Attention! Those who have the operator is the HCC company, it is better to wait for the fixes of bugs in new firmware... Or you will have to switch to another operator. Smartphones running Symbian Belle Refresh for some unknown reason refuses to make and receive calls! SMS works normally, but you won't be able to call even at 112.
OS Symbian Belle Refresh brings the following innovations:
However, as is usually the case, you should expect some applications that were running on previous version ON.
Renewal methods (myths and reality)
According to the developers, for a successful system update, it is enough to download and launch the new version Nokia Suite, connect your smartphone to your computer using a USB cable and follow the instructions. At the same time, all contacts, notes in notes and other important data will be saved, and only a few may suffer. installed applications... In reality, everything is not so smooth and most users experience so-called glitches, slowdowns and other manifestations of unstable smartphone operation. Experimentally, three ways of updating smartphones have been identified, which ensure stable operation of devices after installing OS Symbian Belle Refresh, and all of them are not without sacrifices.The first method is simpler, but most users are already too late to use it. So, for a successful update, it is advisable to get rid of everything that you have ever installed in your smartphone. Simply put, you need to reset to factory settings using the combination * # 7370 #, but before that, it is advisable to format the built-in memory (drive E - Nokia N8). Then you can launch Nokia Suite and it will prompt you to do the rest. All that remains is to follow the instructions.
If you have already tried to update your smartphone to OS Symbian Belle Refresh, but did not reset and format the memory, and after the update felt that the smartphone is not working stably, you can try to reset, format the internal memory of the device (or memory card) and reinstall the new version Software using the same Nokia Suite.
If you decide on a complete flashing of your smartphone, Phoenix will come to your aid, which we will tell you about in more detail.
For the firmware you need:
Take your time with the second point, since the above Phoenix in most cases works stably without using the second and third programs. If problems arise and Phoenix does not see the smartphone, then you will have to use the Nokia Service Application Manager to remove everything related to Nokia, and then install a single driver and Phoenix itself.
Attention! Phoenix is installed long enough even on powerful computers... Therefore, do not panic if it seemed to you that the computer is frozen!
Special attention!!! All programs, including firmware, can be installed only by right-clicking on the shortcut, with the choice of administrator rights! Phoenix launch is similar!
On Windows XP, there are problems with the choice of administrator rights. If you have a similar situation, we skip this step and do it as usual.
Symbian Belle Refresh firmware
Naturally, you will need the firmware itself, which must be installed in the same folder where Phoenix was installed:Working with Phoenix
So, Phoenix is installed, the firmware is also installed. Move on. We launch phoenix (with administrator rights), connect the smartphone to the computer via a USB cable and see a window. You may need to wait a little (30-60 seconds) to install the drivers.
Click on the NO CONNECTION line and select the RM-XXX connection (XXX is your product code version). The word Ready should appear at the bottom left of the window.
After that, go to the upper tabs of the program window. We press File> Scan Product and wait for something like this to appear in the bottom pane of the window:
Then again go to the top tabs and click Flashing -> Firmware Update, after which a new small window will open in which the product code of your smartphone should appear.
If the column with the product code remains empty, click on the small button with an ellipsis and select the desired product code from the list that appears in the new window. If there is a check mark in the "Detect Produkt Automatically" window, uncheck it and select the product code manually.
In this list, you need to select any product code similar to your smartphone, for example, if you are from Ukraine and you have a black phone, then select the product code with the name xxx_ukraine_black or xxx_ukr_black (dg - dark gray), (white smartphone - WHITE, etc.), but in general, you can choose any product code you like, because they all include Russian. The main thing is that the three numbers after the letters RM coincide with those that you saw when you dialed the combination * # 0000 #.
Attention! If you select a Kazakhstan product code, then your FM-translator (Nokia N8) may disappear.
Then click OK, and after closing the window with the product codes, click in the left window on the button Update Software... The firmware will start, which should end with the appearance of this window:
After the handles stretch on the smartphone screen, you can disconnect the smartphone from the computer and start setting up accounts and everything else that is required in everyday life. That is, you can start using the "new" smartphone. Congratulations!
