In this lesson, I will tell you how with the help of the tool Clone Stamp Tool(Stamp) Delete a person from a photo and restore the background.

Materials for the lesson:

Step 1

Open the photo old coupe and above, above the background, create a new layer.

Step 2.

Activate Clone Stamp Tool (Stamp) (s).

To successfully use StampFirst you need to determine the source (point that will be cloned). To do this, just hold the key Alt. And clicking in a suitable image, then start drawing. You will draw those pixels that cloned. Now, when we figured out how tool works, cancel last action (Ctrl + Z) and deactivate Chekbox Aligned.(Alignment) on top panel parameters.

Now take turns take the samples of sources around a woman and stamped it. Unfortunately, there are no universal recipes, how to better use a stamp in a certain case. Try to fully paint the woman. So far, do not worry about the repeating pattern, we will fix it later.

In the screenshot of red circles, sources for samples are marked (Alt + Click).

You should get something similar.

And do not forget that each cloning stage must be done on a new layer. After the first stage, we have a background and one new layer.

Notice, despite all my efforts, the photo remains a terrible repeating pattern (this is a side effect of using a stamp). In the next step, we will fix it with you.

Step 3.

Create a new layer (Ctrl + Shift + Alt + N) and the stamp is trying to gently get rid of repeated patterns.

Please note that at the leg level, the man's grass is sharper than (at the knee level). We will try to achieve the same result on the left side of the photo. We take the sample of cutting herbs and gently paint, trying to avoid repeating patterns.

Flowers on the background look unrealistic, so we continue to clone them to the very edge of the document. Do not forget: a new layer (Ctrl + SHIFT + ALT + N) and stamp.

Step 4.

The result still looks unfulstly. Create the selection of grass in the right-hand side, click Ctrl + Shift + C to copy it, then create a new layer (Ctrl + Shift + Alt + N) and insert the copied area (Ctrl + Shift + V). Move the copied grass into the left side of the image.

On the same layer add a mask Layer - Layer Mask - Reveal All (Layer - a layer-mask - show all) and a soft round brush of black colors (c) We remove the rigid edges on the copied grass. Thanks to this, we gently unite a new piece of grass with a background. Repeat this process several times to overlap other unsuccessful areas of the photo.

How to cut people and objects with photos

Modern technologies allow you to take instant photos in almost any conditions and make it possible to immediately see the result. However, when viewing the resulting images, it may be that some fragment of the picture (for example, a person who suddenly falling into the frame) is required to cut so that it does not interfere with the overall composition. Often there are extra objects in the photo, and sometimes it is necessary to remove with a photo of a person or his shadow. How to remove with the photo all unnecessary? We have prepared instructions for you, as well as answers to some frequently asked questions. Click on the appropriate link to go to the desired section.

How to remove unnecessary objects from a photo

The Movavi photo editor is perfect for removing objects with photos. He is very easy to learn, so you do not have to mess around with the settings before you start work. Download the program and see for yourself!

This instruction is suitable for both versions of the program: Windows and Mac. All you need is to choose a suitable version for you and follow the tips below.

Install the Movavi photo editor

Open the installation file and follow the installer's instructions.

Add a photo

Running the program, click Open file and select the desired image. You can also add a file to the program by simply dragging the photo from the folder to the photo editor window.

Highlight and delete an object or person.

To cut the object from the photo, open the tab. Removal of objects and highlight the object using the tool Brush. For more convenient allocation you can also use Magic stick or Lasso. To correct the selected area, use the tool Eraser. Now delete the unwanted object by clicking the button. Erase.

To remove the remaining fragments, use the tool Stampwhich allows you to copy any sections of the image to the selected area.

Save the corrected photo

With a photo editor Movavi, you can delete unnecessary elements from photos on the magic. To remove the subject with the photo, you will need only a couple of minutes!

Frequently asked Questions

How to remove the background in the photo in Paint?

Open the image from which you need to remove the background, in the Paint graphics editor. Find the button on the toolbar Highlight and click on the arrow below it. Click on it Transparent selection, then - by HighlightTo select a method of selection: a rectangle or an arbitrary area. Circuit with the mouse part of the image you want to leave, then click Copy. Create a new file and click Insert. Ready! You can save your picture without background.

If you want not to just remove the background, and, for example, make it lighter or erase not all objects - try the photo editor from Movavi. Its functional is much wider than Paint, and use it easier for them.

