing the window "Create a new connection point". Here we enter those, the parameters that are indicated above: Name, APN, Password, Login. Subsequent data is left for the same. On some models in the window "Authentication type" Instead of installation "Not installed" It should be put "no".

Windows Phone system

The 3G-Internet manual settings on Windows is carried out in several steps:

1. in the list of the main menu we find the appropriate tab;
2. open the window here "Data transfer";
3. select item "Add an Internet access point"where in the APN tab, specify standard parameters.

Important: for getting detailed instructions By installing the Internet, the company's user can call the service number 0890. When contacting a city phone or from the number of another operator, it is worth using the phone 8 800 250 0890.