For a convenient, comfortable and full-fledged use of a smartphone, Internet settings are required. To have access to the network from a smartphone, as well as to be able to fully use the services mms messages, you need to configure the device. There are a couple of methods for connecting such settings:

1. Manual installation;
2. IN automatic mode;

Below will be the methods that allow you to receive automatic settings on a smartphone with an mts operator, as well as manual parameters for setting Internet connection settings.

To order the necessary automatic settings, send a message from your SIM card to telephone number 1234. At the same time, nothing needs to be written in the body of the letter. Also, mts provides users not to send a message, while simply calling the short number 0876. Both after one method, and after another, a message will be sent to the phone, which will contain the settings for the phone. Then they should be saved. The phone, as a rule, itself offers to install and save them. When all data is saved, you should restart your mobile. If the phone has two SIM cards, then you need to make sure in the settings that MTS GPRS is selected. After that, Internet access will be open.

If some installations have already been made on the phone, then you can order from mts only what you need. To do this, when ordering, you need to choose what exactly interests you by sending a message to short number 1234, but in the body of the letter you need to write what you need:

1. Internet - will allow you to get access to the network;
2. MMS - settings will be sent only for receiving and sending mms messages;
3. WAP - WAP-GPRS settings;
4. A blank message allows you to save and set all the necessary settings.

In addition to ordering installations via the phone, mts also has the opportunity to make automatic settings using their official website or simply follow the link mts.ru/help/settings/settings_phone.

The site will provide information that all new phones should already have settings, but if there are none, then you need to enter your phone number in the appropriate column. After that, you need to pass a small test, so the site discards the possibility of hacking. Next, a message with settings for the Internet should be delivered to the device. If they do not come, then it is already necessary to use the manual mode.

You can also use other services to send the necessary settings to your phone. For instance, this procedure allows you to make a service. For example, this procedure can be done by the mobile.yandex.ru service. All that will be necessary is to indicate the mts operator, then write the phone number in the required column and indicate which phone (model) will be used. In a couple of minutes, the settings for using the network should come. The SMS message will be password protected, and the message key will be written on the site.

Another request method for automatic installations via the Internet assistant from mts. In addition, with its help, it is possible to change tariffs and other subscriptions. In the assistant, you will need to choose which way to send the settings, and then follow the established instructions.

Manual setting mode

If there is no way to get the installation, for some reason, then it makes sense to install everything manually. In order to perform a similar procedure, you need to go into the device and open the "Settings". Then a list of items will appear, from which we select an Internet connection. Depending on the device model, such an item may have different names, the main thing is that it is responsible for connecting to the network. After this item is open, you need to register the following data yourself:

1. Name: MTS Internet;
2. Data channel: GPRS;
3. Access point: inetrnet.mts.ru;
4. Name: mts;
5. Password: mts

To access the network, it is not recommended to establish a WAP connection today, since the tariffication is significantly higher than that of GPRS. This information can be checked at the mts communications store or with the operator

After the Internet is installed, you need to check if everything is working, as well as make sure that there is traffic on the phone and a special subscription is installed that allows you to use the network.

The setup process may differ depending on the specifics of the services provided. Typically, there are two types of tuning: automatic and manual. Let's consider in more detail the instructions for connecting the Internet for the most popular mobile operators.

Automatic settings

The easiest way to access the internet at Android through a mobile operator - order an automatic configuration service. It is free of charge and does not depend on the operator and the connected tariff. All the user needs to do is send a request and receive the settings in response. Automatic order special settings will determine the model of the device used and send all the settings in the form of an SMS message.

If after receiving automatic configuration smartphone cannot access the internet, make sure:

1. You have connected the required tariff;
2. There is money on the mobile account;
3. The settings sent have been installed;
4. The phone is restarted.

Some Android device models may not support auto-tune for operators MTS, Life, Beeline and others, so you need to create and connect an access point yourself.

Notice! Most users get automatic settings after the first SIM card connection. Check your incoming SMS messages to make sure that the parameters are ready for installation.

To order add-ons from the operator, you need to go to the official website of the company and fill in the required fields, then send a message to smartphone or you can use short numbers:

• MTS - http://www.mts.ua/ru/online-services/settings#settings-auto. To order MTS 3G, also use this site, but remember that you first need to connect a suitable tariff plan, so that in the future with mobile account all the money for using high-speed Internet was not charged;

• Life - dial and execute the command * 123 * 6 # or send a standard message with the text INTERNET to 123;
• Beeline dial the command * 110 * 181 # and wait for the settings;
• Megafon - send SMS with one to the short number 5049;

Manual configuration of the MTS operator connection

MTS is a large mobile operator that provides its services in Russia, Belarus and Ukraine. If your Android device for some reason cannot load the automatic operator settings, you need to manually configure the network settings.