Dead mode flashing or bringing a dead smartphone back to life
There is a slightly different outcome of "dancing with a tambourine" while flashing smartphones or simply, as a result of your experiments with various programs. In simple terms, sometimes a firmware crash happens. In this case, the smartphone does not turn on and all that you can see when you try to turn on the device is White screen with NOKIA lettering. In this case, you should not panic if you did not downgrade the firmware version, since you can return the firmware even in dead mode.To do this, you will need the same Phoenix, but you need to launch it in a different way. First, Phoenix is launched without connecting a smartphone to a computer. Secondly, we do not touch the NO CONNECTION window and immediately go to the File tab, and then select Open Product.
Then we select our product code from the presented list:
Then again go to the Flashing tab, click on the Firmware Update line and see the window that appears. First of all, you need to check the "Dead Phone USB flashing" checkbox.
Then, if your firmware is not indicated in the product code line, click on [...], after which another small window will open with a list of available product codes. If there is a check mark next to "Detect Produkt Automatically", uncheck it and select the product code manually.
Choose the one that matches your country and smartphone color. After that, press the OK button in this window and go to the left small window. Click on the SW Reset button and see the following (or similar) window:
To continue the firmware, you must follow the points indicated in the small window.
For example, for Nokia N8, the steps are as follows:
- Disconnect the USB cable (but we didn't even connect it).
- Hold the power button for 8-10 seconds (up to triple vibration).
- Connect the USB cable to your smartphone.
- Click on the OK button.
For example:
- Disconnect USB cable.
- Remove the battery from the smartphone.
- Connect USB cable.
- Insert the battery and press the power button
- Press the OK button
And other options ...
Whatever they are, they must return to life the smartphone on which the firmware has flown (except when the latter is downgraded).
If it doesn't work the first time, try again, and again. In case of failure when flashing through the SW Reset button, you can try to flash through the Refurbish button. The main thing is not to give up and everything will definitely work out.
Attention! All actions performed with your (and even more so someone else's) smartphone, you perform at your own peril and risk. The site administration is not responsible for the performance of smartphones.
To work with the Phoenix program, it is recommended to use only the original USB cable that came with your smartphone!
After software update Nokia smartphones up to version 111.040.1511 - Symbian Belle Refresh, they are easy to crack. To do this, you must follow the instructions for those who installed the Belle FP1 update and activate the Install Server RP + v1.7.rmp patch.
The news about the release of this update was brought by our active user -.
Good luck with your firmware!
For Nokia devices running on Symbian ^ 3, 9.4 and 9.3(not all, only with latest firmware) this is the only way to hack... More precisely, he the only one only for those who did not receive a personal certificate before June 23, you can read more about the situation with the issuance of certificates in. If I have a personal certificate, we hack using the program right on your phone. For some (?) Devices working on 9.1 - 9.2 and older versions 9.3 there is a way to hack without certificates, slightly more difficult than Just HackIt !, but 100% effective when following the instructions from the description, he is described.
1.
2.
3.
Everything!
4.
5.
6.
7.
8.
9.
not necessary
10.
Actually, what we need:
1.
2.
3.
Due to the unique features of these devices, and maybe the Phoenix, it is necessary to make some corrections in our actions. During the execution of point number two, in the window with additional functions and with the list of components put a tick in front of Stay in Flash Mode , otherwise follow the instructions. After the end of the firmware, as you will see the final message about successful completion, the phone will be in Flash Mode, in order to transfer it to a normal state, there are two options: in the upper right corner, where it says "Operating Mode", select Normal, or just take it out- insert the battery.
Part number zero.
Preparation.
Phoenix, of course you need to install it, I wrote a little about the installation above, I will not repeat myself. The firmware is in the SFX archive, I think not everyone will understand what it is, but that's not the point, just run exe file with the firmware, click OK and wait for the unpacking to finish, you do not need to choose the unpacking path, the unpacker itself chooses the desired one, including on 64-bit systems. We unpack the hacking file from the zip archive to a convenient place for you, on the desktop, for example.
We take out the computer-phone cable. It is advisable to use original cable from the kit, not from cameras and similar devices, It is also better to forget about the USB extension cable for the duration of the firmware, otherwise there may be disastrous consequences.
Part number one.
