D link dir 300 firmware 1.0 4. I like ttk-chita

Connect your computer and router by plugging the cable into network card computer and LANport router.

1. Checking the settings network connection on the computer.

Windows XP (Control Panel-Network and Internet-Network Connections-Connect by local network.)

Windows 7/8 (Control Panel - Network and Internet - Network and general access- Changing adapter parameters - Local Area Connection)

Right-click on a local area connection - select " properties". Double click on " Internet Protocol version 4". Set the switches to automatic receiptIP addresses.

2. Launch any internet browser ( Internet Explorer, Opera, Google chrome and others). In the address bar of the browser, write the IP address of the router - 192.168.0.1 and press the key Enter(for the initial configuration of the router, Internet access is not needed).

3. Login to the router.

3.1. If the router is being configured for the first time, then the first time you log in, it will ask you to set a password to enter. Standard login / password pair: admin / admin

3.2. If the router has already been configured before, then enter the username and password to enter. Default loginadmin, passwordadmin.

4. Remove existing connections.

Go to " Net»-« WAN". Put a check mark in front of the created connections and click on the button " Delete»

5. After deleting, click on the " Add". In the drop-down menu, select the connection type " PPPoE».

6. In the window that opens, in the section Ethernet, you must specify the MAC of your computer, otherwise you will have to contact technical support to unbind the MAC address.

Fill in the fields Username and password... The data is provided in the contract. MTU should be equal 1492 ... Push the button Apply.

7. Connect the internet cable to WANport router. The connection will change to the "Connected" status.

8. For the correct operation of the IP-TV service, both via cable and Wi-Fi, you need to add one more connection - Static IP... Press the button again Add.

Connection type - Static IP

9. In the window that opens, fill in the windows and click the " Apply ".

IP-the address: 192.168.1.10

Netmask: 255.255.255.0

IP- gateway address: 192.168.1.9

PrimaryDNS- server: 188.168.69.69

SecondaryDNS- server: 188.168.81.2

Check the box “ Turn onIGMP»

After application, two connections should be in the status " Connected". Default gateway PPPoE

10. For customization Wi- Fi... Go to the section " Wi- Fi»-« basic settings". In the window SSID you can customize the name of your point. Click " Apply».

To set a password to access Wi-Fi point go to the section " Wi- Fi»-« Security Settings". On the menu " network authentication»Select« WPA- PSK/ WPA2- PSK mixed". Enter the password in the window “ encryption keyPSK". Click the button Apply.

11. Save changes to complete the settings. At the top of the screen, click on the inscription “ Save».

12. In order to find your network, you need to click on the icon Net located next to the clock, in the lower right corner, and select your Wi-Fi network... Click on it with the left mouse button, then Connection, and enter the password for the network.

This article will focus only on the dir300 router revision B1. Turn the router over and look at the bottom surface, where the sticker will indicate its hardware revision (look for the line H / W Ver: B1). This model differs from the older one as appearance, and the firmware version (starting from 2.00), carefully look at the photo above. The main difference between revisions A1 and B1 is the chip on which the router is based, in our case the router H / W Revision B1 and is based on the Ralink RT3050 chip. By the way, the hardware version of the dir-300NRU WiFi router is exactly the same as that of the dir-600, which is a complete analogue of 300NRU and is produced for the European zone.

WiFi router firmware D-Link DIR-300NRU Rev. B1

Installation of DD-WRT firmware on D-Link DIR-300 Revision B1 is performed via standard web interface router. Further point by point:

1. Download the firmware from this site or check more new version on http://dd-wrt.com/site/support/router-database having driven into the search DIR-300 B1. We need the file dlink-revb- factory-webflash.bin

2. We connect dir-300 'direct' network cable included in the kit (any of the 4 LAN ports of the router) with a computer.
In the properties of the local area network connection on the computer, assign the IP address 192.168.0.15 and the subnet mask 255.255.0.0

3. Launch the browser (it is best to use IE) and go to the web interface by typing http://192.168.0.1 in the address bar
We enter the username and password, for a new router the default username is admin, there is no password (empty) and the confirmation code from the figure. If you did, please enter your passwords.
Go to the Maintenance tab and then Firmware Update, click "browse" -> look for the downloaded file dlink-revb-factory-webflash.bin, click "Upload"

4. For several minutes while the DIR300 is being stitched, you cannot turn off the power and interrupt the process in every possible way. For reliability and preservation of a certain amount of nerves, I advise you to do this operation by connecting the router and computer via UPS (uninterruptible power supply).