Each of us came across the situation when completely unwanted objects are found on the photo taken photographs, the view of the entire picture. Someone in the process of shooting simply does not notice extraneous objects, someone ignores, and in some cases it is simply impossible to take a picture so that in the photo does not fit outsiders. In addition, in case you use a mirror photo, which fell on the lens of the dust or the Sorink can significantly spoil the view of the snapshot. Similar problems are easily solved by the Adobe Photoshop program. It's not scary if you did not use them before, this article is understandable and accessible to tell you how to remove an excess object in Photoshop. Let's deal with. Go!

We consider various ways

Running the program, open the photo you want to fix. To do this, go to the "File" menu and click Open. First, consider the case when a stain or other small object appeared in the photo. Apply the Magnifier tool to zoom in the problem area. Then select Lasso on the toolbar. Please note that it is necessary to dispose of standard Lasso, and not the other variations. Circuit with a lasso small plot around the spot. If the background is homogeneous, then it is advisable to capture it more, if not, then circle as close to the problem area. Having highlight the object, click on the "Delete" keyboard. In the dialog box that appears, select the color to which the circled site will be painted. In the "Content" section, set "taking into account the contents" to photoshop as quickly as possible continued image background. Click OK. After that, go to the "Select" section and select "Cancel Selection". Ready.

It happens that the beauty of the landscape spoil outsiders

We operate Photoshop tools to highlight

Dialog box filling the selected area

The desired effect is achieved quite quickly.

Spot or Sorink is one thing, but the whole object is completely different. But it can also be corrected. The first steps will be the same as in the previous case. Open a photo, increase the desired part of the image and select the object with Lasso. Then also click "Delete" and set "taking into account the contents". To remove the selection, use the CTRL + D key combination. If some parts of the object remained, it is possible to remove them with a brush. Increase a picture up to 400% so that the pixels are visible, then select the Pipette tool. Click on the area with a suitable color. Next, select the brush and gently fasten the extra sections. Please note that this method works exclusively in small objects.

To remove larger objects, you can utilize the "stamp". Selecting the tool, set 100% in the "opacity" and "push". Choose Form C. blurred edgesSo that the changes will be as invisible as possible. Increase the desired image area. Click Alt on the keyboard to copy the background area, and start painting the object. If the background is heterogeneous, press Alt and copy the necessary parts of the background. Pick the desired diameter of the stamp, it should be not very big. With enough accurate execution, the changes will be completely invisible.

For example, we need to remove the PB icon

The result of the operation of the tool

Let us turn to a more complex occasion. Consider how to remove a person from a photo in Photoshop. To do this, you can use the "stamp" tool already familiar to you or apply the fill. First, select a person or part of it (depends on the background) and click "Fill out (Fill)", in the window that appears, select "Taking into account the contents". After that, Photoshop will fill in the area that you marked with pixels, close in color to the neighboring. If the background is not completely homogeneous, then some areas can be corrected using a stamp or brush. With similar combination of tools, you can achieve an excellent result even on a complex background. The main thing is to work in pixel mode and dispose of a small brush diameter. This is a thin work, but the result is worth it.

Filling taking into account content

Now you will deal with how to remove the inscription from the picture in Photoshop. Many users often seek an answer to this question. The specified problem can be solved using two tools: "pipette" and "brush". By increasing the part of the picture with an unnecessary inscription, select the color of the background with a pipette, and then fill the letters with a brush. To change the most imperceptible, work in pixel mode, picking up the diameter of the brush, transparency and color background. The easiest option lies in the elementary image trimming. Select the "Crop" tool and highlight the picture so that the unnecessary inscription remains clearly behind the selection line.

Alternating "Brush" and "Pipette" by pressing the Alt key, paint the inscription

So you can get rid of unnecessary items in the photo. Now you can independently make any photo ideal. Write in the comments if this article helped you and share your opinion with other users as to which method you consider the most efficient and convenient.

Often in the pictures made spontaneously, there are unnecessary objects, defects and other areas, which, in our opinion, should not be. At such moments the question arises: how to remove more superfluous with the photo and make it high quality and fast? In this lesson, we will deal with how quickly and efficiently clean the snapshot from the interfering details.

Removing parts with photos in Photoshop

Today we will use two tools. it "Fill with content" and "Stamp". Auxiliary tool for selection will perform "Pen".