Launch and setup.
a) We are considering the case with the firmware in full a working phone, so we connect it to the computer in Nokia Ovi / PC Suite mode. If you connect the phone for the first time, it is better to wait until the system automatically finds and installs required drivers, then you can safely launch Phoenix. After starting, the program should automatically pick up and identify the phone, in the so-called mini connection manager, which is signed with the word "Connections", this will be displayed as USB # - RM - ### (instead of # there can be any numbers), if this did not happen, then look at the screenshot below and select it manually. 
b) Next, go to the horizontal menu, select File> Scan Product (you can use the Ctrl + R hotkeys), at the very bottom, in the status bar, changes should take place, information about the connected phone and Ready will appear, collecting information may take several minutes.
v) Again, hover the cursor over the menu, this time Flashing -> Update Firmware, a new small window will open. If nothing appeared opposite the Product Code, that is, the product code was not detected automatically, click a little to the right on the [...] button and select any similar product code: for example, if you are from Ukraine and you have a black phone, then select the product code with the name ukraine_black or ukr_black, but if there is nothing similar, we simply select any code, they are all included in the Russian language.
Part number two.
We deal with the firmware files.
We don't go far, in the same window we press Options, we see a list of firmware components and additional options, we are working with the first one.
a) Let's start by replacing the original file with the hacked one, open it, find our model and in the column to the right we look at which file needs to be changed, select this file in the program and click Edit, opposite the path, click the already familiar [...] button and select the hacked file, which we previously unpacked to the desktop (!).
b) It remains to delete the additional content file, otherwise you will see an error when starting the firmware. Everything is very simple here - we look at the same list of firmware components and delete the file that is highlighted in red. We delete by clicking on Delete, if anyone does not understand. If you are the owner of N73 / N82 / N95 and the like, do not forget about the addition, which is described at the beginning of the article under the spoiler, otherwise nothing will work.
Close the Firmware Update Advanced Options window by clicking OK, return to the Firmware Update window.
Part number three.
Completion.
Everything. The most difficult thing is behind us, with a slight movement of our hand we press Refurbish and see how your phone is being stitched, although there is nothing interesting about that.
If you did everything correctly, no problems and errors should arise, you will see a notification about the successful firmware. 
As soon as the phone starts to turn on itself, you can disconnect the cable, close the Phoenix.
Now the phone will accept absolutely all applications, games and themes, what certificates it will forget. To access system folders you need to install and activate the Open4All patch. But this is not necessary, it all depends on your needs.
If you still have questions, and they arise, how could they not help you on the forum, you can contact people who know well, if not all, then many of the intricacies of the firmware individually, we have four of these in the team:, and.
DimonVideo DimonVideo
Few, or even a lot of important words and advice about Phoenix to avoid silly questions.
1.
The Phoenix program is completely autonomous, no Internet connection is required to work, it works with a local firmware database.
2.
All instructions are equally suitable for both Windows 7 and XP and Vista, the bitness and version of the system are also not important, everything is absolutely the same.
3.
Installing Phoenix is very simple. Run the installer, click Next several times and wait for the installation to complete. Everything!, there is nothing difficult and scary. And don't worry about the length of time, the setup does take quite a long time, especially on weak technique. After installation, restart your computer.
4.
It is advisable not to change the installation directory, install as suggested in!: / Program Files (x86) / Nokia. But I won't deny that everything can work without problems and from a non-standard directory, it's just that no one has yet fully experimented with this.
5.
Use current version, the use of older versions can lead to a lot of questions about the inconsistency with the description. With the release of each new version work is underway to correct old errors and expand functionality, do not spare 100+ megabytes of traffic.
6.
Do not be afraid to experiment within reason, turn on your head. I have only one phone, I cannot know all the possible errors and nuances that may appear during the firmware, so try to solve the problems yourself, but do not forget to share solutions with users in the comments.
7.
No need to take out your USB stick and sim card before flashing. And do not worry about incoming calls and SMS, the phone will be in special regime in which network connection is not possible.
8.
If an incomprehensible error appears during startup, remove all Nokia software with the help and install Phoenix again. And remove manually the leftovers from Phoenix, this is the folder!: / Program Files / Nokia / Phoenix.
9.
Format your phone before flashing not necessary... During the flashing, the phone memory (drive C) will be completely overwritten.
10.
Before starting Phoenix, it is advisable to disable the antivirus, as well as programs affecting appearance interface - Bins and the like.
If you haven't run away to hack in other suitable ways, which I described in the first paragraph, then let's start. The main thing is not to forget to make backups of everything you need, it will not be pleasant to lose important data such as contacts, messages and calendar. And remember, your phone will not be removed from the warranty after flashing and hacking! Even before going to the SC, you may not format your device, none of the employees will check for the presence of installserver.exe in c: / sys / bin, never.
