In this article, you will learn what is the startup in Windows 10, where it is and how to configure the autorun programs in Windows 10.
Programs added to autoloads are started immediately after turning on the computer. Autoload allows you to optimize routine operations (for example, starting Skype or antivirus immediately after turning on the computer) and save time. At the same time, in the process of working at a computer, the autoload in Windows 10 can be clogged with unnecessary and even malicious programs that will slow down the system. Therefore, it is useful to know how to delete a program from autoload.
Editing Startup in Task Manager
First of all, you need to get acquainted with the list of autoloads in the Task Manager. In order to open the startup window in the Task Manager in Windows 10, right-click on the Start menu and select "Task Manager".
If you did not enter the task manager, it will open in abbreviated form. In order to display its full view, click the "More details" button.
In the advanced task manager mode, go to the "Startup" tab.
Tip: Also, you can open Task Manager CTRL + SHIFT + ESC key combination.
In the currently opened tab, the Task Manager in the Task Manager, you can view the list of all programs in the autoload (the data is taken from the registry and from the "Auto-loading" service folder), their effect on the Windows 10 boot speed and the start state (on or disabled automatic launch of these programs) .
condition Disabled or enabled. Programs configured to start immediately after the start of Windows 10 have the status "on". Accordingly, those programs that should not start immediately after starting have a "disabled" state.
Impact on the download speed It is low and high. The column allows you to understand how autorun the program affects the download speed operating system. If the program selects a lot of resources when you start Windows, it is better to turn off its startup.
When you press the right-click on the program name, you can:
- disable autorun programs in Windows 10;
- open the location of the program;
- search for data on the program on the Internet;
- view program startup properties.
Adding a program to Windows 10 autoload
There are three ways to add or delete the program in autoload - adding a program (or shortcut program) in custom folder, edit registry or task scheduler. Consider all three ways.
Adding a program to autoload through a folder
To add program to autoload You need to copy the program shortcut that you want to run when Windows 10 start in service folder "Autoload". Where is the "Auto-loading" folder on the computer below.
The location of the Windows 10 autoloader folder for the current user:
C: \\ Users \\ Username \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup
The location of the Windows 10 autoloader folder for all computer users:
C: \\ PROGRAMDATA \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup
You can also open the folder with the Win + R keys and by following the command. shell: startup. (See Screenshot below).
Now copy the shortcut necessary program. In the screenshot, I copied the Skype label.
To delete a program from startup Just delete it from this folder.
Editing Windows 10 autoloading through the registry
This method of managing the autoload is suitable for more experienced users.
First you need to open the registry editor. Right-click on the Start menu and click "Run".
Tip: You can open the "Run" dialog box with the Win + R keys.
In the window that opens, type the command regedit. and click OK.
For automatic launch of programs in Windows 10, two registry branches are answered:
- HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run - for the current user of the computer;
- HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run - for all computer users.
In the registry key that opens, let's get into the branch that is responsible for autoloading the current user.
Thus, you can add any program to Windows 10 autoload via the registry editor.
Setting up program launch in Windows 10 job scheduler
In order to open a scheduler windows tasks 10 Click on the Start menu and start typing the "Task Scheduler" as shown in the screenshot below. Click on the program when it appears in the list of found.
Tip: You can start the Win + R keyword scheduler, typing the Askschd.msc command in the window that opens and pressing the OK button.
In the task scheduler window that opens, in the Job Planner Library section, you can see the list of applications and the schedule of their launch.
As a rule, there are update commands of various programs, such as Adobe Flash Player.. But, here can also be located and commands to start programs when the computer starts.
Carefully review the programs in this list. You may want to remove some tasks.
For the program to automatically started after the computer started in the job scheduler, click the "Create Task" button.
It remains only to specify which program to run at startup. Click the Actions tab and click Create. Click the Overview button and select the desired program. In the picture below in my example, I indicated the program "Notepad". After that, press the "OK" button twice.
Video How to add a program to Windows startup
We offer you to see several learning videos in which it is shown in detail how to add a program to autoload.
Hello dear reader site site, has long wanted to tell about windows startupthat you can turn off from it so that it does not appear, as well as that your running Windows became much faster!
How to disable Windows 7, 8, 10 programs
We still talk about Windows startup optimization in the following articles, as well as I have already told how to speed up Windows cleaning it or with help, as well as disabling some services. And today we will accelerate it running, Correcting the launch of programs that are loaded automatically when it launch.
There are several ways to be somewhat and correctly will do several ways, because In one way, you can not clean everything. And the method is there three, this is an internal autoloader cleaning program and a folder in the registry, as well as special program.
Purification of autoloading in three ways.
Method 1.. So, let's begin, first method It implies itself to clean the autorun internal programs. To do it click start and or Win + R keys. A window will appear in which you need to write and click eNTER.
A program to manage the system will open, open the tab at the top.
There you will see programs that are loaded when the system starts. Disconnect you unnecessary to you, just be careful, you should not turn off the programs loaded by the manufacturer, because It can be drivers. After all actions click OK.
