In this article, I will consider popular recovery programs. remote files from a flash drive. Very often happens that you format the USB flash drive together with the desired files. If you do not know how to restore files after formatting a flash drive, read this article.

Data recovery from flash drive - A process in which the files and folders are restored after formatting a flash drive, delete data from it or a flash drive recovery. Often, almost all files manage to restore from the flash drive, if it has not been formatted several times (we will conduct such experiments below in the article).

Formatted a USB flash drive with the necessary files. What to do.

Imagine a typical case: we have a plain flash drive, in my case it is transcend on 32 gigabytes and we made a quick formatting of the flash drive or simply deleted the files and we need to restore them. Here be careful if you made a complete "slow" formatting of your flash drive, then in this case you are unlikely to restore all the data on it.

Programs to restore remote files from a flash drive

There are many programs to restore remote files from a flash drive. The most popular recovery programs are Recuva., R.Saver and Dmde.. In this article we consider all three programs and choose bEST PROGRAM To restore files from a flash drive.

Remember that you do not need to restore deleted files from the flash drive to the same flash drive. In this case, you will restart the data and if any data could not be restored from the first time, then you are hardly restored. It is best to record restored files to some folder on your computer hard drive.

Restore remote files from a flash drive using the Recuva program.

Recuva - free utilitywhich can restore deleted files from your disk or flash drive. The program is written in the C ++ programming language, works under Windows and has a small size.

You can download the Recuva program from the official website to the address:

http://www.piriform.com/recuva/download/standard

During the installation process, do not forget to remove the checkboxes from the items with additional software, otherwise you will install superfluous unnecessary programs:

After installation, click Next, select what you want to restore all files, then specify the place where these files are located (your USB flash drive), and at the last point choose to enable an in-depth analysis. Now press the Start button.

The average scanning time of files on the flash drive is 15 - 20 minutes, so you have to wait a bit.

As soon as the scanning of files on the flash drive is running out, you will see the following window:

Select the files you want to restore, right-click and select the menu item to restore the selected. So your files will be restored.

Using the Recuva program, you can restore almost all files deleted files from the flash drive. In my case, remote windows files 10. It is clear that these files are not needed by anyone and in your case you can restore remote music, video, photos, while in a word, everything that you have on the flash drive.

How to restore remote files and folders from a flash drive using the R.Saver program.

R.Saver is a tiny utility with a size of 932 kilobytes. Despite the fact that the program developer stated that it works on operating systems not higher than Windows 7, R.Saver works perfectly on the operating room windows system 10.

By the way, this program, unlike Recuva, does not require installation.

To test the R.Saver program, we will also use the TRANSCEND flash drive to 32 gigabytes, but now we format it twice all, then write three pictures on it and make quick formatting. Let's see if the R.Saver program will cope with data recovery from such a flash drive.

So, to recover data from a flash drive using the Recuva program you must select your flash drive in the main window of the program hDD, Press it right-click and select Search Lost Data item. The reconstruction of the file system will start and on the last step you will have a program window, with files broken by type.

In my case, I had to see three pictures that I recorded on the USB flash drive before formatting.

These files are:

It remains only to restore files using this program. To do this, you need to right-click on the folder tree on the left and choose from copying ...

In the window that appears, you select the folder where you want to save files. Do not choose a flash drive, save the files to the hard drive. As I said, it is impossible to overwrite the USB flash drive now.

Copy recovered files to a computer will be copied. My files recovered without problems, but unfortunately without file names. File names have become new. But what is more important than file names or content? Answer I think is clear.

Restoring data from a flash drive using the DMDE program.

The program as well as R.Saver weighs very little and does not require installation. That for such a plan program is a big plus. To begin with, we are asked to choose a flash drive with which we would like to restore our data. Choosing it.

The window will then appear with sections. In the window that appears, click on the button full scanning And then the Scan button once again. We are waiting for the results of the program scanning 15-20 minutes.

As a result, you will have a window in which you will see your files by type. Now you can restore files, but in free version You can restore only one file, which is of course minus.