Actually, what we need:
1.
Phoenix. On the forum there is, in the header you will find a link to the current version, download it if you have not done it before. And I must say right away that it is advisable to ask all questions regarding the operation and settings of the program in the same thread on the forum, and not in the comments of the article.
2.
Firmware. All firmwares are conveniently collected in one place, in a section. Be careful, if your phone was purchased not in an authorized mobile store, make sure that the RM identifier opposite the model in the list of firmware matches what is under your battery, otherwise nothing good will come of it.
3.
Hack file. Here we also collected everything in one place, you do not need to run around the themes of the firmware of your model and search desired file - .
And I will not wish good luck, why do you need it? Just follow the instructions.">
I have long wanted to write an article on the transition from symbian to android, of which there were a great many at one time. It is for this reason that I did not undertake it. But in May 2013, on our beloved site, the site launched a contest of articles on the topic of who and how uses his smartphone in everyday life. It seemed to me more interesting as a topic for writing an article and I decided to join the ranks of the participants too.
It was here that more than one generation of smartphones "grew up". It is on this site that adequate, useful and high-quality information is posted. Of all the large similar resources in Runet, I think it is the best!
I will make a small introduction just on the topic of the transition from one axis to another.
In December 2012, the brutal and merciless force of chance dragged me into the store and forced me to buy a brand new smartphone running the now ubiquitous Android. On the same evening, the search and digestion of information on obtaining the root and firmware of the device began. For two weeks I experimented as best I could. Was looking for good firmware, core, software. Everything was new, incomprehensible and radically different from the symbian. After the end of all the abuse of the device, I got a device that replaced my desktop PC even more than a Nokia with its symbian. Although, of course, I had to get used to the sensor (and not to the hardware buttons), to differently working multitasking and to the fact that when active use you have to charge your smartphone 2-3 times a day. But today for me this is already in the past, I am completely accustomed to the android, all its quirks and absolutely satisfied with it.
With the introduction finished, I'll move on to the main topic.
Neither THE AUTHOR OF THE ARTICLE OR THE SITE ADMINISTRATION SHALL BE RESPONSIBLE FOR YOUR DAMAGE TO YOUR PROPERTY IN THE INPUT OF THE REQUEST. EVERYTHING HAS TO BE DONE AT YOUR OWN RISK
Ask yourself a question ... DO YOU NEED IT?
Owners for many years Nokia phones They could not understand in any way why users of Siemens, Motoroll-ok and other smartphones can reflash their device at home, but they cannot. It was necessary to buy special boxes (flashers) and only with their help carry out a flashing. Or go to the SC. (Service center)
But now the ice has broken ... Nokia decided to please its fans and allowed users to flash smartphones BB5 and higher (everything from 6630, 6680/1, 6270 (not smart), 3250, N70, N90 (and other N-series phones except Ngage), E series smartphones) at home without special equipment. The standard cable supplied (DKU-2) is enough
First, we need to find out what version of the firmware is in your phone. To do this, dial * # 0000 # in standby mode and you will see the firmware version on the screen.
If your firmware is outdated, then you need to look for a new one. Usually, the firmware is taken from the websites of flasher manufacturers (each client receives his own login password). Some sites give you the opportunity to download the firmware for a fee. We, as always, give everything for free :)
Before downloading it and starting the flashing, I advise you to go to and ask the users if it is worth reflashing at all, what problems have appeared, what problems have gone away, etc. Please note that you YOU CANNOT return the OLD FIRMWARE! The firmware number can only rise. If you try to flash your phone with an older firmware, then he will die and then you have a direct road to service center... Most likely SC will refuse you warranty repair and agree to fix it only for money.
If, despite the fear and risk of "killing" the phone, you still decided on a flashing, then let's get started.
1. If the program is installed on your computer PC Suite, then uninstall it.
2. Download the following files:
2.1 Find and download the firmware for your smartphone.
2.5a If you have 6630, 6680, 6681 then download
2.5b If you have 3250, N70, N90, etc. then download
2.6 Downloading the drivers for the cable
3. Now we start installing the programs required for flashing.
3.1 Installing the program Diego_3_06.msi
3.2 Run Crack.exe (you don't need to install it yet. Just run it) and start installing Phoenix 2004.
During the installation process, we will be delighted with an error message (Instalation cannot complete without a Dongle) We put 2 windows next to it (Error message and the Crack.exe installation window). Click Retry and at the same moment continue installing Crack.exe (replacing all files if necessary). This needs to be done very quickly. If you do not have time, then the error will come out again, if you have time, the installation will continue.
note: During installation, you may be disturbed by various windows notifying you of driver incompatibility, DESkey not fount (usually after reboot) 
etc. Despite all the warnings, we continue with the installation. 