1. Open a snapshot in Photoshop and create it a copy of the key combination Ctrl + J..

   

   A small icon on the chest character will perform as an excess element.

2. For convenience, we increase the scope of the image by a combination of keys Ctrl + Plus.
3. Choose tool "Pen" And we supply the icon along with the shadows.

   

   

4. Next, click the right mouse button inside the contour and select item "Education dedicated area". Rastune exhibit 0 pixels.

   

5. After the selection is created, click SHIFT + F5. and choose in the drop-down list "Taking into account the contents".

   

   Press OK, remove the selection with the keys Ctrl + D. And we look at the result.

   

6. As you can see, we lost part of the butter, as well as a little blurred texture inside the selection. It's time "Stamp".

   

   The tool works as follows: when the key is pressed Alt. A sample of texture is taken, and then this sample click placed in the right place. Let's try. To begin with, restore the texture. For normal operation tool, the scale will be better reduced to 100%.

   

7. Now restore the pettits. Here we will have to snatch a little, because we do not have the desired fragment for the sample. Create a new layer, we increase the scale and, while on the created layer, we take a sample with a stamp so that a plot with the final stitches of the butchers get into it. Then click anywhere. The sample is imprinted on a new layer.

   

8. Next click the keyboard key Ctrl + T., Rotating and move the sample to the right place. Upon completion, click ENTER.

   

   The result of the tools:

   

We are today on one simple example We learned to remove unnecessary objects with photos and restore damaged items.

There are such cases when the frame turned out to be insanely cool, but some items are prevented: passersby people, cars, wires, birds and other random items. In this article we will tell you how to remove the subject with the photo on the phone in a matter of seconds!

Snapseed

If you do not know how to remove unnecessary items online and free, use the Snapseed app. This is the easiest option from all presented. You can download it completely free of charge in the official stores of the AppStore and Google Play.

How to remove an unnecessary subject from the photo:

1. Open application Snapseed.
2. Press Tool-point correction.
3. Close with your fingers closer.
4. Careful tap on the screen to remove the object or item with a photo in Snapseed.

FaceTune.

The second application that removes objects in the photo is called FaceTune. The program is paid, but often happens on Scrisks in the AppStore (for only 15 rubles). If you do not want to buy the application, you can take advantage free analogue FaceTune 2. It has exactly the same function.

How to remove the subject with photos on iPhone and Android:

1. Open program FaceTune..
2. At the bottom go to the item "Patch".
3. Click on the item to be removed. There will be 2 circles. The first is the zone of the item, and the second is a circle with the surface on which the first part can be replaced. Circles can be moved in any direction by selecting the optimal option.
4. Point movements handle photos and save it to the gallery.

Touch Retouch is a program that removes items in the photo in a matter of minutes. But it is paid, costs 149 rubles (price for 2018).

Photoshop Fix

Remove the unnecessary item or people with photos on the phone will help the application Photoshop Fix. It is absolutely free available for jump in official stores.

How to remove an item with a photo through the application:

1. Open Photoshop Fix application.
2. Sign up or logged in through Facebook or Google Play.
3. Open the desired photo.
4. In the bottom menu, click on the plaster icon "Restoration".
5. In this program there is Point recovery, there is Stamp, Patch, Effect of red eyes and Eraserwhich restores if you don't like something.
6. For processing it is best to bring the photo to the touch of fingers.
7. If you chose item "Stamp", First you need to click on the surface next to an unnecessary subject and put a mark (circle), but where it is not. It is cloning that areas we will remove the subject with the photo.
8. To touch the finger of that element to be removed from the photo, and gently step by step to erase it.
9. Save photo to the gallery!

Union

AND last programwhich removes unnecessary items with the photo is called Union. The application is paid and costs 379 rubles (price for 2019).

How to remove an item with a photo in a photo editor:

1. Open application Union.
2. For Background. Upload a snapshot in which you need to make changes.
3. For Foreground. Upload clean photos where there are no foreign objects: wires, cars, people, etc.
4. So that the layers smoothly lay down on each other, you can remove a little intensity, and then return it back.
5. Click on the Mask. and Eraser Carefully erase the entire layer.
6. Next, tap on the brush and paint all the unnecessary space.
7. If you need to repeat the layer mask, then you must click on Flatten. and add a photo on Foreground..
8. Save the image into the gallery.

FROMorvi Ovation

Be the most stylish! Use supere effects.