In addition, the DMDE program has a not very friendly interface, and since most computer users are newbies, for such people we do not recommend this program.

Outcome.

In this article, we reviewed three programs to restore remote files from the flash drive after formatting. Two of these programs to recover data from flash drives are free. In my opinion, R.Saver and Recuva programs are ideal for you. The DMDE program is also not bad, but unfortunately paid.

By the way, in some cases, the Recuva program will be able to restore remote files while saving paths. In general, now the Recuva program can be called the most popular program to recover data from the flash drive.

All three programs to restore files from the flash drive perfectly worked on operating system Windows 10. In my opinion, the most convenient program Program Recuva, despite the fact that it required the installation.

Hello, my distinguished friends, blog readers and gadget lovers!

Yesterday I made a mistake, and clicking not there, fully formatted a USB drive. There were important files, and a couple of pictures that I am expensive. Already there was already lowering hands, I decided that everything was completely lost, however, I could not resist and decided to dig up on the network about this issue, and not only went on a lot of useful info, but I learned how to restore the formatted flash drive. Today I will tell you in detail how and what to do it! Go!

Precautions

I would like to immediately give you some tips, what to do is not, after you formatted the carrier. First, do not even try to sign up for it. It thorrel will reduce the likelihood that you will be able to return information from the container. The fact is that at the same time, files will already be recorded in the clean sectors on the flash drive.

It is best to immediately remove the flash drive from the camera or another gadget. Then you need to use one of the programs that I will describe below.

Recuva.

Download Soft you can here.

Excellent software that allows even after multiple formatting to restore files. Recuva, despite the fact that it is powerful software, still has a simple user interface. Open the software and see this window.

Since we will restore all files, we select this mode and data types. Zhmem. further And go to another step.

Now you specify the carrier. We prescribe the exact path to the folder. This means that we choose a certain place where the program will look for the remaining info about remote files. Then Zhmem. further.

Here we include an in-depth analysis. Thus, we extend the scan time, however, it will be conducted using modern algorithms. Go forward.

After scanning, you will see here such files. Red marked data that cannot be restored. Yellow - partially possible to return. Well, the green data most likely can be returned completely. We celebrate only green.

So, now allocate all that we need and click further. The scanning and recovery process will go. That's all.

Transcend Recoverx

Download you can here.

Despite the name, the software works with any flash drives and firms, even with micro SD and Kingston. Open software And choose our carrier.

Now select the file types and go ahead. The scan process will be passed, and you will see a list of all the information that you can still try to restore. Let in our case they will be pictures.

Choose everything you need and start.

After completion, we will see this graphic report.

All we did everything possible with this software.

R.Saver

Free download you can here.

After installation, we see this window. Close the warning sign.

In the interface, click on the search for lost data.

There will be a plate with two options. Since we did not simply delete files, and also formatted the media, then we need a sectoral scan.

Once the scan passes, we will see the list of files available for recovery.

It is noteworthy that the program works better with NTFS, and not with FAT32.

Disk Drill for Windows

Previously, the program was developed exclusively for macintasks, however, now there is a version for Windows. Swing here.

We open the software and see this window in which you need to immediately select the media for scanning.

After the operation, we see a list of data that can be viewed in advance. After that, we simply restore those that we need.

The program is perfect for those who are going to work with a flash drive, which was on the phone or in the tablet.

Restoration with the help of the Russian version of R-Studio

Download Softtka can be from here.

And so, run the software and see this is the interface in which you choose a carrier for scanning.

Choose all the types of files that are and click scan button. Or choose only those you need.

This is a simple in circulation and at the same time a powerful utility for returning lost data.

To restore, you will need to select media from the list on the left side of the program window, and then click the QuickScan button.

The navigator to the right will appear the media structure. Deleted files will be indicated by white icons.

Then it is enough to highlight the necessary documents and click the Restore button. In the dialog box, specify the directory to save the recovered files and approve the recovery.

Upon completion of the process, the recovered files will be ready to use.