3.3. At the end of the installation, a window will appear in which there will be 2 items:
1 - Add Phoenix icon to Desktop - put tick
2 - Open the log file EXT_2004.39.7.70.log (open the error log) - check the box NOT put
3.4 Restart your computer! (just click Finish, provided that there is a checkmark on the 1st item)
3.5 After rebooting, start Phoenix 2004 and immediately turn it off ( DO NOT close!) it is in this state that we start the installation:
phoenix_service_sw_2005_36_7_112.exe (for 6630, 6680/1) or phoenix_service_sw_2006_12_5_136.exe (for 3250, N70, N90, etc.)
3.6 At the end of the installation, you will be prompted to restart your computer. NO WAY case do not do this. (choose No I will restart computer later).
3.7 Installing the DKU-2 cable driver (Nokia_Conn_Cable_Driver_159_rus.msi)
Go to the folder C: Program FilesCommon FilesNokiaTssCdmaCommon (for 6630, 6680/1)
C: Program FilesCommon FilesNokiaTssFlash (for 3250, N70, N90, etc.)
Copy all files with the * .adl extension to the C: Program FilesNokiaPhoenixFlash folder, replacing duplicate files.
Bottom line: Now you got a ready-made program for flashing your smartphone, BUT! Until the first reboot. In the event of a reboot, you will have to repeat everything from point 3.5
4. Configuring the Phoenix program:
4.1 Launch Phoenix 2004, Click File => Manage Connections
4.3 Click the Add button
4.4 In the window that opens, select Manual
4.6 Select the USB item and click the Finish button.
If you have a Nokia 3230, N70, N90, etc. (Phoenix 2006) then after point 4.1 you just need to check the box next to the word USB and click Next
4.7 We connect the phone to the computer using the DKU-2 cable. The computer must detect the phone, install drivers, etc. 
4.8 Click in the Phoenix program, File => Scan Product (Ctrl + R). An icon in the form of a connected cable will appear in the lower right corner.
5. Let's start flashing.
note: I recommend removing the memory card from the smartphone and formatting it (* # 7370 # or "acrobatic" method). I also recommend charging the battery.
note: Just in case, turn off the screensaver on your PC (Right click on the desktop, properties, screensaver). I also advise you to disable RAM defragmenters (if any) and other crap.
5.1 Unpack the downloaded firmware
5.2 Click in Phoenix at the top Flashing => SW Update (Firmware, Update software)
5.3 In a new window, you must select Image file - Firmware file (* .C0R)
5.4 Select PPM File - Language Pack (* .vXX, where XX is the package number.)
For 6630, 6680, 6681 The language pack file will be with the extension * .v27 (Russian) 
For N70, N90, etc. the firmware file will have the extension * .C0, and the language pack * .V05
(Russian, Ukrainian, Bulgarian)
For Nokia3250 we register the following files:
ImageFil - RM-38Thunder_03.21_Core.fpsx
PPMFile - RM-38Thunder_03.21_Variant_05.fpsx
ContentFile - RM-38Thunder_03.21_LFFS_Image_EMEA.fpsx
5.5 We are waiting for the device data to be calculated.
Examine the work surface. Nothing should be dangling, no cats, mice, parrots, strangers, etc. should be around. etc.
5.6 Press the Start button and hold your breath.
Various information related to the process of flashing the smart will run in the program window. At this time, it is better not to touch anything.
When a message appears that the phone is in Test mode, turn it on (without disconnecting from the PC) and close the message. After rebooting, you should see a message about a successful firmware update.
After flashing, the phone needs to be rebooted and formatted.
If everything went well, then I can only congratulate you
if not, if the phone is dead, then Ladofon.ru will help you.
When writing this manual, materials from the sites were used:
europe.nokia.com
forum.dotsis.com
mobile-files.ru
i-phone.org
Good day, you want to have Symbian Anna?