Also not to miss anything excess in launch View folder, usually this, see if something is loaded there.
Change Folder Startup
Startup folder in the registry is on the next way:
"COMMON STARTUP" \u003d "% ProgramData% \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup"- All users of the system. "Startup" \u003d "% UserProfile% \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup" - For the current user.
And can still be scheduled tasks which you may not need. They are almost in the same place start - All Programs - Standard - Service - scheduled tasks.You can also find them in the C: \\ Windows \\ Tasks folder. Delete everything you do not need.
Second way Also implies the internal program, but with another purpose ,. To start it, click start and select perform or click win + R.. In the window, enter.
The registry editor will open, by the way if you do not know what you can see. Path startup in the registry some. That's the way:
- all programs. - Programs run once by all users. - Programs run once by the current user. - For the current user.
Unnecessary programs We also delete.
You can also add the program to autoload through the registryFor this, go for example in "Regedit.exe" \u003d "C: \\ windows \\ regedit.exe"
Editing autoloading using the program
You can also edit the autoload using the CCleaner utility, which I told in the article. In this program by Quick and high-quality computer cleaning, I. startup editor. For free by the way you can download it.
Install it, open and move on to the left of the tab Service and. Choose a program that is not needed and choose to turn off (if you want to turn it on later) or delete if you are sure that it will never need it in the startup.
That's all. There is of course a way to disconnect through group Policy But we will talk about her in a special article. Now I hope the computer will not wait for yourself 🙂
IT NOT A Secret for Anybody That Internet Is The Place Where People Make Money: Somebody Sales Make Money ... Somebody Make Money in Fair Way, Somebody in Unfair ... So Remain Vigilant All Time While Surfing in the Web. Hackers, Who Have Chosen Dishonest Method of Raising Money, Develop Devices to Wind Trustful Users Round and Rip Them Off. They Employ Up-to-Date Root Kit Techniques to Attack The Computer. They Do Not Miss Any Opportunity to Catch The Potential Victim in Their Traps. The Promote Their Badware Anywhere: On Malicious WebSites, Even on Decent Web Pages, Which Have Been Hacked Beore. New Malicious Products APPEAR ALMOST EVERY DAY AND TEND TO INFECT AS MUCH COMPUTERS AS IT IS POSSIBLE. SO Would Recommend You to Be Very Attentive What Links You Install What Programs You Install.
WE FEEL IT IS OUR DUTY TO WARN ALL OUR BLOG READERS ABOUT Windows Command Processor Fake Antispyware Device and Help Them If They Have Got Into Trouble. Now, Please, Read The Short Description How This Pest Behaves and What Bad Things in Does. IT HAS QUITE ATTRACTIVE INTERFACE; IT MIMICS THE BEHAVIOR OF THE REPUTABLE ANTIVIRUS PROGRAMS, SO IT ITS QUITE DIFFICULT TO DETERMINE ITS TRUSTWORTINS.
FIRST, UPON SUCCESSFUL REACHING OF THE TARGET, Windows Command Processor Initiates Fake System Scanning. This Process Looks Rather Persuasive. Upon The Termination of Such Fake Checkup, Windows Command Processor Generates Invented Pre-Programmed Scanning Reports. They State Numerous Threats Allegedly Detected. IT IS NOTHING MORE LIKE WELL DESIGNED TACTIC OF SCARING YOU. The Virus "Warns" You to Neutralize The Suspicious Items As Quick AS Possible. IT OFFERS ITSELF AS AN Excellent Solution for You in this Situation, But First Its Necessary to Purchase Its Commercial Version. Do Not Let Let The Developers of this Malware Deceive You. Needless to TELL THAT NEITHER FULL, NOR TRIAL VERSION IS IN STATE TO DETECT OR REMOVE VIRUSES, BECAUSE IT IS A VIRUS ITSELF.
Never Effect The Payment for This Badware. UNDER NO Circumstances Open Your Private Information, Your Banking Details. IF by Some ReaSons The Payment Is Already Effectedd, Contact Your Bank or Other Payment Processing Company And Dispute All Charges IncurRed by You for the Benefit Of These Criminals. What One SHOULD Do (If His / Her Machine Is Infected With This Parasite) WITHOUT LINGERING IS TO REMOVE Windows Command Processor Scam Immediately, AT The Very First Detection. We Recommend You to Use Gridinsoft Trojan Killer for This Purpose. If Any Questions Regard virus Removal Occur, We Are Always Ready To Answer Them.
Windows Command Processor Automatic Remover:
Windows Command Processor Removal Milestones:
- Through Your Browser Window Download Process Killer. Application ( pkiller.exe.). The Download Link Is
- Save " pkiller.exe."To Your Desktop and Run It Or Run This Program Immediately.
- Once The Malicious Process Offwindows Command Processor Has Been Disabled (Terminated) SHUT DOWN " pkiller.exe."(Process Killer).