Advantages:

The possibility of working S. large quantity carriers (up to a cruel disk);

Easy to master and friendly interface;

The presence of a free version.

Disadvantages:

Lack of Russian localization;

The free version has a limit on the size of the files recovered.

Recuva.

A free utility disseminated not only works with flash media, but also provides data from the disk.

After starting the program proposes to select media, then the type of file.

Point "Enable In-depth Analysis" will increase the chances of detecting lost data.

In the left part of the program window there will be a list of files detected on the media. It is enough to mention the checkbox opposite the necessary and click "Restore."

Then you will need to specify the directory to save the data and approve the process.

By completing it, the files will be ready to use.

Advantages:

Completely free distribution;

Large set of functions;

Opportunity complete removal Falov.

Disadvantages:

In some cases, it does not restore the contents of the file.

Easy Recovery.

An intuitive program interface allows you to quickly restore lost files. To restore lost data, it is enough to choose the type of media.

From the received list, select a specific medium.

Then you need to choose whether the data was deleted or formatted. After scanning, the carrier file appears on the left side of the window.

Folder-highlighted folders - existing, green - erased or unchecked.

To restore, you will need to select the necessary files and in the menu dropping by right clicks, select the "Save As" item.

After specifying a place to save, the files will be available to use.

Advantages:

High recovery percentage;

Intuitive interface;

Ability to work with a multitude of media types.

Disadvantages:

High cost of paid version;

The trial version allows you to extract only one file at a time.

Auslogic File Recovery.

The program allows you to effectively restore lost data from both flash drives and hard disks.

In the left side of the window there is a navigator in which you need to select a carrier for the recovery procedure. Options will be presented in the right.

You can restore a specific type of files, and you can scan for all types.

Upon completion of the search, the main part of the window will be the list of falams. It is enough to choose interest and click "Recover SELECT".

After saving to the specified directory with palams, it is possible to work freely.

Advantages:

Accurate search mode saves time;

The ability to work in simple and complex modes of work, depending on the level of user preparation;

Full removal function of confidential files.

Disadvantages:

Trial version for 15 days;

Non-optimized interface.

GetDataback

Detailed instructions accompanying each data recovery step will help to cope with the program even to users with minimal knowledge marget.

In the first step, you will need to choose a carrier. On the left side of the screen will be the list available. In the second step, you will need to select the type of file system.

Standard for flash drives file system - FAT32, but options are also possible.

In the third step in the program window there will be a deployed navigator for a scanned media. All files will be placed according to the legend at the bottom of the window.

Now it will only remain copied the necessary.

Restoring formatted flash drive: How to return deleted files?

Benefits

Partition Recovery. - Professional utility for recovering photos, documents, music from any media. It can be a hard drive, a flash drive, a memory card and other removable drives. The program allows you to correct damaged files Both sectors returning the initial structure of the disk partition table. Thanks to a convenient wizard and preview function, the entire recovery process of lost files for the user is very simple and visual. After starting the application, first of all, you must select the desired device.

Start scanning

Automatically starts the recovery wizard. In the first window you need to choose the type of scan - the full analysis takes more time, but gives more accurate results. Then click "Next" and wait for the completion of the process. As a result, the storage structure with a list of remote files will appear on the screen. For more convenient search You can go to the "Deep Analysis" submenu.

Start recovery

Now you need to select a specific file or folder, right-click and select "Restore" in the drop-down list. Indicate the save method (on a hard disk, CD / DVD, in a virtual image or FTP) and click "Next". Do not forget to check to have enough free disk space.
The final stage - specify the path to the save folder and some other parameters (restore folder structure and alternative data streams, replacing unknown characters). Press the "Restore" button.

Unfortunately, the loss of data contained on removable devices like ordinary flash drives or memory cards is one of the most common phenomena. And it is not always connected with physical breakdowns or software failures. Formatting (fast, complete or incorrect) also creates such a problem. However, it is possible to produce from the flash drive after formatting. IN Windows Own tools for this no, so all hope on third-party programs. Many of them cope with such tasks very successfully.