Yes, in fact, it already exists and you can already download it, but this particular firmware will be a little better, because you know about the need for certificates, at least you should know what a certificate is, I think so, although I will not be lazy describe. There are times when you cannot start the game, or the program, anything can happen, but when the "Error in the certificate" is written out, this application seems to be screaming for what you need a certificate, no, of course, you can get a certificate, but it will be now not complete. This firmware has already been cracked, which means that the new update, plus everything is already cracked, and therefore does not require certificates.
This firmware is not official, but fully functional, which means that you only need to install it on your Nokia and use it.
It can be used only on the following phones: , C6-01, E7(X7 and E6 already have this firmware installed immediately, but if you wish, then everything depends only on you, our site is not responsible for this), but this particular firmware was made for Nokia N8.
Firmware description (Symbian Anna):
Fully Russified;
- Input languages: Russian, English and Ukrainian;
- Removed help, manual and advice system;
- Already embedded Nokia Theme Black (from PR1.2);
- Optimal settings performance with the OpenGles 2.0 engine; (honestly, I don't know what it is);
- Already installed QT libraries version 4.7.3;
- Installed Installserver (for hacking into the kernel);
- Ability to edit the equalizer (it was impossible with the coming firmware);
- Slightly changed the menu hierarchy;
- Changed animation (in the style of Bios);
- Disabled the restriction when sending multimedia messages, because by default 300kb;
- Disabled greetings when the smartphone is first turned on;
- The default language is Russian;
- In contacts there is a display of SIM card numbers;
- There is a possibility of creating 6 desktops;
- Music player searches for music only from discs E and F;
- Removed all charging notifications;
- The item "Lock screen and keyboard" has been changed to "Restart";
- Bluetooth keeps working when Offline mode is turned on;
- Improved photo quality 12MP: compression 3% - Improved photo quality 9MP: compression 2%;
- Autofocus for video;
- 720p video quality: 30fps / sec, max. bit rate 14.5 Mbps, audio recording 288 kbps;
- After a hard cut, it remains a hack.
At the request of Ilya Kurgashov, who has already tried the firmware on his Nokia N8, and wrote just a few words about the pros and cons of the firmware, and also described how to install the firmware on the phone. He also helped the writing of this article with information.
Cons: I personally didn't notice, maybe someone won't like the interface, but there's nothing you can do about it!
Pros: The performance has not increased directly to heavenly heights, but noticeably, the life time has also increased by about 20%;
Installing Symbian Anna:
Before installing, it is better to remove everything from the phone, or even better to do backup all files, after which it is imperative to make a hard reset (* # 7330 #).
Download these files:
Phoenix, to install the firmware on a smartphone
Symbian Anna firmware for Nokia N8
After installing the phoenix, then the firmware itself. Next, you need to restart your computer.
There are two options for installing the program:
If you have 64 bit Windows version, you need to read point 1, if not, go directly to point 2.
Paragraph 1.
Installed Phoenix can be found in Program files (x86), and the firmware itself in regular Program files. Go to C: \ Program Files \ Nokia \ Phoenix \ Products and copy the “RM-596” folder and move it to C: \ Program Files (x86) \ Nokia \ Phoenix \ Products.
Point 2.
Then what comes out is that you installed the phoenix and the firmware (moved to the folder according to point 1), uninstall OVI Suite and everything related to Nokia, for example Map loader, and so on. If you look at all installed programs via CCleaner, then only Nokia connectivity and Fleshing cable driver should be from Nokia, if they are not there, then you don't need to worry too much, just reboot (applies to everyone). Then connect your phone to your computer in Suite mode. After that, wait until the computer detects some drivers, and in theory, a white N8 should appear, in the taskbar (below), if it appears, then everything is fine.
Now you have to go into the phoenix itself, according to Ilya, he had an antivirus turned on, and he did not break through any warnings, but still it is better to turn it off. Well, after turning on the phoenix, press File and then select the Scan product item, an inscription with the name of the firmware designation, for example RM-569, should appear at the bottom right (maybe something else depends on the device.), And then press Fleshing -> Frimware update , in theory there is nothing there. Click on the three dots and select China_prs_dark_grey there. Then you should press Options and delete two lines that are written in red (highlight - del. (On the keyboard)). Then you agree by clicking OK, then click Referbish.
After all these actions, the installation of the firmware should begin, as Ilya said, there were no errors during the installation, and everything went very smoothly.
I remind you this article helped write Ilya Kurgashov, who wrote the installation instructions from personal experience, and also described his opinion about her.