To do this, follow the instructions below:

• Go to the main menu on android;
• Open the settings window and select the "Wireless network" tab in it;

• Connect the mobile internet function. To do this, put a check mark on the selected area (Figure 2). Please note that if you do not activate this option, further settings will not allow you to connect to the network;

• Now select the mobile networks window. Find the profile "MTS Internet" in the proposed list. If there is no such list item, you must create it yourself. To do this, click on the item "create an APN access point";
• In order to create an access point manually, you must enter the following parameters. Name (Name) - MTS, Login and password - mts, APN access point address - internet.mts.ru. The remaining parameters must be left as default, as shown in the figure below;

Some smartphone models may contain “unspecified” by default in the authentication type area. To connect to the network was stable, you must set the value "No".

To manually configure the Internet to Beeline and Megafon, you need to create a similar access point, its address can be found by contacting the operator.

Manual configuration of the Life operator connection

Life is one of the largest mobile operators in Ukraine.

To configure and connect Android Smartphone to the Internet manually, follow the instructions:

• Go to the main menu of your smartphone;

• Then enable the settings window and select the Connections item. Depending on the version of the operating system, this menu item may be called "Mobile communications", " Mobile network"Or" Connections ". Go to this window and select the "Other networks" option, as shown in the figure below;

• Next, click on Mobile networks;

• Check the box to enable mobile data and then open the access point window;

• Press the key to create a new access point;
• Then scroll down the window and find two items: to configure the type of access point and the type of its authentication;

• Set the PAP value in the authentication window;

• In the window for changing the type of access point, write the default value in the text and click on the confirm button;
• The hotspot menu will now display the one you just created. Choose her;
• Reboot your phone. After re-enabling it, check if the data transfer mode is enabled in the network settings. Now you can start using the Internet.

3G connection

If you want to use the Internet connection of 3G technology, you need to configure it on your smartphone. However, first you need to choose the MTS 3G tariff or from other companies, which is focused on high traffic consumption. Otherwise, the charges for using the Internet can be several times higher than the costs of regular 2G.

The first thing you need to do to connect 3G MTS or Life 3G is to get automatic settings or create an access point yourself.

• Click on the network mode selection panel;
• Check the box GSM / WCDMA $
• Close settings and restart your phone. Now a high-speed connection will appear on your smartphone connected to 3G MTS or 3G Life.

Some versions of Android have a different menu, in order to connect 3G MTS, it is necessary to disable the item "use only 2G" networks in the settings, as shown in the figure below:

Internet access

You need a browser to access the Internet. Before turning it on, make sure that the data transfer mode from the SIM card you need is enabled in the settings. Go to the menu of your device and find a standard browser there. You can also download a third-party browser from the official app store.

After installing the desired browser, enable it and go to any of the sites. If the connection to the Internet did not happen, you need to create an access point again or call the operator back. Perhaps your smartphone or tablet model has a special system for setting up the mobile Internet.

Thematic video:

It is impossible to access the Internet if the configuration parameters do not meet the standards of the MTS operator.

Even earlier, adjusting the parameters of the Network turned into a real test, because you had to literally study the instructions that were difficult to apply in practice.

Today everything has become easier, and network operators are trying to automate the settings as much as possible. All you need to do is name and specify the APN (access point)

Despite this availability, the automatic settings mode does not always work, so you have to turn to the manual mode. After considering the methods of manual Internet connection MTS(settings) we will figure out how to order auto settings and save them correctly.

Setting up an MTS access point on a smartphone

Your first mission is to find the location where the APN setting takes place on the phone. Typically, this is a menu for Internet access settings (or network configuration).

It is enough to create an MTS Internet profile (as it should be called) and conceive an access point with the following content: internet.mts.ru. We put mts in the password and login lines. As you can see, everything is not as scary as it seemed at first glance. Regarding iPhone smartphones, then all the settings are contained in the item "Cellular data".

After entering the settings, you need to reboot your device. Note that in smartphones based on Android customization access point is carried out according to the following chain of items: " Wireless networks, then - More -, then Mobile network. "

In the presented case, we are limited only to the access point and entering a password with a login. All other points that catch your eye should be left unchanged. We must not forget about smartphones based on Windows Phone, which are equally popular.

In this case, the following scheme of actions is suitable for us: “ Settings - item "Data transfer" - Add a new access point to the Network "... Again, we continue to enter APN - internet.mts including standard password with login.

Manual Internet settings MTS

Manual settings, in spite of their simplicity, force you to enter or prescribe something, which is not always nerve-racking. To avoid this, the automatic settings will help you. Feel free to go to the site, look for the phone settings item and follow the prompts.

As soon as an SMS arrives on the phone, it should be saved and your smart rebooted. there is sending SMS for order automatic settings: blank SMS (no text) to 1234.

We set up an access point on a tablet from MTS. If you think that now a whole book will be written on setting up the Network configuration on the tablet, then this obviously will not happen.

Regardless of the OS (Android, iOS and others), all settings are made in the same way as on smartphones. Therefore, follow the instructions above to configure.

We configure the MTS access point on the modem

As a rule, modems manufactured by MTS already have all the necessary configurations (installed by the manufacturer), so to connect, you just need to connect the purchased equipment via USB and wait for the software to download and install.

But what to do when in your arms modem of universal type (not MTS)? In this case, do not wait for automatic settings, and you will have to enter all the items yourself.