Restoring flash drive after formatting: basic principles

If anyone knows, in the process of formatting removable drives and hard drives or with normal deletion of files and folders, information is in physical terms.

In fact, objects are assigned to other names and attributes (in the simplest case, the first letter of name is changed on the name of the dollar "$"). Due to this, the object is unreadable, since the system simply does not see it. This is the most primitive example.

Thus, initially restoring the flash drive after formatting and all the information on it was previously present, it is reduced to find all objects marked with the specified characters. But today technologies stepped far ahead and restoration can be carried out according to some other criteria and using completely other means.

Data recovery from flash drive after formatting: best programs

Today, the means to restore data on any types of devices are offered a lot. Not all of them are equivalent to among themselves to capabilities or recommendations for use by users of a certain level of preparation. Nevertheless, among all utilities that are the most popular and in demand, the following can be distinguished:

• Recuva;
• Auslogic File Recovery;
• RS Partition Recovery;
• R-Studio;
• R. Saver.

Let us dwell on each of them separately.

Recuva and Auslogic File Recovery

To begin with, consider after formatting using the first two utilities, which, according to experts and users, are the most simple in use.

The first application is convenient because after specifying the device being scanned to restore the user, the user will have the ability to select the type of object being defined (music, video, images, etc.). If a complete scan is required, regardless of the object type, you can specify the definition of all files, then just press the start button.

In the list of results, the found files and folders will be marked with different colors. Green - the file is not damaged and can be restored, yellow - perhaps the file can be restored (sometimes partially), the red - the recovery file is not subject to the restoration. Next, only to select objects to restore and specify the path to save them (preferably on the hard disk).

The second flash drive works almost in the same way, however, among its drawbacks, it can be noted that, in contrast to the first (free), it is conditional free. The trial period of use is only 15 days. But in both cases, the recovery of the flash drive after formatting is these utilities it looks far from ideal, because most often the objects found cannot be restored, and recently deleted large files are not always.

RS Partition Recovery.

This program, according to many, deserves all sorts of praise. Among its capabilities, it is worth noting an improved system of deep analysis, as well as the possibility of using filters (date, type of object, size, etc.).

After starting the scanning process with the selected conditions, after a certain period of time, the screen will show the results for which you can choose the recovery individual files and folders or even entire sections. To activate the recovery process, selected objects need to simply add to the recovery list section through the right click menu. At the next stage, the method is selected and the place of conservation, while the drive itself cannot be used as a place.

R-Studio and R. Saver

Finally, we have the most powerful after formatting. According to many specialists equal to the search and recovery software utilities today. By the way, one more confirmation is contained in the Internet reviews on the Internet, which used it in practice. The fact is that the application is able to find such files that the user has long forgotten. Roughly speaking, the program finds almost everything that has ever been kept on the drive. And it is this application that is most often used to restore information on problematic SD cards, even if there is software failures or even damage to controllers.

Unlike the simplest utilities that, even with deep analysis, the search is carried out very quickly, it takes a lot more time here. But the result justifies such a long expectation (for example, the SD card of the amount of 32 GB can scan 5-6 hours).

The process itself consists in choosing a drive and starting analysis. Interestingly, the current state of the process is displayed on the screen, according to how it is presented during disk defragmentation. Upon completion of the process, EXTRA FOUND FILES will appear by clicking on which you can view the complete list of found objects, and then restore them standard method Allocation and indication of the re-saving location.

Similarly, the recovery of the flash drive after formatting produces and the R. saver utility, but it is, although it is very similar, is portable (does not require a mandatory installation on a hard disk) and can restore even file Systems of any type.

Instead of the result

In general, questions of recovery of information on formatted flash drives and removable memory cards are solved simply enough. What program from all the diversity to prefer? Think optimal option R-Studio and R. Saver utilities will become. Of course, the scan will take a certain time, but the files that can be restored in the future will be found much more, not to mention the restoration option itself (Recuva loses these applications in all respects).