- Through Your Browser Window Download.
- Install, UPDATE AND RUN Anti-Virus Software (Trojan Killer).
- Remove All Threats IT Detects During The Scan.
- Reboot Your PC and Repeat The Scan in the Case of Necessity.
Windows Command Processor MANUAL REMOVER:
Delete Windows Command Processor Files:
% APPDATA% \\ NPSWF32.DLL
% APPDATA% \\ inspector-.exe
% Desktopdir% \\ Windows Command Processor.lnk
% CommonPrograms% \\ Windows Command Processor.lnk
Delete Windows Command Processor Registry Files:
HKCU \\ Software \\ Microsoft \\ Windows \\ CurrentVersion \\ Run! INSPECTORDIV CLASS \u003d "DOWNLOADBUTTON"
Very often, the users of the operating system are faced with a long loading or slow work Computer. Often the problem is that auto download windows Too big list of programs started with OS, and need to be removed.
In addition, many viruses that fall on your computer under the guise of files, drivers or softwareare automatically added to this list of executable commands. As a result, strange messages can appear when loading, which cannot be removed, and the operating system can even stop running. Each process can be seen in the task manager to understand which one is so much acting on the workload of the processor, which is a command handler.
Two types of autoload
Everyone came across that Windows immediately after reinstalling simply "flies", but after time it starts working everything slower and slower. First, the user needs to know that there are two list of automatically downloaded processes, and with them two answers to the question: how to delete a program from autoload?
Custom list
It is very easy to edit manually. You can, without any special problems, add a program to autoload, or, remove the files that are not needed. This list is user. There is no way system applications And most of the downloadable services and programs when starting OS. For each user of the operating system, a separate configuration of the Windows startup can be used.
To see and remove the contents, you need to perform the following steps:
- Open menu "Start";
- Choose "All Programs";
You can remove from autoload unnecessary applications And handle their labels, as with conventional files.
System List
In this case, the list of running applications and services is a system configuration. Here you can edit many options for the program and operating system services, such as:
- Selecting the type of launch windows;
- View the contents of the bootloader;
- View major active services;
- Setting up the startup.
Each of these parameters allows you to change the options for loading the operating system. But for starters, let's stop on how to open autoloads to edit a list of tasks affecting the load of RAM and processor handler - a central processor.
How to get into the configurator?
There are many ways to go to the system configuration configuration. To edit the list of triggered files and services.
Method 1. Control Panel
The surest way to find software that can affect changes in the autoloading settings of the operating system is to refer to the control panel.
The "Administration tab" contains the "System Configuration" function.
Method 2. Through the search string
Starting with the seventh windows version, Command "Run" in the "Start" menu replaced search stringwhich allows not only to look for required programs and system services, but is a team handler that allows you to start the desired service. To call the system configurator to configure the startup, the command is suitable: msconfig.
After executing the command, the corresponding window should appear. You need to go to the desired tab.
Unfortunately, you cannot delete the application startup record, you can only disable or enable, removing or putting a tick. It is not always possible to get rid of the virus in this way. Many of them activate inclusion in the next Windows load, thanks to the running service or process.
Method 3. Registry Editor
In a malicious software that fell into your system, best way It will remove it to edit the autoload of the registry. Before you begin changing records, keep in mind that it is necessary to observe maximum care and accuracy. Removing an incorrect key can lead to a completely non-working operating system.
In order to start the registry editor, you must run in the Start menu search row: regedit (task execution window can be called with command line or a combination of Win + R keys).
Edit parameters, delete or add a program to autoload for a user under which you are registered in the system are now in line:
- HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run
- HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Runonce
Add a program to autoloading to general registry entries can be on the same path. They are located in the HKEY_LOCAL_MACHINE folder
Additional software
Disable the autoload of the application with the ability to remove records entirely as well as the registry cleaner after that, specialized programs allow. This is quite a lot, and the choice depends only on you. Software greatly facilitates the user's task in setting up the startup and can get rid of unnecessary actions. Take, for example, the CCleaner program.
If the question arose: how to turn off the startup through the software, then it is simple enough. It is in the "Service" menu and allows you to remove unnecessary applications and files automatically downloaded not only with Windows, but also with one of the browsers.
It is very convenient due to the fact that most viruses are fixed in the form of plug-ins, so find them and deleted becomes almost unrealistic. After cleaning such a parameter as autoloading programs in Windows, it is recommended to clean the registry in automatic mode. It is also possible to completely remove all temporary files from the system, including COOCKIE, which may contain malicious code.
Outcome:
Thus, with the help of specialized software, periodically using it, it is possible to easily follow the inspection of the OS and the registry, not to allow extra in the system list, such as the autoload in Windows, which will take only 5-10 minutes per day.
At the very first signs of the system overload, check the parameters automatic launch and running processes. In order to see them, you need to enter the Task Manager. Look, it creates a load on rAM and processor. Then you can find the application that you want to disable or optimize.