To register an access point manually, you need to go to the modem settings and find the section where profiles are created. Then everything happens according to standard scheme(name, access point, logins and passwords remain unchanged).

The dial-up number also remains the same: *99# ... Once you have entered all the values ​​and they are correct, save the profile, reboot the device and use the Internet.

Modern technologies make it possible to reduce the setting of the Internet in most smartphones, mobile phones and tablet PCs to just specifying an access point. Then you should reboot the device on which Internet access is configured and connect to the network. There are exceptions, and automatic settings are not installed for some reason. In such cases, adjust manually. The essence of setting up MTS access is very simple, and the procedure is simplified to the maximum.

It is possible to order the receipt of automatic settings from the MTS operator using an SMS message on the website. You just have to save and apply them.

Setting up an MTS access point on the phone

Find the menu item in your phone where the APN is installed. Most likely, you should look in the settings menu that relate to Internet access. You need to create a profile by specifying the following:

• profile name - MTS Internet;
• access point - internet.mts.ru;
• standard login / password - mts.

If you compare the number of settings points of a new phone model and some old Motorola model, you will be surprised how much less Internet profile settings are in modern phones.

The platform on which the smartphone works is the main criterion for how the access points will be configured.

Smartphones with Windows Phone are configured in the menu, which must be entered in the following way: "Settings - Data transfer" and finally "Add an Internet access point". Here, specify the APN - internet.mts.ru, as well as the login / password - (mts). The rest of the items remain unchanged.

If you have a platform Android, then you need to take the following "steps": "Wireless networks - More", and then the item "Mobile network". The entered data are similar to those described above: set the access point, login, password. After that, we restart the smartphone.

If you are the owner iPhone, then go to the "Cellular Data - APN Settings" menu, write down the standard internet.mts.ru address. To properly activate the network connection, use the appropriate switch and send the iPhone to reboot.

The easiest way is to avoid manual settings and try automatic settings. Find the section "Phone Settings" on the MTS website To do this, go to the "Help and Service" item, and then "Settings". After specifying the captcha and the phone number on which access is configured, we expect to receive a message with the settings. We save the received data, restart the phone. You can also order automatic settings by sending an empty notification to 1234.

Please note that the menu structure may differ depending on the version of the operating system.

Setting up an MTS access point on tablets

Tablets are the same smartphones, only large sizes... Tablet PCs work on the following operating systems: Google android, Windows, iOS. To set up a hotspot on your tablet, carefully read about setting up hotspots on smartphones and phones. APN settings are performed in a similar manner.

Setting up an MTS access point on a modem

To connect the MTS modem to the network, you need to connect the modem to the USB port, then wait for the software / drivers to be installed and activate the connection. The simplicity of the procedure is explained by the fact that the modems from MTS contain all the necessary settings.

In a universal modem, there are often no settings. To specify the settings manually, go to the software settings and find the section with the creation of a new profile. There, specify the profile name, access point, login, password and another dial-up number * 99 #. After saving the profile, select it as default and log out.

If you are lucky and your modem has configured profiles, then select the MTS profile, check its performance. Unnecessary profiles can be simply deleted as unnecessary.

To be able to access the network through the operator cellular communication, need to know, how to setup Mobile Internet MTS on your device. Recently, this topic has become less and less relevant, because providers mobile communications tried to simplify this process as much as possible by providing automatic parameters Internet access.

But there are situations when they are installed incorrectly, which makes it impossible to access the network. Information on the topic “ How to set up MTS mobile Internet on Android manually". There is no need to be afraid that you will not be able to do this. On the modern devices the settings are simplified, there is no need to prescribe many parameters.

Auto mode

If you don't know how to set up the internet to mobile phone MTS, try the simpler route. When in new phone a SIM card is inserted, within a few minutes the automatic parameters of the access point come to the number. They are provided as a service message and should be saved. There are situations when you need to set up the Internet on a used device. For these purposes, you can go to the official website of the company Mobile TeleSystems, go to the "Help" section. Enter your phone number in the special form. Within a few minutes, a service message will come to it, you save it, reboot the device, the set parameters should take effect.

To those who do not know how to set up mobile Internet MTS on Samsung in automatic mode, you can send an empty text message to 1234. Another way to achieve your goal is to call 0876. If you do everything correctly, you will receive a service message on your phone with Internet settings and multimedia messages.

Manual mode

If needed set up MTS mobile Internet on Lenovo manually, it will take a little time. Go to the phone settings, create a new point, fill in following lines:

• name - MTS Internet (it is allowed to use another, there is no fundamental difference);
• access point - internet.mts.ru (note, there is no http: // prefix);
• GPRS data transmission;
• login / password - one is used - mts.

If there are additional items in the form, you do not need to fill them out, all the prescribed parameters are left unchanged.

Pay attention to the proxy server, it must be turned off. On Android devices there is still a column "Authentication Type", the option "No" is set there.

Do not know, how to set up MTS mobile Internet on the IPhone? The introduction of parameters is not much different from setting up devices operating on the Android platform. Go to the Cellular data menu section, to provide access to Internet networks with high speed, enable 3G, register APN, name, access code. If you have to work with an MTS router, you will need a little experience with network devices of this type.