5. After the firmware is complete, the router will reboot and become available at 192.168.1.1. Let's enter it into the address bar of the browser and see the DD-WRT web interface. If the page does not load, try clearing the browser cache, close and reopen. The login and password for DD-WRT firmware is root / admin.

DD-WRT version update

For a subsequent firmware update from DD-WRT, use the dir300-revb- ddwrt-webflash.bin. Download it here - or on http://dd-wrt.com/site/support/router-database having driven in the search DIR-300 B1.

1. Open the DD-WRT web interface in a browser, by default it is located at 192.168.1.1
2. Select the Administration tab -> click "Firmware Upgrade"
3. Next "browse" -> select the downloaded file "dir300-revb-ddwrt-webflash.bin" -> "Upgrade"

After a few minutes, the router will reboot and update web page... I recommend that you turn off the router after the firmware and turn it on again (some kind of power reset).

Return to official firmware D-Link

Returning the official firmware is also not difficult and the execution algorithm is exactly the same as in the paragraph - "Updating the DD-WRT version". Naturally, we need to have a pre-prepared firmware file, download -. Can also be downloaded from the official FTP server D-link ftp://ftp.dlink.ru/pub/Router/DIR-300_NRU/Firmware/ by selecting latest version.

Rollback to factory firmware using Emergency Room

Sometimes there are situations when it is impossible to return to the factory firmware using the method described above. In this case, we use the Emergency Room.

1. We reset to factory reset, either via the DD-WRT web interface, or by pressing the reset button.
2. We remove all ethernet cables, leaving only the LAN1 connection of the router -> PC. We always use the "straight" wire (blue from the kit).
3. In properties to network adapter computer, we register the static address 192.168.0.15, the subnet mask 255.255.0.0
4. Remove the power supply plug from the router, press the reset button, and without releasing the button, plug the power back in, wait for the router to load for about 15 seconds and only then release the button.
5. Now quickly open the browser, enter http://192.168.0.1 and in front of us is the Emergency room. Select the firmware file dir300b_v2.05_abnj.bin and click "Upload Now".

Well, now, briefly, what is this venture with a DIR 300NRU flashing for?

The firmware is based on Linux and is a miniature operating system, a lot of advanced settings appear, which are much more logically located. Ability to cut the channel with priority by service (QoS). You can block sites by page address or simply by domain name.

We have already reviewed the configuration and installation of the D-Link DIR router, today we will talk about flashing.

Model definition

First of all, you need to determine the model of your router, in order to then select the D-Link firmware we need. The model is painted on the bottom of the device.

Download from the official site

Only after you have precisely determined the model of the router, proceed to downloading the firmware to the D-Link DIR-300 router. The company has a website with all its D-Link firmwares, which greatly simplifies our task. Go to the address - http://ftp.dlink.ru/pub/Router/ This page contains programs for all routers of the company we are interested in. In this list, we need to find our device.

At this point, follow the link with the name D-Link "DIR-300_NRU". It contains programs for many models at once. Then you need to select the Firmware folder. And here we choose the model that you have. We have, for example DIR router 300 NRU B7. For you, this could be, for example, NRU B5. In the folder where we went, there is a file with the extension ".bin". We download this file.

Software Update

We go to the device settings. If anyone does not know, then in the browser you just need to go to the site 192.168.0.1 or 192.168.1.1. If the page interface is designed in dark gray tones, then click on the "Advanced settings" link, it is located in the lower left corner, as shown in the screenshot.

In the column "System" there is an arrow in right side, there is a "Software Update".

In the window that has opened, select "review" to select the file of interest to us. We select the file that was downloaded before, the one with the extension ".bin". We press the "update" button. This completes the update. Consider updating on other interfaces.

If the interface is old, White background, blue panels, then we act a little differently. We go into the same router settings. We enter our username and password. V top panel there is an item "System". A list appears where we select "Software Update". We select our file and update the software.

D-Link router firmware interface 1.2. has nautical tones, blue-green menu color on the left. We select "System", "Software update". After these steps, as usual, select the file and update.

There are more old D-LINK DIR-300 firmware, version 1. Dark gray menu in English. We select "MAINTENANCE" in the upper menu, then our choice falls on "Firmware Update", which is in the left list. Select the file, click update.